Commit graph

1,464,522 commits

Author SHA1 Message Date
Bjorn Helgaas
30579eebba PCI/ASPM: Convert quirks to override advertised link states
Existing quirks to disable ASPM L0s and L1 use pci_disable_link_state(),
which disables ASPM states and prevents their use in the future.  But since
they are FINAL quirks, they happen after ASPM has already been enabled.
Here's a typical call path:

  pci_host_probe
    pci_scan_root_bus_bridge
      pci_scan_child_bus
        pci_scan_slot
          pci_scan_single_device
            pci_device_add
              pci_fixup_device(pci_fixup_header)  # HEADER quirks
          pcie_aspm_init_link_state
            pcie_config_aspm_path
              pcie_config_aspm_link
                pcie_config_aspm_dev              # ASPM may be enabled
    pci_bus_add_devices
      pci_bus_add_devices
        pci_fixup_device(pci_fixup_final)         # FINAL quirks
          quirk_disable_aspm_l0s
            pci_disable_link_state(dev, PCIE_LINK_STATE_L0S)

Sometimes enabling ASPM can make the link non-functional, so if we know
ASPM is broken on a device, we shouldn't enable it at all, even
temporarily.

Convert the existing quirks to use pcie_aspm_remove_cap() instead, which
overrides the ASPM Support advertised in PCIe Link Capabilities, and make
them HEADER quirks so they run before pcie_aspm_init_link_state() has a
chance to enable ASPM.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-4-helgaas@kernel.org
2025-11-12 18:51:39 -06:00
Bjorn Helgaas
575b98e39d PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
Add pcie_aspm_remove_cap().  A quirk can use this to prevent use of ASPM
L0s or L1 link states, even if the device advertised support for them.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-3-helgaas@kernel.org
2025-11-12 18:51:27 -06:00
Bjorn Helgaas
4495bffd86 PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
Defective devices sometimes advertise support for ASPM L0s or L1 states
even if they don't work correctly.

Cache the L0s Supported and L1 Supported bits early in enumeration so
HEADER quirks can override the ASPM states advertised in Link Capabilities
before pcie_aspm_cap_init() enables ASPM.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-2-helgaas@kernel.org
2025-11-12 18:47:16 -06:00
Haotian Zhang
360b3730f8
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
rsnd_ssiu_probe() leaks an OF node reference obtained by
rsnd_ssiu_of_node(). The node reference is acquired but
never released across all return paths.

Fix it by declaring the device node with the __free(device_node)
cleanup construct to ensure automatic release when the variable goes
out of scope.

Fixes: 4e7788fb80 ("ASoC: rsnd: add SSIU BUSIF support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20251112065709.1522-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-11-13 00:36:01 +00:00
Sean Christopherson
6276c67f2b x86: Restrict KVM-induced symbol exports to KVM modules where obvious/possible
Extend KVM's export macro framework to provide EXPORT_SYMBOL_FOR_KVM(),
and use the helper macro to export symbols for KVM throughout x86 if and
only if KVM will build one or more modules, and only for those modules.

To avoid unnecessary exports when CONFIG_KVM=m but kvm.ko will not be
built (because no vendor modules are selected), let arch code #define
EXPORT_SYMBOL_FOR_KVM to suppress/override the exports.

Note, the set of symbols to restrict to KVM was generated by manual search
and audit; any "misses" are due to human error, not some grand plan.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112173944.1380633-5-seanjc%40google.com
2025-11-12 15:29:38 -08:00
Sean Christopherson
e6f2d5866c x86/mm: Drop unnecessary export of "ptdump_walk_pgd_level_debugfs"
Don't export "ptdump_walk_pgd_level_debugfs" as its sole user is
arch/x86/mm/debug_pagetables.c, which can't be built as a module.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251112173944.1380633-4-seanjc%40google.com
2025-11-12 15:24:42 -08:00
Sean Christopherson
9c26c91e10 x86/mtrr: Drop unnecessary export of "mtrr_state"
Don't export "mtrr_state" as usage is limited to arch/x86/kernel/cpu/mtrr
(and nothing outside of that directory even includes the local mtrr.h).

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251112173944.1380633-3-seanjc%40google.com
2025-11-12 15:24:42 -08:00
Sean Christopherson
ed02882460 x86/bugs: Drop unnecessary export of "x86_spec_ctrl_base"
Don't export x86_spec_ctrl_base as it's used only in bugs.c and process.c,
neither of which can be built into a module.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251112173944.1380633-2-seanjc%40google.com
2025-11-12 15:24:42 -08:00
Martin K. Petersen
d204087a59 Merge patch series "qla2xxx target mode improvements"
Tony Battersby <tonyb@cybernetics.com> says:

This patch series improves the qla2xxx FC driver in target mode. I
developed these patches using the out-of-tree SCST target-mode
subsystem (https://scst.sourceforge.net/), although most of the
improvements will also apply to the other target-mode subsystems such
as the in-tree LIO.  Unfortunately qla2xxx+LIO does not pass all of my
tests, but my patches do not make it any worse (results below). These
patches have been well-tested at my employer with qla2xxx+SCST in both
initiator mode and target mode and with a variety of FC HBAs and
initiators. Since SCST is out-of-tree, some of the patches have parts
that apply in-tree and other parts that apply out-of-tree to SCST. The
SCST patches can be found in the v2 posting linked above.

All patches apply to linux 6.17 and SCST 3.10 master branch.

Summary of patches:
- bugfixes
- cleanups
- improve handling of aborts and task management requests
- improve log message
- add back SLER / SRR support (removed in 2017)

Some of these patches improve handling of aborts and task management
requests. This is some of the testing that I did:

Test 1: Use /dev/sg to queue random disk I/O with short timeouts; make
sure cmds are aborted successfully.
Test 2: Queue lots of disk I/O, then use "sg_reset -N -d /dev/sg" on
initiator to reset logical unit.
Test 3: Queue lots of disk I/O, then use "sg_reset -N -t /dev/sg" on
initiator to reset target.
Test 4: Queue lots of disk I/O, then use "sg_reset -N -b /dev/sg" on
initiator to reset bus.
Test 5: Queue lots of disk I/O, then use "sg_reset -N -H /dev/sg" on
initiator to reset host.
Test 6: Use fiber channel attenuator to trigger SRR during
write/read/compare test; check data integrity.

With my patches, SCST passes all of these tests.

Results with in-tree LIO target-mode subsystem:

Test 1: Seems to abort the same cmd multiple times (both
qlt_24xx_retry_term_exchange() and __qlt_send_term_exchange()). But
cmds get aborted, so give it a pass?

Test 2: Seems to work; cmds are aborted.

Test 3: Target reset doesn't seem to abort cmds, instead, a few seconds
later:
qla2xxx [0000:04:00.0]-f058:9: qla_target(0): tag 1314312, op 2a: CTIO
with TIMEOUT status 0xb received (state 1, port 51:40:2e:c0:18:1d:9f:cc,
LUN 0)

Tests 4 and 5: The initiator is unable to log back in to the target; the
following messages are repeated over and over on the target:
qla2xxx [0000:04:00.0]-e01c:9: Sending TERM ELS CTIO (ha=00000000f8811390)
qla2xxx [0000:04:00.0]-f097:9: Linking sess 000000008df5aba8 [0] wwn
51:40:2e:c0:18:1d:9f:cc with PLOGI ACK to wwn 51:40:2e:c0:18:1d:9f:cc
s_id 00:00:01, ref=2 pla 00000000835a9271 link 0

Test 6: passes with my patches; SRR not supported previously.

So qla2xxx+LIO seems a bit flaky when handling exceptions, but my
patches do not make it any worse. Perhaps someone who is more familiar
with LIO can look at the difference between LIO and SCST and figure out
how to improve it.

Tony Battersby
https://www.cybernetics.com/

v1: https://lore.kernel.org/r/f8977250-638c-4d7d-ac0c-65f742b8d535@cybernetics.com/
v2: https://lore.kernel.org/linux-scsi/e95ee7d0-3580-4124-b854-7f73ca3a3a84@cybernetics.com/
Link: https://patch.msgid.link/aaea0ab0-da8b-4153-9369-60db7507ff7a@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:50 -05:00
Tony Battersby
4f5eb50f7c scsi: qla2xxx: target: Improve safety of cmd lookup by handle
The driver associates two different structs with numeric handles and
passes the handles to the hardware.  When the hardware passes the handle
back to the driver, the driver consults a table of void * to convert the
handle back to the struct without checking the type of struct.  This can
lead to type confusion if the HBA firmware misbehaves (and some firmware
versions do).  So verify the type of struct is what is expected before
using it.

But we can also do better than that.  Also verify that the exchange
address of the message sent from the hardware matches the exchange
address of the command being returned.  This adds an extra guard against
buggy HBA firmware that returns duplicate messages multiple times (which
has also been seen) in case the driver has reused the handle for a
different command of the same type.

These problems were seen on a QLE2694L with firmware 9.08.02 when
testing SLER / SRR support.  The SRR caused the HBA to flood the
response queue with hundreds of bogus entries.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/7c7cb574-fe62-42ae-b800-d136d8dd89ca@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
c7bd85a7b9 scsi: qla2xxx: target: Add back SRR support
Background: loading qla2xxx with "ql2xtgt_tape_enable=1" enables
Sequence Level Error Recovery (SLER), which is most commonly used for
tape drives.  With SLER enabled, if there is a recoverable I/O error
during a SCSI command, a Sequence Retransmission Request (SRR) will be
used to retry the I/O at a low-level completely within the driver
without propagating the error to the upper levels of the SCSI stack.

SRR support was removed in 2017 by commit 2c39b5ca2a ("qla2xxx: Remove
SRR code"). Add it back, new and improved.

The old removed SRR code used sequence numbers to correlate the SRR
CTIOs with SRR immediate notify messages.  I don't see how that would
work reliably with MSI-X interrupts and multiple queues.  So instead use
the exchange address to find the command associated with the immediate
notify (qlt_srr_to_cmd).

The old removed SRR code had a function qlt_check_srr_debug() to
simulate a SRR, but it didn't work for me.  Instead I just used fiber
optic attenuators attached to the FC cable to reduce the strength of the
signal and induce errors.  Unfortunately this only worked for inducing
SRRs on Data-Out (write) commands, so that is all I was able to test.

The code to build a new scatterlist for a SRR with nonzero offset has
been improved to reduce memory requirements and has been well-tested.
However it does not support protection information.

When a single cmd gets multiple SRRs, the old removed SRR code would
restore the data buffer from the values in cmd->se_cmd before processing
the new SRR.  That might be needed if the offset for the new SRR was
lower than the offset for the previous SRR, but I am not sure if that
can happen.  In my testing, when a single cmd gets multiple SRRs, the
SRR offset always increases or stays the same.  But in case it can
decrease, I added the function qlt_restore_orig_sg().  If this is not
supposed to happen then qlt_restore_orig_sg() can be removed to simplify
the code.

I ran into some HBA firmware bugs with QLE269x, QLE27xx, and QLE28xx
firmware 9.05.xx - 9.08.xx where a SRR would cause the HBA to misbehave
badly.  Since SRRs are rare and therefore difficult to test, I figured
it would be worth checking for the buggy firmware and disabling SLER
with a warning instead of letting others run into the same problem on
the rare occasion that they get a SRR.  This turned out to be difficult
because the firmware version isn't known in the normal NVRAM config
routine, so I added a second NVRAM config routine that is called after
the firmware version is known.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/654b7181-b79e-40ed-a15b-6d6e441a5d5f@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
04957d8c98 scsi: qla2xxx: target: Improve cmd logging
- Add the command tag to various messages so that different messages
   about the same command can be correlated.

 - For CTIO errors (i.e. when the HW reports an error about a cmd),
   print the cmd tag, opcode, state, initiator WWPN, and LUN.  This info
   helps an administrator determine what is going wrong.

 - When a command experiences a transport error, log a message when it
   is freed.  This makes debugging exceptions easier.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/c579987d-5658-41ae-9653-f0e58c9d1880@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
f4199d5812 scsi: qla2xxx: target: Add cmd->rsp_sent
Add cmd->rsp_sent to indicate that the SCSI status has been sent
successfully, so that SCST can be informed of any transport errors.
This will also be used for logging in later patches.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/d4b0203f-7817-4517-9789-5866bb24fad7@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
091719c21d scsi: qla2xxx: target: Fix invalid memory access with big CDBs
struct atio7_fcp_cmnd is a variable-length data structure because of
add_cdb_len, but it is embedded in struct atio_from_isp and copied
around like a fixed-length data structure.  For big CDBs > 16 bytes,
get_datalen_for_atio() called on a fixed-length copy of the atio will
access invalid memory.

In some cases this can be fixed by moving the atio to the end of the
data structure and using a variable-length allocation.  In other cases
such as allocating struct qla_tgt_cmd, the fixed-length data structures
are preallocated for speed, so in the case that add_cdb_len != 0,
allocate a separate buffer for the CDB.  Also add memcpy_atio() as a
safeguard against invalid memory accesses.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/306a9d0b-3c89-42fc-a69c-eebca8171347@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
3d56983cc6 scsi: qla2xxx: Fix TMR failure handling
(target mode)

If handle_tmr() fails:

 - The code for QLA_TGT_ABTS results in memory-use-after-free and
   double-free:
	qlt_do_tmr_work()
		qlt_build_abts_resp_iocb()
			qpair->req->outstanding_cmds[h] = (srb_t *)mcmd;
		mempool_free(mcmd, qla_tgt_mgmt_cmd_mempool); FIRST FREE
	qlt_handle_abts_completion()
		mcmd = qlt_ctio_to_cmd()
			cmd = req->outstanding_cmds[h];
			return cmd;
		vha  = mcmd->vha; USE-AFTER-FREE
		ha->tgt.tgt_ops->free_mcmd(mcmd); SECOND FREE

 - qlt_send_busy() makes no sense because it sends a SCSI command
   response instead of a TMR response.

Instead just call qlt_xmit_tm_rsp() to send a TMR failed response, since
that code is well-tested and handles a number of corner cases.  But it
would be incorrect to call ha->tgt.tgt_ops->free_mcmd() after
handle_tmr() failed, so add a flag to mcmd indicating the proper way to
free the mcmd so that qlt_xmit_tm_rsp() can be used for both cases.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/09a1ff3d-6738-4953-a31b-10e89c540462@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
5c50d84798 scsi: qla2xxx: target: Improve checks in qlt_xmit_response() / qlt_rdy_to_xfer()
Similar fixes to both functions:

qlt_xmit_response:

 - If the cmd cannot be processed, remember to call ->free_cmd() to
   prevent the target-mode midlevel from seeing a cmd lockup.

 - Do not try to send the response if the exchange has been terminated.

 - Check for chip reset once after lock instead of both before and after
   lock.

 - Give errors from qlt_pre_xmit_response() a lower priority to
   compensate for removing the first check for chip reset.

qlt_rdy_to_xfer:

 - Check for chip reset after lock instead of before lock to avoid
   races.

 - Do not try to receive data if the exchange has been terminated.

 - Give errors from qlt_pci_map_calc_cnt() a lower priority to
   compensate for moving the check for chip reset.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/cd6ccd31-33fa-4454-be36-507bf578a546@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
17488f1390 scsi: qla2xxx: target: Fix races with aborting commands
cmd->cmd_lock only protects cmd->aborted, but when deciding how to
process a cmd, it is necessary to consider other factors such as
cmd->state and if the chip has been reset, which are protected by
qpair->qp_lock_ptr.  So replace cmd_lock with qp_lock_ptr, whick makes
it possible to check additional values and make decisions about what to
do without racing with the CTIO handler and other code.

 - Lock cmd->qpair->qp_lock_ptr when aborting a cmd.

 - Eliminate cmd->cmd_lock and change cmd->aborted to a bitfield since
   it is now protected by qp_lock_ptr just like all the other flags.

 - Add another command state QLA_TGT_STATE_DONE to avoid any possible
   races between qlt_abort_cmd() and tgt_ops->free_cmd().

 - Add the cmd->sent_term_exchg flag to indicate if
   qlt_send_term_exchange() has already been called.

 - Export qlt_send_term_exchange() for SCST so that it can be called
   directly instead of trying to make qlt_abort_cmd() work for both TMR
   abort and HW timeout.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/2c8d03e4-308b-4d5a-a418-a334be23f815@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:28 -05:00
Tony Battersby
d46c69a087 scsi: qla2xxx: Clear cmds after chip reset
Commit aefed3e554 ("scsi: qla2xxx: target: Fix offline port handling
and host reset handling") caused two problems:

1. Commands sent to FW, after chip reset got stuck and never freed as FW
   is not going to respond to them anymore.

2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd().  Commit 26f9ce5381
   ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands")
   attempted to fix this, but introduced another bug under different
   circumstances when two different CPUs were racing to call
   qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in
   dma_unmap_sg_attrs().

So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" and
partially revert "scsi: qla2xxx: target: Fix offline port handling and
host reset handling" at __qla2x00_abort_all_cmds.

Fixes: aefed3e554 ("scsi: qla2xxx: target: Fix offline port handling and host reset handling")
Fixes: 26f9ce5381 ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands")
Co-developed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/0e7e5d26-e7a0-42d1-8235-40eeb27f3e98@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:17:03 -05:00
Martin K. Petersen
ab57a18665 Merge patch series "Optimize the hot path in the UFS driver"
Bart Van Assche <bvanassche@acm.org> says:

Hi Martin,

This patch series optimizes the hot path of the UFS driver by making
struct scsi_cmnd and struct ufshcd_lrb adjacent. Making these two data
structures adjacent is realized as follows:

@@ -9040,6 +9046,7 @@ static const struct scsi_host_template ufshcd_driver_template = {
     .name           = UFSHCD,
     .proc_name      = UFSHCD,
     .map_queues     = ufshcd_map_queues,
+    .cmd_size       = sizeof(struct ufshcd_lrb),
     .init_cmd_priv  = ufshcd_init_cmd_priv,
     .queuecommand   = ufshcd_queuecommand,
     .mq_poll        = ufshcd_poll,

The following changes had to be made prior to making these two data
structures adjacent:
* Add support for driver-internal and reserved commands in the SCSI core.
* Instead of making the reserved command slot (hba->reserved_slot)
  invisible to the SCSI core, let the SCSI core allocate a reserved command.
* Remove all UFS data structure members that are no longer needed
  because struct scsi_cmnd and struct ufshcd_lrb are now adjacent
* Call ufshcd_init_lrb() from inside the code for queueing a command instead of
  calling this function before I/O starts. This is necessary because
  ufshcd_memory_alloc() allocates fewer instances than the block layer
  allocates requests. See also the following code in the block layer
  core:

    if (blk_mq_init_request(set, hctx->fq->flush_rq, hctx_idx,
                hctx->numa_node))

  Although the UFS driver could be modified such that ufshcd_init_lrb()
  is called from ufshcd_init_cmd_priv(), realizing this would require
  moving the memory allocations that happen from inside
  ufshcd_memory_alloc() into ufshcd_init_cmd_priv(). That would make
  this patch series even larger. Although ufshcd_init_lrb() is called for each
  command, the benefits of reduced indirection and better cache efficiency
  outweigh the small overhead of per-command lrb initialization.
* ufshcd_add_scsi_host() happens now before any device management
  commands are submitted. This change is necessary because this patch
  makes device management command allocation happen when the SCSI host
  is allocated.
* Allocate as many command slots as the host controller supports. Decrease
  host->cmds_per_lun if necessary once it is clear whether or not the UFS
  device supports less command slots than the host controller.

Please consider this patch series for the next merge window.

Thanks,

Bart.

Link: https://patch.msgid.link/20251031204029.2883185-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:16:05 -05:00
Mika Westerberg
044b9f1a7f PCI/PTM: Enable only if device advertises relevant role
We have a Switch Upstream Port (2b:00.0) that has a PTM Capability, but
doesn't advertise support for any PTM roles:

  Capabilities: [220 v1] Precision Time Measurement
                PTMCap: Requester- Responder- Root-

Linux enables PTM without looking into what roles it actually supports, and
apparently the Port immediately sends PTM Requests even though it doesn't
support the PTM Requester role. The messages include an invalid bus number,
so the Root Port detects an ACS Violation (see the PCIe r7.0, sec 6.12.1.1,
implementation note):

  pci 0000:2b:00.0: [8086:5786] type 01 class 0x060400 PCIe Switch Upstream Port
  pci 0000:2b:00.0: PTM enabled, 4ns granularity
  pcieport 0000:00:07.1: AER: Multiple Uncorrectable (Non-Fatal) error message received from 0000:00:07.1
  pcieport 0000:00:07.1: PCIe Bus Error: severity=Uncorrectable (Non-Fatal), type=Transaction Layer, (Receiver ID)
  pcieport 0000:00:07.1:   device [8086:e44f] error status/mask=00200000/00000000
  pcieport 0000:00:07.1:    [21] ACSViol                (First)
  pcieport 0000:00:07.1: AER:   TLP Header: 0x34000000 0x00000052 0x00000000 0x00000000

The TLP Header shows a 4 DW header, no data (001b) Msg with Local routing
(1 0100b) with Requester ID 0x0000 and PTM Request code (0x52).

Fix this by enabling PTM only if the following conditions are true (see sec
6.21.1 figure 6-21):

  - Endpoint must advertise PTM Requester Capable

  - Switch Upstream Port must advertise PTM Responder Capable

  - Root Port must advertise PTM Root Capable

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: commit log, comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251112074614.1440266-1-mika.westerberg@linux.intel.com
2025-11-12 17:11:15 -06:00
Tony Battersby
ed382b95f5 scsi: qla2xxx: target: Fix term exchange when cmd_sent_to_fw == 1
Properly set the nport_handle field of the terminate exchange message.
Previously when this field was not set properly, the term exchange would
fail when cmd_sent_to_fw == 1 but work when cmd_sent_to_fw == 0 (i.e. it
would fail when the HW was actively transferring data or status for the
cmd but work when the HW was idle).  With this change, term exchange
works in any cmd state, which now makes it possible to abort a command
that is locked up in the HW.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/1a221699-969b-4f28-8ea4-395d2f7a7c0a@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
c34e373f53 scsi: qla2xxx: target: Improve debug output for term exchange
Print better debug info when terminating a command, and print the
response status from the hardware.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/22f8a0b6-0e24-474d-9f28-9d65c9b7af03@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
9da4e1dcea scsi: qla2xxx: target: Remove code for unsupported hardware
As far as I can tell, CONTINUE_TGT_IO_TYPE and CTIO_A64_TYPE are message
types from non-FWI2 boards (older than ISP24xx), which are not supported
by qla_target.c.  Removing them makes it possible to turn a void * into
the real type and avoid some typecasts.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/cb006628-e321-4e30-a60b-08b37b8685a5@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
957aa59749 scsi: qla2xxx: Use reinit_completion on mbx_intr_comp
If a mailbox command completes immediately after
wait_for_completion_timeout() times out, ha->mbx_intr_comp could be left
in an inconsistent state, causing the next mailbox command not to wait
for the hardware.  Fix by reinitializing the completion before use.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/11b6485e-0bfd-4784-8f99-c06a196dad94@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
4f6aaade2a scsi: qla2xxx: Fix lost interrupts with qlini_mode=disabled
When qla2xxx is loaded with qlini_mode=disabled,
ha->flags.disable_msix_handshake is used before it is set, resulting in
the wrong interrupt handler being used on certain HBAs
(qla2xxx_msix_rsp_q_hs() is used when qla2xxx_msix_rsp_q() should be
used).  The only difference between these two interrupt handlers is that
the _hs() version writes to a register to clear the "RISC" interrupt,
whereas the other version does not.  So this bug results in the RISC
interrupt being cleared when it should not be.  This occasionally causes
a different interrupt handler qla24xx_msix_default() for a different
vector to see ((stat & HSRX_RISC_INT) == 0) and ignore its interrupt,
which then causes problems like:

qla2xxx [0000:02:00.0]-d04c:6: MBX Command timeout for cmd 20,
  iocontrol=8 jiffies=1090c0300 mb[0-3]=[0x4000 0x0 0x40 0xda] mb7 0x500
  host_status 0x40000010 hccr 0x3f00
qla2xxx [0000:02:00.0]-101e:6: Mailbox cmd timeout occurred, cmd=0x20,
  mb[0]=0x20. Scheduling ISP abort
(the cmd varies; sometimes it is 0x20, 0x22, 0x54, 0x5a, 0x5d, or 0x6a)

This problem can be reproduced with a 16 or 32 Gbps HBA by loading
qla2xxx with qlini_mode=disabled and running a high IOPS test while
triggering frequent RSCN database change events.

While analyzing the problem I discovered that even with
disable_msix_handshake forced to 0, it is not necessary to clear the
RISC interrupt from qla2xxx_msix_rsp_q_hs() (more below).  So just
completely remove qla2xxx_msix_rsp_q_hs() and the logic for selecting
it, which also fixes the bug with qlini_mode=disabled.

The test below describes the justification for not needing
qla2xxx_msix_rsp_q_hs():

Force disable_msix_handshake to 0:
qla24xx_config_rings():
if (0 && (ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
    (ha->flags.msix_enabled)) {

In qla24xx_msix_rsp_q() and qla2xxx_msix_rsp_q_hs(), check:
  (rd_reg_dword(&reg->host_status) & HSRX_RISC_INT)

Count the number of calls to each function with HSRX_RISC_INT set and
the number with HSRX_RISC_INT not set while performing some I/O.

If qla2xxx_msix_rsp_q_hs() clears the RISC interrupt (original code):
qla24xx_msix_rsp_q:    50% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs:  5% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
    (# of qla24xx_msix_rsp_q interrupts) * 3

If qla2xxx_msix_rsp_q_hs() does not clear the RISC interrupt (patched
code):
qla24xx_msix_rsp_q:    100% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs:   9% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
    (# of qla24xx_msix_rsp_q interrupts) * 3

In the case of the original code, qla24xx_msix_rsp_q() was seeing
HSRX_RISC_INT set only 50% of the time because qla2xxx_msix_rsp_q_hs()
was clearing it when it shouldn't have been.  In the patched code,
qla24xx_msix_rsp_q() sees HSRX_RISC_INT set 100% of the time, which
makes sense if that interrupt handler needs to clear the RISC interrupt
(which it does).  qla2xxx_msix_rsp_q_hs() sees HSRX_RISC_INT only 9% of
the time, which is just overlap from the other interrupt during the
high IOPS test.

Tested with SCST on:
QLE2742  FW:v9.08.02 (32 Gbps 2-port)
QLE2694L FW:v9.10.11 (16 Gbps 4-port)
QLE2694L FW:v9.08.02 (16 Gbps 4-port)
QLE2672  FW:v8.07.12 (16 Gbps 2-port)
both initiator and target mode

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/56d378eb-14ad-49c7-bae9-c649b6c7691e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
8f58fc64d5 scsi: qla2xxx: Fix initiator mode with qlini_mode=exclusive
When given the module parameter qlini_mode=exclusive, qla2xxx in
initiator mode is initially unable to successfully send SCSI commands to
devices it finds while scanning, resulting in an escalating series of
resets until an adapter reset clears the issue.  Fix by checking the
active mode instead of the module parameter.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/1715ec14-ba9a-45dc-9cf2-d41aa6b81b5e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Tony Battersby
b57fbc8871 scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"
This reverts commit 0367076b08.

The commit being reverted added code to __qla2x00_abort_all_cmds() to
call sp->done() without holding a spinlock.  But unlike the older code
below it, this new code failed to check sp->cmd_type and just assumed
TYPE_SRB, which results in a jump to an invalid pointer in target-mode
with TYPE_TGT_CMD:

qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success
  0000000009f7a79b
qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h
  mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h.
qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer
qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event
  0x8002 occurred
qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery -
  ha=0000000058183fda.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor instruction fetch in kernel mode
PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G           O       6.1.133 #1
Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206
RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000
RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0
RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045
R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40
R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400
FS:  0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? __die+0x4d/0x8b
 ? page_fault_oops+0x91/0x180
 ? trace_buffer_unlock_commit_regs+0x38/0x1a0
 ? exc_page_fault+0x391/0x5e0
 ? asm_exc_page_fault+0x22/0x30
 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst]
 qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst]
 qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst]
 qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst]
 qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst]
 kthread+0xa8/0xd0
 </TASK>

Then commit 4475afa264 ("scsi: qla2xxx: Complete command early within
lock") added the spinlock back, because not having the lock caused a
race and a crash.  But qla2x00_abort_srb() in the switch below already
checks for qla2x00_chip_is_down() and handles it the same way, so the
code above the switch is now redundant and still buggy in target-mode.
Remove it.

Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/3a8022dc-bcfd-4b01-9f9b-7a9ec61fa2a3@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-11-12 18:07:50 -05:00
Sk Anirban
6b74d0a5e2
drm/xe/guc: Eliminate RPa frequency caching
Remove the cached pc->rpa_freq field and refactor RPA frequency handling
to fetch values directly from hardware registers on each request.

v2: Check graphics version instead of platform (Rodrigo)
v3: Fix graphics version check (Badal)

Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251112185153.3593145-6-sk.anirban@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-11-12 18:05:52 -05:00
Sk Anirban
2917e17b5f
drm/xe/guc: Eliminate RPe caching for SLPC parameter handling
RPe is runtime-determined by PCODE and caching it caused stale values,
leading to incorrect GuC SLPC parameter settings.
Drop the cached rpe_freq field and query fresh values from hardware
on each use to ensure GuC SLPC parameters reflect current RPe.

v2: Remove cached RPe frequency field (Rodrigo)
v3: Remove extra variable (Vinay)
    Modify function name (Vinay)
v4: Maintain a separate function for PVC (Rodrigo)
v5: Avoid RPn update while fetching RPe frequency (Rodrigo)
v6: Split platform-specific RPe comments (Vinay)

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5166
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20251112185153.3593145-5-sk.anirban@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-11-12 18:05:52 -05:00
Jason Gunthorpe
56c069307d vfio: Remove the get_region_info op
No driver uses it now, all are using get_region_info_caps().

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/22-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:06:41 -07:00
Jason Gunthorpe
dc10734610 vfio: Move the remaining drivers to get_region_info_caps
Remove the duplicate code and change info to a pointer. caps are not used.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/21-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:06:41 -07:00
Jason Gunthorpe
182c62861b vfio/platform: Convert to get_region_info_caps
Remove the duplicate code and change info to a pointer. caps are not used.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:06:41 -07:00
Jason Gunthorpe
1b0ecb5baf vfio/pci: Convert all PCI drivers to get_region_info_caps
Since the core function signature changes it has to flow up to all
drivers.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/19-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:06:40 -07:00
Jason Gunthorpe
973af0c40e vfio/ccw: Convert to get_region_info_caps
Remove the duplicate code and flatten the call chain.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/18-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:03 -07:00
Jason Gunthorpe
93165757c0 vfio/gvt: Convert to get_region_info_caps
Remove the duplicate code and change info to a pointer.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/17-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:03 -07:00
Jason Gunthorpe
45f9fa1810 vfio/mbochs: Convert mbochs to use vfio_info_add_capability()
This driver open codes the cap chain manipulations. Instead use
vfio_info_add_capability() and the get_region_info_caps() op.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
775f726a74 vfio: Add get_region_info_caps op
This op does the copy to/from user for the info and can return back
a cap chain through a vfio_info_cap * result.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/15-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
f978595038 vfio: Require drivers to implement get_region_info
Remove the fallback through the ioctl callback, no drivers use this now.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
e664067b60 vfio/gvt: Provide a get_region_info op
Move it out of intel_vgpu_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
61b3f7b5a7 vfio/ccw: Provide a get_region_info op
Move it out of vfio_ccw_mdev_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/12-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
b9827eff6b vfio/cdx: Provide a get_region_info op
Change the signature of vfio_cdx_ioctl_get_region_info() and hook it to
the op.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
6cdae5d0c3 vfio/fsl: Provide a get_region_info op
Move it out of vfio_fsl_mc_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
d4635df279 vfio/platform: Provide a get_region_info op
Move it out of vfio_platform_ioctl() and re-indent it. Add it to all
platform drivers.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
8339fccda8 vfio/mbochs: Provide a get_region_info op
Move it out of mbochs_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
cf16acc0af vfio/mdpy: Provide a get_region_info op
Move it out of mdpy_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
0787755271 vfio/mtty: Provide a get_region_info op
Move it out of mtty_ioctl() and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
f3fddb71dd vfio/pci: Fill in the missing get_region_info ops
Now that every variant driver provides a get_region_info op remove the
ioctl based dispatch from vfio_pci_core_ioctl().

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
5ac7206474 vfio/nvgrace: Convert to the get_region_info op
Change the signature of nvgrace_gpu_ioctl_get_region_info()

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
c044eefa47 vfio/virtio: Convert to the get_region_info op
Remove virtiovf_vfio_pci_core_ioctl() and change the signature of
virtiovf_pci_ioctl_get_region_info().

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:02 -07:00
Jason Gunthorpe
e238f147d5 vfio/hisi: Convert to the get_region_info op
Change the function signature of hisi_acc_vfio_pci_ioctl()
and re-indent it.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12 15:05:01 -07:00