Prepare mqprio_dump() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mq_dump_common() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qstats_backlog_sub() and qstats_backlog_add() helpers
and use them instead of open-coding them.
These helpers use WRITE_ONCE() to prevent store-tearing.
Also use WRITE_ONCE() in fq_reset() and qdisc_reset()
when sch->qstats.backlog is cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Helpers to increment or decrement sch->q.qlen, with appropriate
WRITE_ONCE() to prevent store tearing.
Add other WRITE_ONCE() when sch->q.qlen is changed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stats are read locklessly, add READ_ONCE() to prevent load-tearing.
Write side will be handled in separate patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cs35l56_dsp_work() check that the request for runtime-resume was
successful instead of assuming that it can't fail.
We may as well do this using the new PM_RUNTIME_ACQUIRE*() macros and
remove the manual pm_runtime_put_autosuspend() and associated gotos.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260511114239.44970-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The smn_read_register() helper returns negative error codes on failure
or the register value on success. When used with read_poll_timeout(),
the return value is stored in the 'data' variable.
Currently 'data' is declared as u32, which causes negative error codes
to be cast to large positive values. This makes the condition 'data > 0'
incorrectly treat errors as success.
Fix by changing 'data' from u32 to int, matching the pattern used in
psp_mbox_ready() which correctly handles the same helper function.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/agGES8vWrLOrBu28@stanley.mountain/
Fixes: f120cf33d2 ("ASoC: SOF: amd: Use AMD_NODE")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260511153638.724810-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In qed_init_wfq_param(), variable non_requested_count can become zero
when the number of vports with the configured flag set (including the
current vport being configured) equals total num_vports. This happens
when configuring the last unconfigured vport or when re-configuring
an already configured vport.
The function then calculates left_rate_per_vp = total_left_rate /
non_requested_count, which causes division by zero.
Fix this by skipping the division when non_requested_count is zero.
In that case, there is no remaining bandwidth to distribute, so just
record the configuration for the current vport and return success.
Fixes: bcd197c81f ("qed: Add vport WFQ configuration APIs")
Signed-off-by: Evgenii Burenchev <evg28bur@yandex.ru>
Link: https://patch.msgid.link/20260507145520.23106-1-evg28bur@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chunzhi.lin says:
====================
net: phy: motorcomm: add ACPI _DSD property support
This series makes the Motorcomm PHY driver parse firmware properties via
device_property_*() so the same property set can be provided by either
Devicetree or ACPI _DSD.
Patch 1 switches drivers/net/phy/motorcomm.c from of_property_*() to
device_property_*() on &phydev->mdio.dev.
Patch 2 documents Motorcomm yt8xxx PHY ACPI _DSD properties under
Documentation/firmware-guide/acpi/dsd and links the new document from
the ACPI index.
====================
Link: https://patch.msgid.link/20260507040221.3679454-1-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document Motorcomm yt8xxx PHY ACPI _DSD properties consumed by
the motorcomm PHY driver.
Describe property placement, UUID usage, and reference the DT binding
for value constraints and defaults.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Changes in v2:
- Keep dsd/ entries sorted in Documentation/firmware-guide/acpi/index.rst
Link: https://patch.msgid.link/20260507040221.3679454-3-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Motorcomm PHY driver reads optional firmware properties via
of_property_read_*() from phydev->mdio.dev.of_node. This works for
Device Tree based systems, but causes ACPI platforms to ignore the same
properties when they are supplied through _DSD.
As a result, ACPI-described Motorcomm PHY devices fall back to default
settings instead of applying firmware-provided tuning such as
rx/tx internal delay, drive strength, clock output frequency, and
optional boolean controls like auto-sleep-disabled,
keep-pll-enabled, and tx clock inversion.
Switch these lookups to device_property_read_*() so the driver uses the
generic firmware node interface and can consume the same property names
from either Device Tree or ACPI.
This keeps the existing DT behavior unchanged while allowing ACPI
platforms to honor PHY configuration from firmware.
We have completed testing on Sophgo RISC-V architecture server SD3-10.
This server has a 64-core Thead C920 CPU whose DWMAC is connected to
Motorcomm's PHY YT8531. This server supports UEFI boot and it would like
to use the ACPI table.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260507040221.3679454-2-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing REVID_PERPH_SUBTYPE<->name mappings for PMICs that ship
with Glymur.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410-topic-glymur_pmics-v1-1-26bdbb577000@oss.qualcomm.com
[bjorn: Dropped 92,93,96,97,98 as these have already been applied]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: in-kernel: increase limits
Allow switching from 8 to 64 for the maximum number of subflows and
accepted ADD_ADDR, and from 8 to 255 for the number of MPTCP endpoints.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
- Patches 1-2: increase subflows and accepted ADD_ADDR limits.
- Patches 3-4: increase endpoints limit.
- Patches 5-7: validate the new limits: 64 subflows, 255 endpoints.
- Patch 8: selftests: use send()/recv() instead of sendto()/recvfrom().
====================
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-0-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of sendto() and recvfrom() which the NL address that was already
provided before.
Just simpler and easier to read without the to/from variants.
While at it, fix a checkpatch warning by removing multiple assignments.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-8-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These limits have been recently updated, from 8 to:
- 64 for the subflows and accepted add_addr
- 255 for the MPTCP endpoints
These modifications validate the new limits, but are also compatible
with the previous ones, to be able to continue to validate stable kernel
using the last version of the selftests. That's why new variables are
now used instead of hard-coded values.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-7-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The limits have been recently increased, it is required to validate that
having 64 subflows is allowed.
Here, both the client and the server have 8 network interfaces. The
server has 8 endpoints marked as 'signal' to announce all its v4
addresses. The client also has 8 endpoints, but marked as 'subflow' and
'fullmesh' in order to create 8 subflows to each address announced by
the server. This means 63 additional subflows will be created after the
initial one.
If it is not possible to increase the limits to 64, it means an older
kernel version is being used, and the test is skipped.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-6-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, 4 network interfaces are created per subtest in a dedicated
net namespace. Each netns has a dedicated pair of v4 and v6 addresses.
Future tests will need more.
Simply always creating more network interfaces per test will increase
the execution time for all other tests, for no other benefits. So now it
is possible to change this number only when needed, by setting ifaces_nr
when calling 'reset' and 'init_shapers', e.g.
ifaces_nr=8 reset "Subtest title"
ifaces_nr=8 init_shapers
Note that it might also be interesting to decrease the default value to
2 to reduce the setup time, especially when a debug kernel config is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-5-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The endpoints are managed in a list which was limited to 8 entries.
This limit can be too small in some cases: by having the same limit as
the number of subflows, it might not allow creating all expected
subflows when having a mix of v4 and v6 addresses that can all use MPTCP
on v4/v6 only networks.
While increasing the limit above the new subflows one, why not using the
technical limit: 255. Indeed, the endpoint will each have an ID that
will be used on the wire, limited to u8, and the ID 0 is reserved to the
initial subflow.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-4-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_rm_list structure contains an array of IDs of 8 entries: to be
able to send a RM_ADDR with 8 IDs. This limitation was OK so far because
there could maximum 8 endpoints.
But this is going to change in the next commit. To cope with that, if
one of the arrays is full, the iteration stops, the lists are processed,
then the iteration continues where it previously stopped.
Note that if there are many endpoints to remove, and multiple RM_ADDR to
send, it might be more likely that some of these RM_ADDRs are dropped or
lost. This is a known limitation: RM_ADDR are not retransmitted in
MPTCPv1.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-3-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This means switching the maximum from 8 to 64 for the number of subflows
and accepted ADD_ADDR.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
The theoretical limit is 255 -- the ID is written in a u8 on the wire --
but 64 is more than enough. With so many subflows, it will be costly to
iterate over all of them when operations are done in bottom half.
Note that the in-kernel PM will continue to create subflows in reply to
ADD_ADDR with a single batch of maximum 8 subflows. Same when adding new
"subflow" endpoints with the fullmesh flag. Increasing those batch
limits would have a memory impact, and it looks fine not to cover these
cases with larger batches for the moment. If more is needed later, the
position of the last subflow from the list could be remembered, and the
list iteration could continue later.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/434
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-2-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel PM can create subflows in reply to ADD_ADDR by batch of
maximum 8 subflows for the moment. Same when adding new "subflow"
endpoints with the fullmesh flag. This limit is linked to the arrays
used during these steps.
There was no explicit limit to the arrays size (8), because the limit of
extra subflows is the same (8). It seems safer to use an explicit limit,
but also these two sizes are going to be different in the next commit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-1-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On Glymur, all QMP PHYs except the one used by USB SS0 take their
reference clock from the TCSR clock controller. Since these TCSR clocks
already derive from RPMH_CXO_CLK as their sole parent, there is no need
to provide an extra `clkref` clock to the PHY nodes.
Drop the extra RPMh CXO clock inputs and use the TCSR clocks as the PHY
reference clocks instead.
This also fixes the devicetree schema validation, as the bindings do not
allow a separate `clkref` clock.
Fixes: 4eee57dd4d ("arm64: dts: qcom: glymur: Add USB related nodes")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/r/20260410145205.GA554754-robh@kernel.org/
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260414-dts-glymur-drop-rpmh-cxo-clk-from-qmpphys-v1-1-ab12d77c4aec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The two USB Type-C ports on Glymur CRD are dual-role capable.
Do not force their controllers into host mode. Drop the explicit
'dr_mode = "host"' properties so they can use their default OTG mode
instead.
Fixes: c8b6302945 ("arm64: dts: qcom: glymur-crd: Enable USB support")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260415-dts-qcom-glymur-usb-role-switch-fix-v1-2-409e1a257f1f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT.
Fixes: 6b2d11e2d8 ("net/tcp: Add missing lockdep annotations for TCP-AO hlist traversals")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260508120853.4098365-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a -C option that finds the "kernel" subtree of a bootconfig file
and prints it as a flat, space-separated cmdline string by calling the
shared xbc_snprint_cmdline() renderer. An empty or absent kernel.*
subtree produces empty output and exits successfully.
This lets the kernel build embed a bootconfig file as a plain cmdline
string at build time, so embedded bootconfig values can reach
parse_early_param() during architecture setup without parsing the
bootconfig at runtime.
The renderer is intentionally limited to the kernel.* subtree: that is
the only thing the kernel build needs to embed; init.* and other
subtrees keep going through the runtime parser.
Example of this new mode:
# cat /tmp/test.bconf
kernel {
foo = bar
baz = "hello world"
arr = 1, 2
}
init.foo = nope
# ./tools/bootconfig/bootconfig -C /tmp/test.bconf
foo=bar baz="hello world" arr=1 arr=2 %
Link: https://lore.kernel.org/all/20260508-bootconfig_using_tools-v1-2-1132219aa773@debian.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Move xbc_snprint_cmdline() from init/main.c to lib/bootconfig.c so the
function (and its xbc_namebuf scratch buffer) becomes part of the shared
parser library. tools/bootconfig already compiles lib/bootconfig.c
directly, which lets a follow-up patch reuse the same renderer in the
userspace tool to convert a bootconfig file into a flat cmdline string
at build time.
No functional change.
Link: https://lore.kernel.org/all/20260508-bootconfig_using_tools-v1-1-1132219aa773@debian.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
qdisc_offload_dump_helper(), originated from commit 602f3baf22
("net_sch: red: Add offload ability to RED qdisc"), is designed to that
Whether RED is being offloaded is being determined every time dump
action is being called because parent change of this qdisc could
change its offload state but doesn't require any RED function to be
called.
and returning -EOPNOTSUPP (for dump queries) does not mean "I don't have
any statistics", but "I don't offload this qdisc anymore". At least two
existing drivers did it wrong, so it is worth mentioning.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260507214054.2539790-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Allison Henderson <achender@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260505234336.2132721-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'atu' information is already set in the dwc core, if it is specified in
the devicetree. The driver uses its own default, if not set in the
devicetree. This information is hardware-specific and should therefore be
maintained in the devicetree rather than in the source.
To be backward compatible, this field is not mandatory. If 'atu' resource
is not specified in the devicetree, the driver’s default value is used.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-7-0a2b933fe04f@dev.tdt.de
The ATU base address was set in intel_pcie_host_setup(), which is called
via pp->ops->init(). However, dw_pcie_get_resources() runs before this
callback and sets a default atu_base of 0x300000, which then gets
overwritten by the driver's value of 0xC0000.
But this ordering is broken because atu_base must be set before
dw_pcie_get_resources() runs, not after. So move the atu_base assignment
from intel_pcie_host_setup() to intel_pcie_probe() to fix the
initialization order.
The call stack is:
intel_pcie_probe
dw_pcie_host_init
dw_pcie_host_get_resources
dw_pcie_get_resources <- sets atu_base = 0x300000
pp->ops->init
intel_pcie_rc_init
intel_pcie_host_setup <- was overwriting atu_base here
Additionally, add support for parsing the ATU region from the device tree.
If an 'atu' region is present in DT, the DWC core parses it via
dw_pcie_get_resources() and the driver does not set atu_base explicitly.
If 'atu' is absent, the driver falls back to the hardcoded offset (0xC0000
from DBI base) for backwards compatibility, with a warning to the user.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-6-0a2b933fe04f@dev.tdt.de
The pcie-intel-gw driver had no .start_link() callback. Add one so the
driver works again and does not abort with the following error messages
during probing:
intel-gw-pcie d1000000.pcie: host bridge /soc/pcie@d1000000 ranges:
intel-gw-pcie d1000000.pcie: MEM 0x00dc000000..0x00ddffffff -> 0x00dc000000
intel-combo-phy d0c00000.combo-phy: Set combo mode: combophy[1]: mode: PCIe single lane mode
intel-gw-pcie d1000000.pcie: No outbound iATU found
intel-gw-pcie d1000000.pcie: Cannot initialize host
intel-gw-pcie d1000000.pcie: probe with driver intel-gw-pcie failed with error -22
intel-gw-pcie c1100000.pcie: host bridge /soc/pcie@c1100000 ranges:
intel-gw-pcie c1100000.pcie: MEM 0x00ce000000..0x00cfffffff -> 0x00ce000000
intel-combo-phy c0c00000.combo-phy: Set combo mode: combophy[3]: mode: PCIe single lane mode
intel-gw-pcie c1100000.pcie: No outbound iATU found
intel-gw-pcie c1100000.pcie: Cannot initialize host
intel-gw-pcie c1100000.pcie: probe with driver intel-gw-pcie failed with error -22
Fixes: c5097b9869 ("Revert "PCI: dwc: Wait for link up only if link is started"")
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: remove timestamps]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-5-0a2b933fe04f@dev.tdt.de
To improve the readability of the code, move the interrupt enable
instructions to a separate function. That is already done for the disable
interrupt instruction.
In addition, clear and disable all pending interrupts, as is done in
intel_pcie_core_irq_disable(). After that, enable all relevant interrupts
again. The 'PCIE_APP_IRNEN' definition contains all the relevant interrupts
that are of interest.
This change is also done in the MaxLinear SDK [1]. As I unfortunately don’t
have any documentation for this IP core, I suspect that the intention is to
set the IP core for interrupt handling to a specific state. Perhaps the
problem is that the IP core did not reinitialize the interrupt register
properly after a power cycle.
In my view, it can’t do any harm to switch the interrupt off and then on
again to set them to a specific state.
The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.
[1] https://github.com/maxlinear/linux/blob/updk_9.1.90/drivers/pci/controller/dwc/pcie-intel-gw.c#L431
[2] https://www.intc.com/news-events/press-releases/detail/364/intel-to-acquire-lantiq-advancing-the-connected-home
[3] https://investors.maxlinear.com/press-releases/detail/395/maxlinear-to-acquire-intels-home-gateway-platform
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-3-0a2b933fe04f@dev.tdt.de
The C preprocessor define 'PCIE_APP_INTX_OFST' is not used in the sources.
Delete it.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-2-0a2b933fe04f@dev.tdt.de
Chuanhua Lei's email address has been bouncing for months. Remove the entry
and mark the PCI intel-gw driver as orphaned.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-1-0a2b933fe04f@dev.tdt.de
The vmlinux selftest triggers nanosleep and checks that both kprobe
and fentry programs observe the hrtimer enqueue path.
After the hrtimer_start_expires_user() conversion [1], nanosleep
reaches hrtimer_start_range_ns_user() instead of
hrtimer_start_range_ns(). Hard-coding either symbol makes the test
fail either on bpf tree or on linux-next [2].
Update the test to resolve the target symbol at runtime via
libbpf_find_vmlinux_btf_id(). This is a nice example of how to modify
a BPF program to work on both older and newer kernel revision.
[1] https://lore.kernel.org/all/20260408114952.062400833@kernel.org/
[2] https://github.com/kernel-patches/bpf/actions/runs/25485909958/job/74782902203
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260509005730.250956-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xfstests' test-case generic/637 fails with error:
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc4+ #8 SMP PREEMPT_DYNAMIC Thu May 1 16:43:22 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
QA output created by 637
entries 7 and 8 have duplicate d_off 8
Found unlinked files in open dir (see xfstests-dev/results//generic/637.full for details)
Debugging of the hfsplus_readdir() logic showed this:
hfsplus: hfsplus_readdir(): 163 ctx->pos 0
hfsplus: hfsplus_readdir(): 189 ctx->pos 1
hfsplus: hfsplus_readdir(): 264 ctx->pos 2, ino 18
hfsplus: hfsplus_readdir(): 264 ctx->pos 3, ino 19
hfsplus: hfsplus_readdir(): 264 ctx->pos 4, ino 28
hfsplus: hfsplus_readdir(): 264 ctx->pos 5, ino 118
hfsplus: hfsplus_readdir(): 264 ctx->pos 6, ino 29
hfsplus: hfsplus_readdir(): 264 ctx->pos 7, ino 30
hfsplus: hfsplus_readdir(): 264 ctx->pos 8, ino 31
hfsplus: hfsplus_readdir(): 304 ctx->pos 8
hfsplus: hfsplus_unlink():420 dir->i_ino 17, inode->i_ino 28
hfsplus: hfsplus_readdir(): 141 ctx->pos 7
hfsplus: hfsplus_readdir(): 264 ctx->pos 7, ino 31
hfsplus: hfsplus_readdir(): 264 ctx->pos 8, ino 32
hfsplus: hfsplus_readdir(): 264 ctx->pos 9, ino 33
It means that hfsplus_readdir() stopped the processing of
folder's items on ctx->pos 8, then, item with ino 28 has
been deleted and hfsplus_readdir() re-started the logic
from ctx->pos 7. As a result, previous and new sets of
folder's items have overlapping values for the case of
d_off 8.
Currently, HFS+ has very complicated and fragile logic
of rd->file->f_pos correction in hfsplus_delete_cat().
This patch removes this logic and it stores the current
pos into hfsplus_readdir_data. Finally, if rd->pos == ctx->pos
then hfsplus_readdir() tries to find the position in
b-tree's node by means of hfsplus_cat_key. This position is
used to re-start the folder's content traversal.
sudo ./check generic/637
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.1.0-rc1+ #44 SMP PREEMPT_DYNAMIC Mon May 4 15:58:45 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/637 22s ... 22s
Ran: generic/637
Passed all 1 tests
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/198
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260505220051.2854696-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
