The dl_server time accounting code is a little odd. The normal scheduler
pattern is to update curr before doing something, such that the old state is
fully accounted before changing state.
Notably, the dl_server_timer() needs to propagate the current time accounting
since the current task could be ran by dl_server and thus this can affect
dl_se->runtime. Similarly for dl_server_start().
And since the (deferred) dl_server wants idle time accounted, rework
sched_idle_class time accounting to be more like all the others.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251020141130.GJ3245006@noisy.programming.kicks-ass.net
Since commit d4c64207b8 ("sched: Cleanup the sched_change NOCLOCK usage"),
update_rq_clock() is called in do_set_cpus_allowed() -> sched_change_begin()
to update the rq clock. This results in a duplicate call update_rq_clock()
in __set_cpus_allowed_ptr_locked().
While holding the rq lock and before calling do_set_cpus_allowed(),
there is nothing that depends on an updated rq_clock.
Therefore, remove the redundant update_rq_clock() in
__set_cpus_allowed_ptr_locked() to avoid the warning about double
rq clock updates.
Fixes: d4c64207b8 ("sched: Cleanup the sched_change NOCLOCK usage")
Signed-off-by: Hao Jia <jiahao1@lixiang.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20251029093655.31252-1-jiahao.kernel@gmail.com
Basically, from the constraint that the sum of lag is zero, you can
infer that the 0-lag point is the weighted average of the individual
vruntime, which is what we're trying to compute:
\Sum w_i * v_i
avg = --------------
\Sum w_i
Now, since vruntime takes the whole u64 (worse, it wraps), this
multiplication term in the numerator is not something we can compute;
instead we do the min_vruntime (v0 henceforth) thing like:
v_i = (v_i - v0) + v0
This does two things:
- it keeps the key: (v_i - v0) 'small';
- it creates a relative 0-point in the modular space.
If you do that subtitution and work it all out, you end up with:
\Sum w_i * (v_i - v0)
avg = --------------------- + v0
\Sum w_i
Since you cannot very well track a ratio like that (and not suffer
terrible numerical problems) we simpy track the numerator and
denominator individually and only perform the division when strictly
needed.
Notably, the numerator lives in cfs_rq->avg_vruntime and the denominator
lives in cfs_rq->avg_load.
The one extra 'funny' is that these numbers track the entities in the
tree, and current is typically outside of the tree, so avg_vruntime()
adds current when needed before doing the division.
(vruntime_eligible() elides the division by cross-wise multiplication)
Anyway, as mentioned above, we currently use the CFS era min_vruntime
for this purpose. However, this thing can only move forward, while the
above avg can in fact move backward (when a non-eligible task leaves,
the average becomes smaller), this can cause trouble when through
happenstance (or construction) these values drift far enough apart to
wreck the game.
Replace cfs_rq::min_vruntime with cfs_rq::zero_vruntime which is kept
near/at avg_vruntime, following its motion.
The down-side is that this requires computing the avg more often.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251106111741.GC4068168@noisy.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Early return true if the core cookie matches. This avoids the SMT mask
loop to check for an idle core, which might be more expensive on wide
platforms.
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://patch.msgid.link/20251105152538.470586-1-sieberf@amazon.com
When executing a task in proxy context, handle yields as if they were
requested by the donor task. This matches the traditional PI semantics
of yield() as well.
This avoids scenario like proxy task yielding, pick next task selecting the
same previous blocked donor, running the proxy task again, etc.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202510211205.1e0f5223-lkp@intel.com
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251106104022.195157-1-sieberf@amazon.com
Based on past discussions it seems like integration of YNL into
iproute2 is unlikely. YNL itself is not great as a C library,
since it has no backward compat (we routinely change types).
Most of the operations can be performed with the generic Python
CLI directly. There is, however, a handful of operations where
summarization of kernel output is very useful (mostly related
to stats: page-pool, qstat).
Create a command (inspired by bpftool, I think it stood the test
of time reasonably well) to be able to plug the subcommands into.
Link: https://lore.kernel.org/1754895902-8790-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251107162227.980672-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reduce the display dependency on struct drm_i915_private and i915_drv.h
by converting the rom interface to struct drm_device.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251110112048.2366725-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
xfs_qm_vop_dqalloc only needs the (exclusive) ilock for attaching dquots
to the inode if not done so yet. All the other locks don't touch the inode
and don't need the ilock - the i_rwsem / iolock protects against changes
to the IDs while we are in a method, and the ilock would not help because
dropping it for the dqget calls would be racy anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
These are the low-level functions that needs them, so localize the
(trivial) calculation of the radix tree root there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Drop two redundant lock roundtrips by not requiring q_lock to be held on
entry and return.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Drop two redundant lock roundtrips by not requiring q_lock to be held on
entry and return.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Instead of having both callers do it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This avoids a pointless roundtrip because ilock needs to be taken first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is no good reason to take q_qlock in xchk_dquot_iter, which just
provides a reference to the dquot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
q_type can't change for an existing dquot, so there is no need for
the locking here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is no reason to lock the dquot in xfs_qm_dqget, which just acquires
a reference. Move the locking to the callers, or remove it in cases where
the caller instantly unlocks the dquot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_qm_dqattach_one is a thin wrapper around xfs_qm_dqget_inode. Move
the extra asserts into xfs_qm_dqget_inode, drop the unneeded q_qlock
roundtrip and merge the two functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The caller already checks that, so replace the handling of this case with
an assert that it does not happen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Move taking q_qlock from the cache lookup / insert helpers into the
main functions and do it just before returning to the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
With the new lockref-based dquot reference counting, there is no need to
hold q_qlock for dropping the reference. Make xfs_qm_dqrele the main
function to drop dquot references without taking q_qlock and convert all
callers of xfs_qm_dqput to unlock q_qlock and call xfs_qm_dqrele instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The xfs_dquot structure currently uses the anti-pattern of using the
in-object lock that protects the content to also serialize reference
count updates for the structure, leading to a cumbersome free path.
This is partially papered over by the fact that we never free the dquot
directly but always through the LRU. Switch to use a lockref instead and
move the reference counter manipulations out of q_qlock.
To make this work, xfs_qm_flush_one and xfs_qm_flush_one are converted to
acquire a dquot reference while flushing to integrate with the lockref
"get if not dead" scheme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There's really no point in wrapping the basic mutex operations. Remove
the wrapper to ease lock analysis annotations and make the code a litte
easier to read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Return other errors to the caller instead. Note that there really
shouldn't be any other errors because the entry is preallocated, but
if there were, we'd better return them instead of retrying forever.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
qi_dquots counts all quotas in the file system, which can be up to
3 * UINT_MAX and overflow a 32-bit counter, but can't be negative.
Make qi_dquots a uint64_t, and saturate the value to UINT_MAX for
userspace reporting.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_qm_quotacheck_dqadjust acquired the dquot through xfs_qm_dqget,
which means it owns a reference and holds q_qlock. Both need to
be dropped on an error exit.
Cc: <stable@vger.kernel.org> # v6.13
Fixes: ca378189fd ("xfs: convert quotacheck to attach dquot buffers")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Some Marvell AP firmware used with mwl8k misbehaves when beacon frames
do not contain a WLAN_EID_DS_PARAMS element with the current channel.
It was reported on OpenWrt Github issues [0].
When hostapd/mac80211 omits DSSS Parameter Set from the beacon (which is
valid on some bands), the firmware stops transmitting sane frames and RX
status starts reporting bogus channel information. This makes AP mode
unusable.
Newer Marvell drivers (mwlwifi [1]) hard-code DSSS Parameter Set into
AP beacons for all chips, which suggests this is a firmware requirement
rather than a mwl8k-specific quirk.
Mirror that behaviour in mwl8k: when setting the beacon, check if
WLAN_EID_DS_PARAMS is present, and if not, extend the beacon and inject
a DSSS Parameter Set element, using the current channel from
hw->conf.chandef.chan.
Tested on Linksys EA4500 (88W8366).
[0] https://github.com/openwrt/openwrt/issues/19088
[1] db97edf20f/hif/fwcmd.c (L675)
Fixes: b64fe619e3 ("mwl8k: basic AP interface support")
Tested-by: Antony Kolitsos <zeusomighty@hotmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20251111100733.2825970-3-paweldembicki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Plus a rtgroup wrapper and use that to avoid overflows when converting
zone/rtg counts to block counts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In one of the error paths, the memory allocated for skb_rx is not freed.
Fix that by freeing it before returning.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251110175316.106591-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Verify that only one of the permitted change flags is set when changing
the link of a monitor interface. Before the WARN_ON_ONCE would accept
anything if mu_mimo_owner was set.
Also, split out the mu_mimo_owner flag and enable it for all interface
types. The option is set during association when VHT is available and it
is not expected that any configuration of the MU groups is done without
it being set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110141948.6696dba8678d.Icafac3be4724825dd6140e4407bae3a2adb593a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For monitoring, userspace will try to configure the VIF sdata, while the
driver may see the monitor_sdata that is created when only monitor
interfaces are up. This causes the odd situation that it may not be
possible to store the MU-MIMO configuration on monitor_sdata.
Fix this by storing that information on the VIF sdata and updating the
monitor_sdata when available and the interface is up. Also, adjust the
code that adds monitor_sdata so that it will configure MU-MIMO based on
the newly added interface or one of the existing ones.
This should give a mostly consistent behaviour when configuring MU-MIMO
on sniffer interfaces. Should the user configure MU-MIMO on multiple
sniffer interfaces, then mac80211 will simply select one of the
configurations. This behaviour should be good enough and avoids breaking
user expectations in the common scenarios.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110141514.677915f8f6bb.If4e04a57052f9ca763562a67248b06fd80d0c2c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement fallback to LPI mode when SP mode is not permitted
by regulatory constraints for INDOOR_SP connections.
Limit fallback mechanism to client mode.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.8b43201a34ae.I37fc7bb5892eb9d044d619802e8f2095fde6b296@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move duplicated ap_power type handling code to an inline
function in cfg80211.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.959948da1cb5.I893b5168329fb3232f249c182a35c99804112da6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct regulatory request was not fully initialized. While this is not
really a big deal because nl80211_send_reg_change_event doesn't look at
the other fields, it still makes sense to zero all the other fields as
Coverity suggests.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140230.f8d4fcb1328b.I87170b1caef04356809838e684c9499f5806e624@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251111094302.95003-1-sakari.ailus@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This should avoid *some* cache misses.
Successful path lookup is guaranteed to load at least ->i_mode,
->i_opflags and ->i_acl. At the same time the common case will avoid
looking at more fields.
struct inode is not guaranteed to have any particular alignment, notably
ext4 has it only aligned to 8 bytes meaning nearby fields might happen
to be on the same or only adjacent cache lines depending on luck (or no
luck).
According to pahole:
umode_t i_mode; /* 0 2 */
short unsigned int i_opflags; /* 2 2 */
kuid_t i_uid; /* 4 4 */
kgid_t i_gid; /* 8 4 */
unsigned int i_flags; /* 12 4 */
struct posix_acl * i_acl; /* 16 8 */
struct posix_acl * i_default_acl; /* 24 8 */
->i_acl is unnecessarily separated by 8 bytes from the other fields.
With struct inode being offset 48 bytes into the cacheline this means an
avoidable miss. Note it will still be there for the 56 byte case.
New layout:
umode_t i_mode; /* 0 2 */
short unsigned int i_opflags; /* 2 2 */
unsigned int i_flags; /* 4 4 */
struct posix_acl * i_acl; /* 8 8 */
struct posix_acl * i_default_acl; /* 16 8 */
kuid_t i_uid; /* 24 4 */
kgid_t i_gid; /* 28 4 */
I verified with pahole there are no size or hole changes.
This is stopgap until someone(tm) sanitizes the layout in the first
place, allocation methods aside.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251109121931.1285366-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
Fixes: 36e2edf6ac ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since Eric proposed an idea about adding indirect call wrappers for
UDP and managed to see a huge improvement[1], the same situation can
also be applied in xsk scenario.
This patch adds an indirect call for xsk and helps current copy mode
improve the performance by around 1% stably which was observed with
IXGBE at 10Gb/sec loaded. If the throughput grows, the positive effect
will be magnified. I applied this patch on top of batch xmit series[2],
and was able to see <5% improvement from our internal application
which is a little bit unstable though.
Use INDIRECT wrappers to keep xsk_destruct_skb static as it used to
be when the mitigation config is off.
Be aware of the freeing path that can be very hot since the frequency
can reach around 2,000,000 times per second with the xdpsock test.
[1]: https://lore.kernel.org/netdev/20251006193103.2684156-2-edumazet@google.com/
[2]: https://lore.kernel.org/all/20251021131209.41491-1-kerneljasonxing@gmail.com/
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251031103328.95468-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.
Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.
Fixes: a4b80242d0 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20240115094330.33014-1-chentao@kylinos.cn
This file was missing the shebang line, so added it.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250722220043.14862-1-unixbhaskar@gmail.com
Certain versions of kexec don't even work without kernel-end being
added to the device-tree. Add it even if crash-kernel is disabled.
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-inescapable-mandrill-8a5ff2@boujee-and-buff
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-4-987ff2046272@posteo.net
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-3-987ff2046272@posteo.net