Like STE/CD, add a wrapper struct around the u64 array to represent the
already FIELD_PREP'd command data. Unlike the STE/CD this is a u64
because the command submission path will have the swap to le64.
This makes the API clearer when a u64 is referring to a formatted
command and makes the following changes easier to follow.
Move the command constants out of the struct and into an enum alongside
the rest of the constants defining the HW format so the entire HW format
is self contained and independent of struct arm_smmu_cmdq_ent.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
This series replaces the entirely custom SoundWire regmap with the generic
regmap-sdw. The reasons for doing this are:
- Avoid code duplication
- Avoid effort of keeping custom implementation up-to-date
- Prepare for supporting BRA
Link: https://patch.msgid.link/20260519135435.479949-1-rf@opensource.cirrus.com
Use the regmap_sdw implementation for SoundWire instead of
re-implementing the low-level bus transactions in cs35l56-sdw.c
The cs35l56 registers are big-endian on I2C and SPI but little-endian
over SoundWire. The firmware files are all big-endian and contain opaque
blobs in big-endian order. So these must be endian-swapped to transfer
over SoundWire. A custom regmap bus implementation is used to do this
endian-swapping.
The original implementation of this custom regmap bus was a complete bus
backend, performing the endian swapping and low-level SoundWire bus
read/write.
This commit changes the custom regmap bus to only perform the endian-swap.
It uses an underlying simple uncached regmap_sdw bus to deal with
transferring the 32-bit registers over the SoundWire bus. Although this
adds a small amount of overhead, from passing through the regmap APIs
twice, it avoids having a local duplicate implementation of what regmap_sdw
already does.
The slow-read handling for OTP registers must access 8-bit SoundWire
registers so it still uses low-level SoundWire bus reads.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260519135435.479949-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the reg_base member of regmap_config for SoundWire so that
the regmap core will apply the 0x8000 offset to addresses, instead
of doing it within our low-level regmap read/write callbacks.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260519135435.479949-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Subtract the value of cs35l56 regmap_config->reg_base from addresses
passed into the mock regmap bus.
Chip register addresses transferred over SoundWire are offset by 0x8000
to move them after the address range reserved in the SoundWire spec.
This commit prepares for changing the cs35l56-sdw driver to use
regmap_config->reg_base to add this offset. When that is done the
addresses passed into the mock regmap_bus will include this offset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260519135435.479949-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BC.cond instructions introduced by FEAT_HBC cannot be executed
out-of-line, like other branch instructions. However, they can be
simulated in the same way as B.cond instructions.
Extend the B.cond decoder mask to match BC.cond instructions as well,
and handle them using the existing B.cond simulation path.
Fixes: 7f86d128e4 ("arm64: add HWCAP for FEAT_HBC (hinted conditional branches)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Link: https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-5-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Users might want to force-enable all possible features even on
machines with a valid device descriptor. Until now the "force"
module param was ignored on such machines. Fix this to make
it easier to test for support of new features.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-4-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The power supply sysfs ABI states that:
Not all hardware is capable of setting this to an arbitrary
percentage. Drivers will round written values to the nearest
supported value. Reading back the value will show the actual
threshold set by the driver.
The driver currently violates this ABI by rejecting a charging
threshold of 0. Fix this by clamping this value to 1.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The EC might initialize the charge threshold with 0 to signal that
said threshold is uninitialized. Detect this and replace said value
with 100 to signal the EC that we want to take control of battery
charging. Also set the threshold to 100 if the EC-provided value
is invalid.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
surfacepro3_button driver.
Fixes: d913a5a12b ("platform/surface: surfacepro3_button: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/23119222.EfDdHjke4D@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-vbtn driver.
Fixes: 26173179fa ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel_sar driver.
Fixes: dcfbd31ef4 ("platform/x86: BIOS SAR driver for Intel M.2 Modem")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/14023870.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-hid driver.
Fixes: ecc83e52b2 ("intel-hid: new hid event driver for hotkeys")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 hp_accel driver.
Fixes: 8ebcb6c94c ("platform/x86: hp_accel: Convert to be a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 adv_swbutton driver.
Fixes: 3d904005f6 ("platform/x86: add support for Advantech software defined button")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-c0xxx (board ID: 8902) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to the omen_v1_legacy_thermal_params quirk.
Testing on board 8902 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Konenko Andrey Viktorovich <admin@aquinas.su>
Link: https://patch.msgid.link/T3DTKbKwQzOgk_0eUG-kMg@aquinas.su
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fwctl core allocates the device-specific RPC input buffer with
fwctl_rpc.in_len and passes that buffer to the driver callback.
pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls
pdsfc_validate_rpc(), which reads fields from that structure before
checking that the input buffer is large enough to contain it. A short
in_len can make pds_fwctl read beyond the allocation.
Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before
parsing any pds-specific fields.
Fixes: 92c66ee829 ("pds_fwctl: add rpc and query support")
Link: https://patch.msgid.link/r/20260517062232.1858747-1-gganji11@naver.com
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Heechan Kang <gganji11@naver.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc4
Here are various unrelated fixes:
- Patch 1: avoid dropping partial packets. A previous version has been
sent a few week ago. A fix for 5.10.
- Patches 2-3: stop ADD_ADDR timer when an ADD_ADDR can never been sent
due to insufficient option space. A fix for v5.10.
- Patch 4: reset rcv_wnd_sent on disconnect, just in case the next
connection falls back to TCP. A fix for 5.17.
- Patch 5: update window_clamp when SO_RCVBUF is set during the
connection. A fix similar to a recent one on TCP side, for v6.6.
- Patch 6: avoid wrong time being displayed in the selftests when using
uutils 0.8.0 which contains a regression with 'date +%3N'. It doesn't
fix an issue in the kernel selftests, but having the fix is helpful
for those using uutils 0.8.0.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-0-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the format specifier +%s%3N with GNU date is honoured, and only
prints 3 digits of the nanoseconds portion of the seconds since epoch,
which corresponds to the milliseconds.
The uutils implementation of date currently does not honour this, and
always prints all 9 digits. This is a known issue [1], but can be worked
around by adapting this test to use nanoseconds instead of microseconds,
and then divide it by 1e6.
This fix is similar to what has been done on systemd side [2], and it is
needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0.
Note that the Fixes tag is there even if this patch doesn't fix an issue
in the kernel selftests, but it is useful for those using uutils 0.8.0.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Link: https://github.com/uutils/coreutils/issues/11658 [1]
Link: https://github.com/systemd/systemd/pull/41627 [2]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add __mptcp_subflow_set_rcvbuf() helper to write the subflow sk_rcvbuf,
but also to call the recently added tcp_set_rcvbuf() helper to update
window_clamp. This is needed because the window clap is updated when
scaling_ratio changes, in tcp_measure_rcv_mss(). Until scaling_ratio
changes, the subflow is stuck with the old window clamp which may be
based on a small initial buffer.
Use this new helper in both mptcp_sol_socket_sync_intval() (setsockopt
path) and sync_socket_options() (new subflow creation path).
Note that this patch depends on commit b025461303 ("tcp: update
window_clamp when SO_RCVBUF is set"): it fixes the issue on TCP side,
but the same fix is needed on MPTCP side as well.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/619
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-5-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the MPTCP socket fallback to TCP before the MP handshake completion,
the IASN remain 0, and the rcv_wnd_sent field is not explicitly
initialized, just incremented over time with the data transfer.
At disconnect time such value is not cleared. If the next connection falls
back to TCP before the MP handshake completion, the data transfer will
keep incrementing the receive window end sequence starting from the last
value used in the previous connection: the announced window will be
unrelated from the actual receiver buffer size and likely too big.
Address the issue zeroing the field at disconnect time.
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-4-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend add_addr_ports_tests with IPv6 signaling cases that exercise
ADD_ADDR tx-space shortage when tcp_timestamps are enabled.
Add one case to verify PM still progresses to later signal endpoints
after the first one is dropped.
This covers both failure accounting and the non-blocking behavior of
the announce list after a tx-space drop on pure ACK.
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-3-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TCP option space is insufficient (e.g., when sending ADD_ADDR with an
IPv6 address and port while tcp_timestamps is enabled), the original code
jumped to out_unlock without clearing the addr_signal flag. This caused
mptcp_pm_add_timer to keep rescheduling indefinitely, not sending ADD_ADDR,
preventing subsequent addresses in the endpoint list from being announced.
Handle this case by clearing the ADD_ADDR signal and skipping the matching
ADD_ADDR retransmission entry. The skip path cancels the matching timer
(with id check) and advances PM state progression, preserving forward
progress to subsequent PM work.
This cancellation is inherently best-effort. A concurrent add_timer
callback may already be running and may acquire pm.lock before the
cancel path updates entry state. In that case, one final ADD_ADDR
transmit attempt can still be executed.
Once the cancel path sets entry->retrans_times to ADD_ADDR_RETRANS_MAX,
the callback-side retrans_times check suppresses further ADD_ADDR
retransmissions.
Note that when an ADD_ADDR is being prepared, a pure-ACK is queued. On
the output side, it means that it is fine to skip non-pure-ACK packets,
when drop_other_suboptions is set: a pure-ACK will be processed soon
after.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-2-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet arrives with map_seq < ack_seq < end_seq, the beginning
of the packet has already been acknowledged but the end contains new
data. Currently the entire packet is dropped as "old data," forcing
the sender to retransmit.
Instead, skip the already-acked bytes by adjusting the skb offset and
enqueue only the new portion. Update bytes_received and ack_seq to
reflect the new data consumed.
A previous attempt at this fix has been sent by Paolo Abeni [1], but had
issues [2]: it also added a zero-window check and changed rcv_wnd_sent
initialization, which caused test regressions. This version addresses
only the partial packet handling without modifying receive window
accounting.
Fixes: ab174ad8ef ("mptcp: move ooo skbs into msk out of order queue.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/c9b426a4e163aa3c4fe8b80c79f1a610f47ae7d8.1763075056.git.pabeni@redhat.com [1]
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/600 [2]
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
[pabeni@redhat.com: update map]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-1-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DURATION_INV_N3 is computed from BIT_ULL(31 + prescalar) divided
by the configured duration, and then written as a 32-bit RAM value.
Durations of 32 samples or less overflow that value, so reject them
and advertise the valid range through the fade duration control.
Validate the ALSA integer control value as a long before storing it in
the driver's u32 duration field. Use a u32 temporary for duration RAM
writes because the largest valid inverse value can still exceed INT_MAX.
Fixes: 36645381b8 ("ASoC: tegra: Add per-stream Mixer Fade controls")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260519094858.1426057-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the custom open function and file_operations with the standard
DEFINE_SHOW_ATTRIBUTE macro to reduce boilerplate code.
This also adds the previously missing .release() callback and fixes the
seq_file leak during close.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: added a note about implicit release callback change spotted by Sashiko]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260508133432.1964491-1-18255117159@163.com
Surface Laptop 7 exposes battery and AC status via Qualcomm PMIC GLINK
qcom_battmgr. Registering the standard SSAM battery and AC client
devices on this platform causes duplicate power-supply devices to
appear.
Drop the SSAM battery and AC nodes from the Surface Laptop 7 registry
group so that only the qcom_battmgr power supplies are instantiated.
Fixes: b27622f131 ("platform/surface: Add OF support")
Signed-off-by: Oliver White <oliverjwhite07@gmail.com>
Link: https://patch.msgid.link/20260409034347.17381-1-oliverjwhite07@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
coresight_add_out_conn() increments nr_outconns before calling
devm_krealloc_array() and again before devm_kmalloc(). If either
allocation fails, the counter is already bumped while the corresponding
array entry is NULL or uninitialized garbage.
coresight_add_in_conn() has the same problem with nr_inconns and
devm_krealloc_array().
In both cases the probe returns -ENOMEM, which causes
coresight_get_platform_data() to call coresight_release_platform_data()
for cleanup. That function iterates up to nr_outconns (or nr_inconns)
entries and dereferences each pointer unconditionally, hitting the NULL
or garbage entry and panicking instead of failing gracefully.
Fix by moving the counter increments to after all allocations succeed,
so the struct is always consistent on any error path.
Fixes: 3d4ff657e4 ("coresight: Dynamically add connections")
Fixes: e3f4e68797 ("coresight: Store in-connections as well as out-connections")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260511-fix-ref-count-issue-v1-1-99d647810d3c@oss.qualcomm.com
Many of SMMU on Qualcomm SoCs come in two flavors using the same front
compatible but a bit different fallback:
1. For application processor, usually without any controllable
clocks,
2. For the Adreno GPU, with some controllable clock(s) and using
additionally qcom,adreno-smmu fallback compatible.
Add missing constraints for Glymur SMMU on Adreno GPU and several other
Qualcomm SMMUs for application processors, to restrict the clocks
property to a specific length.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
BUILD_BUG_ON() is evaluated at compile time. The same three checks
for __HWTSTAMP_TX_CNT, __HWTSTAMP_FILTER_CNT and __HWTSTAMP_FLAG_CNT
are already present earlier in this file (tsconfig_reply_size()).
Repeating them at the start of ethnl_set_tsconfig() does not
strengthen the guarantee; remove the redundant block there and
keep a single occurrence.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Link: https://patch.msgid.link/20260515032550.138572-1-zhaochenguang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tracepoints to the Qualcomm GENI (Generic Interface) SPI driver.
These trace events enable runtime debugging and performance analysis
of SPI operations.
The trace events capture SPI clock configuration, setup parameters,
transfer details, interrupt status.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518-add-tracepoints-for-qcom-geni-spi-v3-2-7928f6810a79@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tracepoint support to the Qualcomm GENI SPI driver to provide
runtime visibility into driver behavior without requiring invasive debug
patches.
The trace events cover clock and setup parameter configuration,
transfer metadata, interrupt status to be making it easier to diagnose
communication issues in the field..
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518-add-tracepoints-for-qcom-geni-spi-v3-1-7928f6810a79@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add coverage of the new hwcaps to the test program, encodings cross checked
against LLVM 22.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The features added by the 2025 dpISA are all straightforward instruction
only features so there is no state to manage, we can just expose hwcaps to
let userspace know they are available.
F16MM is slightly odd in that the feature is FEAT_F16MM but it is discovered
via ID_AA64FPFR0_EL1.F16MM2. We follow the feature name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
PTL with physically disconnected display was observed to have 40s longer
execution time when testing xe_fault_injection@xe_guc_mmio_send_recv.
The issue has not been seen when reverting commit 40a9f77a28 ("Revert
"drm/i915/dp: change aux_ctl reg read to polling read"").
Apparently the configuration suffers from not having AUX enabled when
using interrupts. One probable cause can be xe enabling interrupts too
late: interrupts need memory allocations which currently can't be done
before the display FB takeover is done.
As for now, use polling for AUX in case interrupts are unavailable.
Fixes: 40a9f77a28 ("Revert "drm/i915/dp: change aux_ctl reg read to polling read"")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260416163744.288107-1-michal.grzelak@intel.com
Introduce USB4STREAM protocol and Linux implementation. This allows two
(or more) hosts to transfer data directly over Thunderbolt/USB4 cable
through a character device without need to go through the network stack.
Any application that supports read(2) and write(2) in some form should
be able to use the device without changes. The data is sent out to the
other side over a tunnel inside Thunderbolt/USB4 fabric. The character
device is called /dev/tbstreamX where X is the minor number starting
from 0.
All stream devices need to be configured first. This is done through
ConfigFS interface. There can be multiple streams at the same time (this
depends on number of DMA rings and available HopIDs) and a single stream
supports traffic in both directions. For example there could be an
application that uses one stream as control channel and another one as
bi-directional data channel.
A real use-case for this is to take a backup as a part of recovery
initramfs tooling (no need to setup networking or have ssh or similar
tooling as part of the initramfs). Say we want to backup the disk of
host1 to host2. First Thunderbolt/USB4 cable is connected between the
hosts (there can be devices in the middle too) then the receiving side
configures the stream:
host2 # mkdir /sys/kernel/config/thunderbolt/stream/0-1.0
host2 # mkdir /sys/kernel/config/thunderbolt/stream/0-1.0/backup
host2 # echo -1 > /sys/kernel/config/thunderbolt/stream/0-1.0/backup/in_hopid
host2 # echo -1 > /sys/kernel/config/thunderbolt/stream/0-1.0/backup/out_hopid
We use automatic HopID allocation (writing -1 to HopIDs) for simplicity.
From this point forward the /dev/tbstream0 can be used pretty much as
regular file:
host2 # dd if=/dev/tbstream0 of=/tmp/host1.nvme0n1.backup-$(date +%F) bs=256k
The host that is being backed up then configures the stream accordingly:
host1 # mkdir /sys/kernel/config/thunderbolt/stream/0-503.0
host1 # mkdir /sys/kernel/config/thunderbolt/stream/0-503.0/backup
Here we take advantage of the fact that host2 also announces the active
streams through XDomain properties so the name "backup" gives us the
HopIDs. It is also possible to configure them manually in the same way
we did for host2.
Then it is just a matter of copying the data over:
host1 # dd if=/dev/nvme0n1 of=/dev/tbstream0 bs=256k
Similarly it is possible to transfer parts of the filesystem. For
example copy contents of mydir over to the host2:
host2 # gunzip < /dev/tbstream0 | tar xf -
host1 # tar cf - mydir | gzip > /dev/tbstream0
Other end of the spectrum use-case is "borrowing" laptop (host1) camera
to desktop (host2):
host2 # gst-launch-1.0 filesrc location=/dev/tbstream0 ! jpegdec ! videoconvert ! \
autovideosink
host1 # gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=1920,height=1080 ! \
jpegenc quality=90 ! filesink location=/dev/tbstream0
Once the streams are no longer needed they can be removed:
host1 # cd /sys/kernel/config/thunderbolt/stream/
host1 # rmdir -p 0-503.0/backup
host2 # cd /sys/kernel/config/thunderbolt/stream
host2 # rmdir -p 0-1.0/backup
Co-developed-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This adds ConfigFS support to USB4/Thunderbolt bus. By itself this just
creates the subsystem but it exposes functions that can be used to
register groups under it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This allows the caller to wait for the ring to be empty. We are going to
need this in the upcoming userspace tunneling support.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add to common header a function that returns size of the ring. This can
be used in the drivers instead of rolling own version.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Instead of the core driver programming fixed value for throttling let
the service drivers to specify the interval if they need this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This function can be used outside of thunderbolt networking driver so
move it to the common header.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The XDomain properties can be useful for service drivers, for example to
implement a registry for the services they expose. So far there has been
no need for service drivers to specify these but with the USB4STREAM
driver that we are going to use them.
This adds remote and local side properties that the service drivers have
access to. Remote side is read-only but the local side can be changed by
a service driver. Also provide a mechanism to notify the remote side
that there are changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This allows merging one XDomain property directory into another. We are
going to use this in the subsequent patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add the interconnects property to the common SMMU properties and extend
the sm8750 clock description section to also cover Glymur since it uses
the same single "hlos" vote clock.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
In addition to updating the CPU MPAM version check, the MPAM MSC version
check also need to be updated. mpam_msc_check_aidr() is added to check
the MSC AIDR register, ensuring that both the major and minor version
numbers fall within the supported range of the MPAM architecture version.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[ morse: changed mpam_msc_check_aidr() to accept versions like v1.2 ]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
