Fetching from platform ROM doesn't work with hybrid ROM images. For
default VGA devices also prefer ROM BAR.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
Fixes: 2130f89ced ("drm/amdgpu: add SDMA v4.0 implementation (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: John B. Moore <jbmoore61@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The memory level workarounds only apply to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 127e056e2a ("drm/radeon: fix mclk vddc configuration for cards for hawaii")
Fixes: 21b8a36904 ("drm/radeon: fix dram timing for certain hawaii boards")
Fixes: 90b2fee35c ("drm/radeon: fix dpm mc init for certain hawaii boards")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align the hawaii mclk workaround with radeon and windows.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ci_populate_all_memory_levels() workaround only
applies to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the BUG_ON(flags & AMDGPU_FENCE_FLAG_64BIT) assertion from
gfx_v9_0_ring_emit_fence_kiq(). The KIQ hardware supports 64-bit
fence writes; the 32-bit writeback address constraint is an
upper-layer convention, not a hardware limitation. The check serves
no purpose and should not be present.
Found by code inspection while investigating related BUG_ON
assertions in the GFX and compute ring emission paths.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: John B. Moore <jbmoore61@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ring preemption function is identical for both gfx_v11_0 and
gfx_v12_0. This patch refactors the code by moving the core logic
into a generic function inside amdgpu_gfx.c to reduce code
duplication and simplify future maintenance.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leonardo Cesar <leonardocesar@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With only one sequence number we cannot track the need for legacy vs
heavy-weight flushes reliably. Always use heavy-weight.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix all kernel-doc warnings in amdgpu.h and amdgpu_reset.h:
- Use the struct keyword for kernel-doc struct comments.
- Use the correct enum names in enum amd_reset_method.
This eliminates these warnings:
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:477 cannot understand
function prototype: 'struct amdgpu_wb'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_LEGACY' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE0' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE1' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE2' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_LINK' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_BACO' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_PCI' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_ON_INIT' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_LEGACY' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE0' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE1' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE2' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_LINK' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_BACO' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_PCI' description in 'amd_reset_method'
Also move the enum to amdgpu_reset.h and eventually only forward declare
it in amdgpu.h. (Christian)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For enums that have a kernel-doc ("/**") comment block, add or correct
their kernel-doc to eliminate all kernel-doc enum warnings.
Some of these needed "struct" changed to "enum" in the kernel-doc header.
For a few of them, I changed the "/**" comment to a plain "/*"
comment since there was no kernel-doc content there.
Example:
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_NONE' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_START' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_PREPARE' not described in enum 'dmub_fams2_allow_delay_check_mode'
All .o files are the same with or without this patch.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct all typedef, struct, and union prototype warnings in
dmub_cmd.h by using the matching names or "typedef" keyword:
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:961 cannot understand function prototype: 'typedef uint32_t dmub_trace_code_t;'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1183 expecting prototype for union dmub_shared_state_ips_fw. Prototype was for union dmub_shared_state_ips_fw_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1203 expecting prototype for union dmub_shared_state_ips_signals. Prototype was for union dmub_shared_state_ips_driver_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1253 expecting prototype for struct dmub_shared_state_cursor_offload_v1. Prototype was for struct dmub_shared_state_cursor_offload_stream_v1 instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1269 struct dmub_shared
_state_feature_common { uint32_t padding[62]; };: error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1278 struct dmub_shared
_state_feature_header { uint16_t id; uint16_t version; uint32_t reserved; };:
error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2001 expecting prototype for struct dmub_cmd_read_modify_write_sequence. Prototype was for struct dmub_rb_cmd_read_modify_write instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2191 expecting prototype for struct dmub_rb_cmd_cab. Prototype was for struct dmub_rb_cmd_cab_for_ss instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2875 expecting prototype for struct dmub_cmd_set_pixel_clock_data. Prototype was for struct dmub_rb_cmd_set_pixel_clock instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3398 expecting prototype for union dpia_notify_data_type. Prototype was for union dpia_notification_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3447 expecting prototype for struct dmub_rb_cmd_hpd_sense_notify. Prototype was for struct dmub_rb_cmd_hpd_sense_notify_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:6267 expecting prototype for struct dmub_cmd_cable_id_input. Prototype was for struct dmub_cmd_cable_id_output instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_I915_SW_FENCE_DEBUG_OBJECTS currently selects DEBUG_OBJECTS even though
DEBUG_OBJECTS is visible to users. Other config options use 'depends on'
for DEBUG_OBJECTS, so let's do the same here.
This select-visible Kconfig misusage was detected by Kconfirm, a static
analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260502191932.4491-1-julianbraha@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path.
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/d2ea98a6313d5467bac00f7c9fef8c7acddb9258.1777550074.git.tonanli66@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function drm_of_get_data_lanes_count_remote() returns negative error
codes and dsi->lanes is an unsigned integer, so the check (dsi->lanes <
0) is always impossible.
Detected by Smatch:
drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c:2959 jadard_dsi_probe()
warn: unsigned 'dsi->lanes' is never less than zero.
Fixes: eb019688f2 ("drm/panel: jadard-jd9365da-h3: support variable DSI configuration")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260429024954.697411-1-ethantidmore06@gmail.com
The devm_drm_panel_alloc() function returns an error pointer on failure,
not NULL. Fix the check to use IS_ERR() and return PTR_ERR() to
correctly handle allocation failures.
Fixes: 07853e9542 ("drm/panel: add driver for Waveshare 8.8" DSI TOUCH-A panel")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260429080527.1456732-1-nichen@iscas.ac.cn
Ilya Maximets says:
====================
openvswitch: fix self-deadlock on release of tunnel vports
Two patches - the fix for the actual bug and the selftest that reproduces it.
I missed the self-deadlock in the original patch that introduced the issue,
because testing required code modification in the ovs-vswitchd to force it to
use legacy tunnel ports. I thought I made the change correctly, but apparently
something went wrong and the tests were run with the standard LWT infra instead.
The selftest added in this patch set will at least prevent this kind of mistakes
in the future.
I mentioned, however, that these tunnel vports are legacy and not actually used
by ovs-vswitchd. RTM_NEWLINK + COLLECT_METADATA is used in conjunction with the
standard OVS_VPORT_TYPE_NETDEV instead since 2017. The code to use the legacy
tunnels still exists in ovs-vswitchd however, but only as a fallback for older
kernels and we're planning to remove it in the next release. I'll be sending an
RFC to remove support for these legacy tunnel types from the kernel, as they
serve no real purpose today and only increase the uAPI surface for CVEs, but
we need to fix the known bugs for stable versions.
v1: https://lore.kernel.org/netdev/20260429151756.4157670-1-i.maximets@ovn.org/
====================
Link: https://patch.msgid.link/20260430233848.440994-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There were a few issues found with the tunnel vport types around the
vport destruction code. Add some basic tests, so at least we know that
they can be properly added and removed without obvious issues.
The test creates OVS datapath, adds a non-LWT tunnel port, makes sure
they are created, and then removes the datapath and waits for all the
ports to be gone.
The dpctl script had a few bugs in the none-lwt tunnel creation code,
so fixing them as well to make the testing possible:
- The type of the --lwt option changed in order to properly disable it.
- Removed byte order conversion for the port numbers, as the value
supposed to be in the host order.
- Added missing 'gre' choice for the tunnel type.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-3-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released.
Fixes: 6931d21f87 ("openvswitch: defer tunnel netdev_put to RCU release")
Cc: stable@vger.kernel.org
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-2-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a tunnel vport is created it first creates the tunnel device, e.g.,
with geneve_dev_create_fb(), then it calls ovs_netdev_link() to take a
reference and link it to the device that represents openvswitch datapath.
The creation of the device is happening under RTNL, but then RTNL is
released and re-acquired to find the device by name. It is technically
possible for the tunnel device to be re-named or deleted within that
window while RTNL is not held, and some other device created in its
place. This will cause a non-tunnel device to be referenced in the
vport and tunnel-specific functions used on it, e.g. vxlan_get_options()
that directly casts the private netdev data into a struct vxlan_dev
causing an invalid memory access:
BUG: KASAN: slab-use-after-free in vxlan_get_options+0x323/0x3a0
vxlan_get_options+0x323/0x3a0
ovs_vport_cmd_new+0x6e3/0xd30
Fix that by taking a reference to the just created device before
releasing RTNL. This ensures that the device in the vport is always
the one that was just created. The search by name is only needed
for a standard vport-netdev that links pre-existing devices, so that
functionality and device type checks are moved to netdev_create().
It is also awkward that ovs_netdev_link() takes ownership of the vport
and destroys it on failure. It doesn't know the type of the port it is
dealing with, so we need to pass down the indicator that it's a tunnel,
so the link can be properly deleted on failure.
It's possible to refactor the logic to make the ovs_netdev_link() do
only the linking part and let the callers perform a proper destruction,
but it will be much more code for each legacy tunnel port type, so it
is not worth it for the bug fix.
Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Reported-by: Yuan Tan <tanyuan98@outlook.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260430213349.407991-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On j721s2, PMIC-B is needed to exit the DDR from retention after
suspend-to-ram. Add bootph-pre-ram property to make PMIC-B available to
the bootloader in the phase that sets up the DDR.
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260429-k3-j721s2-som-bootph-pre-ram-pmic-4c-v2-1-31a0e7677216@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name.
Fixes: d5fe2fec6c ("EDAC: Add a driver for the AMD Versal NET DDR controller")
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260401111856.2342975-1-ptsm@linux.microsoft.com
Currently, as noted in the comment, ieee80211_uhr_oper_size_ok()
will reject the element coming from the beacon, since it's too
short. However, this is incorrect in general, since the element
is extensible, and such extensions could be present in a beacon,
and then it might pass muster anyway.
Using the frame type we now have in the element parse result,
check that it's not coming from a beacon. The size was already
checked (according to frame type) during parsing.
Link: https://patch.msgid.link/20260428112708.41a7aacdda0c.I0d83c8c9cbee41fd2599480cad815b94867aa1f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Put the NPCA parameters into a chandef when parsing data from
the AP to validate them using the cfg80211 code, rather than
implementing that in mac80211 directly.
Note that the parameters are not applied yet, since mac80211
doesn't yet have NPCA support.
Link: https://patch.msgid.link/20260428112708.418e86f9444c.I54430f3018e39a26b4252d71000d7bb7dd744331@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since 802.11bn D1.4 the DBE capabilities are after the
PHY capabilities, not between MAC and PHY, adjust the
code accordingly.
Also add a struct for DBE capabilities and use it for
checking the correct length instead of hard-coding the
lengths.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103657.b40af50f182d.I75306a092dc2c8a9eb7276160f0b7144b4846d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The interface frame queue processing code currently
differentiates many frame types and below those the
interface types, but then falls through to per-type
processing. Move this code to the per-type functions,
creating a new ap.c file that gets relevant code, and
this way reduce the number of non-static symbols.
This also helps with adding more cases for UHR later.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103649.c00059e68a07.I2269130278390f534d6051fac424402a854a54aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce support for continuous ranging and advanced timing
parameters in the FTM request, response, and capability paths.
This enables more flexible ranging scenarios with improved control
over measurement timing and session management.
Co-developed-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-14-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Many boards use on-board mux chips (often controlled by GPIOs from an I2C
expander) to switch shared signals between peripherals.
Add a generic pinctrl driver built on top of the mux framework to
centralize mux handling and avoid probe ordering issues. Keep board-level
routing out of individual drivers and supports boot-time only mux
selection.
Ensure correct probe ordering, especially when the GPIO expander is probed
later.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
