nfsd_buffered_readdir() allocates a staging buffer with __get_free_page().
kmalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of __get_free_page() with kmalloc().
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-7-275e36a83f0e@kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Temporary buffers page and page2 allocated by nfs4_replace_transport() and
passed to nfs4_try_replacing_one_location() are never used.
Remove them and the code that allocates and frees memory for these buffers.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-6-275e36a83f0e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
nfs_show_devname() allocates a tmemporary buffer __get_free_page().
kmalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of __get_free_page() with kmalloc().
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-5-275e36a83f0e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
nilfs_ioctl_wrap_copy() allocates a temporary buffer with
get_zeroed_page().
kzalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of get_zeroed_page() with kzalloc().
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-4-275e36a83f0e@kernel.org
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
A few places in ocsfs2 allocate temporary buffers with __get_free_page() or
get_zeroed_page().
kmalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of __get_free_page() and get_zeroed_page() with kmalloc() and
kzalloc() respectively.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-3-275e36a83f0e@kernel.org
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
A few functions in fs/proc/base.c use __get_free_page() to allocate a
temporary buffer.
kmalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of __get_free_page() with kmalloc().
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-2-275e36a83f0e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
dquot_init() allocates a single page for dquot_hash with
__get_free_pages().
kmalloc() is a better API for such use and it also provides better
scalability and more debugging possibilities.
Replace use of __get_free_pages() with kmalloc() and get rid of the order
variable that remained 0 for more than 20 years.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-1-275e36a83f0e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Agatha Isabelle Moreira <code@agatha.dev> says:
Refactor code to use `clear_and_wake_up_bit()` instead of manual calls
to:
clear_bit_unlock();
smp_mb__after_atomic();
wake_up_bit();
The helper function `clear_and_wake_up_bit()` was introduced in
'commit 8236b0ae31 ("bdi: wake up concurrent wb_shutdown()
callers.")' as a generic way of doing the same sequence of operations,
but several pieces of code still remain.
Replace manual calls to the operations by a single call to
`clear_and_wake_up_bit()` to deduplicate code and standardize pathways.
* patches from https://patch.msgid.link/ag4PEP52c8rxrYPc@guidai:
fs: jbd2: use clear_and_wake_up_bit() in journal_end_buffer_io_sync()
fs: buffer: use clear_and_wake_up_bit() in unlock_buffer()
Link: https://patch.msgid.link/ag4PEP52c8rxrYPc@guidai
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
initramfs_test_extract() and friends call unpack_to_rootfs() from a
kunit kthread while do_populate_rootfs() may still be running
asynchronously from rootfs_initcall. unpack_to_rootfs() keeps its
parser state in module-static variables (victim, byte_count, state,
this_header, header_buf, name_buf, ...), so the two writers corrupt
each other.
On arm64 v7.0-rc5+ this oopses early in boot:
Unable to handle kernel paging request at virtual address ffff80018f9f0ffc
pc : do_reset+0x3c/0x98
Call trace:
do_reset
initramfs_test_extract
kunit_try_run_case
Initramfs unpacking failed: junk within compressed archive
do_reset() faults because 'victim' was overwritten by the boot-time
unpacker; the boot unpacker meanwhile logs the bogus "junk within
compressed archive" on the real initrd because the test wrecked its
state machine.
Add a .suite_init callback that calls wait_for_initramfs() so the async
unpack is quiescent before the first case runs. suite_init runs once per
suite rather than before every individual test case.
Fixes: 83c0b27266 ("initramfs_test: kunit tests for initramfs unpacking")
Signed-off-by: Jia He <justin.he@arm.com>
Link: https://patch.msgid.link/20260519093937.1064628-1-justin.he@arm.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Use `clear_and_wake_up_bit()` in `journal_end_buffer_io_sync()`, since
the helper was introduced in 'commit 8236b0ae31 ("bdi: wake up
concurrent wb_shutdown() callers.")' as a generic way of doing the same
sequence of operations:
clear_bit_unlock();
smp_mb__after_atomic();
wake_up_bit();
The helper was first implemented to avoid bugs caused by forgetting to
call `wake_up_bit()` after `clear_bit_unlock()`.
Since `journal_end_buffer_io_sync()` was first introduced by 'commit
470decc613 ("jbd2: initial copy of files from jbd")' and last
modified in this operation by 'commit 4e857c58ef ("arch: Mass
conversion of smp_mb__*()")', years before `clear_and_wake_up_bit()`, it
still uses the open-coded sequence.
Replace the open-coded sequence with the helper to avoid duplicate code
and reduce code paths to maintain.
Suggested-by: shuo chen <1289151713@qq.com>
Link: https://lore.kernel.org/kernelnewbies/agzoqV835-co4kAN@guidai/T/#t
Signed-off-by: Agatha Isabelle Moreira <code@agatha.dev>
Link: https://patch.msgid.link/ag4SrrOl7R2DcLLi@guidai
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Use `clear_and_wake_up_bit()` in `unlock_buffer()`, since the helper was
introduced in 'commit 8236b0ae31 ("bdi: wake up concurrent
wb_shutdown() callers.")' as a generic way of doing the same sequence of
operations:
clear_bit_unlock();
smp_mb__after_atomic();
wake_up_bit();
The helper was implemented to avoid bugs caused by forgetting to call
`wake_up_bit()` after `clear_bit_unlock()`.
Since `unlock_buffer()` predates git and was last modified in
'commit 4e857c58ef ("arch: Mass conversion of smp_mb__*()")', years
before `clear_and_wake_up_bit()`, it still uses the open-coded sequence.
Replace the open-coded sequence with the helper to avoid duplicate code
and reduce code paths to maintain.
Suggested-by: shuo chen <1289151713@qq.com>
Link: https://lore.kernel.org/kernelnewbies/agzoqV835-co4kAN@guidai/T/#t
Signed-off-by: Agatha Isabelle Moreira <code@agatha.dev>
Link: https://patch.msgid.link/ag4SD-mkmn5IbuN7@guidai
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
During trace remote loading, hyp_trace_load() allocates the descriptor
pages but fails to store the allocated size in trace_buffer->desc_size.
As a result, when unloading the trace buffer, hyp_trace_unload() calls
free_pages_exact() with a size of 0 which fails to free the memory.
Fix this by updating the descriptor size in trace_buffer->desc_size.
Fixes: 3aed038aac ("KVM: arm64: Add trace remote for the nVHE/pKVM hyp")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260521124613.911067-4-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When sharing the trace buffer with the hypervisor, if sharing a page
fails, the rollback path in hyp_trace_buffer_share_hyp() misses
unsharing the metadata page (meta_va) which was successfully shared
before entering the page sharing loop.
Additionally, if a failure occurs, the cleanup calls
hyp_trace_buffer_unshare_hyp() with an incorrect CPU index. Since that
CPU's pages were already rolled back locally in the loop, this leads to
duplicate unsharing attempts.
Fix both issues affecting the rollback.
Fixes: 3aed038aac ("KVM: arm64: Add trace remote for the nVHE/pKVM hyp")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260521124613.911067-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
As the hyp_trace_buffer_unshare_hyp() function name suggests we should
unshare all the previously shared pages, otherwise we leak hyp-shared
pages which won't be reusable for hyp memory.
Fix the typo by calling __unshare_page() on the meta-page, ensuring all
previously shared pages are correctly unshared.
Fixes: 3aed038aac ("KVM: arm64: Add trace remote for the nVHE/pKVM hyp")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260521124613.911067-2-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Extend the tegra264_mc_clients table to cover the full set of memory
clients exposed by the SoC. The client name is used for MC fault
reporting. Clients managed by the BPMP bandwidth manager additionally
carry their bpmp_id and type.
Entries in tegra264_mc_clients[] are sorted to match the order of
the override and security register offsets used in previous SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260518124306.2071481-4-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Some MC clients are present in tegra264_mc_clients[] only for
fault-log naming and have no .bpmp_id or .type assigned. Skip
forwarding bandwidth requests to BPMP for such clients in
tegra264_mc_icc_set().
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260518124306.2071481-2-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
simple_mux_control_put() rejects values greater than e->items, but
enum control values are zero based. For the two-entry mux used by this
driver, valid values are 0 and 1, so value 2 must be rejected as well.
Accepting e->items can store an invalid mux state, pass it to the GPIO
setter, and pass it on to the DAPM mux update path where it is used as
an index into the enum text array.
Use the same >= e->items check used by the ASoC enum helpers.
Fixes: 342fbb7578 ("ASoC: add simple-mux")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Extend the test coverage by giving guidelines to verify the CMP bit acts
according to our expectations.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The current locking implementation allows to select a power of two
number of blocks, which is going to be the protected amount, as well as
telling whether this is the data at the top (end of the device) or the
bottom (beginning of the device). This means at most we can cover half
of the device or the entire device, but nothing in between.
The complement feature allows a much finer grain of configuration, by
allowing to invert what is considered locked and unlocked.
Add support for this feature. The only known position for the CMP bit is
bit 6 of the configuration register.
The locking and unlocking logics are kept unchanged if the CMP bit is
unavailable. Otherwise, once the regular logic has been applied, we
check if we already found an optimal configuration. If not, we try with
the CMP bit set. If the coverage is closer to the request, we use it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
As recently raised on the mailing list, it may be useful to propose a
list of steps to go through in order to prove the devices have been
described correctly, especially since all the block protection
information is not stored in any kind of table and is instead filled
manually by developers.
Use the debugfs output to ease the comparison between expectations and
reality.
[rdunlap@infradead.org: fix build warning]
Link: https://lore.kernel.org/linux-mtd/20260526172341.773398-1-rdunlap@infradead.org/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The debounce bit sets a bypass on the debounce rather than enabling it,
as such the current polarity of the debounce is set incorrectly. Invert
the polarity to correct this.
Fixes: d5282a5392 ("pinctrl: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Returning directly if the regmap_update_bits() fails causes a pm runtime
reference to be leaked, let things run to the end of the function
instead.
Fixes: e52c741907 ("pinctrl: cirrus: cs42l43: use new GPIO line value setter callbacks")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Each GPIO bank has two 32-bit MFP registers: MFPL covering pins 0-7
at the bank base offset, and MFPH covering pins 8-15 at base offset+4.
ma35_pinctrl_parse_groups() computed the register address without
accounting for this split, so any pin with an index >= 8 within its
bank was written to the wrong register.
Also fix the pin descriptor table in pinctrl-ma35d1.c: switch from
sequential to 16-per-bank pin numbering, add missing PC8-PC11 pins
and their mux options, and remove the duplicate PN10-PN15 entries.
Fixes: f805e35631 ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The test's set_capability() function needs to set CAP_CHECKPOINT_RESTORE
(bit 40). But libcap's API (cap_set_flag) didn't support cap 40 when the
test was written - it was too new. So the author worked around it by
casting cap_t to an assumed internal layout.
This worked with older libcap versions where cap_t pointed directly to
that layout. Newer libcap internally restructured its cap_t opaque type.
Since 2.43, libcap natively supports CAP_CHECKPOINT_RESTORE, workaround
is no longer needed. The fix directly uses the library interface.
Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
Link: https://patch.msgid.link/20260524163840.34247-2-eva.kurchatova@virtuozzo.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use unsigned int instead of unsigned for nsops parameter,
to match declaration in syscalls.h.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Link: https://patch.msgid.link/20260525004220.19277-1-xieyi@kylinos.cn
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The kselftests for nsfs where moved under filesystem/ with
commit cae73d3bdc ("seltests: move nsfs into filesystems
subfolder"). However, the kselftest TARGETS declaration was not
adjusted.
Since the kselftest Makefile ignores errors unless no target builds,
the invalid target declaration can easily be missed.
Fix this by adjusting the TARGETS accordingly.
Fixes: cae73d3bdc ("seltests: move nsfs into filesystems subfolder")
Signed-off-by: Florian Schmaus <flo@geekplace.eu>
Link: https://patch.msgid.link/20260526-kselftest-nsfs-v1-1-7b042ebe42d6@geekplace.eu
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Add support for the three pin controllers (MAIN, UPHY and AON) found on
Tegra264.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tegra264 contains three pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the two pin controllers (MAIN and AON) found on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tegra238 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Export tegra_pinctrl_probe() to allow SoC-specific Tegra pinctrl drivers
built as modules to use the common probe path.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix missing #include of pmu.h found while cleaning the evsel/evlist
header files. Sort the remaining header files for consistency with the
rest of the code. Doing this exposed a missing forward declaration of
addr_location in print_insn.h, add this and sort the forward
declarations.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_sym_internal() had no filtering for .L* and L0* mapping
symbols while the kallsyms path already filters them via
is_ignored_kernel_symbol().
Add the same check gated by dso__kernel() so that kernel ELF objects
(vmlinux, .ko) have mapping symbols filtered across all architectures,
but userspace ELF objects are unaffected -- '$' is a valid prefix in
languages like Java and Scala.
The existing ARM/AArch64 and RISC-V architecture-specific mapping symbol
checks are preserved; the new is_ignored_kernel_symbol() check adds x86
local symbol (.L*, L0*) filtering and provides unified
cross-architecture coverage for kernel DSOs.
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mapping symbol filtering is scattered across multiple files with
inconsistent checks. The kernel's own is_mapping_symbol() covers x86
local symbols ('.L*' and 'L0*') on top of the '$' prefix used by
ARM/AArch64/RISC-V, but the perf tool only checks '$'.
Extract is_ignored_kernel_symbol() into symbol.h matching the kernel
definition, and convert the kallsyms and ksymbol event paths to use it.
Add ksymbol event name validation and early mapping symbol filtering
before any state mutation.
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
