When firmware enables 64-bit PCI host bridge support, some root bridges
already provide valid 64-bit mem resource windows through ACPI.
In this case, the LoongArch-specific mem resource high-bits fixup in
acpi_prepare_root_resources() should not be applied unconditionally.
Otherwise, the kernel may override the native resource layout derived
from firmware, and later BAR assignment can fail to place device BARs
into the intended 64-bit address space correctly.
Add a per-root-bridge ACPI flag, PCIH, and evaluate it from the current
root bridge device scope. When PCIH is set, skip the mem resource high-
bits fixup path and let the kernel use the firmware-provided resource
description directly. When PCIH is absent or cleared, keep the existing
behavior and continue filling the high address bits from the host bridge
address.
This makes the behavior per-root-bridge configurable and avoids breaking
valid 64-bit BAR space allocation on bridges whose 64-bit windows have
already been fully described by firmware.
Cc: stable@vger.kernel.org
Suggested-by: Chao Li <lichao@loongson.cn>
Tested-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The SYM_SIGFUNC_START definition should match sigcontext that the length
of GPRs are 8 bytes for both 32BIT and 64BIT. So replace SZREG with 8 to
fix it.
Cc: stable@vger.kernel.org
Fixes: e4878c37f6 ("LoongArch: vDSO: Emit GNU_EH_FRAME correctly")
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Clang/LLVM build needs -m32/-m64 to switch triple variants (i.e. the
--target=xxx parameter). Otherwise we get build errors for CONFIG_32BIT.
GCC doesn't support -m32/-m64 now, but maybe support in future, so use
cc-option to specify them.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604232041.ESJDwVG4-lkp@intel.com/
Suggested-by: Nathan Chancellor <nathan@kernel.org
Tested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CONFIG_64BIT is the mandatory option before v7.0, but in v7.1-rc1 both
CONFIG_32BIT and CONFIG_64BIT are selectable and CONFIG_32BIT became the
default option. This breaks existing configurations, so explicitly make
CONFIG_64BIT as the default option to keep existing behavior.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
* Check that nEPT/nNPT is enabled in slow flush hypercalls. If it is
not, the hypercalls can be processed as usual even while running a
nested guest.
* Fix shadow paging use-after-free due to page tables changing outside
execution of the guest. A bug that is 16 years old and stems from an
imprecision in the very first KVM series.
* Scan IRR whenever PID.ON is true, even if PIR is empty, which avoids
a somewhat rare WARN.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmn3sQoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNMdQf/WuwNbJCb2bVWCoNeQUWvtxrlmZ5p
IqQrnEACYOkn20eWDrXrAiEqPoIj0fPTYSewU9mYoC5DhyGFXzB5TEwMMHUn9kNn
QVBQS/IlfuhO5BGrov4dbdmzUmXaTuUe29tjoOnr1IGNapf6naA9+m03u5/TaZcd
FtS28EPy5Z2ZRm3KiKrZahsMMVr9ZXI3xfiEFVht9lDwiYpZquxhH2bju3QnBQ71
0x02ZxMKbqwi5uJLCGmF62AacCSqag1+eNs05WFPThL5RNNkwpac1lceOetYFm9/
y+iqOfev4SYeL3rACyQ/nStpgdkhpL2cbkPISRvjQ0WKVVawk+IAzNzvsQ==
=sGxH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Three bug fixes for x86:
- Check that nEPT/nNPT is enabled in slow flush hypercalls. If it is
not, the hypercalls can be processed as usual even while running a
nested guest
- Fix shadow paging use-after-free due to page tables changing
outside execution of the guest. A bug that is 16 years old and
stems from an imprecision in the very first KVM series
- Scan IRR whenever PID.ON is true, even if PIR is empty, which
avoids a somewhat rare WARN"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix shadow paging use-after-free due to unexpected GFN
KVM: x86: Fix misleading variable names and add more comments for PIR=>IRR flow
KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty
KVM: x86: check for nEPT/nNPT in slow flush hypercalls
The driver uses devm_add_action_or_reset() to register sprd_wdt_disable()
as a managed cleanup action.
When devm_watchdog_register_device() fails, the devm core will invoke
the cleanup action automatically.
The explicit sprd_wdt_disable() call in the error path is therefore
redundant and results in adouble cleanup.
Fixes: 78d9bfad2e ("watchdog: sprd_wdt: Convert to use device managed functions and other improvements")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20260223-sprd_wdt-v1-1-2e71f9a76ecb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Kernel now supports chained power-off handlers. Use
devm_register_sys_off_handler() that registers a power-off handler. Legacy
pm_power_off() will be removed once all drivers and archs are converted to
the new sys-off API.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20260302180853.224112-1-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus
the SPTE index. This assumption breaks for shadow paging if the guest
page tables are modified between VM entries (similar to commit
aad885e774, "KVM: x86/mmu: Drop/zap existing present SPTE even
when creating an MMIO SPTE", 2026-03-27). The flow is as follows:
- a PDE is installed for a 2MB mapping, and a page in that area is
accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages;
the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because
the guest's mapping is a huge page (and thus contiguous).
- the PDE mapping is changed from outside the guest.
- the guest accesses another page in the same 2MB area. KVM installs
a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN
(i.e. based on the new mapping, as changed in the previous step) but
that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore
the rmap entry cannot be found and removed when the kvm_mmu_page
is zapped.
- the memslot that covers the first 2MB mapping is deleted, and the
kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove()
only looks at the [sp->gfn, sp->gfn + 511] range established in step 1,
and fails to find the rmap entry that was recorded by step 3.
- any operation that causes an rmap walk for the same page accessed
by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page.
This includes dirty logging or MMU notifier invalidations (e.g., from
MADV_DONTNEED).
The underlying issue is that KVM's walking of shadow PTEs assumes that
if a SPTE is present when KVM wants to install a non-leaf SPTE, then the
existing kvm_mmu_page must be for the correct gfn. Because the only way
for the gfn to be wrong is if KVM messed up and failed to zap a SPTE...
which shouldn't happen, but *actually* only happens in response to a
guest write.
That bug dates back literally forever, as even the first version of KVM
assumes that the GFN matches and walks into the "wrong" shadow page.
However, that was only an imprecision until 2032a93d66 ("KVM: MMU:
Don't allocate gfns page for direct mmu pages") came along.
Fix it by checking for a target gfn mismatch and zapping the existing
SPTE. That way the old SP and rmap entries are gone, KVM installs
the rmap in the right location, and everyone is happy.
Fixes: 2032a93d66 ("KVM: MMU: Don't allocate gfns page for direct mmu pages")
Fixes: 6aa8b732ca ("kvm: userspace interface")
Reported-by: Alexander Bulekov <bkov@amazon.com>
Reported-by: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260503201029.106481-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_apic_update_irr()'s "irr_updated" and vmx_sync_pir_to_irr()'s
"got_posted_interrupt" to a more accurate "max_irr_is_from_pir", as neither
"irr_updated" nor "got_posted_interrupt" is accurate.
__kvm_apic_update_irr() and thus kvm_apic_update_irr() specifically return
true if and only if the highest priority IRQ, i.e. max_irr, is a "new"
pending IRQ from the PIR. I.e. it's possible for the IRR to be updated,
i.e. for a posted IRQ to be "got", *without* the APIs returning true.
Expand vmx_sync_pir_to_irr()'s comment to explain why it's necessary to
set KVM_REQ_EVENT only if a "new" IRQ was found, and to explain why it's
safe to do so only if a new IRQ is also the highest priority pending IRQ.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260503201703.108231-3-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fall back to apic_find_highest_vector() when PID.ON is set but PIR
turns out to be empty, to correctly report the highest pending interrupt
from the existing IRR.
In a nested VM stress test, the following WARNING fires in
vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending
interrupt but the subsequent kvm_apic_has_interrupt() (which invokes
vmx_sync_pir_to_irr() again) returns -1:
WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel]
Call Trace:
kvm_check_and_inject_events
vcpu_enter_guest.constprop.0
vcpu_run
kvm_arch_vcpu_ioctl_run
kvm_vcpu_ioctl
__x64_sys_ioctl
do_syscall_64
entry_SYSCALL_64_after_hwframe
The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU
and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender
performs two individually-atomic operations that are not a single
transaction:
1. pi_test_and_set_pir(vector) -- sets the PIR bit
2. pi_test_and_set_on() -- sets PID.ON
The following interleaving triggers the bug:
Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr):
B1: set PIR[vector]
A1: pi_clear_on()
A2: pi_harvest_pir() -> sees B1 bit
A3: xchg() -> consumes bit, PIR=0
(1st sync returns correct max_irr)
B2: set PID.ON = 1
Target vCPU (2nd sync_pir_to_irr):
C1: pi_test_on() -> TRUE (from B2)
C2: pi_clear_on() -> ON=0
C3: pi_harvest_pir() -> PIR empty
C4: *max_irr = -1, early return
IRR NOT SCANNED
The interrupt is not lost (it resides in the IRR from the first sync and
is recovered on the next vcpu_enter_guest() iteration), but the incorrect
max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.
Fixes: b41f8638b9 ("KVM: VMX: Isolate pure loads from atomic XCHG when processing PIR")
Reported-by: Farrah Chen <farrah.chen@intel.com>
Analyzed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/20260428070349.1633238-1-chenyi.qiang@intel.com/T/
Link: https://patch.msgid.link/20260503201703.108231-2-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()
is only valid if an L2 guest is running *with nested EPT/NPT enabled*.
Instead use the same condition as translate_nested_gpa() itself.
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: aee738236d ("KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs", 2022-11-18)
Link: https://patch.msgid.link/20260503200905.106077-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read USB2_ADPCTRL once in rcar_gen3_check_id() instead of issuing
multiple MMIO reads, and derive both IDDIG and VBUSVALID from the same
value.
Drop the redundant !! operator, as assigning a masked u32 value to a
bool already performs the required normalization. Simplify the logic by
comparing the ID and VBUS status directly, which is equivalent to the
previous conditional but easier to follow.
Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/acJVCOdlchLiSe5n@duo.ucw.cz/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325112039.464992-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For eDP low vdiff, the LDO setting depends on the PHY version rather
than being a simple 0x0 or 0x1 value. Introduce a PHY callback to program
the correct LDO setting according to the HPG.
Since SC7280/SC8180X uses different LDO settings from SA8775P/SC8280XP,
introduce qcom_edp_phy_ops_v3 to keep the LDO setting correct.
Cc: stable@vger.kernel.org
Fixes: f199223cb4 ("phy: qcom: Introduce new eDP PHY driver")
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP X13s
Link: https://patch.msgid.link/20260427-edp_phy-v5-5-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AUX_CFG8 depends on whether the PHY is operating in eDP or DP mode, not
the selected swing/pre-emphasis table. All supported platforms already
have the proper tables, so remove the unnecessary check.
Cc: stable@vger.kernel.org
Fixes: 6078b8ce07 ("phy: qcom: edp: Add set_mode op for configuring eDP/DP submode")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-4-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SC7280 and SC8180X previously shared the same cfg because they did not use
swing/pre-emphasis tables. Add the corresponding tables for these
platforms. Since they have different PHY sub-versions, their eDP/DP mode
tables also differ, so move SC8180X to its own cfg instead of reusing the
SC7280 one.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-3-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The eDP PHY supports both eDP/DP modes, each requiring a different
swing/pre-emphasis table. However, the driver currently uses a fixed
static table for eDP programming rather than selecting the appropriate
table based on the current mode. Add separate tables for eDP and DP
modes, and select the appropriate table dynamically based on the
current mode.
Glymur's DP mode table differs from the other platforms, add a
dedicated table for it.
This also fixes the table mismatch for X1E80100 (eDP) and SA8775P (DP).
Cc: stable@vger.kernel.org
Fixes: 3f12bf1621 ("phy: qcom: edp: Add support for eDP PHY on SA8775P")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-2-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current eDP and DP swing/pre-emphasis tables do not match the HPG
requirements for the supported platforms, correct the table accordingly.
The generic tables which can be shared as follows:
DP mode：
-sa8775p/sc7280/sc8280xp/x1e80100
-glymur
-sc8180x
eDP mode(low vdiff):
-glymur/sa8775p/sc8280xp/x1e80100
-sc7280
-sc8180x
The proper tables for SC8180X and SC7280 will be added in a later patch,
since they need separate table.
Cc: stable@vger.kernel.org
Fixes: f199223cb4 ("phy: qcom: Introduce new eDP PHY driver")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-1-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
checkpatch reports an improper SPDX comment style for this header:
WARNING: Improper SPDX comment style for
'drivers/phy/phy-airoha-pcie-regs.h', please use '/*' instead
Per Documentation/process/license-rules.rst, C header files must use the
'/* SPDX-License-Identifier: ... */' form instead of the '// ....' form
used in C source files. Fix it.
Signed-off-by: Aditya Dabhade <aditya.dabhade066@gmail.com>
Link: https://patch.msgid.link/20260428193459.5865-1-aditya.dabhade066@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
`sdw_of_find_slaves()` fetches raw `"compatible"` bytes with
`of_get_property()` and then immediately parses them with
`sscanf("sdw%01x%04hx%04hx%02hhx", ...)`.
Live-tree OF properties are stored as raw bytes plus a separate length;
they are not globally guaranteed to be NUL-terminated. Validate the
first compatible string before parsing it.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260403183504.4-soundwire-compatible-pengpeng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add cs42l43b (both packaging options) to the wake_capable_list
because it can generate jack events whilst the bus is stopped.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260429153614.741899-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In sdw_stream_remove_slave() check that stream is a valid pointer
before passing it to functions that dereference it. Return 0 if the
pointer is invalid.
This is a convenience for callers. They can safely call this function
during cleanup code without needing a pointer validity check duplicated
at every call point.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260430143353.2702714-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the support for the watchdog IP available on RZ/G3L SoC. The
watchdog IP available on RZ/G3L SoC is identical to the one found on
RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260206112227.233229-1-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When the bindings for the Renesas RZ/V2H(P) SoC were factored
out IP WDT0 was selected for the example, however the HW user
manual states that only IP WDT1 can be used by Linux.
This commit is part of a series that removes WDT{0,2,3} support
from the kernel, therefore the example from the bindings has
lost its meaning.
Update the example accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20260203124247.7320-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- sh: Fix fallout from ZERO_PAGE consolidation
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmn3X0MACgkQdCY7N/W1
+RNzqhAAnKdBTXt7Ks1qYfCA1zrpTUPSLkJeyX/rjfmFHJkSoH9onmUhxOXPc5jp
TT1Jy8YjN8GEPd2Qis5e2FDM+yvF8wMfScQRaSE52WR8bXddQLTjQBK7+nyyPJNu
xJWymOufB7wooD9Qsg4jf7zmTcODMskT/F9i5EQxYA8bSt4/EVMKdhNF8k4goDwT
vpw4TYmWYj/tDndWe5zZNkok4kT6TZDQ/shiaqSSq5N0YpCBkKrsNP19zrxs1iQM
UCu/M5UvWkj6JukBuYQAZE642a7jvpvNCR74/l3DtF4kTTUoSYFozQ0LshXRVI94
46vpGZXRVsxiCjGNPB+XWLY9cJ9j2T8vVBuBfabRZjlllxOT9ygQ4n5pRVAwx2jW
VJP6w1AnCUea0fZ0BP2yOxFee48b4QIP2YufArAMKy2mtkAiwx3iDIxi0u43uZyG
TuyYQ6hKRFDoE157qYRoizMeBWf18FCsPg1hd7cWIu8E2xxTJaUss/qgwZAqLcFU
W2/RiUDLfFgyHCY9CM9go+ZgzbRWGUEItSLPv3AUgBlbFPscByjQzISU0ed6XjQ9
XMNKcIow6lwRkFpWf9CDcRqNn+9ey551tQvCyDsStp8h99V6buyX1nvndupDspZz
+l49H7GVwyIA9eqoTucCMNn5isx+KAsa2KeSjOyup9o0eGYr0Os=
=6ywF
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh fix from John Paul Adrian Glaubitz:
"The ZERO_PAGE consolidation in v7.1, introduced a regression on sh
which made these systems unbootable.
The problem was that on sh, the initial boot parameters were
previously referenced as an array and after 6215d9f447 ("arch, mm:
consolidate empty_zero_page"), they were referenced as a pointer which
caused wrong code generation and boot hang.
This changes the declaration back to being an array which fixes the
boot hang"
* tag 'sh-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: Fix fallout from ZERO_PAGE consolidation
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 354f31e9d2 ("dt-bindings: watchdog:
Add SMARC-sAM67 support").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260302122540.1377444-7-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver hardcoded AT91_WDT_WDDIS (bit 15) in wdt_enabled and the
probe initial state readout. SAM9X60 and SAMA7G5 use bit 12
(AT91_SAM9X60_WDDIS), causing incorrect WDDIS detection.
Introduce a per-device wddis_mask field to select the correct WDDIS
bit based on the compatible string.
Fixes: 266da53c35 ("watchdog: sama5d4: readout initial state")
Co-developed-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20260302113310.133989-2-balakrishnan.s@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Mauro says:
This patch series change the way maintainer entry profile links
are added to the documentation. Instead of having an entry for
each of them at an ReST file, get them from MAINTAINERS content.
That should likely make easier to maintain, as there will be a single
point to place all such profiles.
The output is a per-subsystem sorted (*) series of links shown as a
list like this:
- Arm And Arm64 Soc Sub-Architectures (Common Parts)
- Arm/Samsung S3C, S5P And Exynos Arm Architectures
- Arm/Tesla Fsd Soc Support
...
- Xfs Filesystem
Please notice that the series is doing one logical change per patch.
I could have merged some changes altogether, but I opted doing it
in small steps to help reviews. If you prefer, feel free to merge
maintainers_include changes on merge.
There is one interesting side effect of this series: there is no
need to add rst files containing profiles inside a TOC tree: Just
creating the file anywhere inside Documentation and adding a P entry
is enough. Adding them to a TOC won't hurt.
On Qualcomm SoCs running under the Gunyah hypervisor, access to watchdog
through MMIO is not available on all platforms. Depending on the
hypervisor configuration, the watchdog is either fully emulated or
exposed via ARM's SMC Calling Conventions (SMCCC) through the Vendor
Specific Hypervisor Service Calls space.
Add driver to support the SMC-based watchdog provided by the Gunyah
Hypervisor. Device registration is done in the QCOM SCM driver after
checks to restrict the watchdog initialization to Qualcomm devices
running under Gunyah.
Gunyah watchdog is not a hardware but an SMC-based vendor-specific
hypervisor interface provided by the Gunyah hypervisor. The design
involving QCOM SCM driver for registering the platform device has been
devised to avoid adding non-hardware nodes to devicetree.
Tested-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Hrishabh Rajput <hrishabh.rajput@oss.qualcomm.com>
Signed-off-by: Pavankumar Kondeti <pavan.kondeti@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-gunyah_watchdog-v8-2-4c1c0689de22@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The gpio_wdt device driver uses the device property APIs, so it is
firmware agnostic. For this reason we can now add the ACPI support in
Kconfig.
In this way it can be used seamlessly in ACPI and DT systems.
For example, a typical GPIO watchdog device configuration, in an ACPI
SSDT table, could be:
Device (WDOG) {
Name (_HID, "WDOG0001")
Name (_CID, "PRP0001")
Name (_UID, One)
Name (_CRS, ResourceTemplate () {
GpioIo (Exclusive, PullNone, 0, 0, IoRestrictionOutputOnly,
"\\_SB.GPI0", 0, ResourceConsumer, ,) { 3 }
})
Method (_STA, 0, NotSerialized) {
Return (0x0F)
}
Name (_DSD, Package (2)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (5)
{
Package () { "compatible", Package() { "linux,wdt-gpio" } },
Package () { "hw_algo", "toggle" },
Package () { "gpios", Package () { ^WDOG, 0, 0, 0 } },
Package () { "hw_margin_ms", 2000 },
Package () { "always-running", 1 },
},
})
}
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260323125204.164785-2-f.suligoi@asem.it
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The watchdog hardware the hpwdt driver uses was added to the UV
platform for UV_5, but the logging mentioned by this driver was not
added to the BIOS. When the watchdog fires, the printed message had
the administrators and developers looking for non-existent log files,
and confused about whether a watchdog actually tripped.
Change the message that prints on UV platforms so it doesn't send the
user looking for non-existent logs.
To aid in any future debugging, include all 8 bits of the NMISTAT
register in the output, not just the two bits being used to determine
this was "mynmi". And provide names to the bits in NMISTAT so the
code is easier to understand.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260318155005.90271-1-steve.wahl@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since commit 1f4ea4838b ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260323112413.21923-2-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Variables declared in probe() don't follow the reverse xmas
tree convention.
Fix the declaration in order to follow the convention.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260324114849.242755-2-herve.codina@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In the probe() function the following pattern is present several times:
if (err) {
dev_err(dev, ...);
return err;
}
Replace them by dev_err_probe() calls.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260324114849.242755-3-herve.codina@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 009637de1f ("watchdog: sp5100_tco: support Hygon FCH/SCH
(Server Controller Hub)") added Hygon vendor matching to the efch
layout selection, but newer Hygon 0x790b SMBus devices still need the
efch_mmio path.
The efch_mmio path enables EFCH_PM_DECODEEN_WDT_TMREN before probing the
watchdog MMIO block. If firmware leaves that bit clear and the driver
picks the legacy efch path instead, probe falls back to the alternate
window and fails with "Watchdog hardware is disabled".
Select efch_mmio for Hygon 0x790b devices with revision 0x51 or later,
matching the equivalent AMD behavior and allowing the watchdog to
initialize on those systems.
Fixes: 009637de1f ("watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)")
Signed-off-by: Yingjie Gao <gaoyingjie@uniontech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260402071617.634563-2-gaoyingjie@uniontech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When the system boots up after a watchdog reset, the EXPIRED_STATUS bit
in the WDT_STS register is cleared. To identify if the system was
restarted due to WDT expiry, XBL update the information in the IMEM region.
Update the driver to read the restart reason from IMEM and populate the
bootstatus accordingly.
With the CONFIG_WATCHDOG_SYSFS enabled, user can extract the information
as below:
cat /sys/devices/platform/soc@0/f410000.watchdog/watchdog/watchdog0/bootstatus
32
For backward compatibility, keep the EXPIRED_STATUS bit check. Add a new
function qcom_wdt_get_bootstatus() to read the restart reason from
IMEM.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-wdt_reset_reason-v10-2-caf66786329f@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the "sram" property for the watchdog device on Qualcomm
IPQ platforms. Use this property to extract the restart reason from
IMEM, which is updated by XBL. Populate the watchdog's bootstatus sysFS
entry with this information, when the system reboots due to a watchdog
timeout.
Describe this property for the IPQ5424 watchdog device and extend support
to other targets subsequently.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-wdt_reset_reason-v10-1-caf66786329f@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260422082736.81981-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The machzwd driver supports the integrated watchdog of the ZF Micro
ZFx86 SoC, which contains a 486-compatible core [1]. Since 486
support was removed in commit 8b793a92d8 ("x86/cpu: Remove
M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.
[1] https://www.zfmicro.com/zfx86.html
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260428014806.35400-1-enelsonmoore@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change the logic to parse MAINTAINERS file content just once,
while still allowing using it multiple times.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <8060589074f54a276e563db8cad124d3f88346c7.1777295258.git.mchehab+huawei@kernel.org>
os.path.relpath() will do the wrong thing with O=dir, as the build
system uses "cd <dir>" internally.
Solve it by using app.srcdir, which, on normal cases, point to
Documentation/, or, when SPHINXDIRS=process, it will be set with
Documentation/process.
While here, remove a dead code while writing maintainer profiles,
as now all entries should have both profile and entry.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-doc/88335220-3527-4b1f-9500-417f7ebb7a02@infradead.org/T/#m6854cbd8d30e2c5d3e8c4173bae1c3d6922ff970
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <193792d73d08d9f8b9faa8b3df8a1a7439344a28.1777295258.git.mchehab+huawei@kernel.org>
There are three "types" of profiles:
1. Profiles already included inside subsystem-specific documentation.
This is the most common case;
2. Profiles that are hosted externally;
3. Profiles that are at the same location as maintainer-handbooks.rst.
For (3), we need to create a TOC, as they don't exist elsewhere.
Change the logic to create TOC just for (3), prepending the
content of maintainer-handbooks with a sorted entry of all types,
before the TOC.
With such change, we can have an unique sorted list of profiles,
having the subsystem names used there listed.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <10d06a3f530e07ad981aba93617a9a7f4d63c408.1777295258.git.mchehab+huawei@kernel.org>
Instead of showing as a "Contents:" with 2 identation levels,
drop its title and show profiles as a list of entries.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <387b42c523e7b9f33e61cdff6fadb1df265cf71d.1777295258.git.mchehab+huawei@kernel.org>
When a maintainer's profile is stored outside process, they're
already included on some other book and the name of the filesystem
may not be there. That's why the logic picks the name from the
subsystem's name.
However, files directly placed together with maintainers-handbooks.rst
(e.g. under Documentation/process/) is a different history: those
aren't placed anywhere, so we can keep using their own names,
letting Sphinx do his thing.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <46961bc932be804cec19f06d202c23423d4aa12a.1777295258.git.mchehab+huawei@kernel.org>
Some subsystem profiles are maintained elsewhere. Add them to
the output.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b80639a38abdc934589e88bc9fc3029ad5c20bfe.1777295258.git.mchehab+huawei@kernel.org>
