Add helper functions for handling Universal Message Passing (UMP)
buffers on SDCA devices. These are generic mechanisms to pass blocks of
binary data between the host and the device, in both directions. They
are used for things like passing HID descriptors and the File Download
process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo property to get the timeout for a Function Reset.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo properties for XU Entities.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the future some IRQs (mostly the UMPs used during File
DownLoad) will need to run after the device has enumerated on the
bus but before the soundcard is actually constructed. As such
refactor more of the IRQ handling to use raw device and regmap
pointers, rather than accessing things through the component.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to locate the sdca_interrupt structure for a given
SDCA IRQ, this makes the code a little more readable and will facilitate
some additions in the future.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is a flag to indicate if an IRQ has been requested by
something outside the SDCA core, such that the core can skip requesting
that IRQ. However, it is simpler and more useful to always store the
allocated IRQ number. This will allow the core to see if the IRQ has
been requested, to perform additional operations on the IRQ, and
request IRQs in multiple phases.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store a copy of the device register map in the structure for the IRQ
handlers. This will allow the individual IRQ handlers access to the
device level register map if required.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA HID code can't assume that the struct device it is passed is
the SoundWire slave device. HID is represented by a Function in SDCA and
will thus likely be implemented by a child driver. Update the code to
explicitly pass in the SoundWire slave device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA interrupt handling is a bit odd, the SDCA IRQ registers are
defined on a device level but the handling of the IRQ is at the
Function level. As such the regmap IRQ's PM runtime operations need to
be on the device itself to ensure those registers are available but an
additional runtime get is required for the Function child when the IRQ
is actually handled. Add the required manual PM runtime gets.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA core processes two different struct device's at various times,
usually it is processing the struct device associated with an individual
SDCA Function driver. However, there are times that it is processing the
struct device associated with the actual SoundWire peripheral, usually
the parent of the Function device.
To ensure this distinction remains clear in the code, rename the variable
when handling the actual SoundWire device to sdev.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 086d08725d ("remoteproc: create vdev subdevice with specific dma
memory pool") added an export for rproc_va_to_pa. However, since its
introduction, this symbol has not been used by any loadable modules. It
remains only referenced within remoteproc_virtio.c, which is always built
together with remoteproc_core.c.
As such, exporting rproc_va_to_pa is unnecessary, so remove the export.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-4-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no user of crc32.h, debugfs.h, of_reserved_mem.h, virtio_ids.h,
so remove from the included headers.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-3-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reordered the header includes in drivers/remoteproc/remoteproc_core.c
to follow alphabetical order to simplify future maintenance.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-2-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The variable ret is immediately assigned the return value of
mutex_lock_interruptible(), making its prior initialization to zero
unnecessary. Remove the redundant assignment
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-1-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
I recently got occasional build failures at -Os or -Oz that would always
involve waitpid(), where the assembler would complain about this:
init.s: Error: .size expression for waitpid.constprop.0 does not evaluate to a constant
And without -fno-asynchronous-unwind-tables it could also spit such
errors:
init.s:836: Error: CFI instruction used without previous .cfi_startproc
init.s:838: Error: .cfi_endproc without corresponding .cfi_startproc
init.s: Error: open CFI at the end of file; missing .cfi_endproc directive
A trimmed down reproducer is as simple as this:
int main(int argc, char **argv)
{
int ret, status;
if (argc == 0)
ret = waitpid(-1, &status, 0);
else
ret = waitpid(-1, &status, 0);
return status;
}
It produces the following asm code on x86_64:
.text
.section .text.nolibc_memmove_memcpy
.weak memmove
.weak memcpy
memmove:
memcpy:
movq %rdx, %rcx
(...)
retq
.section .text.nolibc_memset
.weak memset
memset:
xchgl %eax, %esi
movq %rdx, %rcx
pushq %rdi
rep stosb
popq %rax
retq
.type waitpid.constprop.0.isra.0, @function
waitpid.constprop.0.isra.0:
subq $8, %rsp
(...)
jmp *.L5(,%rax,8)
.section .rodata
.align 8
.align 4
.L5:
.quad .L10
(...)
.quad .L4
.text
.L10:
(...)
.cfi_def_cfa_offset 8
ret
.cfi_endproc
.LFE273:
.size waitpid.constprop.0.isra.0, .-waitpid.constprop.0.isra.0
It's a bit dense, but here's the explanation: the compiler has emitted a
".text" statement because it knows it's working in the .text section.
Then, our hand-written asm code for the mem* functions forced the section
to .text.something without the compiler knowing about it, so it thinks
the code is still being emitted for .text. As such, without any .section
statement, the waitpid.constprop.0.isra.0 label is in fact placed in the
previously created section, here .text.nolibc_memset.
The waitpid() function involves a switch/case statement that can be
turned to a jump table, which is what the compiler does with the .rodata
section, and after that it restores .text, which is no longer the
previous .text.nolibc_memset section. Then the CFI statements cross a
section, so does the .size calculation, which explains the error.
While a first approach consisting in placing an explicit ".text" at the
end of these functions was verified to work, it's still unreliable as
it depends on what the compiler remembers having emitted previously. A
better approach is to replace the ".section" with ".pushsection", and
place a ".popsection" at the end, so that these code blocks are agnostic
to where they're placed relative to other blocks.
Fixes: 553845eebd ("tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`")
Fixes: 12108aa8c1 ("tools/nolibc: x86-64: Use `rep stosb` for `memset()`")
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add MSI doorbell support to reduce latency between PCI host and EP.
Before this change:
ping 169.254.172.137
64 bytes from 169.254.172.137: icmp_seq=1 ttl=64 time=0.575 ms
64 bytes from 169.254.172.137: icmp_seq=2 ttl=64 time=1.80 ms
64 bytes from 169.254.172.137: icmp_seq=3 ttl=64 time=8.19 ms
64 bytes from 169.254.172.137: icmp_seq=4 ttl=64 time=2.00 ms
After this change:
ping 169.254.144.71
64 bytes from 169.254.144.71: icmp_seq=1 ttl=64 time=0.215 ms
64 bytes from 169.254.144.71: icmp_seq=2 ttl=64 time=0.456 ms
64 bytes from 169.254.144.71: icmp_seq=3 ttl=64 time=0.448 ms
Also, change the data type of 'epf_ntb::db' to 'atomic_64' as multiple
doorbell interrupts might trigger at the same time.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: added 'pci_epf_' prefix to doorbell IRQ name, minor code cleanups]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-4-9230298b1910@nxp.com
Remove the 'allow-set-time' property from the rtc node because APPS
is prohibited from setting the hardware RTC time.
Signed-off-by: Tingguo Cheng <tingguo.cheng@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250926-remove-rtc-allow-set-time-v1-1-76895a666939@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6150 and QCS615 are two names for the same die, collectively known as
'talos'. Follow the example of other platforms and rename SM6150 to
talos.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-3-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X1E80100 and several other similar names (X1E78100, X1E001DE) all
belong to the platform now known as 'hamoa'. Follow the example of
'lemans' and rename the x1e80100.dtsi to hamoa.dtsi and
x1e80100-pmics.dtsi to hamoa-pmics.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-2-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 and QCS8275 are two variants of the same die with no
difference visible to the Linux kernel, which are collectively named as
'monaco'. Rather than trying to using the name, which is not always
relevant, follow the example of 'lemans' and rename qcs8300.dtsi to
monaco.dtsi (and qcs8300-pmics.dtsi to monaco-pmics.dtsi).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-1-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the refgen regulator block and use it for the DSI controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250921-refgen-v1-9-9d93e64133ea@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sort the lemans.dtsi, moving USB1 and USB2 PHYs to a proper place,
making the DT file sorted by the address.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-refgen-v1-2-9d93e64133ea@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add pci_epf_assign_bar_space() API to allow setting any MMIO address as
the BAR memory space, such as an MSI message base address.
This API also conforms to the BAR base address and size alignment
restrictions enforced by the PCI spec r6.0, sec 7.5.1.2.1.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed unused epc var, reworded kdoc, comments and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-3-9230298b1910@nxp.com
PCIe ECAM(Enhanced Configuration Access Mechanism) feature requires
maximum of 256MB configuration space.
To enable this feature increase configuration space size to 256MB. If
the config space is increased, the BAR space needs to be truncated as
it resides in the same location. To avoid the bar space truncation move
config space, DBI, ELBI, iATU to upper PCIe region and use lower PCIe
iregion entirely for BAR region.
This depends on the commit: '10ba0854c5 ("PCI: qcom: Disable mirroring
of DBI and iATU register space in BAR region")'
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250828-ecam_v4-v8-1-92a30e0fa02d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Operation State Manager (OSM) L3 interconnect provide node and OPP
tables required to scale DDR and L3 per freq-domain on QCS615 SoC.
As QCS615 and SM8150 SoCs have same OSM hardware, added SM8150
compatible as fallback for QCS615 OSM device node.
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250819-talos-l3-icc-v3-2-04529e85dac7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a helper function to check if a PRM handler/module is present.
This can be used during init time by code that depends on a particular
handler. If the handler is not present, then the code does not need to
be loaded.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: "Mario Limonciello (AMD)" <superm1@kernel.org>
Acked-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Link: https://patch.msgid.link/all/20251017-wip-atl-prm-v2-1-7ab1df4a5fbc@amd.com
Introduce pci_epf_get_required_bar_size() helper to get the required BAR
size and backing memory size. This helper will be used to set a fixed MMIO
address as the backing memory for a BAR.
Since this helper returns both BAR size and the aligned memory size, use
two parameters, 'bar_size' and 'aligned_mem_size' to avoid confusion.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: renamed helper to pci_epf_get_required_bar_size(), reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-2-9230298b1910@nxp.com
Rename the member 'epf_bar::aligned_size' to 'epf_bar::mem_size' to better
reflect its purpose. 'aligned_size' was misleading, as it actually
represents the backing memory size allocated for the BAR rather than the
aligned size.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-1-9230298b1910@nxp.com
If subsequent VF FLR request is triggered when previous VF FLR
sequence is still being processed, we ignore it as not needed.
But in case of the multi-GT platforms, one GT may already finish
its VF FLR processing and will start a new sequence, which includes
new cross-GT synchronization point. However, since other GT may
be still busy with post-sync cleanup steps, this will put on hold
this new FLR sequence, which might never finish due to lack of any
future synchronization checkouts.
Add additional cross-GT FLR synchronization point when each GT
ends processing its own FLR sequence. This should also help to
cover the case when one GT fails FLR processing before reaching
the first synchronization point.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6287
Fixes: 2a8fcf7cc9 ("drm/xe/pf: Synchronize VF FLR between all GTs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251025124906.5264-1-michal.wajdeczko@intel.com
The quirk for Victus 15-fa1xxx wasn't working on Victus 15-fa1031nt due to a different board id. This patch enables the existing quirk for the board id 8BC8.
Tested on HP Victus 15-fa1031nt (MB 8C2D). The LED behaviour works as intended.
Signed-off-by: Eren Demir <eren.demir2479090@gmail.com>
Link: https://patch.msgid.link/20251027110208.6481-1-eren.demir2479090@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The vDSO address is added to the userspace auxiliary vectors even if the
vDSO was not allocated. When accessing the page, userspace processes
will crash.
Enforce that the allocation works.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251013-uml-vdso-cleanup-v1-3-a079c7adcc69@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The clock_gettime() system call takes a pointer to
'struct __kernel_timespec', not 'struct __kernel_old_timespec'.
Right now this is not an issue as the vDSO never works with the
actual struct but only passes it through to the kernel.
Fix the prototype for consistency with the system call.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251013-uml-vdso-cleanup-v1-1-a079c7adcc69@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>