Fix formatting of two labels in ebook_switch_add() to make that
function follow the current kernel coding style more closely.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14016199.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device_set_wakeup_enable() call in ebook_switch_add() doesn't
actually do anything because power.can_wakeup is not set for ACPI
device objects. Moreover, had it done anything, it would have
registered a wakeup source object that wouldn't have been used
going forward and that wakeup source would have been leaked after
driver removal because ebook_switch_remove() doesn't clean it up.
Accordingly, remove that call from ebook_switch_add().
Also prevent leaking an enabled ACPI GPE after removing the driver by
adding appropriate cleanup code to ebook_switch_remove().
Fixes: 89ca11771a ("OLPC XO-1.5 ebook switch driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1966125.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler)
Fixes: 7f80a2fd7d ("exit: Stop poorly open coding do_task_dead in make_task_dead")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge the mmc fixes for v7.1-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add voltage switching infrastructure for UHS-I modes by integrating both
regulator framework (for supply voltage control) and pinctrl state
switching (for pin drive strength optimization).
- Add regulator supply parsing and voltage switching callback
- Add optional pinctrl state switching between "default" (3.3V) and
"state_uhs" (1.8V) configurations
- Enable coordinated voltage and pin configuration changes for UHS modes
This provides complete voltage switching support while maintaining
backward compatibility when pinctrl states are not defined.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Tested-by: Vincent Legoll <legoll@online.fr>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ensure SD card pins receive clock signals by enabling pad clock
generation and overriding automatic clock gating. Required for all SD
operation modes.
The SDHC_GEN_PAD_CLK_ON setting in LEGACY_CTRL_REG is safe for both SD
and eMMC operation as both protocols use the same physical MMC interface
pins and require proper clock signal generation at the hardware level
for signal integrity and timing.
Additional SD-specific clock overrides (SDHC_OVRRD_CLK_OEN and
SDHC_FORCE_CLK_ON) are conditionally applied only for SD-only
controllers to handle removable card scenarios.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Tested-by: Vincent Legoll <legoll@online.fr>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document pinctrl properties to support voltage-dependent pin
configuration switching for UHS-I SD card modes.
Add optional pinctrl-names property with two states:
- "default": For 3.3V operation with standard drive strength
- "state_uhs": For 1.8V operation with optimized drive strength
These pinctrl states allow the SDHCI driver to coordinate voltage
switching with pin configuration changes, ensuring proper signal
integrity during UHS-I mode transitions.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Limiting the scope of devicetree support to CONFIG_OF prevents use of this
driver with ACPI via PRP0001. Drop the dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The whole purpose of the terminator entry is to be the last one.
The trailing comma makes this statement prone to failure. On top
of that the style is used for the entries is unusual. Standardize
this all by moving terminator entries to their own lines and drop
trailing commas.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Yazhou Tang says:
====================
bpf: Fix call offset truncation and OOB read in bpf_patch_call_args()
From: Yazhou Tang <tangyazhou518@outlook.com>
This patchset addresses a silent truncation bug in the BPF verifier that
occurs when a bpf-to-bpf call involves a massive relative jump offset.
Additionally, it fixes a pre-existing out-of-bounds (OOB) read issue
in the interpreter fallback path.
Because the BPF instruction set utilizes a 32-bit imm field for bpf-to-bpf
calls, implicitly downcasting it to the 16-bit insn->off in bpf_patch_call_args()
causes incorrect call targets or subprog ID resolution for large BPF programs.
While fixing this by swapping the imm and off fields, it was discovered that
the original code also had a load-time OOB read vulnerability when the stack
depth exceeds MAX_BPF_STACK during JIT fallback.
Patch 1/3 fixes the pre-existing OOB read in bpf_patch_call_args(). It
changes the function to return an int and explicitly rejects the JIT
fallback if the stack depth exceeds MAX_BPF_STACK, preventing a potential
stack buffer overflow.
Patch 2/3 fixes the s16 truncation bug.
1. Keep the original imm field unchanged and use the off field to store
the interpreter function index.
2. Adjust the JMP_CALL_ARGS case in ___bpf_prog_run() accordingly.
3. Restore the legacy xlated dump layout in bpf_insn_prepare_dump().
Patch 3/3 introduces a selftest for this fix.
---
Change log:
v10:
1. Make the error log in patch 1/3 more clear. (Kuohai)
2. Drop bpftool and disasm_helpers.c changes, and instead restore the
legacy xlated dump layout in bpf_insn_prepare_dump(). This avoids
requiring bpftool compatibility handling. (Quentin and Alexei)
v9: https://lore.kernel.org/bpf/20260429171904.107244-1-tangyazhou@zju.edu.cn/
1. Modify the selftest in patch 3/3: use __clobber_all in inline asm.
(Sashiko AI reviewer)
v8: https://lore.kernel.org/bpf/20260429105608.92741-1-tangyazhou@zju.edu.cn/
1. Update cfg_partition_funcs() in bpftool to use insn->imm for call target
calculation. (Sashiko AI reviewer)
2. Modify the selftest in patch 3/3: add a large padding before the call
instruction, preventing the kernel panic on kernel without the fix.
(Sashiko AI reviewer)
3. Modify the selftest in patch 3/3: make it more clear.
v7: https://lore.kernel.org/bpf/20260421144504.823756-1-tangyazhou@zju.edu.cn/
1. Rebase the patchset to the bpf-next tree to resolve the apply conflict.
(Alexei)
2. Add Patch 1/3 to properly fix a pre-existing OOB read in bpf_patch_call_args().
(Sashiko AI reviewer)
v6: https://lore.kernel.org/bpf/20260412170334.716778-1-tangyazhou@zju.edu.cn/
1. Use a different but clearer approach to resolve this issue: keeping
the original imm field unchanged and using the off field to store the
interpreter function index. (Kuohai)
2. Update the related dumper code and remove a previous workaround in the
selftests disasm helpers, which is no longer needed after this fix.
v5: https://lore.kernel.org/bpf/20260326090133.221957-1-tangyazhou@zju.edu.cn/
1. Some minor changes in commit messages. (AI Reviewer)
v4: https://lore.kernel.org/bpf/20260326063329.10031-1-tangyazhou@zju.edu.cn/
1. Remove some redundant commit messages of patch 2/3. (Emil)
2. Change the number of instructions in padding_subprog() from 200,000
to 32,765, which is the minimum number of instructions required to
trigger the verifier failure. (Emil)
v3: https://lore.kernel.org/bpf/20260323122254.98540-1-tangyazhou@zju.edu.cn/
1. Resend to fix a typo in v2 and add "Fixes" tag. The rest of the changes
are identical to v2.
v2 (incorrect): https://lore.kernel.org/bpf/20260323081748.106603-1-tangyazhou@zju.edu.cn/
1. Move the s16 boundary check from fixup_call_args() to bpf_patch_call_args(),
and change the return type of bpf_patch_call_args() to int. (Emil)
2. Add Patch 3/3 to fix the incorrect subprog ID in dumped bpf_pseudo_call
instructions, which is caused by the same truncation issue. (Puranjay)
3. Refine the new selftest for clarity and add detailed comments explaining
the test design. (Emil)
v1: https://lore.kernel.org/bpf/20260316190220.113417-1-tangyazhou@zju.edu.cn/
====================
Link: https://patch.msgid.link/20260506094714.419842-1-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest to verify the verifier and JIT behavior when handling
bpf-to-bpf calls with relative jump offsets exceeding the s16 boundary.
The test utilizes an inline assembly block with ".rept 32765" to generate
a massive dummy subprogram. By placing this padding between the main
program and the target subprogram, it forces the verifier to process a
bpf-to-bpf call where the imm field exceeds the s16 range.
- When JIT is enabled, it asserts that the program is successfully loaded
and executes correctly to return the expected value. Since the fix
does not change the JIT behavior, the test passes whether the fix is
applied or not.
- When JIT is disabled, it also asserts that the program is successfully
loaded and executes correctly to return the expected value 3.
- Before the fix, the verifier rewrites the call instruction with a
truncated offset (here 32768 -> -32768) and lets it pass. When the
program is executed, the call instruction will go to a wrong target
(the landing pad) instead of the intended subprogram, then return -1
and fail.
- After the fix, the verifier correctly handles the large offset and
allows it to pass. The program then executes correctly to return the
expected value 3.
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-4-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreters_args array only accommodates stack depths up to
MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger
stack depth if JIT is requested.
If JIT compilation later fails and falls back to the interpreter, the
verifier invokes bpf_patch_call_args() with this oversized stack depth.
This causes a load-time out-of-bounds (OOB) read when calculating the
interpreter function pointer index.
Fix this by changing bpf_patch_call_args() to return an int and explicitly
rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds
MAX_BPF_STACK.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When CONFIG_SERIAL_QCOM_GENI_CONSOLE is disabled, the driver still
advertises the debug UART compatible strings ("qcom,geni-debug-uart"
and "qcom,sa8255p-geni-debug-uart") in its of_match table. This lets the
driver match and probe console UART DT nodes even though console
support is not built. As a result, the console port is never registered
with the UART core and uart_add_one_port() fails with -EINVAL.
Fix this by only including the debug UART compatible entries in the
match table when CONFIG_SERIAL_QCOM_GENI_CONSOLE is enabled, preventing
the driver from probing console UART nodes when console support is
absent.
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Signed-off-by: Aniket Randive <aniket.randive@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504101045.1084672-1-aniket.randive@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comments to help clarify the provenance of the various hardcoded values
used in computing the ref clk.
Assisted-by: Gemini:Pro
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-10-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
txlen, to_send and tail variables are only used within the while() loop.
Move them to that scope to keep them closer to their usage and improve
readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-9-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If SPI is disabled, the max310x driver cannot be selected. Allow driver to
be selected if either I2C or SPI is set.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-8-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same basic code is duplicated for each of the four PLL multiplier
values, so simplify and streamline it. Doing so allows us to avoid
some unnecessary (fdiv * factor) multiplications for some fdiv values and
replace the second "if" statement with an "else if" and avoid a useless
comparison.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-5-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The baudrate used to compute the best error was changed from 115200 to
460800 in commit 35240ba26a ("tty: max310x: Fix invalid baudrate
divisors calculator"), but the comment was not updated, so fix it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-4-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having max310x_set_ref_clk() return an s32 as both an error code
and a frequency value is ambiguous. Fix by passing a pointer to the
frequency value that will then be updated, and simply return a status.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-3-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
besterr was defined as a signed type was to make sure that the first call
to max310x_update_best_err() would always set besterr. Also there is no
need for it to be a long. By changing its type to unsigned int and initial
value to UINT_MAX, max310x_update_best_err() can be simplified and be more
efficient while achieving the same initial result.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-2-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
max310x_set_ref_clk() returns a 32-bits clock value, so there is no need
to have parameters and intermediate values defined as long. Change
clock and freq types to int.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-1-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a device has a minimum baud rate > 9600 bauds, and a new termios baud
rate of 0 (hang up) is requested, uart_get_baud_rate() will return 0.
Most drivers do not check this return value and call uart_update_timeout()
with this zero baud rate, which will trigger a "Division by zero in kernel"
fault:
stty -F /dev/ttySC0 0
Division by zero in kernel.
...
Fix by returning the larger of 9600 or min for the B0 case. This now
ensures that a non-zero baud rate is returned, and greatly simplifies the
code.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the clipping logic in uart_get_baud_rate() to improve code
readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum baud rate supported by this driver is 0, so even for the B0
case, uart_get_baud_rate() will return 9600, not zero. This check predates
commit 16ae2a877b ("serial: Fix crash if the minimum rate of the device
is > 9600 baud") and is no longer necessary so remove it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum baud rate supported by this driver is 300, so even for the B0
case, uart_get_baud_rate() will return 9600, not zero. This check predates
commit 16ae2a877b ("serial: Fix crash if the minimum rate of the device
is > 9600 baud") and is no longer necessary so remove it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When uart_flush_buffer() runs before the DMA completion IRQ is delivered,
the following race can occur (all steps serialized by uart_port_lock):
1. DMA starts: tx_remaining = N, kfifo contains N bytes
2. DMA completes in hardware; IRQ is pending but not yet delivered
3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(),
making kfifo_len() = 0 while tx_remaining remains N
4. uart_flush_buffer() releases the port lock
5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls
uart_xmit_advance(uport, tx_remaining) on an empty kfifo
uart_xmit_advance() increments kfifo->out by tx_remaining. Since
kfifo_reset() already set both in and out to 0, out wraps past in,
causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next
start_tx_dma() call then submits a DMA transfer of stale buffer data.
Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()
and skipping uart_xmit_advance() when fifo_len < tx_remaining, which
indicates the kfifo was reset by a preceding flush.
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-serial-dma-stale-tx-buf-v1-1-e3ccb360d719@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpuart_start_rx_dma() allocates sport->rx_ring.buf with kzalloc() and
then maps a scatterlist via dma_map_sg(). On three subsequent error
paths the function returns directly without releasing those resources:
- when dma_map_sg() returns 0 (-EINVAL):
ring->buf is leaked.
- when dmaengine_slave_config() fails:
ring->buf and the DMA mapping are leaked.
- when dmaengine_prep_dma_cyclic() returns NULL:
ring->buf and the DMA mapping are leaked.
The sole cleanup path, lpuart_dma_rx_free(), is only reached when
lpuart_dma_rx_use is set, and the caller lpuart_rx_dma_startup() clears
that flag on failure of lpuart_start_rx_dma(). So these resources are
permanently leaked on every failure in this function. Repeated port
open/close or termios changes under error conditions will slowly consume
memory and leave stale streaming DMA mappings behind.
Fix it by introducing two error labels that unmap the scatterlist and
free the ring buffer as appropriate. While here, replace the misleading
-EFAULT (bad userspace pointer) returned when dmaengine_prep_dma_cyclic()
fails with the more accurate -ENOMEM, matching how other dmaengine users
in the tree treat this failure.
No functional change on the success path.
Fixes: 5887ad43ee ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Cc: stable <stable@kernel.org>
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260420135903.2062024-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc_davinci_irq() returns early only when both host->cmd and
host->data are NULL:
if (host->cmd == NULL && host->data == NULL) {
...
return IRQ_NONE;
}
So we may legitimately reach the rest of the handler with
host->data == NULL (and therefore data == NULL). The DATDNE branch
already guards against this with an explicit "if (data != NULL)"
check, but the subsequent TOUTRD ("read data timeout") and
CRCWR/CRCRD ("data CRC error") branches dereference data
unconditionally:
if (qstatus & MMCST0_TOUTRD) {
data->error = -ETIMEDOUT; <-- NULL deref
...
davinci_abort_data(host, data);
}
if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
data->error = -EILSEQ; <-- NULL deref
...
}
If either bit is set in qstatus while host->data is NULL, the kernel
will crash inside the IRQ handler. smatch flags this:
drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we
previously assumed 'data' could be null (see line 914)
Gate both branches on a non-NULL data, matching the existing pattern
used by the DATDNE branch.
No functional change for callers where data is non-NULL, which is
the only case in which these branches did meaningful work before
this change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 7f991e3f9b ("nvme: add quirk
NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808")
The incorrect implementations of SUBNQN is a known issue in a massive number of
NVMe units. However, the warning "nvme nvmex: missing or invalid SUBNQN field."
is usually appropriate and will not affect performance or behavior etc. That is
because the support for SUBNQN is mandatory if the controller supports NVMe
revision 1.2.1 or greater, and it reported itself without a SUBNQN field which
breaks compliance with the specification. It should be not quirked by the Linux
Kernel.
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get.
Reported-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state.
Fixes: 63a5c7a4b4 ("nvme-pci: use dma_alloc_noncontigous if possible")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
From a security standpoint we should not allow to print out the DH-HMAC-CHAP
secrets, but at the same time having them is useful for debugging
authentication failures.
So add a Kconfig option NVME_TARGET_AUTH_DEBUG to only enable debugging
if explictly requested at build time.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request.
Fixes: d0d1d52231 ("blk-map: provide the bdev to bio if one exists")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The warning is a bit alarming, and it only prints for the very first
non-sgl capable device that receives a passthrough command. Just log an
informational message on initial discovery for every device.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Include the definition of struct tty_driver in tty_port.h to keep the
header self-contained and avoid build breakage in case anyone includes
it before tty_driver.h.
Fixes: eb3b0d92c9 ("tty: tty_port: add workqueue to flip TTY buffer")
Cc: Xin Zhao <jackzxcui1989@163.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260506124323.186703-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UART_RX_PAR_EN is incorrectly defined as bit 3, which triggers false
framing errors (S_GP_IRQ_1_EN) and causes received data to be dropped
when parity is enabled and the parity bit is 0.
Define UART_RX_PAR_EN as bit 4 of the SE_UART_RX_TRANS_CFG register, as
specified in the reference manual.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable <stable@kernel.org>
Signed-off-by: Prasanna S <prasanna.s@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428-serial-bit-correct-v1-1-9131ad5b97d8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sci_request_port() function uses request_mem_region() to reserve
I/O memory, but in the error path when sci_remap_port() fails, it
incorrectly calls release_resource() instead of release_mem_region().
This mismatch can cause resource accounting issues. Fix it by using
the correct release function, consistent with sci_release_port().
Fixes: e265164708 ("serial: sh-sci: Handle port memory region reservations.")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202604032356.SzEjYkBC-lkp@intel.com/
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260421065737.724187-1-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails.
Fixes: 3c6a483275 ("Serial: EG20T: add PCH_UART driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/tencent_E328416B7CFD436F6029F2DF02AD7ED89C08@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a thinko in the status interrupt handler that has caused counters
for the RI and DSR modem line transitions to be used for the other line
each.
Fixes: 8b4a40809e ("zs: move to the serial subsystem")
Cc: stable <stable@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2604101747110.29980@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UltraRISC DP1000 UART does not provide the standard CPR register used
by 8250_dw to discover port capabilities.
Provide a fixed CPR value for the DP1000-specific compatible so the
driver can configure the port correctly.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260429-ultrarisc-serial-v7-4-e475cce9e274@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UltraRISC DP1000 integrates a Synopsys DesignWare APB UART, but it does
not provide the standard CPR and UCV registers.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260429-ultrarisc-serial-v7-3-e475cce9e274@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the magic CPR value for Renesas RZ/N1 with a composition using
DW_UART_CPR_* bit/field definitions and FIELD_PREP_CONST().
Introduce a helper macro to convert a FIFO size (bytes) into the CPR
FIFO_MODE field value, with BUILD_BUG_ON_ZERO() checks for alignment and
bounds. Use it to replace the literal FIFO_MODE values in the RZN1.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260429-ultrarisc-serial-v7-2-e475cce9e274@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
