The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a wrong upper limit check for the domain value when an EP11
CPRB is processed for sending to a crypto card. This check is only
active on custom device nodes but may lead to access heap memory
behind perms->adm when an administrative CPRB is sent.
Add correct limit (AP_DOMAINS = 256) checking to fix this.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Cc: stable@vger.kernel.org
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.4+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a machine without PCI memory-I/O (MIO) support or when running with
pci=nomio the s390 specific PCI MMIO write syscall checks if the MMIO
cookie is above ZPCI_IOMAP_ADDR_BASE as a sanity check before even
trying to perform the MMIO. If this check fails the return value was
left unchanged and thus 0 from prior operations falsely indicating
success. This could potentially confuse user-space into falsely
believing the MMIO, on a mapping not valid for MMIO was successful.
Fix this by setting the return value to -EFAULT prior to the check
following the same pattern as elsewhere in the same function.
Cc: stable@vger.kernel.org
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Fixes: a67a88b0b8 ("s390/pci: remove races against pte updates")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
iomap_split_ioend can split bios that already come from
iomap_ioend_bioset and thus deadlock when the bioset is exhausted.
Add a separate bio_set to avoid this deadlock.
Christian Brauner <brauner@kernel.org> says:
Mark iomap_ioend_split_bioset static as it is only used in ioend.c,
fixing the sparse warning reported by the kernel test robot.
Fixes: 5fcbd555d4 ("iomap: split bios to zone append limits in the submission handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260629125229.3400726-1-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return.
Fixes: dd1a756778 ("uprobes: SRCU-protect uretprobe lifetime (with timeout)")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260729-uprobe-v1-1-61896b87c867@debian.org
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes.
Fixes: f5a544e3ba ("ksmbd: add support for SMB3 multichannel")
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Reported-by: Samu <nomomentomori@gmail.com>
Suggested-by: Samu <nomomentomori@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table.
Fixes: 8510a043d3 ("ksmbd: increment reference count of parent fp")
Reported-by: Yunseong Kim <yunseong.kim@est.tech>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCamu3EAAKCRCFwuHvBreF
YfibAP9Pv3SmmvPvbJjnUo7Vfu8Ra8uLOkK7CGFJFnqvYFnZ5gD/Xd0leOM0nk7B
/2Zvv1byPIONmNUjJP5GHRt/FiK9mAw=
=74z6
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
-----BEGIN PGP SIGNATURE-----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=oqQe
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
- Fix potential integer overflows in audit_log_n_string()
Similar to the earlier fix to audit_log_n_hex() that you merged
earlier in July. Expect a cleaner, and generally better fix for these
functions in an upcoming merge window, but this addresses the problem
in a small patch that should be easy for people to backport.
- Fix potential use-after-free in audit_del_rule()
* tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential use-after-free in audit_del_rule()
audit: fix potential integer overflow in audit_log_n_string()
Per-task restrictions apply to all rings created by a task. Once
installed, they should not be dropped across exec.
For a task that has used io_uring, the exec cancellation path calls
__io_uring_free(). This frees both the task context and the per-task
restriction, so a ring created after exec is unrestricted.
Split task context cleanup into io_uring_free_tctx(), and use it from
the exec cancellation path. Keep __io_uring_free() for final task
cleanup, where both the context and restriction are released.
Fixes: ed82f35b92 ("io_uring: allow registration of per-task restrictions")
Cc: stable@vger.kernel.org # 7.1+
Signed-off-by: Kyumin Lee <fyonglkm@gmail.com>
Link: https://patch.msgid.link/20260730192734.459247-1-fyonglkm@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
HDMI 2.0 section 6.1.3.1 specifies that after enabling
Scrambling_Enable and starting scrambled video transmission, the source
should poll Scrambling_Status until it reads 1 or until a timeout of
200 ms expires.
Add a polling step after enabling the HDMI port to check the scrambling
status when HDMI scrambling is enabled.
On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz
(594 MHz) failing to come up correctly because the sink has not yet
finished its scrambling setup. In practice, waiting for the scrambling
status here fixes such sinks.
While this synchronous polling is not itself explicitly required for
correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it
as the way for the source to verify that the TMDS link is functioning
correctly with scrambling enabled.
v3:
- Add explicit HDMI 2.0 section reference in code comment
- Clarify commit message around the observed sink fix
v2:
- Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed
delay
Reported-by: Jerome Tollet <jtollet@cisco.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868
Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20260520022544.3097252-1-ankit.k.nautiyal@intel.com
(cherry picked from commit b7d51d65e4)
Fixes: 1595363788 ("drm/i915: enable scrambling")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
import_zcrx() attaches an existing ifq to another ring. It never calls
zcrx_set_ring_ctx() and so never takes the ->master_ctx reference, but
its error path still passes @ctx to zcrx_unregister(), which clears
->master_ctx and drops its percpu_ref whenever ifq->master_ctx == ctx.
That condition is reachable. A ring that registers an ifq with a
non-zero event type_mask gets ->master_ctx pointed at itself, and
nothing stops it from exporting that ifq with ZCRX_CTRL_EXPORT and
importing the resulting fd back into the same ring. Failing the import
after the refcount bumps -- an argument page mapped PROT_READ makes the
copy_to_user() in import_zcrx() return -EFAULT -- then clears the
->master_ctx owned by the original registration, which is still live.
Refcounts stay balanced and nothing is freed early, so there is no
splat. The ring silently stops receiving ZCRX_EVENT_ALLOC_FAIL and
ZCRX_EVENT_COPY: zcrx_send_notif() returns early on a NULL
->master_ctx, and ->master_ctx is only ever set on a freshly allocated
ifq, so it cannot be restored without tearing the ring down.
Pass NULL instead, matching zcrx_box_release() and the zcrx_export()
error path. io_register_zcrx() only gets away with passing @ctx
because zcrx_set_ring_ctx() runs after its last goto err.
Fixes: 00d9148127 ("io_uring/zcrx: share an ifq between rings")
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Link: https://patch.msgid.link/20260730162741.1125-1-worapat.kd2@gmail.com
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: add pavel edit]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Allow fast frequency switching in the ACPI CPPC library only when
every supported control used by the driver callback has an address
space already accepted for fast access (Christian Loehle)
- Skip writes to unsupported performance controls in the ACPI CPPC
library (Christian Loehle)
- Update cppc_cpufreq_update_perf_limits() to read policy->min and
policy->max once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum, along the lines of
cpufreq_driver_resolve_freq() (Christian Loehle)
- Fix a possible memory leak in the powernowk8_cpu_init() error
paths (Abdun Nihaal)
- Loosen the requirement on lowest nonlinear frequency != min freq in
the amd-pstate driver that is too tight for new systems some of
which actually have the lowest nonlinear frequency identical to the
minimum frequency (Mario Limonciello)
- Prevent amd-pstate from loading on unsupported hardware (Rong Zhang)
- Address an initialization race in the schedutil governor when it
runs on multi-CPU cpufreq policies, by making it initialize all
per-CPU structures first and only then publish the per-CPU
utilization update hooks (Zhongqiu Han)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmprmRgSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1Ro0H/3llnBhbu9nq7QcFmlPqcRh2yqWozPoG
oJTYEc/FEvPTEy65b6YxPFm64heiVTpv2gSZk0NVLnsXmDc3qNfoVFN7BvY8soPV
X4hEZbVi/ZE84l2gmc3t9HjK+j9mxfyWiWj/QDqZvZzf3v0QN8Klo9SvzlwXlnXX
1KdBpPPZYv7H0xIIOiL7K17JbvVTAXIwsV2SidOkm+29xArMYnHnzxqaIoh70kx7
vvRLR0NwubHzPZt66L5TFQCwixa+O71YaQ2l1k6TOzZ5G2BEtriXjAaimAd88iAu
Ogpie91bcERZdmoBIGtBCg9jSrHIqJE8ItugBsZw21BnIBsAKpgpJgw=
=U/2b
-----END PGP SIGNATURE-----
Merge tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues related to cpufreq, in the ACPI CPPC library and the
generic CPPC cpufreq driver, in the powernow-k8 and amd-pstate
drivers, and in the schedutil governor:
- Allow fast frequency switching in the ACPI CPPC library only when
every supported control used by the driver callback has an address
space already accepted for fast access (Christian Loehle)
- Skip writes to unsupported performance controls in the ACPI CPPC
library (Christian Loehle)
- Update cppc_cpufreq_update_perf_limits() to read policy->min and
policy->max once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum, along the lines of
cpufreq_driver_resolve_freq() (Christian Loehle)
- Fix a possible memory leak in the powernowk8_cpu_init() error paths
(Abdun Nihaal)
- Loosen the requirement on lowest nonlinear frequency != min freq in
the amd-pstate driver that is too tight for new systems some of
which actually have the lowest nonlinear frequency identical to the
minimum frequency (Mario Limonciello)
- Prevent amd-pstate from loading on unsupported hardware (Rong
Zhang)
- Address an initialization race in the schedutil governor when it
runs on multi-CPU cpufreq policies, by making it initialize all
per-CPU structures first and only then publish the per-CPU
utilization update hooks (Zhongqiu Han)"
* tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: powernow-k8: Fix possible memory leak in powernowk8_cpu_init()
ACPI: CPPC: Skip writes to unsupported performance controls
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
cpufreq: schedutil: Publish util hooks only after all sg_cpu are initialized
cpufreq: cppc: Sanitize lockless policy limit snapshots
ACPI: CPPC: Check all controls for fast switching
Turns out that my naive assumption that surely nobody is using io_uring
to manage nested epoll instances was wrong - libuv is in fact doing that
very thing. Since we have users in the wild using that feature, we
cannot remove it from upstream. Revert the commit that introduced that
limitation.
This reverts commit cfa1539b24.
Link: https://lore.kernel.org/io-uring/605939add4dfb674bd7ab39ef8dbd3fd22e754e4.camel@xry111.site/
Reported-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_ring_buffers_peek() builds an iovec array from provided buffers, and
that in turn can be handed off to a lower level provider. Be prudent and
cap the total size to MAX_RW_COUNT, which is the Linux default for how
much IO do to in a single call.
No bugs here, but it's a good preventative measure to avoid truncation
issues.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit:
6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
changed how io_mshot_prep_retry() set sr->len, and added the same
initialization in io_mshot_prep_retry(). But it neglected to touch the
send path, which may also uses the mshot retry path. Ensure that
sr->mshot_len always gets initialized correctly.
Fixes: 6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
Cc: stable@vger.kernel.org
Reported-by: Sung Keum <kambodi127@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- eth: tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is present
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth: veth: convert frag_list skbs before running XDP
- eth: ice: wait for reset completion in ice_resume()
- eth: igc: remove napi_synchronize() in igc_down()
- eth: vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- eth: idpf: bound interrupt-vector register fill to the allocated array
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jLD8
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
-----BEGIN PGP SIGNATURE-----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=0jhj
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in
gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
* tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pch: use raw_spinlock_t for the register lock
gpio: pca953x: fix cache_only and IRQ state on restore_context() failure
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
gpiolib: tolerate gpio-hogs lacking a hogging state
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
- Ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970 platform
- Fix exit_flags field placement in pt_regs for ptrace
- Fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Demote myself to reviewer
- misc fixes and cleanup
Thanks to:
Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira Rajeev, Christophe
Leroy (CS GROUP), Dmitry V. Levin, Geert Uytterhoeven, John Ogness, Michael
Ellerman, Mukesh Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Thorsten Blum,
Vaibhav Jain
-----BEGIN PGP SIGNATURE-----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=On4C
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970
platform
- fix exit_flags field placement in pt_regs for ptrace
- fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Michael Ellerman demotes himself to reviewer
- misc fixes and cleanup
Thanks to Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira
Rajeev, Christophe Leroy (CS GROUP), Dmitry V. Levin, Geert
Uytterhoeven, John Ogness, Michael Ellerman, Mukesh Kumar Chaurasiya
(IBM), Ritesh Harjani (IBM), Thorsten Blum, and Vaibhav Jain
* tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: Demote myself to reviewer
powerpc/serial: Fix include guard comment
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
powerpc/ps3: Remove unused struct table in setup_areas()
powerpc/boot: Fix treeboot-akebono CPU node lookup check
powerpc/boot: Fix treeboot-currituck CPU node lookup check
powerpc/boot: Fix simpleboot CPU node lookup check
powerpc: Fix exit_flags field placement in pt_regs for ptrace
powerpc/970: fix nap return address corruption on async interrupt exit
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a294 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrew Lunn <andrew+netdev@lunn.ch>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCamnRyhMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SS00A/Rpm6GVkF0ievxaEWz5no+Vojn2U/S7K
3ix+pFFfrnyTAP9CfWhg8aIkLOF19RXhKRRLDIm5vI8qKCqrqBkSZszJCw==
=Qoox
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
linux-can-fixes-for-7.2-20260729
* tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ems_usb: validate CPC message lengths
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
can: softing: fw_parse(): validate firmware record spans
can: rcar_canfd: change the initializing flow for clocks and resets
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
can: peak_usb: validate uCAN receive record lengths
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
can: peak_usb: add bounds check for USB channel index
can: ctucanfd: add missing MODULE_DEVICE_TABLE()
can: ctucanfd: use self-test mode for PRESUME_ACK
can: ctucanfd: handle bus error interrupts
can: ctucanfd: mark error-active controller status valid
can: ctucanfd: unmap BAR0 using base address
can: isotp: check register_netdevice_notifier() error in module init
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
====================
Link: https://patch.msgid.link/20260729102802.505168-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
haibo.chen@oss.nxp.com <haibo.chen@oss.nxp.com> says:
Patch 1 introduce per-SoC clock rate limits for both SDR and DTR modes
by adding max_sdr_rate and max_dtr_rate to nxp_fspi_devtype_data.
Patch 2 enter stop mode before reconfiguring MCR0 and DLL to follow
FlexSPI reference manual initialization sequence
Patch 3 propagate clock reconfig failures in nxp_fspi_select_mem()
Link: https://patch.msgid.link/20260728-fspi-clock-v2-0-dbe786a4a6eb@nxp.com
nxp_fspi_select_mem() disables the FlexSPI clocks before calling
clk_set_rate() and re-enabling them. If clk_set_rate() or the clock
re-enable fails, the function returned early (as void) leaving both the
serial root clock and the register interface clock disabled.
As the function returned void, nxp_fspi_exec_op() had no way to know
about the failure and continued to access FlexSPI registers (LUT setup,
data transfer, AHB buffer invalidation). Accessing the controller
registers while its clock is gated off results in a synchronous external
abort.
Make nxp_fspi_select_mem() return an error code and have
nxp_fspi_exec_op() bail out on failure before any further register
access, including nxp_fspi_invalid().
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-3-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC])
and the DLL control registers (DLLxCR) are reconfigured while the
FlexSPI module is still enabled. According to the FlexSPI reference
manual initialization sequence, MCR0 and the DLL control registers
should be programmed while the module is in stop mode, i.e. with
MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0)
afterwards.
Wrap the RX sample clock source selection and the DLL calibration/
override reconfiguration in a stop-mode window to align with the RM
and avoid reconfiguring timing-critical registers while the module is
active.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-2-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for
different sample clock source selection") introduced a global 166MHz
cap for DTR mode (RXCLKSRC=3), based on the i.MX8MN datasheet timing
specification (Section 3.9.9, page 65).
After reviewing the FlexSPI timing parameters in the datasheets for all
supported SoCs, the following corrections and additions are needed:
1. SDR mode (RXCLKSRC=0) limits vary per SoC:
- i.MX8MN/MM/MP/95: 66MHz (IMX8MNCEC §3.9.9, IMX8MMCEC §3.9.10,
IMX8MPCEC, IMX95CEC Rev.8 §4.11.7)
- i.MX8QXP/QM/DXL/ULP: 60MHz (IMX8QXPCEC, IMX8QMCEC, IMX8DXLCEC,
IMX8ULPCEC §7.3.1 ND mode)
- LX2160A: 100MHz (LX2160ACEC FlexSPI timing parameters)
2. DTR mode (RXCLKSRC=3) limits vary per SoC:
- i.MX8MN/MM/MP/ULP: 166MHz
- i.MX8QXP/QM/DXL: 200MHz (same FlexSPI IP across this family)
- i.MX95: 200MHz (IMX95CEC §4.11.7.3.2.3 Table 106)
- LX2160A: DTR disabled (FSPI_QUIRK_DISABLE_DTR)
Update related platform data with correct speed limation according
to datasheet.
Fixes: f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-1-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmprOjEACgkQJNaLcl1U
h9AJeAgAhXykup5iskMuGCmHG3DxDZpHQOxcmvy6x4Afrn39yBVWD1CSkhSWRxHn
IT2GDOMQeHtZE0inMjQ66BX4EUsHg9jZTrvDPEjbscGrLNJdOsrfz1L+e1CTecyG
BgdDsfZFXrjDA/pSa3GtwvbH3YalGZLlmW4lk5PPWGwf7SjkqGj+Xea7kVu1uZrf
nnTC9Sso8siSE+dWapST+yRw6KYwhJndf33ruhjX1OkBfsEM/iDn/gpgJ550G/Xl
ffN12LIB8bDeEuW6svKvQ7OdGUIQds1OfhGngDaNKmMSEqUWGZP0VfxT1s6N8TTQ
5SWz3zAwXUpxkzUYXGQWgUOpkC3CUw==
=u8gI
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF can be triggered
with a custom application using uAPI:
BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653)
Read of size 8 at addr ffff88810d152650 by task meter/2508
Call Trace:
ovs_meter_execute (net/openvswitch/meter.c:653)
do_execute_actions (net/openvswitch/actions.c:1407)
ovs_execute_actions (net/openvswitch/actions.c:1584)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:703)
...
netlink_sendmsg (af_netlink.c:1900)
Allocated by task 2519:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
ovs_meter_cmd_set (net/openvswitch/meter.c:422)
...
netlink_sendmsg (af_netlink.c:1900)
Freed by task 2519:
kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720)
ovs_meter_cmd_set (net/openvswitch/meter.c:479)
...
netlink_sendmsg (af_netlink.c:1900)
Fix that by making sure attach_meter() doesn't make the meter visible
until all the checks are done and the function can't fail anymore.
This also makes sure the "hash" value is calculated after the potential
re-sizing of the table.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642.
Fixes: c7c4c44c9a ("net: openvswitch: expand the meters supported number")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260727121022.198461-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 14a8570564 ("sched/deadline: Use revised wakeup rule for
dl_server") applies the revised wakeup rule to any server, as a result
servers that are not running (dl_defer_running == 0) and start with a
deadline overflow get enqueued and can boost tasks as if they were
running, invalidating the defer rule and the documented state model.
Apply the revised wakeup rule only for deferrable servers that are
marked as running.
Fixes: 14a8570564 ("sched/deadline: Use revised wakeup rule for dl_server")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi <arighi@nvidia.com>
Link: https://patch.msgid.link/20260522125833.264145-1-gmonaco@redhat.com
During link down event, we were doing netif_tx_stop_all_queues() first
and then netif_carrier_off(). This can cause a potential race since
carrier is still on during down event. This patch reverse the calling
order to fix the issue.
Fixes: 50fe6c02e5 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724072831.2415281-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TX VLAN hardware offload is disabled, VLAN tags are embedded in
the packet payload (software VLAN). Previously, the driver failed to
set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission.
This missing flag caused the txgbe FDIR ATR logic to fall through to the
default hash calculation path. This resulted in asymmetric hash values
for Tx and Rx flows, preventing return packets from being steered to the
same queue as the transmit packets.
Fix this by detecting software VLANs via eth_type_vlan(skb->protocol)
and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects
the correct hashing algorithm to maintain Tx/Rx queue symmetry.
Fixes: b501d261a5 ("net: txgbe: add FDIR ATR support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0879DA38A8E32701+20260724074657.10773-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: use devm_mutex_init
This series fixes mutex teardown in the Realtek DSA drivers.
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() must be called before
the mutex is discarded. Using devm_mutex_init() lets the driver core
handle that automatically.
The changes are split into individual commits based on the feature that
introduced each lock to allow proper backports to stable trees.
====================
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-0-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 336e3e4a1a ("net: dsa: realtek: rtl8365mb: add FDB support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-4-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 9da2c8672f ("net: dsa: realtek: rtl8365mb: add VLAN support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-3-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 907e772f6f ("net: dsa: realtek: allow subdrivers to externally lock regmap")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-2-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-1-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260727060348.1887464-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on
any failure. The caller, mana_add_rx_queues(), cannot tell what went
wrong and hardcodes the error as -ENOMEM. As a result the actual failure
reported by the lower layers (for example -EPROTO from a failed HW
request) is masked and every RX queue creation failure looks like an
out-of-memory error.
Return an ERR_PTR() encoded error code from mana_create_rxq() on failure
instead of NULL. The caller now propagates the returned error code
directly instead of substituting -ENOMEM.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
net: openvswitch: fix skb leak on flow key update failure
Fixes for two issues reported by Sashiko while reviewing other patches.
The root cause is the same, fixes and the Fixes are slightly different,
so two separate patches.
====================
Link: https://patch.msgid.link/20260727181851.306076-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
