-----BEGIN PGP SIGNATURE-----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=8wrr
-----END PGP SIGNATURE-----
Merge tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
FEC WoL (Wake-on-Lan) functionality depends on using Ethernet PHY in IRQ
mode. However, on phyCORE-i.MX93 SoM, polling mode is used instead for
the FEC Ethernet PHY. Consequently, WoL is non-functional. Thus disable
it by removing "fsl,magic-packet" property. This allows us to save some
power during device suspend as PHY is not kept awake.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'dma-name' is not a valid property and causes the following dt-schema
warning:
dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
Fix it by using 'dma-names' instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 21179eae56 ("arm64: dts: freescale: imx93-phyboard-nash: Add
current sense amplifier") added information about the current sensing
circuitry found on the board. Now, lets provide current sense reading
also via IIO-hwmon subsystem. This way, SoM current can be read directly
via sysfs property more conveniently for the customers. No need for them
to manually apply scaling factor calculations anymore.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TMU has two temperature measurement sites located on the chip. The
probe 0 is located inside of the ANAMIX, while the probe 1 is located near
the ARM core. This has been confirmed by checking with HW design team and
checking RTL code.
So correct the {cpu,soc}-thermal sensor index.
Fixes: 30cdd62dce ("arm64: dts: imx8mp: Add thermal zones support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
PCI devices should have a compatible string based on the vendor and
device IDs. So add this compatible string to NETC Timer.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
m41t00 compatible is not existing. Change it to st,m41t00 to fix below
CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@68: failed to match any schema with compatible: ['m41t00']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set gpio/off to none for linux,default-trigger.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dtb: user-leds (gpio-leds): user-led1:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'gpio' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add power-supply for vxt,vl050-8048nt-c01 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: panel (vxt,vl050-8048nt-c01): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add required power supply for ov5640.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtb: camera@3c (ovti,ov5640): 'AVDD-supply' is a required property
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatible string isl,isl12022 is typo, it should be isil,isl12022.
Fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@6f: failed to match any schema with compatible: ['isl,isl12022']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Compatible string 'gpio-key' is not existed. Correct it to 'gpio-keys'.
Fix below CHECK_DTBS warnings
arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dtb: /gpio-keys: failed to match any schema with compatible: ['gpio-key']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename i2c<n>mux i2c-mux-<n> to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dtb: i2c2mux (i2c-mux-gpio): $nodename:0: 'i2c2mux' does not match '^(i2c-?)?mux'
from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename node name flash to eeprom to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: flash@0 (atmel,at25): $nodename: 'anyOf' conditional failed, one must be fixed:
'flash@0' does not match '^eeprom@[0-9a-f]{1,2}$'
'flash@0' does not match '^fram@[0-9a-f]{1,2}$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename touch to touchscreen.
Rename stmpe_touchscreen to touchscreen.
Rename stmpe_adc to adc.
Fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dtb: touch@48 (ti,tsc2004): 'wakeup-gpios' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove redundant pinctrl-name because no pinctrl-0 existed to fix below
CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dtb: pwm@2084000 (fsl,imx6q-pwm): 'pinctrl-0' is a dependency of 'pinctrl-names'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename ethernet-phy to ethernet-phy@0 to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dtb: ethernet@2188000 (fsl,imx6q-fec): mdio: Unevaluated properties are not allowed ('ethernet-phy' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add interrupt-cells for pmic to fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pmic@58 (dlg,da9063): 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename node name ds1672 to rtc to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ds1672@68 (dallas,ds1672): $nodename:0: 'ds1672@68' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add key- prefix for gpio-keys and rename button_0 to button-0 to fix below
CHECK_DTB warning:
arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dtb: gpio-keys (gpio-keys): 'eeprom-wp', ... do not match any of the regexes: '^(button|...))$', 'pinctrl-[0-9]+
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #address-cells for gsc20 to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: gsc@20 (gw,gsc): '#address-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa91xx module attached to MBa91xxCA board.
TQMa91xx is a SOM series using i.MX91 SOC. The SOM features PMIC, RAM,
e-MMC and some optional peripherals like SPI-NOR, RTC, EEPROM,
gyroscope and secure element.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'eee-broken-1000t' flag disables Energy-Efficient Ethernet (EEE) on 1G
links as a workaround for PTP sync issues on older i.MX6 platforms.
Remove it since the i.MX93 have not such issue.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add i.MX91 11x11 EVK board support.
- Enable ADC1.
- Enable lpuart1 and lpuart5.
- Enable network eqos and fec.
- Enable I2C bus and children nodes under I2C bus.
- Enable USB and related nodes.
- Enable uSDHC1 and uSDHC2.
- Enable Watchdog3.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX 91 family features an Arm Cortex-A55 running at up to 1.4GHz,
support for modern LPDDR4 memory to enable platform longevity, along
with a rich set of peripherals targeting medical, industrial and
consumer IoT market segments.
The mainly difference between i.MX91 and i.MX93 is as follows:
- i.MX91 removed some clocks and modified the names of some clocks.
- i.MX91 only has one A core.
- i.MX91 has different pinmux.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The design of i.MX91 platform is very similar to i.MX93 and only
some small differences.
If the imx91.dtsi include the imx93.dtsi, each add to imx93.dtsi
requires an remove in imx91.dtsi for this unique to i.MX93, e.g. NPU.
The i.MX91 isn't the i.MX93 subset, if the imx93.dtsi include the
imx91.dtsi, the same problem will occur.
Common + delta is better than common - delta, so add imx91_93_common.dtsi
for i.MX91 and i.MX93, then the imx93.dtsi and imx91.dtsi will include the
imx91_93_common.dtsi.
Rename imx93.dtsi to imx91_93_common.dtsi and move i.MX93 specific
part from imx91_93_common.dtsi to imx93.dtsi.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The aliases is board level property rather than soc property, so move
these to each boards.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SolidRun Clearfog CX and Honeycomb have LX2160A PEX3 and PEX5 exposed on
physical connectors.
Vendor U-Boot used to patch status properties such that it went
undiscovered these nodes have their status set disabled.
Set status okay for pcie3 and pcie5 nodes.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SolidRun LX2160A CEX-7 module has interrupts wired for both the rtc and
ethernet phy.
Add description for those interrupts to the rtc and phy nodes.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add description for the SolidRun i.MX8M Plus based System on Module, and
the CuBox-M.
The SoM features:
- 2x 1Gbps Ethernet with PHY
- eMMC
- 1/2/3/8GB DDR
- MIPI-CSI Camera Connector (not described without specific camera)
The CuBox-M is a complete product with enclosure featuring:
- 1x 1Gbps RJ45 Ethernet Port
- 2x USB-3.0 Type A
- HDMI connector
- microSD connector
- microUSB connector for console (using fdtdi chip)
- IR receiver
- RTC with backup battery
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Decoding interrupt-map is tricky, because it consists of five
components. Use known GIC_SPI define in final interrupt specifier
component makes easier to read.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8-ss-hsio.dtsi:71.3-74.28: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8qm-ss-hsio.dtsi:83.3-86.28: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8mq.dtsi:1746.4-1749.43: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8mp.dtsi:2184.4-2187.29: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8mm.dtsi:1355.4-1358.29: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
imx8dxl-ss-hsio.dtsi:45.3-48.27: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
fsl-ls1046a.dtsi:334.5-346.26: Warning (interrupt_map): /soc/scfg@1570000/interrupt-controller@1ac:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
fsl-ls1043a.dtsi:330.5-342.26: Warning (interrupt_map): /soc/scfg@1570000/interrupt-controller@1ac:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
fsl-ls1012a.dtsi:548.4-551.32: Warning (interrupt_map): /soc/pcie@3400000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the can tranceivers to actually use the new phy description instead
of the regulator tweak.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board.
Key interfaces include:
- Gigabit Ethernet
- USB 3.0
- I2S, UART, SPI, I2C, PWM, GPIO
Signed-off-by: Richard Hu <richard.hu@technexion.com>
Signed-off-by: Ray Chang <ray.chang@technexion.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ISP HDR stitching registers are clocked by the pixel clock, which is
gated by the MIPI_CSI2 power domain. Attempting to access those
registers with the clock off locks up the system. Fix this by adding the
pclk clock and the MIPI_CSI2 secondary power domain.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zNV6
-----END PGP SIGNATURE-----
Merge tag 'nf-25-09-10-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westpha says:
====================
netfilter pull request nf-25-09-10
First patch adds a lockdep annotation for a false-positive splat.
Last patch adds formal reviewer tag for Phil Sutter to MAINTAINERS.
Rest of the patches resolve spurious false negative results during set
lookups while another CPU is processing a transaction.
This has been broken at least since v4.18 when an unconditional
synchronize_rcu call was removed from the commit phase of nf_tables.
Quoting from Stefan Hanreichs original report:
It seems like we've found an issue with atomicity when reloading
nftables rulesets. Sometimes there is a small window where rules
containing sets do not seem to apply to incoming traffic, due to the set
apparently being empty for a short amount of time when flushing / adding
elements.
Exanple ruleset:
table ip filter {
set match {
type ipv4_addr
flags interval
elements = { 0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
}
chain pre {
type filter hook prerouting priority filter; policy accept;
ip saddr @match accept
counter comment "must never match"
}
}
Reproducer transaction:
while true:
nft -f -<<EOF
flush set ip filter match
create element ip filter match { \
0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
EOF
done
Then create traffic. to/from e.g. 192.168.2.1 to 192.168.3.10.
Once in a while the counter will increment even though the
'ip saddr @match' rule should have accepted the packet.
See individual patches for details.
Thanks to Stefan Hanreich for an initial description and reproducer for
this bug and to Pablo Neira Ayuso for reviewing earlier iterations of
the patchset.
* tag 'nf-25-09-10-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
====================
Link: https://patch.msgid.link/20250910190308.13356-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjBpO8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnJOOB/9r35uZBD1+ZZVpvoByhil8XY7K42Vv
LrARJ8+kh1Q6mcuB4V/176GBPJ7JabSUTGqvqvYbJBAB5obONhLU5Bkb/7lM2z1G
MOUe0DMiBP+J3K8zqXcEKhqeW0qQO6pqfnv8iIj97Kxwd5JRPJq8pMpCIC/RLzOY
Ot7+fcsE+cSZt9VumnQTx/S1fzGoY1C9VCglSr9B0O6IiTZZBIPNg8EwIGvbm7oh
uofnFRocRZaWQ6OErdRSTLK4hu11DeFUmEAA6YN2ikpAdshUsf3U8HYaz2LIEEuu
zGflFXrMekXqDod1SvhklLPUY/ssC11dUon+4Cgz/yK6I+lFvD/cuLIP
=/YxL
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-10
The 1st patch is by Alex Tran and fixes the Documentation of the
struct bcm_msg_head.
Davide Caratti's patch enabled the VCAN driver as a module for the
Linux self tests.
Tetsuo Handa contributes 3 patches that fix various problems in the
CAN j1939 protocol.
Anssi Hannula's patch fixes a potential use-after-free in the
xilinx_can driver.
Geert Uytterhoeven's patch fixes the rcan_can's suspend to RAM on
R-Car Gen3 using PSCI.
* tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
docs: networking: can: change bcm_msg_head frames member to support flexible array
====================
Link: https://patch.msgid.link/20250910162907.948454-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-09 (igb, i40e)
For igb:
Tianyu Xu removes passing of, no longer needed, NAPI id to avoid NULL
pointer dereference on ethtool loopback testing.
Kohei Enju corrects reporting/testing of link state when interface is
down.
For i40e:
Michal Schmidt corrects value being passed to free_irq().
Jake sets hardware maximum frame size on probe to ensure
expected/consistent state.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix Jumbo Frame support after iPXE boot
i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path
igb: fix link test skipping when interface is admin down
igb: Fix NULL pointer dereference in ethtool loopback test
====================
Link: https://patch.msgid.link/20250909203236.3603960-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP
PIT") renames the config VF_PIT_TIMER to NXP_PIT_TIMER, but it misses
adjusting a reference to VF_PIT_TIMER in arch/arm/mach-imx/Kconfig.
Adjust the config reference to the new name.
Fixes: 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>