PTR_ERR() returns a negative value, so comparing against the positive
EAGAIN is always true for ERR_PTR(-EAGAIN), causing pf_migration_consume()
to bail out instead of continuing to the remaining GTs. On multi-GT
platforms this can skip GTs that already have data ready.
Compare against -EAGAIN to match the intent (and the following line
that correctly uses -EAGAIN). While at it, gate PTR_ERR() with
IS_ERR().
v2: add IS_ERR() guard before PTR_ERR(). (Gustavo)
Fixes: 67df4a5cbc ("drm/xe/pf: Add data structures and handlers for migration rings")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260428201448.3999428-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Ivan Vecera says:
====================
dpll: add pin operational state
Add pin operational state (operstate) to the DPLL subsystem to
separate administrative intent from actual hardware status.
Currently pin-state mixes what the user requested (connected,
selectable, disconnected) with what the hardware is actually doing.
This makes it difficult to diagnose situations where a user sets
a pin as selectable or connected but the hardware cannot use it
due to signal issues.
The new operstate attribute is reported inside the pin-parent-device
nest alongside the existing state and is read-only. Defined values:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification checks
Patch 1 adds the operstate enum, netlink attribute and the
operstate_on_dpll_get callback to the DPLL subsystem. It also
updates Documentation/driver-api/dpll.rst to describe the
separation between admin state and operational state.
Patch 2 implements the callback for ZL3073x input pins using the
reference monitor status register. It also refactors the existing
state_on_dpll_get to return purely administrative state and switches
periodic monitoring to track operstate changes.
====================
Link: https://patch.msgid.link/20260428154907.2820654-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement operstate_on_dpll_get callback for input pins to report
the actual hardware status:
- active: pin is the currently locked reference
- standby: signal is valid but pin is not actively used
- no-signal: reference monitor reports Loss of Signal (LOS)
- qual-failed: reference monitor reports a qualification failure
(SCM, CFM, GST, PFM, eSync or Split-XO)
Separate administrative state (state_on_dpll_get) from operational
state: admin state now reports purely the user-requested intent
(connected in reflock mode, selectable in auto mode).
Switch periodic monitoring to track operstate changes instead of
the mixed admin/oper state that was previously reported.
Add ref_mon_status bit definitions to regs.h.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add pin-operstate enum and operstate_on_dpll_get callback to report
the actual hardware status of a pin with respect to its parent DPLL
device. Unlike pin-state (which reflects administrative intent set
by the user), operstate reflects what the hardware is actually doing.
Defined operational states:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification
The operstate is reported inside the pin-parent-device nested
attribute alongside the existing state and phase-offset attributes.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Maxim MAX25014 is a 4-channel automotive grade backlight driver IC
with integrated boost controller.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260407-max25014-v8-2-14eac7ed673a@gocontroll.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX25014 is a 4-channel automotive grade backlight driver IC
with integrated boost controller.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260407-max25014-v8-1-14eac7ed673a@gocontroll.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some subsystems enable -Wmaybe-uninitialized [1], which can trigger
false positives when KCSAN is enabled. Specifically, passing an
uninitialized variable to functions that instrument accesses (e.g.,
copy_from_user()) results in calls to __kcsan_check_access().
Because __kcsan_check_access() takes a `const volatile void *ptr`, GCC
infers that the function may only read the memory location, and thus
warns if the passed variable is uninitialized.
However, KCSAN is a dynamic analysis tool for data race detection; while
it does read the memory location to detect concurrent modifications, the
"initialized'ness" of the memory location is irrelevant for its analysis.
Use absolute_pointer() in __kcsan_check_write(), kcsan_check_write(),
and kcsan_check_atomic_write() to hide the pointer from the compiler,
preventing it from concluding that the pointer passed points to
uninitialized memory.
This fixes warnings like:
| CC fs/ntfs3/file.o
| In file included from include/asm-generic/rwonce.h:27,
| from arch/arm64/include/asm/rwonce.h:81,
| from include/linux/compiler.h:369,
| from include/linux/array_size.h:5,
| from include/linux/kernel.h:16,
| from include/linux/backing-dev.h:12,
| from fs/ntfs3/file.c:10:
| In function 'instrument_copy_from_user_before',
| inlined from '_inline_copy_from_user' at include/linux/uaccess.h:184:2,
| inlined from 'copy_from_user' at include/linux/uaccess.h:221:9,
| inlined from 'ntfs_ioctl_fitrim' at fs/ntfs3/file.c:77:6,
| inlined from 'ntfs_ioctl' at fs/ntfs3/file.c:164:10:
| include/linux/kcsan-checks.h:220:28: error: 'range' may be used uninitialized [-Werror=maybe-uninitialized]
| 220 | #define kcsan_check_access __kcsan_check_access
| | ^
| include/linux/kcsan-checks.h:311:9: note: in expansion of macro 'kcsan_check_access'
| 311 | kcsan_check_access(ptr, size, KCSAN_ACCESS_WRITE)
| | ^~~~~~~~~~~~~~~~~~
| include/linux/instrumented.h:147:9: note: in expansion of macro 'kcsan_check_write'
| 147 | kcsan_check_write(to, n);
| | ^~~~~~~~~~~~~~~~~
| include/linux/kcsan-checks.h: In function 'ntfs_ioctl':
| include/linux/kcsan-checks.h:37:6: note: by argument 1 of type 'const volatile void *' to '__kcsan_check_access' declared here
| 37 | void __kcsan_check_access(const volatile void *ptr, size_t size, int type);
| | ^~~~~~~~~~~~~~~~~~~~
| fs/ntfs3/file.c:65:29: note: 'range' declared here
| 65 | struct fstrim_range range;
| | ^~~~~
Link: https://lore.kernel.org/all/5da10cca-875b-418d-b54e-6be3ea32c266@app.fastmail.com/ [1]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Boards using this backlight chip do not power the backlight off on
suspend. Enable BL_CORE_SUSPENDRESUME so the chip gets powered off by
the backlight core on suspend.
Tested on samsung,coreprimevelte.
Cc: stable@vger.kernel.org # v6.19
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260328-ktd2801-pm-fix-v1-1-007cb103faeb@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
The Xiaomi Mi Laptop Pro 15 (TM1905, subsystem 1d72:1905) ships with the
Realtek ALC256 codec on Intel Comet Lake PCH-LP. After S3 resume the
codec sets coefficient register 0x10 to 0x0220 instead of 0x0020 — bit 9
is erroneously set, which silences the internal speaker. Bluetooth and
HDMI audio are unaffected because they use different paths.
This is the same mechanism fixed for Clevo NJ51CU by commit edca7cc4b0
("ALSA: hda/realtek: Fix quirk for Clevo NJ51CU"), but the existing
ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME also reconfigures pin 0x19 as a
front mic, which is wrong for this Xiaomi where pin 0x19 default is
0x411111f0 (disabled). Add a minimal fixup that only clears the stuck
coef bit, and add the Xiaomi SSID to the quirk table.
Verified by reading coef 0x10 with hda-verb after resume (returns
0x0220), writing 0x0020, and confirming the internal speaker resumes
output. With this fixup applied the bit is cleared on every codec init,
including post-resume.
Signed-off-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Cc: <stable@vger.kernel.org>
Tested-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Link: https://patch.msgid.link/20260429220903.14918-1-yuriypadlyak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, get_non_dying_memcg_start() and get_non_dying_memcg_end() both
evaluate cgroup_subsys_on_dfl(memory_cgrp_subsys) independently to
determine whether to acquire or release the RCU read lock.
However, the result of cgroup_subsys_on_dfl() can change dynamically at
runtime due to cgroup hierarchy rebinding (e.g., when the memory
controller is moved between cgroup v1 and v2 hierarchies). This can cause
the following warning:
=====================================
WARNING: bad unlock balance detected!
7.0.0-next-20260420+ #83 Tainted: G W
-------------------------------------
memcg-repro/270 is trying to release lock (rcu_read_lock) at:
[<ffffffff815f57f7>] rcu_read_unlock+0x17/0x60
but there are no more locks to release!
other info that might help us debug this:
1 lock held by memcg-repro/270:
#0: ffff888102fa2088 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x285/0x880
stack backtrace:
CPU: 0 UID: 0 PID: 270 Comm: memcg-repro Tainted: G W 7.0.0-next-20260420+ #
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
<TASK>
? rcu_read_unlock+0x17/0x60
dump_stack_lvl+0x77/0xb0
print_unlock_imbalance_bug+0xe0/0xf0
? rcu_read_unlock+0x17/0x60
lock_release+0x21d/0x2a0
rcu_read_unlock+0x1c/0x60
do_pte_missing+0x233/0xb40
__handle_mm_fault+0x80e/0xcd0
handle_mm_fault+0x146/0x310
do_user_addr_fault+0x303/0x880
exc_page_fault+0x9b/0x270
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x5590e4eb41ea
Code: 61 cc 66 0f 6f e0 66 0f 61 c2 66 0f db cd 66 0f 69 e2 66 0f 6f d0 66 0f 69 d4 66 0f 61 0
RSP: 002b:00007ffcad25f030 EFLAGS: 00010202
RAX: 00005590e4eb8010 RBX: 00007ffcad260f7d RCX: 00007f73c474d44d
RDX: 00005590e4eb80a0 RSI: 00005590e4eb503c RDI: 000000000000000f
RBP: 00005590e4eb70a0 R08: 0000000000000000 R09: 00007f73c483a680
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffcad25f180 R14: 00005590e4eb6dd8 R15: 00007f73c4869020
</TASK>
------------[ cut here ]------------
Fix this by explicitly tracking the RCU lock state, ensuring that
rcu_read_unlock() in get_non_dying_memcg_end() is strictly paired with the
lock acquisition, regardless of any runtime rebinding events.
Link: https://lore.kernel.org/20260429073105.44472-1-qi.zheng@linux.dev
Fixes: 8285917d6f ("mm: memcontrol: prepare for reparenting non-hierarchical stats")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DEFER_TASKRUN local task work paths all run under ctx->uring_lock,
which serializes them with each other and with the rest of the ring's
hot paths. io_move_task_work_from_local() is the exception - it's called
from io_ring_exit_work() on a kworker without holding the lock and from
the iopoll cancelation side right after dropping it.
->work_llist is fine with this, as it's only ever updated via the
expected paths. But the ->retry_llist is updated while runing, and hence
it could potentially race between normal task_work running and the
task-has-exited shutdown path.
Simply grab ->uring_lock while moving the local work to the fallback
list for exit purposes, which nicely serializes it across both the
normal additions and the exit prune path.
Cc: stable@vger.kernel.org
Fixes: f46b9cdb22 ("io_uring: limit local tw done")
Reported-by: Robert Femmer <robert.femmer@x41-dsec.de>
Reported-by: Christian Reitter <invd@inhq.net>
Reported-by: Michael Rodler <michael.rodler@x41-dsec.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After calling wmidev_evaluate_method(), if the ACPI core does not return
an out object, then wmidev_invoke_method() bypasses the min_size check
and returns 0. Add a check for min_size if there is not an out object.
Fixes: 1aeded2f55 ("platform/wmi: Extend wmidev_query_block() to reject undersized data")
Closes: https://sashiko.dev/#/patchset/20260406203237.2970-1-W_Armin%40gmx.de
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-invoke-fix-v1-1-ce938eb80cd3@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shengjiu Wang <shengjiu.wang@nxp.com> says:
This patch series addresses several issues in the Freescale Generic ASoC
Sound Card driver related to hardware limitations, DPCM path switching,
and codec-specific constraints.
The fsl-asoc-card driver provides a generic machine driver for i.MX SoCs,
supporting various codecs and optional ASRC (Asynchronous Sample Rate
Converter) for sample rate conversion. During testing several issues were
identified:
1. Missing channel constraint propagation in DPCM mode
2. DPCM path switching causing audio dropouts
3. Hardware channel alignment requirements
4. Clock generation limitations preventing certain audio formats
5. Codec-specific PLL frequency violations
WM8904 has a 27 MHz PLL frequency limit. The current S24_LE PLL ratio
of 384 exceeds this at high sample rates (96 kHz × 384 = 36.864 MHz).
Reduce the ratio to 192 for WM8904, keeping PLL within limits at all
supported rates (96 kHz × 192 = 18.432 MHz).
Add codec-specific pll_ratio_s24 field, default 384, override to 192
for WM8904.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260429100028.2739711-6-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S20_3LE format cannot be used with WM8960/WM8962 codecs when paired
with SAI, due to two distinct BCLK generation limitations:
1. Codec Master Mode:
When WM8960/WM8962 generates BCLK, it cannot produce the exact
1.92 MHz required for S20_3LE at 48kHz stereo (48000 × 2 × 20).
The codec uses fixed dividers from SYSCLK (12.288 MHz), and the
required divider (6.4) is not available. The closest divider is 6,
producing 2.048 MHz, which causes right channel corruption.
2. SAI Master Mode:
SAI derive BCLK from MCLK using integer dividers only. S20_3LE
requires non-integer divider ratios with standard MCLK frequencies.
For example, 48kHz stereo needs 1.920 MHz BCLK, which requires a
divider of 6.4 from 12.288 MHz MCLK (not an integer).
Exclude S20_3LE format for WM8960/WM8962 when used with SAI to prevent
these issues. Users should use S16_LE, S24_LE, or S32_LE instead.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260429100028.2739711-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42888 codec has 4 I2S lanes with 2 channels per lane. Using odd
channel counts (3, 5, 7) causes data misalignment in the I2S frame,
resulting in incorrect channel mapping. Only mono and even channel
counts (1, 2, 4, 6, 8) work correctly.
Additionally, the fixed system clock on i.MX platforms limits supported
sample rates. With 12.288 MHz MCLK, only 48kHz family rates (48k, 96k,
192k) achieve valid MCLK:LRCK ratios. With 11.2896 MHz MCLK, only 44k
family rates are supported.
Add a startup callback to apply PCM constraints for both channels and
rates, preventing userspace from requesting unsupported configurations.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260429100028.2739711-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Problem:
When switching from ASRC path (hw:0,1) to direct path (hw:0,0),
audio stops after 5 seconds due to DAPM powering down shared widgets.
Scenario:
1. Play on hw:0,1 (ASRC): ASRC-Playback → CPU-Playback → Codec
2. Stop playback
3. Play on hw:0,0 (Direct): CPU-Playback → Codec
4. After 5s: No sound (DAPM powered down CPU-Playback)
Root Cause:
DAPM sees ASRC-Playback disconnected and powers down the entire
path including CPU-Playback, even though CPU-Playback is still
needed for the direct path.
Solution:
Enable ignore_pmdown_time for DPCM links to prevent premature
widget power-down when switching between paths.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260429100028.2739711-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using ASRC in DPCM mode, the backend DAI (codec) may have channel
constraints that differ from the frontend. For example, the ASRC can
support 1-8 channels, but the codec might only support stereo (2 channels).
Without dpcm_merged_chan, userspace can open the frontend with unsupported
channel counts, leading to errors when the backend is configured.
Enable dpcm_merged_chan to merge backend channel constraints to the
frontend, ensuring userspace only sees valid channel configurations.
This fixes issues where applications attempt to use channel counts
that the backend codec doesn't support.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260429100028.2739711-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c4494904 ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access.
Reported-by: syzbot+39b2fb0f2638669008ec@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
indx_insert_into_root() promotes a full resident $INDEX_ROOT into
$INDEX_ALLOCATION and copies all non-last resident root entries into
a newly allocated INDEX_BUFFER via hdr_insert_head(). The source
byte count 'to_move' is summed from the on-disk resident entry sizes
and is independent of the destination buffer size, which comes from
root->index_block_size (via indx->index_bits).
A crafted NTFS image that keeps a valid, full resident root but
shrinks root->index_block_size down to 512 after the root has been
populated makes hdr_insert_head() memcpy attacker-controlled resident
entry bytes past the end of the kmalloc(1u << indx->index_bits)
allocation returned by indx_new(). For a 512-byte destination and a
resident root whose non-last entries total 560 bytes, the memcpy
overruns by 120 bytes and a following memmove extends the highest
written offset to 136 bytes past the allocation. The overflow bytes
are a direct copy of on-disk entries (via kmemdup), so they are
fully attacker-controlled.
The write is reachable from unprivileged open(O_CREAT) on a mounted
crafted NTFS image: a single sufficiently long create in a directory
whose resident root is already full forces root promotion and
triggers the copy.
This is a controlled out-of-bounds write of 120-136 bytes past a
kmalloc(index_block_size) allocation, with attacker-controlled
content. It is a bounded adjacent-heap corruption primitive; it is
not an arbitrary-address write. Successful exploitation into a named
victim object depends on the surrounding slab layout.
Reject the copy at the sink. The destination's INDEX_HDR already
reports hdr_total (the payload capacity of the new buffer) and
hdr_used (the bytes already consumed by the terminal END entry
installed by indx_new()); require that to_move fits in the remaining
payload before calling hdr_insert_head(). On mismatch, fail with
-EINVAL and mark the filesystem as having a detected on-disk
inconsistency, which is the same behaviour as the surrounding
validation in this function.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
indx_find_buffer() recursively descends the B+ tree index with no depth
limit. A crafted NTFS image with circular index node references causes
unbounded recursion, overflowing the kernel stack and panicking the
system.
This is reachable by mounting a malicious NTFS filesystem (e.g. from a
USB drive via desktop automount) and deleting a file whose index entry
triggers the rebalancing fallback path in indx_delete_entry().
Add a depth parameter and bail out with -EINVAL when it reaches the
fnd->nodes array bound, matching the constraint already enforced by
fnd_push() in indx_find().
The related function indx_find() was previously patched for a similar
infinite-loop issue (commit 1732053c8a), but indx_find_buffer() was
missed.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption.
Reported-by: Yametsu <yam3tsu@gmail.com>
Fixes: 57557964b5 ("accel/ivpu: Add support for userptr buffer objects")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.19+
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260427070048.18017-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return -EIO if efx_mcdi_rpc() doesn't return enough space.
Fixes: 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/afGpsbLRHL4_H0KS@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch covers in global subprog selftests the new verifier log with
the breakdown of instructions processed by global subprogs. The test
ensures the log line is present and that it has the right number of
subcounts.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/bpf/3a5157f4573edaa8846f6fc4041f715136f693b1.1777538384.git.paul.chaignon@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When using global functions (i.e. subprogs), the verifier performs
function-by-function verification. In that case, the sum of the
instructions processed in each global function and in the main program
counts towards the 1 million instructions limit. Only that sum is
reported in the verifier logs.
While starting to use global functions in Cilium (finally!), we found it
can be useful to have the breakdown per global function, to understand
exactly where the budget is currently spent. This patch implements this
breakdown, under BPF_LOG_STATS, as done for the stack depths.
When iterating over subprogs, we need to skip the hidden subprogs at the
end because they don't have a corresponding func_info_aux entry and
calling bpf_subprog_is_global() would result in an OOB access.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/bpf/5590f9c67e614ec9054d0c7e74e87cc690a52c56.1777538384.git.paul.chaignon@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
As I will be departing from my current position, I will
no longer maintain the driver, and remove myself from
ivpu's maintainers entry. Andrzej will support Karol
in maintaining the driver.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260429083958.2148777-1-maciej.falkowski@linux.intel.com
When support for multiple EINT base addresses was added in commit
3ef9f710ef ("pinctrl: mediatek: Add EINT support for multiple
addresses"), mtk_eint_chip_write_mask() was changed to write interrupt
masks for all base addresses in one call. However the "base" parameter
was left around and now causes sparse warnings:
mtk-eint.c:428:44: warning: incorrect type in argument 2 (different address spaces)
mtk-eint.c:428:44: expected void [noderef] __iomem *base
mtk-eint.c:428:44: got void [noderef] __iomem **base
mtk-eint.c:436:44: warning: incorrect type in argument 2 (different address spaces)
mtk-eint.c:436:44: expected void [noderef] __iomem *base
mtk-eint.c:436:44: got void [noderef] __iomem **base
Since the "base" parameter is no longer needed, just drop it.
Fixes: 3ef9f710ef ("pinctrl: mediatek: Add EINT support for multiple addresses")
Cc: Hao Chang <ot_chhao.chang@mediatek.com>
Cc: Qingliang Li <qingliang.li@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies.
Switch to unified "Qualcomm" so it will be easier for users to identify the
options when for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260427070121.18422-2-krzysztof.kozlowski@oss.qualcomm.com
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a macro that
only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead.
Standardize now on the __ASSEMBLER__ macro that is provided by the
compilers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260421113012.146528-1-thuth@redhat.com
Add irq_set_type() callback to support configuring interrupt trigger types
(level high/low, edge rising/falling) for the JHB100 interrupt controller.
Also add irq_ack() callback as required by handle_edge_irq().
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-6-changhuang.liang@starfivetech.com
StarFive JHB100 SoC interrupt controller actually supports 64 interrupt
sources, the original code only supported up to 32. now it is extended to 64.
Also use guard(raw_spinlock) to automatically release spinlocks.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-5-changhuang.liang@starfivetech.com
Use devm_ interfaces to simplify resource release. Make clock and reset get
optional as they are not used on the JHB100 SoC. Replace pr_ logging with
dev_* logging. Use __free(kfree) cleanup attribute to auto-free irqc on
error paths
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-4-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP. Rename the
driver file, Kconfig symbol, and internal references from "jh8100" to
"jhb100" to accurately reflect the supported hardware.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-3-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP.
Rename the binding file, compatible string, and MAINTAINERS entry from
"jh8100" to "jhb100". In JHB100 SoC, The clocks and resets are not operated
by users, but they exist in the hardware. Mark them as optional.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260416064751.632138-2-changhuang.liang@starfivetech.com
The existing AST2700 interrupt controller driver ("aspeed,ast2700-intc-ic")
was written against the A0 pre-production design.
From A1 onwards (retained in the A2 production silicon), the interrupt
fabric was re-architected: interrupt routing is programmable and interrupt
outputs can be directed to multiple upstream controllers (PSP GIC,
Secondary Service Processor (SSP) NVIC, Tertiary Service Processor (TSP)
NVIC, and Boot MCU interrupt controller). This design requires route
resolution and a controller hierarchy model which the A0 driver cannot
represent.
Remove driver support for A0 in favour of the driver for the A2 production
design.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-4-c0b0a300a057@aspeedtech.com
Add a KUnit suite for aspeed_intc0_resolve_route().
Cover invalid arguments, invalid domain/range data, connected and
disconnected mappings, and malformed upstream range cases.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-3-c0b0a300a057@aspeedtech.com
The AST2700 interrupt fabric is shared by multiple integrated processors
(PSP/SSP/TSP/BootMCU), each with its own interrupt controller and its own
devicetree view of the system. As a result, interrupt routing cannot be
treated as fixed: the valid route for a peripheral interrupt depends on
which processor is consuming it.
The INTC0 driver models this by creating a hierarchical irqdomain under
the upstream interrupt controller selected by the interrupt-parent
property in the devicetree. Information derived from this relationship
is incorporated into the route resolution logic for the controller.
The INTC1 driver implements the banked INTM-fed controller and forwards
interrupts toward INTC0, without embedding assumptions about the final
destination processor.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-2-c0b0a300a057@aspeedtech.com
Introduce a new binding describing the AST2700 interrupt controller
architecture implemented in the A2 production silicon.
The AST2700 SoC has undergone multiple silicon revisions (A0, A1, A2)
prior to mass production. The interrupt architecture was substantially
reworked after the A0 revision for A1, and the A1 design is retained
unchanged in the A2 production silicon.
The existing AST2700 interrupt controller binding ("aspeed,ast2700-intc-ic")
was written against the pre-production A0 design.
That binding does not accurately describe the interrupt hierarchy and
routing model present in A1/A2, where interrupts can be routed to multiple
processor-local interrupt controllers (Primary Service Processor (PSP) GIC,
Secondary Service Processor (SSP)/Tertiary Service Processor (TSP) NVICs,
and BootMCU APLIC) depending on the execution context.
Remove the binding for the pre-production A0 design in favour of the
binding for the A2 production design. There is no significant user
impact from the removal as there are no existing devicetrees in any
of Linux, u-boot or Zephyr that make use of the A0 binding.
Hardware connectivity between interrupt controllers is expressed using
the aspeed,interrupt-ranges property.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-1-c0b0a300a057@aspeedtech.com
A mbox rx channel is requested using mbox_request_channel_byname() in
probe. In remove callback, the rx mailbox channel is cleaned up when the
rx_chan is NULL due to incorrect condition check. The mailbox channel is
not shutdown and it can receive messages even after the device removal.
This leads to use after free. Also the channel resources are not freed.
Fix this by checking the rx_chan correctly.
Fixes: ffdbae28d9 ("drivers: soc: xilinx: Use mailbox IPI callback")
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260320060445.1541017-1-ptsm@linux.microsoft.com
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events.
Fixes: fcf544ac64 ("soc: xilinx: Add cb event for subsystem restart")
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260320060306.1540928-1-ptsm@linux.microsoft.com
On DesignWare I3C controllers where IC_HAS_IBI_DATA=0 (such as versalnet),
the IBI_STS_CNT field (bits [28:24] of QUEUE_STATUS_LEVEL) is hardwired
to 0. The IBI status entry count is instead reported via IBI_BUF_BLR
(bits [23:16] of the same register).
irq_handle_ibis() was unconditionally reading IBI_STS_CNT, causing it to
always see 0 pending IBIs on versalnet and return early without draining
the IBI buffer. Since INTR_IBI_THLD_STAT is level-triggered against the
buffer fill level, this left the interrupt permanently asserted.
Detect IBI data capability at probe time by writing the IBI data threshold
field in QUEUE_THLD_CTRL and reading it back. Use the result to select the
correct register field in irq_handle_ibis().
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260401084430.436059-1-shubhrajyoti.datta@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace mutex_init()/mutex_destroy() with drmm_mutex_init() for the
VRAM manager lock. This leverages DRM managed infrastructure to
automatically destroy the mutex during device teardown, eliminating
manual mutex_destroy() calls in both the normal fini path and the
gpu_buddy_init() error path.
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260429093138.3899280-2-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Replace sprintf() function calls with sysfs_emit() and
sysfs_emit_at() function calls where appropriate. This will help
harden the driver and help modernize it. While at it, add missing
newlines at the end of some sysfs_emit() (formerly sprintf()) calls.
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260421214837.20939-1-m32285159@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260413005040.1211107-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
