The QCS6490 Rb3Gen2 has a Renesas μPD720201 XHCI controller hanging off
the TC9563 PCIe switch, on this a Genesys Logic GL3590 USB hub provides
two USB Type-A ports and an ASIX AX88179 USB 3.0 Gigabit Ethernet
interface.
The Renesas chip is powered by two regulators controlled through PM7250B
GPIOs 1 and 4, and the power/reset pin is pulled down by PM8350C GPIO 4.
The Genesys chip power is always-on, but the reset pin is controlled
through TLMM GPIO 162.
Describe the Renesas chip on the PCIe bus, with supplies and reset, to
allow it to be brought out of reset and discovered. Then describe the
two peers of the USB hub, with its reset GPIO, to allow this to be
brought out of reset.
The USB Type-A connectors are not described, as they are in no regard
controlled by the operating system.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323-rb3gen2-upd-gl3590-v2-1-073514bf9ed5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Historically, the Qualcomm PCIe controller node (Host bridge) described
all Root Port properties, such as PHY, PERST#, and WAKE#. But to provide
a more accurate hardware description and to support future multi-Root Port
controllers, these properties were moved to the Root Port node in the
devicetree bindings.
Commit 960609b22b ("arm64: dts: qcom: hamoa: Move PHY, PERST, and Wake
GPIOs to PCIe port nodes and add port Nodes for all PCIe ports")
initiated this transition for the Hamoa platform by moving the PHY
property to the Root Port node in hamoa.dtsi. However, it only updated
some platform specific DTS files for PERST# and WAKE#, leaving others in
a "mixed" binding state.
While the PCIe controller driver supports both legacy and Root Port
bindings, It cannot correctly handle a mix of both. In these cases, the
driver parses the PHY from the Root Port node, but fails to find the
PERST# property (which it then assumes is not present, as it is optional).
Consequently, the controller probe succeeds, but PERST# remains
uncontrolled, preventing PCIe endpoints from functioning.
So, fix the incomplete migration by moving the PERST# and WAKE# properties
from the controller node to the Root Port node in all remaining Hamoa
platform DTS files.
Fixes: 960609b22b ("arm64: dts: qcom: hamoa: Move PHY, PERST, and Wake GPIOs to PCIe port nodes and add port Nodes for all PCIe ports")
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330020934.3501247-1-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
xe_device_declare_wedged() runs in the DMA-fence signaling path, where
GFP_KERNEL memory allocations are not allowed. However, registering
xe_device_wedged_fini via drmm_add_action_or_reset() triggers a
GFP_KERNEL allocation.
Fix this by deferring the registration of xe_device_wedged_fini until
late in the driver load sequence. Additionally, drop the wedged PM
reference only if the device is actually wedged in
xe_device_wedged_fini.
Fixes: 452bca0edb ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260326210116.202585-2-matthew.brost@intel.com
(cherry picked from commit b08ceb4438)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When an SVM is closed, the garbage collector work item must be stopped
synchronously and any future queuing must be prevented. Replace
flush_work() with disable_work_sync() to ensure both conditions are
met.
Fixes: 63f6e480d1 ("drm/xe: Add SVM garbage collector")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260227015225.3081787-1-matthew.brost@intel.com
(cherry picked from commit 2247feb9ba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On PTL, older GSC FWs have a bug that can cause them to crash during
PXP invalidation events, which leads to a complete loss of power
management on the media GT. Therefore, we can't use PXP on FWs that
have this bug, which was fixed in PTL GSC build 1396.
Fixes: b1dcec9bd8 ("drm/xe/ptl: Enable PXP for PTL")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-10-daniele.ceraolospurio@intel.com
(cherry picked from commit 6eb04caaa9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
Fixes: ccd3c6820a ("drm/xe/pxp: Decouple queue addition from PXP start")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-9-daniele.ceraolospurio@intel.com
(cherry picked from commit 0850ec7bb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The default case of the PXP suspend switch is incorrectly exiting
without releasing the lock. However, this case is impossible to hit
because we're switching on an enum and all the valid enum values have
their own cases. Therefore, we can just get rid of the default case
and rely on the compiler to warn us if a new enum value is added and
we forget to add it to the switch.
Fixes: 51462211f4 ("drm/xe/pxp: add PXP PM support")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-8-daniele.ceraolospurio@intel.com
(cherry picked from commit f1b5a77fc9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the PXP HW termination fails during PXP start, the normal completion
code won't be called, so the termination will remain uncomplete. To avoid
unnecessary waits, mark the termination as completed from the error path.
Note that we already do this if the termination fails when handling a
termination irq from the HW.
Fixes: f8caa80154 ("drm/xe/pxp: Add PXP queue tracking and session start")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patch.msgid.link/20260324153718.3155504-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 5d9e708d2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace passes canonical (sign-extended) GPU addresses where bits 63:48
mirror bit 47. The internal GPUVM uses non-canonical form (upper bits
zeroed), so passing raw canonical addresses into GPUVM lookups causes
mismatches for addresses above 128TiB.
Strip the sign extension with xe_device_uncanonicalize_addr() at the
top of xe_vm_madvise_ioctl(). Non-canonical addresses are unaffected.
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260326130843.3545241-13-arvind.yadav@intel.com
(cherry picked from commit 05c8b1cdc5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The page fault handler should reject write/atomic access to read only
VMAs. Add code to handle this in xe_pagefault_service after the VMA
lookup.
v2:
- Apply max line length (Matthew)
Fixes: fb544b8445 ("drm/xe: Implement xe_pagefault_queue_work")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260324152935.72444-7-jonathan.cavitt@intel.com
(cherry picked from commit 714ee6754a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When stm32_ospi_dma_setup() fails, the DMA channels allocated by
stm32_ospi_get_resources() were never released. Add proper cleanup
in the error path.
Fixes: e35a7607e0 ("spi: stm32-ospi: Set DMA maxburst dynamically")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-stm32-ospi-v1-2-142122466412@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When spi_register_controller() fails after reset_control_acquire()
succeeds, the reset control is never released. This causes a resource
leak in the error path.
Add the missing reset_control_release() call in the error path.
Fixes: cf2c3eceb7 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-stm32-ospi-v1-1-142122466412@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, __device_set_driver_override() handles clearing the override
via empty string ("") and newline ("\n") in two separate paths. The "\n"
case also performs an unnecessary memory allocation and immediate free.
Simplify the logic by initializing 'new' to NULL and only allocating
memory if the string length remains non-zero after stripping the
trailing newline.
Reduce code size, improve readability, and avoid unnecessary memory
operations.
No functional change intended.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/driver-core/DGS82WWLXPJ0.2EH4VJSF30UR5@kernel.org/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260325090905.169000-1-hanguidong02@gmail.com
[ Narrow cp's scope to the newline handling block; use scoped_guard().
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The remove() callback returned early if pm_runtime_resume_and_get()
failed, skipping the cleanup of spi controller and other resources.
Remove the early return so cleanup completes regardless of PM resume
result.
Fixes: 79b8a705e2 ("spi: stm32: Add OSPI driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260329-ospi-v1-1-cc8cf1c82c4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The load_segments() function changes segment registers, invalidating GS base
(which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any
subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins
crashing the kernel in an endless loop.
To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented
kernel:
$ kexec -l /boot/otherKernel
$ kexec -e
The real-world context for this problem is enabling crash dump collection in
syzkaller. For this, the tool loads a panic kernel before fuzzing and then
calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC
and CONFIG_KCOV to be enabled simultaneously.
Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc())
is also undesirable as it would introduce an extra performance overhead.
Disabling instrumentation for the individual functions would be too fragile,
so disable KCOV instrumentation for the entire machine_kexec_64.c and
physaddr.c. If coverage-guided fuzzing ever needs these components in the
future, other approaches should be considered.
The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported
there.
[ bp: Space out comment for better readability. ]
Fixes: 0d345996e4 ("x86/kernel: increase kcov coverage under arch/x86/kernel folder")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325154825.551191-1-nogikh@google.com
The AVERAGE_POWER primitive and RAPL_PRIMITIVE_DERIVED flag are not
used anywhere in the code.
Remove them to simplify the primitive handling logic.
No functional changes.
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260313185333.2370733-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the correct function parameter names in kernel-doc comments to
avoid these warnings:
Warning: include/linux/powercap.h:254 function parameter 'name' not
described in 'powercap_register_control_type'
Warning: include/linux/powercap.h:298 function parameter 'nr_constraints'
not described in 'powercap_register_zone'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260312051444.685136-1-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ucontext.h should be an UAPI header as it is used for the kernel's
signal handling interface.
Move the header to the uapi/ directory.
While at it, also add some necessary includes to the new header.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260314-uapi-ucontext-m68k-v1-1-1b8b0e082b79@weissschuh.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The pr_info() call has been commented out and printq40() has been
disabled ever since commit 1da177e4c3 ("Linux-2.6.12-rc2").
Remove both.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260223074311.322070-2-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The kmemleak reports the following memory leak:
Unreferenced object 0xc0000002a7fbc640 (size 64):
comm "kworker/8:1", pid 540, jiffies 4294937872
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................
00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................
backtrace (crc 177d48f6):
__kmalloc_cache_noprof+0x520/0x730
xive_irq_alloc_data.constprop.0+0x40/0xe0
xive_irq_domain_alloc+0xd0/0x1b0
irq_domain_alloc_irqs_parent+0x44/0x6c
pseries_irq_domain_alloc+0x1cc/0x354
irq_domain_alloc_irqs_parent+0x44/0x6c
msi_domain_alloc+0xb0/0x220
irq_domain_alloc_irqs_locked+0x138/0x4d0
__irq_domain_alloc_irqs+0x8c/0xfc
__msi_domain_alloc_irqs+0x214/0x4d8
msi_domain_alloc_irqs_all_locked+0x70/0xf8
pci_msi_setup_msi_irqs+0x60/0x78
__pci_enable_msix_range+0x54c/0x98c
pci_alloc_irq_vectors_affinity+0x16c/0x1d4
nvme_pci_enable+0xac/0x9c0 [nvme]
nvme_probe+0x340/0x764 [nvme]
This occurs when allocating MSI-X vectors for an NVMe device. During
allocation the XIVE code creates a struct xive_irq_data and stores it
in irq_data->chip_data.
When the MSI-X irqdomain is later freed, xive_irq_free_data() is
responsible for retrieving this structure and freeing it. However,
after commit cc0cc23bab ("powerpc/xive: Untangle xive from child
interrupt controller drivers"), xive_irq_free_data() retrieves the
chip_data using irq_get_chip_data(), which looks up the data through
the child domain.
This is incorrect because the XIVE-specific irq data is associated with
the XIVE (parent) domain. As a result the lookup fails and the allocated
struct xive_irq_data is never freed, leading to the kmemleak report
shown above.
Fix this by retrieving the irq_data from the correct domain using
irq_domain_get_irq_data() and then accessing the chip_data via
irq_data_get_irq_chip_data().
Cc: stable@vger.kernel.org
Fixes: cc0cc23bab ("powerpc/xive: Untangle xive from child interrupt controller drivers")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311134336.326996-1-nilay@linux.ibm.com
This uses _RPAGE_SW2 bit for the PMD and PUDs similar to PTEs.
This also adds support for {pte,pmd,pud}_pgprot helpers needed for
follow_pfnmap APIs.
This allows us to extend the PFN mappings, e.g. PCI MMIO bars where
it can grow as large as 8GB or even bigger, to map at PMD / PUD level.
VFIO PCI core driver already supports fault handling at PMD / PUD level
for more efficient BAR mappings.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6fca726574236f556dd4e1e259692e82a4c29e85.1773058761.git.ritesh.list@gmail.com
Architectures like PowerPC uses runtime defined values for
PMD_ORDER/PUD_ORDER. This is because it can use either RADIX or HASH MMU
at runtime using kernel cmdline. So the pXd_index_size is not known at
compile time. Without this fix, when we add huge pfn support on powerpc
in the next patch, vfio_pci_core driver compilation can fail with the
following errors.
CC [M] drivers/vfio/vfio_main.o
CC [M] drivers/vfio/group.o
CC [M] drivers/vfio/container.o
CC [M] drivers/vfio/virqfd.o
CC [M] drivers/vfio/vfio_iommu_spapr_tce.o
CC [M] drivers/vfio/pci/vfio_pci_core.o
CC [M] drivers/vfio/pci/vfio_pci_intrs.o
CC [M] drivers/vfio/pci/vfio_pci_rdwr.o
CC [M] drivers/vfio/pci/vfio_pci_config.o
CC [M] drivers/vfio/pci/vfio_pci.o
AR kernel/built-in.a
../drivers/vfio/pci/vfio_pci_core.c: In function ‘vfio_pci_vmf_insert_pfn’:
../drivers/vfio/pci/vfio_pci_core.c:1678:9: error: case label does not reduce to an integer constant
1678 | case PMD_ORDER:
| ^~~~
../drivers/vfio/pci/vfio_pci_core.c:1682:9: error: case label does not reduce to an integer constant
1682 | case PUD_ORDER:
| ^~~~
make[6]: *** [../scripts/Makefile.build:289: drivers/vfio/pci/vfio_pci_core.o] Error 1
make[6]: *** Waiting for unfinished jobs....
make[5]: *** [../scripts/Makefile.build:546: drivers/vfio/pci] Error 2
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [../scripts/Makefile.build:546: drivers/vfio] Error 2
make[3]: *** [../scripts/Makefile.build:546: drivers] Error 2
Fixes: f9e54c3a2f ("vfio/pci: implement huge_fault support")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/b155e19993ee1f5584c72050192eb468b31c5029.1773058761.git.ritesh.list@gmail.com
After SNP is disabled, any pages allocated as HV_FIXED can now be freed.
Update the page state of these pages and the snp_leak_hv_fixed_pages()
function to free pages on SNP_SHUTDOWN.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260324161301.1353976-8-tycho@kernel.org
Since all implementations of crypt_iv_operations::post now return 0,
change the return type to void.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
There is a spelling mistake in a vdo_log_error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The SEV firmware has support to disable SNP during an SNP_SHUTDOWN_EX command.
Verify that this support is available and set the flag so that SNP is disabled
when it is not being used.
In cases where SNP is disabled, skip the call to amd_iommu_snp_disable(), as
all of the IOMMU pages have already been made shared. Also skip the panic
case, since snp_shutdown() does IPIs.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260324161301.1353976-7-tycho@kernel.org
The locking in gfs2_trans_add_data() and gfs2_trans_add_meta() doesn't
follow the usual coding pattern of checking bh->b_private under lock,
allocating a new bufdata object with the locks dropped, and re-checking
once the lock has been reacquired. Both functions set bh->b_private
without holding the buffer lock. Fix that.
Also, in gfs2_trans_add_meta(), taking the folio lock during the
allocation doesn't actually do anything useful.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In the x86 architecture we have various complicated hardware emulation
facilities on x86-32 to support ancient 32-bit CPUs that very very few
people are using with modern kernels. This compatibility glue is sometimes
even causing problems that people spend time to resolve, which time could
be spent on other things.
As Linus recently remarked:
> I really get the feeling that it's time to leave i486 support behind.
> There's zero real reason for anybody to waste one second of
> development effort on this kind of issue.
Implement the first step and remove M486/M486SX/ELAN support:
CONFIG_M486SX
CONFIG_M486
CONFIG_MELAN
[ There's no recent M486=y kernel package for any mainstream x86
32-bit distribution available that I've been able to find, so
actual users should not be impacted, and any legacy users can
keep using older kernels. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20251214084710.3606385-2-mingo@kernel.org
Enable PIPEDMC_ERROR interrupt bit for display version 35+.
Changes in v2:
- Move PIPEDMC_ERROR interrupt enable to a separate patch (Ville Syrjala)
Changes in v3:
- Add Bspec reference (Suraj Kandpal)
Changes in v4:
- Add TODO to check the enablement of PIPEDMC_ERROR for PTL (Suraj Kandpal)
Changes in v5:
- Move TODO to the beginning of pipedmc_interrupt_mask() (Suraj Kandpal)
Bspec: 70296
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260327064453.2241523-3-dibin.moolakadan.subrahmanian@intel.com
On display version 35+ PIPEDMC_ATS_FAULT and
PIPEDMC_GTT_FAULT interrupt bits are no longer defined.
Update the interrupt mask to drop these.
Changes in v2:
- Move PIPEDMC_ERROR interrupt enable to a separate patch (Ville Syrjala)
Changes in v3:
- Add Bspec reference (Suraj Kandpal)
Changes in v4:
- Move bspec position in commit message(Suraj Kandpal)
Bspec: 70296
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260327064453.2241523-2-dibin.moolakadan.subrahmanian@intel.com
In the context of porting applications to SVM, the Xe GT statistics are
used by application developers to validate expected behavior such as
proper alignment, page fault count and migrations. As those statistics
are made for kernel developers, they assume good understanding of driver
internals, which is not always the case on the application side.
Therefore, this commit documents the usage of GT statistics and clarifies
the meaning of identifiers which correspond to the values exposed via
debugfs. Documentation is close to identifiers declaration to make it
easier to maintain when adding new entries in the future.
v2: Fix page reclaim list (PRL) entries (Matthew Brost)
Assisted-by: GitHub Copilot:claude-sonnet-4.6
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20260327202749.222794-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Qualcomm's IPQ5210 SoC comes with a TLMM block, like all other platforms,
so add a driver for it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
[linusw@kernel.org: Dropped intr_target_reg]
Signed-off-by: Linus Walleij <linusw@kernel.org>
Ast's DP501 initialization reads the register SCU2C at offset 0x1202c
and tries to set it to source data from VGA. But writes the update to
offset 0x0, with unknown results. Write the result to SCU instead.
The bug only happens in ast_init_analog(). There's similar code in
ast_init_dvo(), which works correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 83c6620bae ("drm/ast: initial DP501 support (v0.2)")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.16+
Link: https://patch.msgid.link/20260327133532.79696-2-tzimmermann@suse.de
During dirty logging, all huge pages are write-protected. When the guest
writes to a write-protected huge page, a page fault is triggered. Before
recovering the write permission, the huge page must be split into smaller
pages (e.g., 4K). After splitting, the normal mapping process proceeds,
allowing write permission to be restored at the smaller page granularity.
If dirty logging is disabled because migration failed or was cancelled,
only recover the write permission at the 4K level, and skip recovering the
huge page mapping at this time to avoid the overhead of freeing page tables.
The huge page mapping can be recovered in the ioctl context, similar to x86,
in a later patch.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/202603301612587174XZ6QMCrymBqv30S6BN50@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When enabling dirty log in small chunks (e.g., QEMU default chunk
size of 256K), the chunk size is always smaller than the page size
of huge pages (1G or 2M) used in the gstage page tables. This caused
the write protection to be incorrectly skipped for huge PTEs because
the condition `(end - addr) >= page_size` was not satisfied.
Remove the size check in `kvm_riscv_gstage_wp_range()` to ensure huge
PTEs are always write-protected regardless of the chunk size. Additionally,
explicitly align the address down to the page size before invoking
`kvm_riscv_gstage_op_pte()` to guarantee that the address passed to the
operation function is page-aligned.
This fixes the issue where dirty pages might not be tracked correctly
when using huge pages.
Fixes: 9d05c1fee8 ("RISC-V: KVM: Implement stage2 page table programming")
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/202603301610527120YZ-pAJY6x9SBpSRo1Wg4@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
On all Qualcomm TLMM generations from APQ8084 onwards, the interrupt
target routing bits are located in the same register as the interrupt
configuration bits (intr_cfg_reg). Only five older SoCs — APQ8064,
IPQ8064, MDM9615, MSM8660 and MSM8960 — have a genuinely separate
interrupt target routing register at a different offset (0x400 + 0x4 * id).
Replace MSM_ACCESSOR(intr_target) with a custom accessor that falls back
to intr_cfg_reg when intr_target_reg is zero. Apply the same fallback in
the SCM path. Drop the now-redundant .intr_target_reg initializer from
all SoC drivers where it duplicated intr_cfg_reg, keeping it only in
the five drivers where it genuinely differs.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The intr_target_bit for Eliza was incorrectly set to 5, which is the
value used by older Qualcomm SoCs (e.g. SM8250, MSM8996, X1E80100).
Newer SoCs such as SM8650, SM8750, Milos, and Kaanapali all use
bit 8 for the interrupt target field in the TLMM interrupt configuration
register.
Eliza belongs to the newer generation and should use bit 8 to correctly
route interrupts to the KPSS (Applications Processor). Using the wrong
bit position means the interrupt target routing is silently misconfigured,
which can result in GPIO interrupts not being delivered to the expected
processor.
Fix this by aligning Eliza with the correct value used by its peer SoCs.
Fixes: 6f26989e15 ("pinctrl: qcom: Add Eliza pinctrl driver")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The GPIO controller on PolarFire SoC supports more than one type of
interrupt and needs two interrupt cells.
Fixes: 735806d8a6 ("dt-bindings: gpio: add bindings for microchip mpfs gpio")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Commit 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
introduced a critical section around the adjustmenet of entry->offset.
However this may cause a deadlock if we create the auxiliary shared
proxy devices with this lock taken. We only need to protect
entry->offset while it's read/written so shorten the critical section
and release the lock before creating the proxy device as the field in
question is no longer accessed at this point.
Fixes: 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260325-gpio-shared-deadlock-v1-1-e4e7a5319e95@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When a guest initiates an SBI_EXT_PMU_COUNTER_CFG_MATCH call with
ctr_base=0xfffffffffffffffe, ctr_mask=0xeb5f and flags=0x1
(SBI_PMU_CFG_FLAG_SKIP_MATCH), kvm_riscv_vcpu_pmu_ctr_cfg_match()
first invokes kvm_pmu_validate_counter_mask() to verify whether
ctr_base and ctr_mask are valid, by evaluating:
!ctr_mask || (ctr_base + __fls(ctr_mask) >= kvm_pmu_num_counters(kvpmu))
With the above inputs, __fls(0xeb5f) equals 15, and adding 15 to
0xfffffffffffffffe causes an integer overflow, wrapping around to 13.
Since 13 is less than kvm_pmu_num_counters(), the validation wrongly
succeeds.
Thereafter, since flags & SBI_PMU_CFG_FLAG_SKIP_MATCH is satisfied,
the code evaluates:
!test_bit(ctr_base + __ffs(ctr_mask), kvpmu->pmc_in_use)
Here __ffs(0xeb5f) equals 0, so test_bit() receives 0xfffffffffffffffe
as the bit index and attempts to access the corresponding element of
the kvpmu->pmc_in_use, which results in an invalid memory access. This
triggers the following Oops:
Unable to handle kernel paging request at virtual address e3ebffff12abba89
generic_test_bit include/asm-generic/bitops/generic-non-atomic.h:128
kvm_riscv_vcpu_pmu_ctr_cfg_match arch/riscv/kvm/vcpu_pmu.c:758
kvm_sbi_ext_pmu_handler arch/riscv/kvm/vcpu_sbi_pmu.c:49
kvm_riscv_vcpu_sbi_ecall arch/riscv/kvm/vcpu_sbi.c:608
kvm_riscv_vcpu_exit arch/riscv/kvm/vcpu_exit.c:240
The root cause is that kvm_pmu_validate_counter_mask() does not account
for the case where ctr_base itself is out of range, allowing the
subsequent addition to silently overflow and bypass the check.
Fix this by explicitly validating ctr_base against kvm_pmu_num_counters()
before performing the addition.
This bug was found by fuzzing the KVM RISC-V PMU interface.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Atish Patra <atish.patra@linux.dev>
Link: https://lore.kernel.org/r/20260319035902.924661-1-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When CONFIG_DMA_API_DEBUG is enabled, the DMA debug infrastructure
tracks active mappings per cacheline and warns if two different DMA
mappings share the same cacheline ("cacheline tracking EEXIST,
overlapping mappings aren't supported").
On x86_64, ARCH_KMALLOC_MINALIGN defaults to 8, so small kmalloc
allocations (e.g. the 8-byte hub->buffer and hub->status in the USB
hub driver) frequently land in the same 64-byte cacheline. When both
are DMA-mapped, this triggers a false positive warning.
This has been reported repeatedly since v5.14 (when the EEXIST check
was added) across various USB host controllers and devices including
xhci_hcd with USB hubs, USB audio devices, and USB ethernet adapters.
The cacheline overlap is only a real concern on architectures that
require DMA buffer alignment to cacheline boundaries (i.e. where
ARCH_DMA_MINALIGN >= L1_CACHE_BYTES). On architectures like x86_64
where dma_get_cache_alignment() returns 1, the hardware is
cache-coherent and overlapping cacheline mappings are harmless.
Suppress the EEXIST warning when dma_get_cache_alignment() is less
than L1_CACHE_BYTES, indicating the architecture does not require
cacheline-aligned DMA buffers.
Verified with a kernel module reproducer that performs two kmalloc(8)
allocations back-to-back and DMA-maps both:
Before: allocations share a cacheline, EEXIST fires within ~50 pairs
After: same cacheline pair found, but no warning emitted
Fixes: 2b4bbc6231 ("dma-debug: report -EEXIST errors in add_dma_entry")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215740
Suggested-by: Harry Yoo <harry@kernel.org>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260327124156.24820-1-mikhail.v.gavrilov@gmail.com
i2sbus_add_dev() keeps the matched "sound" child pointer after
for_each_child_of_node() has dropped the iterator reference. Take an
extra reference before saving that node and drop it after the
layout-id/device-id lookup is complete.
The function also stores np in dev->sound.ofdev.dev.of_node without
taking a reference for the embedded soundbus device. Since i2sbus
overrides the embedded platform device release callback, balance that
reference explicitly in the local error path and in i2sbus_release_dev().
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260330-aoa-i2sbus-ofnode-lifetime-v1-1-51c309f4ff06@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error message in cs8409_i2c_bulk_read() incorrectly says "I2C Bulk
Write Failed" when it should say "I2C Bulk Read Failed". This is a
copy-paste error from cs8409_i2c_bulk_write().
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260330054131.434994-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
