Commit graph

1,464,522 commits

Author SHA1 Message Date
Russell King (Oracle)
da6e9fd104 net: stmmac: ingenic: use PHY_INTF_SEL_x to select PHY interface
Use the common dwmac definitions for the PHY interface selection field.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpt-0000000Djr1-0wwr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:30:39 -08:00
Russell King (Oracle)
307a575775 net: stmmac: ingenic: simplify jz4775 mac_set_mode()
All paths configure the transmit clock as an input. Move this out of
the switch() statement to simplify the code.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpo-0000000Djqv-0RD4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:30:39 -08:00
Russell King (Oracle)
2dd63c3645 net: stmmac: ingenic: move ingenic_mac_init()
Move ingenic_mac_init() to between variant specific set_mode()
implementations and ingenic_mac_probe(). No code changes.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpi-0000000Djqp-4910@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:30:39 -08:00
Simon Schippers
7ff14c5204 usbnet: Add support for Byte Queue Limits (BQL)
In the current implementation, usbnet uses a fixed tx_qlen of:

USB2: 60 * 1518 bytes = 91.08 KB
USB3: 60 * 5 * 1518 bytes = 454.80 KB

Such large transmit queues can be problematic, especially for cellular
modems. For example, with a typical celluar link speed of 10 Mbit/s, a
fully occupied USB3 transmit queue results in:

454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms

of additional latency.

This patch adds support for Byte Queue Limits (BQL) [1] to dynamically
manage the transmit queue size and reduce latency without sacrificing
throughput.

Testing was performed on various devices using the usbnet driver for
packet transmission:

- DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a)
- DELOCK 61969: USB2 to 1 GbE adapter (asix)
- Quectel RM520: 5G modem (qmi_wwan)
- USB2 Android tethering (cdc_ncm)

No performance degradation was observed for iperf3 TCP or UDP traffic,
while latency for a prioritized ping application was significantly
reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully
utilized by iperf3 UDP traffic, the prioritized ping was improved from
1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet
connection, the prioritized ping was improved from 35 ms to 5 ms.

[1] https://lwn.net/Articles/469652/

Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:28:38 -08:00
Zahari Doychev
41d0c31be2 tools: ynl: call nested attribute free function for indexed arrays
When freeing indexed arrays, the corresponding free function should
be called for each entry of the indexed array. For example, for
for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called
for each entry.

Previously, memory leaks were reported when enabling the ASAN
analyzer.

=================================================================
==874==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 24 byte(s) in 1 object(s) allocated from:
    #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
    #1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
    #2 0x55c98db048af in main  ./linux/tools/net/ynl/samples/tc-filter-add.c:71

Direct leak of 24 byte(s) in 1 object(s) allocated from:
    #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
    #1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
    #2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74

Direct leak of 10 byte(s) in 2 object(s) allocated from:
    #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
    #1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622

SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s).

The following diff illustrates the changes introduced compared to the
previous version of the code.

 void tc_flower_attrs_free(struct tc_flower_attrs *obj)
 {
+	unsigned int i;
+
 	free(obj->indev);
+	for (i = 0; i < obj->_count.act; i++)
+		tc_act_attrs_free(&obj->act[i]);
 	free(obj->act);
 	free(obj->key_eth_dst);
 	free(obj->key_eth_dst_mask);

Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:18:05 -08:00
Breno Leitao
23c52b58cc tg3: Fix num of RX queues being reported by ethtool
Using num_online_cpus() to report number of queues is actually not
correct, as reported by Michael[1].

netif_get_num_default_rss_queues() was used to replace num_online_cpus()
in the past, but tg3 ethtool callbacks didn't get converted. Doing it
now.

Link: https://lore.kernel.org/all/CACKFLim7ruspmqvjr6bNRq5Z_XXVk3vVaLZOons7kMCzsEG23A@mail.gmail.com/#t [1]

Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251107-tg3_counts-v1-1-337fe5c8ccb7@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:32 -08:00
Jakub Kicinski
f5d8ec838b Merge branch 'net-dsa-b53-add-support-for-bcm5389-97-98-and-bcm63xx-arl-formats'
Jonas Gorski says:

====================
net: dsa: b53: add support for BCM5389/97/98 and BCM63XX ARL formats

Currently b53 assumes that all switches apart from BCM5325/5365 use the
same ARL formats, but there are actually multiple formats in use.

Older switches use a format apparently introduced with BCM5387/BCM5389,
while newer chips use a format apparently introduced with BCM5395.

Note that these numbers are not linear, BCM5397/BCM5398 use the older
format.

In addition to that the switches integrated into BCM63XX SoCs use their
own format. While accessing these normal read/write ARL entries are the
same format as BCM5389 one, the search format is different.

So in order to support all these different format, split all code
accessing these entries into chip-family specific functions, and collect
them in appropriate arl ops structs to keep the code cleaner.

Sent as net-next since the ARL accesses have never worked before, and
the extensive refactoring might be too much to warrant a fix.
====================

Link: https://patch.msgid.link/20251107080749.26936-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:10 -08:00
Jonas Gorski
2b3013ac03 net: dsa: b53: add support for bcm63xx ARL entry format
The ARL registers of BCM63XX embedded switches are somewhat unique. The
normal ARL table access registers have the same format as BCM5389, but
the ARL search registers differ:

* SRCH_CTL is at the same offset of BCM5389, but 16 bits wide. It does
  not have more fields, just needs to be accessed by a 16 bit read.
* SRCH_RSLT_MACVID and SRCH_RSLT are aligned to 32 bit, and have shifted
  offsets.
* SRCH_RSLT has a different format than the normal ARL data entry
  register.
* There is only one set of ENTRY_N registers, implying a 1 bin layout.

So add appropriate ops for bcm63xx and let it use it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-9-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:07 -08:00
Jonas Gorski
300f78e8b6 net: dsa: b53: add support for 5389/5397/5398 ARL entry format
BCM5389, BCM5397 and BCM5398 use a different ARL entry format with just
a 16 bit fwdentry register, as well as different search control and data
offsets.

So add appropriate ops for them and switch those chips to use them.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:07 -08:00
Jonas Gorski
a7e73339ad net: dsa: b53: move ARL entry functions into ops struct
Now that the differences in ARL entry formats are neatly contained into
functions per chip family, wrap them into an ops struct and add wrapper
functions to access them.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:07 -08:00
Jonas Gorski
e0c476f325 net: dsa: b53: split reading search entry into their own functions
Split reading search entries into a function for each format.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:07 -08:00
Jonas Gorski
1716be6db0 net: dsa: b53: provide accessors for accessing ARL_SRCH_CTL
In order to more easily support more formats, move accessing
ARL_SRCH_CTL into helper functions to contain the differences.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:07 -08:00
Jonas Gorski
bf6e9d2ae1 net: dsa: b53: move writing ARL entries into their own functions
Move writing ARL entries into individual functions for each format.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:06 -08:00
Jonas Gorski
4a291fe722 net: dsa: b53: move reading ARL entries into their own function
Instead of duplicating the whole code iterating over all bins for
BCM5325, factor out reading and parsing the entry into its own
functions, and name it the modern one after the first chip with that ARL
format, (BCM53)95.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:06 -08:00
Jonas Gorski
a6e4fd38bf net: dsa: b53: b53_arl_read{,25}(): use the entry for comparision
Align the b53_arl_read{,25}() functions by consistently using the
parsed arl entry instead of parsing the raw registers again.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:11:06 -08:00
Stephen Boyd
1f2d68c354 clk: renesas: Updates for v6.19
- Various fixes for the module reset procedure on R-Car Gen4 SoCs,
   - Add ADC and thermal (TSU) clocks on RZ/T2H and RZ/N2H,
   - Add USB clocks and resets on RZ/G3E,
   - Add ISP and display (DSI, LCDC) clocks and resets on RZ/V2H and RZ/V2N,
   - Add thermal (TSU) and RTC clocks and resets on RZ/V2H,
   - Add reset support on RZ/T2H and RZ/N2H,
   - Fix the module stop disable procedure on RZ/T2H and RZ/N2H,
   - Add camera (CRU) clocks and resets on RZ/V2N,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaQSODgAKCRCKwlD9ZEnx
 cADZAP4xm+4mGciCjAkvNotnZiE6UvJrDJGLuRPEMxxSP/IZQgD+Nks2rsHwnVQQ
 VMySY0DrTG0aopWDAqaXfKXK4l22Xwk=
 =GNXF
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmkSjCUUHHN3Ym95ZEBj
 aHJvbWl1bS5vcmcACgkQrQKIl8bklSXbfxAAmH/TRPw/VG1L6l3d7927XCUESCh7
 tHXG4fHa0SF4eTxZBaNWHWRmOBkjBgOwdwyngyPS4rDQtFH0enUpPbfPYOmYYmPe
 5XzewfvnfOqSw3Zo23rDF/6OijZRCnoFlwXDdi1OXYTRNaYSyYcXsnjXpjyBoF98
 0N7v+wpWo2NkFZ9EMQ6rpf2VE1/TCy87/hHMMx29uPQvgpjE3clPYN6OMaoaOZMc
 dyJx8otwIbNTeLms/oj0oLSgplJlvQlm8CZ4lLkkUQsEeV/UJmqNACnNVUC5VCiK
 chflc6OQMozC16vaWxs0dFYDvk0IwRmJCy6pY2rnCHqXr0SFgOyPGAjNZK3Uwk1e
 UbV79V0eJ5c8C7azMcFQ/pF8mvagArSHMZ47jf3oFzRF/E+kLqXzY34H00GxZskY
 kWfD6UwU69fjfZYXLm4qbbQbhSih4saRutvwBBKwn0OP0MaAHFcIMx6WvgN6qltq
 m2Sg2VwfNpCIe6QOlPMMTOjPt0lBHbO1dRG32hIg7s60imRzp/RjlWVX/XgOgnvr
 7W7SZhHERqxEfT/i0e8ED8Rtix9AOy08bn3Foie3mCwF1Qz3aLECTkj9w+iucyWw
 yHzRMu8kpcEfQoMkpd+ILNfjEWd5HBTuBH6nlV3lyTWIkUhtadGmb0kgt4f1ECsL
 r2Uw0y1NcAsdfzI=
 =1gJz
 -----END PGP SIGNATURE-----

Merge tag 'renesas-clk-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Various fixes for the module reset procedure on R-Car Gen4 SoCs
 - Add ADC and thermal (TSU) clocks on RZ/T2H and RZ/N2H
 - Add USB clocks and resets on RZ/G3E
 - Add ISP and display (DSI, LCDC) clocks and resets on RZ/V2H and RZ/V2N
 - Add thermal (TSU) and RTC clocks and resets on RZ/V2H
 - Add reset support on RZ/T2H and RZ/N2H
 - Fix the module stop disable procedure on RZ/T2H and RZ/N2H
 - Add camera (CRU) clocks and resets on RZ/V2N

* tag 'renesas-clk-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (21 commits)
  clk: renesas: r9a09g056: Add clock and reset entries for ISP
  clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
  clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
  clk: renesas: r9a09g077: Add TSU module clock
  clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
  clk: renesas: rzv2h: Add support for DSI clocks
  clk: renesas: rzv2h: Use GENMASK for PLL fields
  clk: renesas: rzv2h: Add instance field to struct pll
  clk: renesas: r9a09g057: Add clock and reset entries for RTC
  clk: renesas: cpg-mssr: Spelling s/offets/offsets/
  clk: renesas: r9a09g057: Add clock and reset entries for TSU
  clk: renesas: cpg-mssr: Add read-back and delay handling for RZ/T2H MSTP
  clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
  clk: renesas: r9a09g057: Add clock and reset entries for ISP
  clk: renesas: r9a09g047: Add clock and reset entries for USB2
  clk: renesas: Use IS_ERR() for pointers that cannot be NULL
  dt-bindings: clock: renesas,r9a09g047-cpg: Add USB2 PHY core clocks
  clk: renesas: cpg-lib: Remove unneeded semicolon
  clk: renesas: r9a09g077: Add ADC module clocks
  clk: renesas: cpg-mssr: Read back reset registers to assure values latched
  ...
2025-11-10 17:06:20 -08:00
Ma Ke
f18e71cd6c EDAC/ie31200: Fix error handling in ie31200_register_mci
ie31200_register_mci() calls device_initialize() for priv->dev
unconditionally. However, in the error path, put_device() is not
called, leading to an imbalance. Similarly, in the unload path,
put_device() is missing.

Although edac_mc_free() eventually frees the memory, it does not
release the device initialized by device_initialize(). For code
readability and proper pairing of device_initialize()/put_device(),
add put_device() calls in both error and unload paths.

Found by code review.

Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20251106084735.35017-1-make24@iscas.ac.cn
2025-11-10 17:06:10 -08:00
Jonas Gorski
762e7e174d net: dsa: tag_brcm: do not mark link local traffic as offloaded
Broadcom switches locally terminate link local traffic and do not
forward it, so we should not mark it as offloaded.

In some situations we still want/need to flood this traffic, e.g. if STP
is disabled, or it is explicitly enabled via the group_fwd_mask. But if
the skb is marked as offloaded, the kernel will assume this was already
done in hardware, and the packets never reach other bridge ports.

So ensure that link local traffic is never marked as offloaded, so that
the kernel can forward/flood these packets in software if needed.

Since the local termination in not configurable, check the destination
MAC, and never mark packets as offloaded if it is a link local ether
address.

While modern switches set the tag reason code to BRCM_EG_RC_PROT_TERM
for trapped link local traffic, they also set it for link local traffic
that is flooded (01:80:c2:00:00:10 to 01:80:c2:00:00:2f), so we cannot
use it and need to look at the destination address for them as well.

Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Fixes: 0e62f543be ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251109134635.243951-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 17:04:19 -08:00
Krzysztof Kozlowski
79d022dcad
clk: sprd: sc9860: Simplify with of_device_get_match_data()
Driver's probe function matches against driver's of_device_id table,
where each entry has non-NULL match data, so of_match_node() can be
simplified with of_device_get_match_data().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[sboyd@kernel.org: Use device_get_match_data() instead, drop
printk noise]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-10 17:02:12 -08:00
Steven Rostedt
dd4adb986a selftests/tracing: Run sample events to clear page cache events
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".

But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.

The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.

Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.

Cc: stable@vger.kernel.org
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-11-10 18:00:07 -07:00
Victor Nogueira
60260ad935 selftests/tc-testing: Create tests trying to add children to clsact/ingress qdiscs
In response to Wang's bug report [1], add the following test cases:

- Try and fail to add an fq child to an ingress qdisc
- Try and fail to add an fq child to a clsact qdisc

[1] https://lore.kernel.org/netdev/20251105022213.1981982-1-wangliang74@huawei.com/

Reviewed-by: Pedro Tammela <pctammela@mojatatu.ai>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Link: https://patch.msgid.link/20251106205621.3307639-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:57:56 -08:00
Victor Nogueira
e781122d76 net/sched: Abort __tc_modify_qdisc if parent is a clsact/ingress qdisc
Wang reported an illegal configuration [1] where the user attempts to add a
child qdisc to the ingress qdisc as follows:

tc qdisc add dev eth0 handle ffff:0 ingress
tc qdisc add dev eth0 handle ffe0:0 parent ffff:a fq

To solve this, we reject any configuration attempt to add a child qdisc to
ingress or clsact.

[1] https://lore.kernel.org/netdev/20251105022213.1981982-1-wangliang74@huawei.com/

Fixes: 5e50da01d0 ("[NET_SCHED]: Fix endless loops (part 2): "simple" qdiscs")
Reported-by: Wang Liang <wangliang74@huawei.com>
Closes: https://lore.kernel.org/netdev/20251105022213.1981982-1-wangliang74@huawei.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.ai>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Link: https://patch.msgid.link/20251106205621.3307639-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:57:56 -08:00
Stephen Boyd
5c534939dd SoCFPGA Clock updates for v6.19
- Add the Agilex5 clock driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmj6EuAACgkQGZQEC4Gj
 KPSfNg//RGwNIkblo7AZNaTw1MxFNDYj/HY1P6sUfOrkWuE+gSCUR/dnoZVDcczu
 eQumUfy/rj0QOKEHdNph1YIyaMHQSbNiadE0w8iNEI3Kg2Qz4SxjPi2eG26VO9NT
 RYoBnF+qVGzE2kx2kiX3KtCChzcJU5TmA2YU9/02VweN5+6gO+Rq7WzFS/PK78rk
 iccrn0/+lQX10QQ1xISJdcXEvaESjeiqZzNR8PvaC2wt+tVuUuMi/LdKerR0vJa9
 qhjuO+3qR6dLDOMrbxw1z3WR6PowtJJu8OYKKKC1+gKLMrvraqzOF3KZx/XFVCbc
 +CN0WCP1cJP3ThdJORZP6KVXYXfUir+BeC1Nqc3gTMhCNYz59J6B+3M/sCOJQ9c+
 TlANZ4BB/mTLQbP0ug/qMFAfIw2LWJpVYVnptS9U+suYI1Y/iYzQcMXhCV3MeHJf
 eRDIB9rIk1ERnj7eV3jexByZBM609Y5v8F5/98Ud436xAoCiceIthBUunvxge7RC
 hUPJ83G9t/ZBIcyeCzS5ffobNc7UGcotue1+3N8g/DuhJmVhCKSm/YMiNxeZXMAK
 piLlDYtgVR1+hnIdqTjvRW7VmvPNRYK7P8x4OE0itaGkzXyn9i7ARdtKfTY+Uwn5
 hLFO/gd1CLOYX6nWGf5ynANtVdYF/yS1I+hpuOteg2hrMJHnuQY=
 =TLCO
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmkSiX8UHHN3Ym95ZEBj
 aHJvbWl1bS5vcmcACgkQrQKIl8bklSWHUA//Xslf4UOjTlvy5a2VipmeN2ec7jfi
 JFbUb/b8gDUTgv4iRhydZNbmc0kMjdlSHFVQkyaP5oT5SxXeJZ1BhiPpSM/yJEpj
 rdHxw0tDu8VK5vxmk8SYIawGIucn4DWLFLhK+9OZ0XQtiPWCFEjfCtUJmDhPm7D/
 7+nmkZUL6SumaOLLzDp/Fj5Cht690GuSfHckibgXzwr99paZ8j6eRGgtHEo+1eXB
 SE1hrLmzOyokzGIzImAlaCITE1K8BQO23oxxMNYbTvBZkwpfrfHYw4BI315z9JaB
 vwIEfJp4ShskC+S3ac4eDBSQngKeyvHfu0QNISeWQFz4hv/uHBt48l01a7G5PxcG
 dJ/VMpVIBKRswRNZOzifxgOhVnaRGoR4cPeqxZe91w+Ex5sow3oYxhBPVh04+a2p
 QxJG2cJhPMVyenWCgcpIsJzSlvI4CDwFwbtC8GHCfn7Agyw8X4X5efpvTWTKK84e
 VAD/O/s59beBKGwh7IJtWSg40UzF58fN0IZvfzpexRtzEcut1dSr0msoT/iPHx4O
 nCYHCjbyyBeie36E45zBDH+XwJX+S1wCuKxl35CnIijQrvhtznVjA3VWz34GE0Zg
 QbVd5QiM2NK0s1dOQiRJYSHonkzgUe9KDqXVo1Nl9PrZiYX/xNBt15t/OmwOLynl
 88YqDnoIG53IM90=
 =hTZe
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_clk_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into clk-socfpga

Pull SoCFPGA clk driver updates from Dinh Nguyen:

 - Add the Agilex5 clock driver

* tag 'socfpga_clk_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  clk: socfpga: agilex5: add clock driver for Agilex5
2025-11-10 16:54:59 -08:00
Jakub Kicinski
7fc2bf8d30 bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaRJJFwAKCRAraS+Z+3y5
 E8eZAQDWQ3D76HOlLK8tBAQ8aSpxwsfr7fpheiMSCEI5r7O5sQEA5LuHrBvEb/Cr
 zfU7DxhEQEoVeJMTSia2hEJKWhoNpQ0=
 =n2Ap
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2025-11-10

We've added 19 non-merge commits during the last 3 day(s) which contain
a total of 22 files changed, 1345 insertions(+), 197 deletions(-).

The main changes are:

1) Preserve skb metadata after a TC BPF program has changed the skb,
   from Jakub Sitnicki.
   This allows a TC program at the end of a TC filter chain to still see
   the skb metadata, even if another TC program at the front of the chain
   has changed the skb using BPF helpers.

2) Initial af_smc bpf_struct_ops support to control the smc specific
   syn/synack options, from D. Wythe.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
  bpf/selftests: Add selftest for bpf_smc_hs_ctrl
  net/smc: bpf: Introduce generic hook for handshake flow
  bpf: Export necessary symbols for modules with struct_ops
  selftests/bpf: Cover skb metadata access after bpf_skb_change_proto
  selftests/bpf: Cover skb metadata access after change_head/tail helper
  selftests/bpf: Cover skb metadata access after bpf_skb_adjust_room
  selftests/bpf: Cover skb metadata access after vlan push/pop helper
  selftests/bpf: Expect unclone to preserve skb metadata
  selftests/bpf: Dump skb metadata on verification failure
  selftests/bpf: Verify skb metadata in BPF instead of userspace
  bpf: Make bpf_skb_change_head helper metadata-safe
  bpf: Make bpf_skb_change_proto helper metadata-safe
  bpf: Make bpf_skb_adjust_room metadata-safe
  bpf: Make bpf_skb_vlan_push helper metadata-safe
  bpf: Make bpf_skb_vlan_pop helper metadata-safe
  vlan: Make vlan_remove_tag return nothing
  bpf: Unclone skb head on bpf_dynptr_write to skb metadata
  net: Preserve metadata on pskb_expand_head
  net: Helper to move packet data and metadata after skb_push/pull
====================

Link: https://patch.msgid.link/20251110232427.3929291-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:43:51 -08:00
Niklas Söderlund
38f073a71e net: ravb: Correct bad check of timestamp control flags
When converting the Renesas network drivers to use flags from enum
hwtstamp_rx_filters to control when to timestamp packages instead of a
driver specific schema with bit-wise flags an error was made.

The bit-wise driver specific flags correct logic to set get_ts was:

  q: RAVB_BE + tstamp_rx_ctrl: 0 => 0
  q: RAVB_NC + tstamp_rx_ctrl: 0 => 0
  q: RAVB_BE + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_V2_L2_EVENT => 0
  q: RAVB_NC + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_V2_L2_EVENT => 1
  q: RAVB_BE + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_ALL => 1
  q: RAVB_NC + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_ALL => 1

The converted logic to use enum flags mapped tstamp_rx_ctrl as

  0 to HWTSTAMP_FILTER_NONE
  RAVB_RXTSTAMP_TYPE_V2_L2_EVENT to HWTSTAMP_FILTER_PTP_V2_L2_EVENT
  RAVB_RXTSTAMP_TYPE_ALL to HWTSTAMP_FILTER_ALL

But the logic was incorrectly changed to:

  q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_NONE => 1 (error)
  q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_NONE => 0
  q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_PTP_V2_L2_EVENT => 0
  q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_PTP_V2_L2_EVENT => 1
  q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_ALL => 1
  q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_ALL => 0 (error)

This change restores the converted flag check to the correct logic of
the bit-wise driver specific flags.

Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/linux-renesas-soc/aQ4xSv9629XF-Bt3@horms.kernel.org/
Fixes: 16e2e6cf75 ("net: ravb: Use common defines for time stamping control")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251107200100.3637869-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:26:31 -08:00
Masami Hiramatsu (Google)
7157062bb4 tracing: Report wrong dynamic event command
Report wrong dynamic event type in the command via error_log.
-----
 # echo "z hoge" > /sys/kernel/tracing/dynamic_events
 sh: write error: Invalid argument
 # cat /sys/kernel/tracing/error_log
 [   22.977022] dynevent: error: No matching dynamic event type
   Command: z hoge
            ^
-----

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/176278970056.343441.10528135217342926645.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-11-10 19:26:14 -05:00
Thomas Weißschuh
2db833312d random: drop check for static_key_initialized
Commit e871abcda3 ("random: handle creditable entropy from atomic
process context") added the use of workqueues, which meant testing
whether the workqueue is valid, but it did not remove the existing check
of whether static keys have been initialized. This static key check is
unnecessary because workqueues are initialized long after it. And
semantically it doesn't make much sense either, because it's not really
directly calling a static key function in the condition.

Remove the now unnecessary check.

Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
[Jason: rewrite commit message with different explanation, rebase on
        random.git, and update code comment.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2025-11-11 01:25:31 +01:00
Zhongqiu Han
5b9192c2c0 ptp: ocp: Document sysfs output format for backward compatibility
Add a comment to ptp_ocp_tty_show() explaining that the sysfs output
intentionally does not include a trailing newline. This is required for
backward compatibility with existing userspace software that reads the
sysfs attribute and uses the value directly as a device path.

A previous attempt to add a newline to align with common kernel
conventions broke userspace applications that were opening device paths
like "/dev/ttyS4\n" instead of "/dev/ttyS4", resulting in ENOENT errors.

This comment prevents future attempts to "fix" this behavior, which would
break existing userspace applications.

Link: https://lore.kernel.org/netdev/20251030124519.1828058-1-zhongqiu.han@oss.qualcomm.com/
Link: https://lore.kernel.org/netdev/aef3b850-5f38-4c28-a018-3b0006dc2f08@linux.dev/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251107074533.416048-1-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:23:13 -08:00
Kuniyuki Iwashima
73edb26b06 sctp: Don't inherit do_auto_asconf in sctp_clone_sock().
syzbot reported list_del(&sp->auto_asconf_list) corruption
in sctp_destroy_sock().

The repro calls setsockopt(SCTP_AUTO_ASCONF, 1) to a SCTP
listener, calls accept(), and close()s the child socket.

setsockopt(SCTP_AUTO_ASCONF, 1) sets sp->do_auto_asconf
to 1 and links sp->auto_asconf_list to a per-netns list.

Both fields are placed after sp->pd_lobby in struct sctp_sock,
and sctp_copy_descendant() did not copy the fields before the
cited commit.

Also, sctp_clone_sock() did not set them explicitly.

In addition, sctp_auto_asconf_init() is called from
sctp_sock_migrate(), but it initialises the fields only
conditionally.

The two fields relied on __GFP_ZERO added in sk_alloc(),
but sk_clone() does not use it.

Let's clear newsp->do_auto_asconf in sctp_clone_sock().

[0]:
list_del corruption. prev->next should be ffff8880799e9148, but was ffff8880799e8808. (prev=ffff88803347d9f8)
kernel BUG at lib/list_debug.c:64!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6008 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
RIP: 0010:__list_del_entry_valid_or_report+0x15a/0x190 lib/list_debug.c:62
Code: e8 7b 26 71 fd 43 80 3c 2c 00 74 08 4c 89 ff e8 7c ee 92 fd 49 8b 17 48 c7 c7 80 0a bf 8b 48 89 de 4c 89 f9 e8 07 c6 94 fc 90 <0f> 0b 4c 89 f7 e8 4c 26 71 fd 43 80 3c 2c 00 74 08 4c 89 ff e8 4d
RSP: 0018:ffffc90003067ad8 EFLAGS: 00010246
RAX: 000000000000006d RBX: ffff8880799e9148 RCX: b056988859ee6e00
RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffc90003067807 R09: 1ffff9200060cf00
R10: dffffc0000000000 R11: fffff5200060cf01 R12: 1ffff1100668fb3f
R13: dffffc0000000000 R14: ffff88803347d9f8 R15: ffff88803347d9f8
FS:  00005555823e5500(0000) GS:ffff88812613e000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000480 CR3: 00000000741ce000 CR4: 00000000003526f0
Call Trace:
 <TASK>
 __list_del_entry_valid include/linux/list.h:132 [inline]
 __list_del_entry include/linux/list.h:223 [inline]
 list_del include/linux/list.h:237 [inline]
 sctp_destroy_sock+0xb4/0x370 net/sctp/socket.c:5163
 sk_common_release+0x75/0x310 net/core/sock.c:3961
 sctp_close+0x77e/0x900 net/sctp/socket.c:1550
 inet_release+0x144/0x190 net/ipv4/af_inet.c:437
 __sock_release net/socket.c:662 [inline]
 sock_close+0xc3/0x240 net/socket.c:1455
 __fput+0x44c/0xa70 fs/file_table.c:468
 task_work_run+0x1d4/0x260 kernel/task_work.c:227
 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
 exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43
 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
 syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
 syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
 do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 16942cf4d3 ("sctp: Use sk_clone() in sctp_accept().")
Reported-by: syzbot+ba535cb417f106327741@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/690d2185.a70a0220.22f260.000e.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251106223418.1455510-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:22:09 -08:00
Eric Dumazet
1534ff7775 sctp: prevent possible shift-out-of-bounds in sctp_transport_update_rto
syzbot reported a possible shift-out-of-bounds [1]

Blamed commit added rto_alpha_max and rto_beta_max set to 1000.

It is unclear if some sctp users are setting very large rto_alpha
and/or rto_beta.

In order to prevent user regression, perform the test at run time.

Also add READ_ONCE() annotations as sysctl values can change under us.

[1]

UBSAN: shift-out-of-bounds in net/sctp/transport.c:509:41
shift exponent 64 is too large for 32-bit type 'unsigned int'
CPU: 0 UID: 0 PID: 16704 Comm: syz.2.2320 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
  ubsan_epilogue lib/ubsan.c:233 [inline]
  __ubsan_handle_shift_out_of_bounds+0x27f/0x420 lib/ubsan.c:494
  sctp_transport_update_rto.cold+0x1c/0x34b net/sctp/transport.c:509
  sctp_check_transmitted+0x11c4/0x1c30 net/sctp/outqueue.c:1502
  sctp_outq_sack+0x4ef/0x1b20 net/sctp/outqueue.c:1338
  sctp_cmd_process_sack net/sctp/sm_sideeffect.c:840 [inline]
  sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1372 [inline]

Fixes: b58537a1f5 ("net: sctp: fix permissions for rto_alpha and rto_beta knobs")
Reported-by: syzbot+f8c46c8b2b7f6e076e99@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/690c81ae.050a0220.3d0d33.014e.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251106111054.3288127-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10 16:21:05 -08:00
Christian Marangi
3ffeb17a9a pinctrl: airoha: add support for Airoha AN7583 PINs
Add all the required entry to add suppot for Airoha AN7583 PINs.

Where possible the same function group are used from Airoha EN7581 to
reduce code duplication.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:40:49 +01:00
Christian Marangi
e6e47d31d3 dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
Document Airoha AN7583 Pin Controller based on Airoha EN7581 with some
minor difference on some function group (PCM and LED gpio).

To not bloat the EN7581 schema with massive if condition, use a
dedicated YAML schema for Airoha AN7583.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:40:49 +01:00
Christian Marangi
1552ad5d64 pinctrl: airoha: convert PWM GPIO to macro
The PWM GPIO struct definition follow the same pattern for every GPIO
pin hence it can be converted to a macro.

Create 2 macro one for normal mux and one for ext mux and convert all
the entry to these new macro to reduce code size.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:40:49 +01:00
Christian Marangi
579839c954 pinctrl: airoha: convert PHY LED GPIO to macro
PHY LED GPIO pinctrl struct definition is very similar across the
different 4 PHY and 2 LED and it can be generelized to a macro.

To reduce code size, convert them to a common macro.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:40:49 +01:00
Christian Marangi
4043b0c45f pinctrl: airoha: generalize pins/group/function/confs handling
In preparation for support of Airoha AN7583, generalize
pins/group/function/confs handling and move them in match_data.
Inner function will base the values on the pinctrl priv struct instead of
relying on hardcoded struct.

This permits to use different PIN data while keeping the same logic.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:40:49 +01:00
Linus Torvalds
4427259cc7 RISC-V updates for v6.18-rc6
RISC-V updates for v6.18-rc6, including:
 
 - A fix for a commit in v6.18-rc5 that broke the build on clang
   versions earlier than 19 and binutils versions earlier than 2.38.
   (This exposed that we're not properly testing earlier toolchain
   versions in our linux-next builds and PR submissions.  This was
   fixed for this PR, and is being addressed more generally for -next
   builds.)
 
 - A fix to remove some redundant Makefile code
 
 - A fix to avoid building Canaan Kendryte K210-specific code on targets
   that don't build for the K210
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmkSSpgACgkQx4+xDQu9
 Kks+5hAAihBSkElEK6R7iLUfSoTekXXmHTkfPScFxUjaWjcUG6YAI4F3npRiTJHk
 aVHYDTUljuf+mOrOx5uHi5cMEI5adO6OYJ4bcFPuK0BGvm3XgkVJMxbqISl0uyci
 CTMxG6O4lXseQFz2JmjHUAOsNmzaFgvU0LwOWd3hHmprsujX2y+a98kKIsiGGIIt
 LTgHMzDOB8lPQMpPSYO31mi8og1E7zwtKTqD+gE/9LwJ+rY6nQpH476WmTmyvxYa
 IIvbWj7Q/ctNfDDyhRAJjzUqm+DlqwG+IXw9ttGUCf0RDhLUj56tg9GIR/p123ic
 fx60s3AFC9k8jZtBIaX1ecFw3HsK6SgHJZgI5EM2IrZI8lJmI7G68gOlXJTPl2fG
 aFHpGXc90EtNmmeQCTuwxHrQGY/CCWjcLp3AfLDmKsxkaPMq0ySLuG50AvJde+Ir
 wn/KlDdHe4AZnFpLaM5/pIHsdPt3Qa5uwzskPBhNw1yxLbGcw2WOp3n9gnr2/bnB
 GqRGoSJLJbRfM6jixW9QyzOejq0Z0QbdkacQgf7uLfDQ11la2ckjz2WFn6odRZGa
 FfkAQ3cuY/x81/9IONq/CNAi66euOnrDdp8YwcpcWqXRRbxbDVsVi7rq/cT/Bl/u
 kMv4zqqCHJvd/7rpaBnt3gey7PtmVOxwXQVf/J82RXePHJwaPJo=
 =nEvc
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:

 - fix broken clang build on versions earlier than 19 and binutils
   versions earlier than 2.38.

   (This exposed that we're not properly testing earlier toolchain
   versions in our linux-next builds and PR submissions. This was fixed
   for this PR, and is being addressed more generally for -next builds.)

 - remove some redundant Makefile code

 - avoid building Canaan Kendryte K210-specific code on targets that
   don't build for the K210

* tag 'riscv-for-linus-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix CONFIG_AS_HAS_INSN for new .insn usage
  riscv: Remove redundant judgment for the default build target
  riscv: Build loader.bin exclusively for Canaan K210
2025-11-10 15:35:45 -08:00
Frank Wunderlich
9322da935c dt-bindings: pinctrl: mt7988: allow gpio-hogs
Allow gpio-hogs in pinctrl node for switching pcie on Bananapi R4 Pro.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogiocchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-11 00:01:14 +01:00
Gatien Chevallier
7959deaabe pinctrl: stm32: handle semaphore acquisition when handling pinctrl/pinmux
When a GPIO RIF configuration is in semaphore mode, and the semaphore
hasn't been taken before configuring the GPIO, the write operations
silently fail.

To avoid a silent fail when applying a pinctrl, if the pins that are
being configured are in semaphore mode, take the semaphore. Note that
there is no proper release of the RIF semaphore yet for pinctrl.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-10 23:59:00 +01:00
Ye Zhang
dbd2317d7b pinctrl: rockchip: Add rk3506 pinctrl support
Add support for the 5 rk3506 GPIO banks.

Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-10 23:24:06 +01:00
Ye Zhang
1306495033 dt-bindings: pinctrl: Add rk3506 pinctrl support
Add the compatible string for the rk3506 SoC.

Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-11-10 23:23:59 +01:00
Pavel Begunkov
6a77267d97 io_uring/query: return number of available queries
It's useful to know which query opcodes are available. Extend the
structure and return that. It's a trivial change, and even though it can
be painlessly extended later, it'd still require adding a v2 of the
structure.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-10 14:59:35 -07:00
Jens Axboe
d3c9c213c0 io_uring/rw: ensure allocated iovec gets cleared for early failure
A previous commit reused the recyling infrastructure for early cleanup,
but this is not enough for the case where our internal caches have
overflowed. If this happens, then the allocated iovec can get leaked if
the request is also aborted early.

Reinstate the previous forced free of the iovec for that situation.

Cc: stable@vger.kernel.org
Reported-by: syzbot+3c93637d7648c24e1fd0@syzkaller.appspotmail.com
Tested-by: syzbot+3c93637d7648c24e1fd0@syzkaller.appspotmail.com
Fixes: 9ac273ae3d ("io_uring/rw: use io_rw_recycle() from cleanup path")
Link: https://lore.kernel.org/io-uring/69122a59.a70a0220.22f260.00fd.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-10 14:59:08 -07:00
Dai Ngo
b623390045 NFS: Fix LTP test failures when timestamps are delegated
The utimes01 and utime06 tests fail when delegated timestamps are
enabled, specifically in subtests that modify the atime and mtime
fields using the 'nobody' user ID.

The problem can be reproduced as follow:

# echo "/media *(rw,no_root_squash,sync)" >> /etc/exports
# export -ra
# mount -o rw,nfsvers=4.2 127.0.0.1:/media /tmpdir
# cd /opt/ltp
# ./runltp -d /tmpdir -s utimes01
# ./runltp -d /tmpdir -s utime06

This issue occurs because nfs_setattr does not verify the inode's
UID against the caller's fsuid when delegated timestamps are
permitted for the inode.

This patch adds the UID check and if it does not match then the
request is sent to the server for permission checking.

Fixes: e12912d941 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-11-10 16:55:12 -05:00
Bagas Sanjaya
be4cd2a13a accel/qaic: Format DBC states table in sysfs ABI documentation
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:

Documentation/ABI/stable/sysfs-driver-qaic:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]

These are caused by DMA Bridge channel (DBC) states list in sysfs ABI
docs. Format it as a table to fix them.

Fixes: f286066ed9 ("accel/qaic: Add DMA Bridge Channel(DBC) sysfs and uevents")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110135038.29e96051@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-4-bagasdotme@gmail.com
2025-11-10 14:53:43 -07:00
Bagas Sanjaya
6d61e37833 accel/qaic: Separate DBC_STATE_* definition list
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:

Documentation/accel/qaic/aic100.rst:502: ERROR: Unexpected indentation. [docutils]
Documentation/accel/qaic/aic100.rst:504: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]

Fix these by separating DBC_STATE_* definition list from preceding
paragraph.

Fixes: 9675093ace ("accel/qaic: Implement basic SSR handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110132401.200d88bd@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-3-bagasdotme@gmail.com
2025-11-10 14:50:06 -07:00
Luiz Augusto von Dentz
41bf23338a Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections
Contrary to what was stated on d36349ea73 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.

If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.

Fixes: d36349ea73 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-11-10 16:09:00 -05:00
Pauli Virtanen
15f32cabf4 Bluetooth: 6lowpan: add missing l2cap_chan_lock()
l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise
l2cap_le_sig_cmd() etc. may run concurrently.

Add missing locks around l2cap_chan_close().

Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-11-10 16:08:41 -05:00
Pauli Virtanen
98454bc812 Bluetooth: 6lowpan: Don't hold spin lock over sleeping functions
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock.  Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.

Fix by taking refcounts of peer->chan instead.  Clean up the code and
old comments a bit.

Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.

Also take l2cap_chan_lock() which is required for l2cap_chan_close().

Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------

Fixes: 9030582963 ("Bluetooth: 6lowpan: Converting rwlocks to use RCU")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-11-10 16:08:21 -05:00
Pauli Virtanen
e060088db0 Bluetooth: L2CAP: export l2cap_chan_hold for modules
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.

l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c

Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-11-10 16:08:00 -05:00
Pauli Virtanen
b454505bf5 Bluetooth: 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter.  This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.

Fix address type passed to hci_conn_hash_lookup_le().

Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.

Fixes: f5ad4ffceb ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-11-10 16:07:41 -05:00