While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Tóth János <gomba007@gmail.com>
Link: https://patch.msgid.link/20260515154720.406128-2-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prior to commit 4845865465 ("rtc: ds1307: remove clear of oscillator
stop flag (OSF) in probe"), the oscillator stop flag (OSF) bit was
checked during device probe for the ds1337, ds1339, ds1341, and ds3231
chips; if it was set, it would be cleared and a warning would be logged
saying "SET TIME!". Since that commit, the OSF bit is no longer cleared,
but the warning is still printed.
Directly following that commit, there was no way to get rid of this
warning because nothing cleared the OSF bit on these chips.
The commit associated with the previous commit, 523923cfd5 ("rtc:
ds1307: handle oscillator stop flag (OSF) for ds1341"), made proper use
of the OSF when getting and setting the time in the RTC. However, the
other RTC variants ds1337, ds1339 and ds3231 didn't have a corresponding
change made.
Given that the OSF bit is no longer cleared at probe time when it is
set, the remaining three chips should have the same handling as the
ds1341 chip has for the OSF bit.
Fix the issue on the ds1337, ds1339 and ds3231 chips by applying the
same logic as the ds1341 has to these chips.
Note that any devices brought up between the first referenced commit and
this one may begin mistrusting the time reported by the RTC until it is
set again, if the bit was never explicitly cleared.
Note that only the ds1339 was tested with this change, but the
datasheets for the other chips contain essentially identical
descriptions of the OSF bit so the same change should work.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Fixes: 4845865465 ("rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe")
Reviewed-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Link: https://patch.msgid.link/20260508032518.3696705-2-ronan.dalton@alliedtelesis.co.nz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The condition that needs to be checked for upload completion is the
UPLOAD bit in the completion register going low. The original iterations
of this driver used a do-while and this was converted to a
read_poll_timeout() during upstreaming without the condition being
inverted as it should have been.
I suspect that this went unnoticed until now because a) the first read
was done when the bit was still set, immediately completing the
read_poll_timeout() and b) because the RTC doesn't hold time when power
is removed from the SoC reducing its utility (I for one keep it
disabled). If my first suspicion was true when the driver was
upstreamed, it's not true any longer though, hence the detection of the
problem.
Fixes: 0b31d70359 ("rtc: Add driver for Microchip PolarFire SoC")
CC: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Link: https://patch.msgid.link/20260513-panhandle-ashy-70c6abf84d59@spud
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC_VL_CLR ioctl intends to clear only the battery low flag (BLF),
however the current implementation writes 0 to the status register,
clearing all status bits.
Fix this by writing back the masked status value so that only BLF is
cleared, preserving other status flags.
Fixes: ffe1c5a2d4 ("rtc: abx80x: Implement RTC_VL_READ,CLR ioctls")
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20260415160610.127155-2-apokusinski01@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The logic to decode the year value from the hardware registers is
duplicated in both rtca3_read_time() and rtca3_read_alarm().
Introduce a helper rtca3_decode_year() to centralize this conversion.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In rtca3_initial_setup(), the driver clears the RTCA3_RADJ register and
waits for it to reach zero using readb_poll_timeout(). Check the return
value of readb_poll_timeout() and propagate the error if the poll fails.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In rtca3_set_alarm(), the setup_failed path attempts to disable the
Periodic Interrupt Enable (PIE) bit and wait until it is cleared.
However, the polling condition passed to readb_poll_timeout_atomic()
uses an incorrect expression:
!(tmp & ~RTCA3_RCR1_PIE)
As ~RTCA3_RCR1_PIE evaluates to a mask of all bits except PIE, the
condition effectively waits for all non-PIE bits to become zero, which
is unrelated to the intended operation and is unlikely to ever be true.
This causes the poll to time out unnecessarily.
Fix the condition to check for the PIE bit itself being cleared:
!(tmp & RTCA3_RCR1_PIE)
This correctly waits until PIE is deasserted after being cleared.
Fixes: d448837760 ("rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Epson RX6110 Real Time Clock devicetree binding
from the legacy text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514173851.25088-1-challauday369@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/ajLy2brwvOZEFNNN@gsse-cloud1.jf.intel.com
state, and PLL sequencing.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmoyb9gACgkQ+mJfZA7r
E8pYdwf/W2yy6bNSoUMe8bL6bZzoxHygFSfiNupqHtE9E19LulAaQDcNVjySeWj4
OXrXOkTy2FjtsV4Q9pJJX2cZpAN4TdcDMgB+BRdn+4Z5sja7cGRXmHtIkgHjLzPJ
4TnR/eyKl5+dNZCU/W+W7wX+rUmknnkFUemifOQAC110ts6IYFaNIw94MPAZ3PT0
h5RplS3d54NJs8ma5G/C+u+qMuU8ZIOa5ES32WpNwsDkIVfeyt8sDmEffPCeFxya
RrOC1xp3Bfxh0CuM40NOkZtlBdmLj6Q2oN8L3RruelsWLtfEzS9NarlAkChFLtEJ
Y1Nozk1Lye2FGCOqJsF6YqJ8W713JA==
=GMAa
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2026-06-17' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Only a few simple display fixes around DP MST, CRTC color
state, and PLL sequencing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/ajJxbrt3a_USBecY@intel.com
- use scoped_guard() for RCU read critical section in
z_erofs_decompress_kickoff();
- simplify the RCU critical section loop in
z_erofs_pcluster_begin().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Although zeros can be compressed transparently on EROFS using fixed-size
output compression so that it is never prioritized in the Android use
cases, indicating entire pclusters as holes is still useful to preserve
holes in the sparse datasets; otherwise overlayfs will allocate more
space when copying up, and SEEK_HOLE won't report any hole.
This patch introduces two ways to mark a pcluster as a hole:
- A new Z_EROFS_LI_HOLE compatible flag (bit 14) in the HEAD lcluster
advise field for non-compact (full) indexes;
- A 0-block CBLKCNT value on the first NONHEAD lcluster.
The hole tag is preferred for maximum compatibility since pre-existing
kernels that do not understand Z_EROFS_LI_HOLE will decompress at the
stored blkaddr (the same blkaddr will be shared among all sparse
pclusters). Only the 0-block CBLKCNT approach also works for compact
indexes, but it is limited to big pclusters and new kernels.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The dpaa2-switch driver does not support VLAN uppers while its ports are
bridged. This scenario tried to be prevented by rejecting a bridge join
while VLAN uppers exist but the reverse order was still possible.
This patches adds a check so that the dpaa2-switch also does not accept
VLAN uppers while bridged.
Fixes: f48298d3fb ("staging: dpaa2-switch: move the driver out of staging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260618092813.432535-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs.
Fixes: 47ce7c8545 ("net: ipv6: ioam6: fix double reallocation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260618104336.48934-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe91 ("ipv6:
avoid partial copy for zc"). Before commit ce650a1663 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check.
Fixes: 773ba4fe91 ("ipv6: avoid partial copy for zc")
Signed-off-by: Jungwoo Lee <jwlee2217@gmail.com>
Signed-off-by: Wongi Lee <qw3rtyp0@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/ajFTqRljatR17fFy@DESKTOP-19IMU7U.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __ip_append_data(), when the paged-allocation branch is taken,
alloclen and pagedlen are computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap, but the fraggap bytes carried over
from the previous skb are copied into the new skb's linear area at
offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The
linear area is therefore undersized by fraggap bytes while pagedlen is
overstated by the same amount.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Fixes: 8eb77cc739 ("ipv4: avoid partial copy for zc")
Signed-off-by: Jungwoo Lee <jwlee2217@gmail.com>
Signed-off-by: Wongi Lee <qw3rtyp0@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/ajFR1eLAIs42TN3g@DESKTOP-19IMU7U.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for DualPI2 GSO backlog accounting when it is
used as a child qdisc of QFQ.
The test sends one UDP GSO datagram through a QFQ class with DualPI2 as
the leaf qdisc. DualPI2 splits the skb into two segments. After the
traffic drains, both QFQ and DualPI2 must report zero backlog and zero
qlen.
On kernels with the broken accounting, QFQ can keep a stale non-zero
qlen after all real packets have been dequeued.
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260619151447.223640-2-b1n@b1n.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued.
Fixes: 8f9516daed ("sched: Add enqueue/dequeue of dualpi2 qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260619151447.223640-1-b1n@b1n.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)
and dereferences idev->cnf.accept_untracked_na without a NULL check,
even though its only caller ndisc_recv_na() already fetched and
NULL-checked idev for the same device.
Both reads of dev->ip6_ptr run in the same RCU read-side critical
section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr
between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()
without the synchronize_net() that orders the unregister path, so the
re-fetch returns NULL and oopses:
BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974)
Read of size 4 at addr 0000000000000364
Call Trace:
<IRQ>
ndisc_recv_na (net/ipv6/ndisc.c:974)
icmpv6_rcv (net/ipv6/icmp.c:1193)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479)
ip6_input_finish (net/ipv6/ip6_input.c:534)
ip6_input (net/ipv6/ip6_input.c:545)
ip6_mc_input (net/ipv6/ip6_input.c:635)
ipv6_rcv (net/ipv6/ip6_input.c:351)
</IRQ>
It is reachable by an unprivileged user via a network namespace.
Pass the caller's already validated idev instead of re-fetching it; the
idev stays alive for the whole RCU critical section, so it is safe even
after dev->ip6_ptr has been cleared.
Fixes: aaa5f515b1 ("net: ipv6: new accept_untracked_na option to accept na only if in-network")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260617065512.2529757-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers.
Fixes: 5e6700b3bf ("sit: add support of x-netns")
Link: https://lore.kernel.org/netdev/20260612085941.3158249-1-maoyixie.tju@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260618070817.3378283-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In airoha_dev_select_queue(), the expression:
queue = (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES;
implicitly converts to unsigned arithmetic: when skb->priority is 0
(the default for unclassified traffic), (0u - 1u) wraps to UINT_MAX,
and UINT_MAX % 8 = 7, routing default best-effort packets to the
highest-priority QoS queue. This causes QoS inversion where the
majority of traffic on a PON gateway starves actual high-priority
flows (VoIP, gaming, etc.).
The "- 1" offset was a leftover from the ETS offload implementation
that has since been removed. The correct mapping is a direct modulo:
queue = skb->priority % AIROHA_NUM_QOS_QUEUES;
This maps priority 0 → queue 0 (lowest), priority 7 → queue 7
(highest), with higher priorities wrapping around. This is the
standard Linux sk_prio → HW queue mapping used by other drivers.
Fixes: 2b288b8156 ("net: airoha: Introduce ndo_select_queue callback")
Link: https://lore.kernel.org/netdev/178185573207.2378135.3729126358670287878@gmail.com/
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/178194366700.2485734.5368768965976693502@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when
TCA_CT_LABELS is present, but two later error sites use a bare return
instead of "goto err", skipping the err: nf_connlabels_put() cleanup.
They also precede the "p->put_labels = put_labels" assignment, so the
tcf_ct_params_free() fallback does not release the count either. Each
failed RTM_NEWACTION on these paths leaks one nf_connlabels reference:
net->ct.labels_used is incremented and never released. The action is
reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged
user namespace on default-userns kernels.
Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace
(e.g. via user namespaces) leaks one nf_connlabels reference per failed
RTM_NEWACTION on the two error paths; net->ct.labels_used is never
released.
The err: label is safe to reach from both sites: p->tmpl is still NULL
there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so
no inline release is needed.
Fixes: 70f06c115b ("sched: act_ct: switch to per-action label counting")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260617215708.1115818-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe().
Fixes: dcc34ef7c8 ("net: ibm: emac: manage emac_irq with devm")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260618023405.415644-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2026-06-20
An overdue pull request for ieee802154, catching up on all the AI found issues
at last.
Shitalkumar Gandhi fixed problems in the ca8210 driver for cases where we could
have a leak or a pointer truncation.
Robertus Diawan Chris made sure we do not overwrite the return code when
associating.
Michael Bommarito worked on properly gating our netlink API use in the llsec
security context.
Ivan Abramov cleaned up the netns cases as he did in other subsystems.
Doruk Tan Ozturk ensures we have the correct skn ready in cryptoo operation (to
avoid a silent overwrite).
Aleksandr Nogikh fixed a kernel-infoleak detected by syzbot.
* tag 'ieee802154-for-net-next-2026-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: allow legacy LLSEC ADD/DEL ops to pass strict validation
ieee802154: admin-gate legacy LLSEC dump operations
mac802154: Prevent overwrite return code in mac802154_perform_association()
ieee802154: fix kernel-infoleak in dgram_recvmsg()
mac802154: llsec: add skb_cow_data() before in-place crypto
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ieee802154: Remove WARN_ON() in cfg802154_pernet_exit()
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
ieee802154: Restore initial state on failed device_rename() in cfg802154_switch_netns()
====================
Link: https://patch.msgid.link/20260620174903.1010671-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- gw: don't deselect gateway with active hardif
- TTL fixes in bcast/mcast and fragmentation handling (4 patches)
- BATMAN V: prevent OGM aggregation on disabled hardif
- tp_meter: concurrency and range fixes, add cap to unacked list
(4 patches)
- tt: fix unchecked VLAN ID in tt for local add and roam (2 patches)
- dat: check VLAN ID in the hash
- tvlv: enforce 2-byte alignment
- tvlv: avoid race of cifsnotfound handler state
-----BEGIN PGP SIGNATURE-----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=K1KM
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260619' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes, all by Sven Eckelmann:
- gw: don't deselect gateway with active hardif
- TTL fixes in bcast/mcast and fragmentation handling (4 patches)
- BATMAN V: prevent OGM aggregation on disabled hardif
- tp_meter: concurrency and range fixes, add cap to unacked list
(4 patches)
- tt: fix unchecked VLAN ID in tt for local add and roam (2 patches)
- dat: check VLAN ID in the hash
- tvlv: enforce 2-byte alignment
- tvlv: avoid race of cifsnotfound handler state
* tag 'batadv-net-pullrequest-20260619' of https://git.open-mesh.org/batadv:
batman-adv: tvlv: avoid race of cifsnotfound handler state
batman-adv: tvlv: enforce 2-byte alignment
batman-adv: dat: prevent false sharing between VLANs
batman-adv: tt: track roam count per VID
batman-adv: tt: don't merge change entries with different VIDs
batman-adv: tp_meter: handle overlapping packets
batman-adv: tp_meter: prevent parallel modifications of last_recv
batman-adv: tp_meter: annotate last_recv_time access with READ/WRITE_ONCE
batman-adv: tp_meter: restrict number of unacked list entries
batman-adv: v: prevent OGM aggregation on disabled hardif
batman-adv: frag: avoid underflow of TTL
batman-adv: frag: ensure fragment is writable before modifying TTL
batman-adv: fix (m|b)cast csum after decrementing TTL
batman-adv: ensure bcast is writable before modifying TTL
batman-adv: gw: don't deselect gateway with active hardif
====================
Link: https://patch.msgid.link/20260619070045.438101-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On PF shutdown, the current driver free mcs hardware
resources though mcs resources are not allocated to it.
This patch checks the mcs resources status and if resources
are allocated then only sends mailbox message to free them.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When all MCS resources mapped to a PF are being freed then clear
stats of all those resources too.
Fixes: 815debbbf7 ("octeontx2-pf: mcs: Clear stats before freeing resource")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_alloc_free_slots() always passed NPC_MCAM_KEY_X2 into
__npc_subbank_alloc(), which must match sb->key_type, so defrag never
allocated replacement slots on X4 banks. Pass the subbank key type for
bank 0, and only extend the search into bank 1 for X2 (X4 MCAM indices
are confined to b0b..b0t).
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617102149.1309913-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_ppe_init(), when accounting is enabled, the error paths for
dmam_alloc_coherent(mib) and devm_kzalloc(acct) failures return NULL
directly, bypassing the err_free_l2_flows label that destroys the
rhashtable initialized earlier.
While this leak only occurs during probe (not runtime) and the leaked
memory is minimal (an empty rhash table), fixing it ensures proper
error path cleanup consistency.
Fix by changing the two return NULL statements to goto err_free_l2_flows.
Fixes: 603ea5e7ff ("net: ethernet: mtk_eth_soc: fix memory leak in error path")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178167550101.2217645.14579307712717502425@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here.
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Reported-by: Johan Thomsen <write@ownrisk.dk>
Closes: https://lore.kernel.org/netdev/CAKv6aAM8_EWgXScnKmKYm_4SwGDVBK++dzfP+Y6msUXbp99QUw@mail.gmail.com/
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260616100332.1308294-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP.
Fixes: 25b0b9c4e8 ("tipc: handle collisions of 32-bit node address hash values")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260617135744.3383175-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prestera_port_sfp_bind() returns err after walking the ports node. If no
child node matches the port's front-panel id, err is never assigned.
Initialize err to 0 because absence of a matching optional port device
tree node is not an error. In that case no phylink is created and port
creation should continue with port->phy_link left NULL. Errors from
malformed matched nodes and phylink_create() still propagate.
Fixes: 52323ef754 ("net: marvell: prestera: add phylink support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260617193228.1653582-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I keep having to do this, because people think they can just move
directories around and move the gitignore files around with them.
You really can't do that - the old generated files stay around for
others, and still need to be ignored in the old location.
So when moving gitignore entries around because you moved the files (or
when moving a whole gitignore file around because the directory it was
in moved), the old gitignore situation needs to be dealt with.
Yes, those files may have moved in *your* tree when you moved the
directory. And yes, new repositories will never even have seen them.
But all those other developers that see the result of your move still
likely have a working tree with the old state, and the files that were
hidden from git by an old gitignore file do not suddenly become
relevant.
Fixes: 3626738bc7 ("raid6: move to lib/raid/")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Everything:
Total patches: 108
Reviews/patch: 0.84
Reviewed rate: 75%
Patch series in this merge:
- The 2 patch series "taskstats: fix TGID dead-thread stat retention"
from Yiyang Chen fixes a taskstats TGID aggregation bug where fields
added in the TGID query path were not preserved after thread exit, and
adds a kselftest covering the regression.
- The 2 patch series "lib/tests: string_helpers: Slight improvements"
from Andy Shevchenko improves lib/tests/string_helpers_kunit.c a little.
- The 2 patch series "lib/base64: decode fixes" from Josh Law addreesses
minor issues in lib/base64.c.
- The 3 patch series "selftests/filelock: Make output more kselftestish"
from Mark Brown makes the output from the ofdlocks test a bit easier for
tooling to work with, and also ignores the generated file.
- The 3 patch series "uaccess: unify inline vs outline
copy_{from,to}_user() selection" from Yury Norov simplifies the usercopy
code by removing the selectability of inlining copy_{from,to}_user().
- The 5 patch series "ocfs2: validate inline xattr header consumers"
from ZhengYuan Huang fixes a number of possible issues in the ocfs2
xattr code.
- The 8 patch series "lib and lib/cmdline enhancements" from Dmitry
Antipov provides additional robustness checking in the cmdline handling
code and its in-kernel testing and selftests.
- The 18 patch series "cleanup the RAID6 P/Q library" from Christoph
Hellwig cleans up the RAID6 P/Q library to match the recent updates to
the RAID 5 XOR library and other CRC/crypto libraries.
- The 3 patch series "ocfs2: harden inode validators against forged
metadata" from Michael Bommarito adds three structural checks to OCFS2
dinode validation so malformed on-disk fields are rejected before
ocfs2_populate_inode() copies them into the in-core inode.
- The 2 patch series "lib/raid: replace __get_free_pages() call with
kmalloc()" from Mike Rapoport cleans up the lib/raid code by using
kmalloc() in more places.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajgeIQAKCRDdBJ7gKXxA
jmlWAQCLJVDZNJMFaXy4a+YHdu3tfemLpSy83A0Le61tOZUdBQD/Sf/7rhgeaM74
32yp53TZLA8xHImCGEin/1ddPJ8DbgY=
=GW2I
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for a
secondary read operation template.
- Continuous reads in general have also been enhanced/fixed for avoiding
potential issues at probe time and at block boundaries.
SPI NOR changes:
- Big set of cleanups and improvements to the locking support. This
series contains some cleanups and bug fixes for code and documentation
around write protection. Then support is added for complement locking,
which allows finer grained configuration of what is considered locked
and unlocked. Then complement locking is enabled on a bunch of Winbond
W25 flashes.
- Fix die erase support on Spansion flashes. Die erase is only supported
on multi-die flashes, but the die erase opcode was set for all. When
the opcode is set, it overrides the default chip erase opcode which
should be used for single-die flashes. Only set the opcode on
multi-die flashes. Also, the opcode was not set on multi-die s28hx-t
flashes. Set it so they can use die-erase correctly.
General changes:
- A few drivers and mappings have been removed following SoCs support
removal.
- And again, there is the usual load of misc improvements and fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmo3/r8ACgkQJWrqGEe9
VoQcbgf/c6g4W+83hH9E+/6p2CvAFt1SdVSkR5wLG7duZjD1uhSqlHNEOW2auNMn
fdzgaXr/XmOP0Saob2LV8nNMWDJ2oWmqvJ065obK/Aj+BTDZwPaeMDDxdjMKTxkk
kOzqE7HuBrIotAMtsEpiMm1sGjRQYSQpVFfWmCMANWGnU44aaqGfGWKQVV/ZNlZK
YToLnjHdB8B0jU8FtJEbJoG7UeM2WFGp1/Ok8E7Tci47JklDybYauJnICDkwHSv/
UcdR0QdiOw1K2pRx9Ja/YIOmr7JmZ1ERX1bEI5Um9dsGUeAhB5Vd0YrKLiX1o98W
ygLyTPRTuKNihN7tr5ZLWoNrD5pzUg==
=6rG2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"NAND changes:
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for
a secondary read operation template
- Continuous reads in general have also been enhanced/fixed for
avoiding potential issues at probe time and at block boundaries
SPI NOR changes:
- Big set of cleanups and improvements to the locking support.
This series contains some cleanups and bug fixes for code and
documentation around write protection. Then support is added for
complement locking, which allows finer grained configuration of
what is considered locked and unlocked. Then complement locking is
enabled on a bunch of Winbond W25 flashes
- Fix die erase support on Spansion flashes.
Die erase is only supported on multi-die flashes, but the die erase
opcode was set for all. When the opcode is set, it overrides the
default chip erase opcode which should be used for single-die
flashes. Only set the opcode on multi-die flashes. Also, the opcode
was not set on multi-die s28hx-t flashes. Set it so they can use
die-erase correctly
General changes:
- A few drivers and mappings have been removed following SoCs support
removal
- And again, there is the usual load of misc improvements and fixes"
* tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (63 commits)
mtd: cfi: Use common error handling code in two functions
mtd: slram: simplify register_device() cleanup
mtd: slram: remove failed entries from the device list
mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST
mtd: spi-nor: spansion: add die erase support in s28hx-t
mtd: spi-nor: spansion: use die erase for multi-die devices only
mtd: spi-nor: winbond: Add W25Q02NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIQ CMP locking support
mtd: spi-nor: winbond: Add W25H02NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H01NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H512NWxxAM CMP locking support
mtd: spi-nor: Add steps for testing locking with CMP
mtd: spi-nor: swp: Add support for the complement feature
mtd: spi-nor: Add steps for testing locking support
mtd: maps: remove obsolete impa7 map driver
mtd: maps: remove uclinux map driver
mtd: maps: remove AMD Élan specific drivers
mtd: inftlmount: convert printk(KERN_WARNING) to pr_warn
mtd: Consistently define pci_device_ids
...
states_show() adds CPU hotplug state names into a single sysfs buffer
using sprintf(). With enough registered states, this can write past the
end of the PAGE_SIZE buffer.
Use sysfs_emit_at() so output is bounded.
Fixes: 98f8cdce1d ("cpu/hotplug: Add sysfs state interface")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260619163719.12103-2-include@grrlz.net
cpuhp_invoke_callback() unwinds earlier callbacks for the same
hotplug state when one instance fails. The rollback path currently
reuses ret, so a successful rollback can hide the original error and
make the failed transition look successful.
Keep the rollback result separate from the original error.
Fixes: 724a86881d ("smp/hotplug: Callback vs state-machine consistency")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260619163719.12103-1-include@grrlz.net
This reverts commit 7b32f64bc5.
This patch caused a significant performance regression, so revert it, and
we can determine whether the approach is sensible or not moving forwards,
and if so how to avoid this.
There was a merge conflict with commit de97ae6222 ("mm/readahead: no
PG_readahead on EOF"), care was taken to ensure that the revert retained
the behaviour of this patch and cleanly reverts commit 7b32f64bc5 ("mm:
limit filemap_fault readahead to VMA boundaries") only.
Link: https://lore.kernel.org/20260619112852.104213-1-ljs@kernel.org
Fixes: 7b32f64bc5 ("mm: limit filemap_fault readahead to VMA boundaries")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202606181547.617a6967-lkp@intel.com
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tracepoint for node relcaims takes a `struct mem_cgroup *`
as the third argument, so pass NULL instead of 0 to fix warning
about using an integer as a pointer.
Fixes the following warnings:
mm/vmscan.c:6753:66: warning: Using plain integer as NULL pointer
mm/vmscan.c:6757:58: warning: Using plain integer as NULL pointer
mm/vmscan.c:7818:60: warning: Using plain integer as NULL pointer
Link: https://lore.kernel.org/20260616095906.210016-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use mapping_mapped() to simplify the code, make the code tidy and clean.
Link: https://lore.kernel.org/20260612073032.33228-1-huangsj@hygon.cn
Signed-off-by: Huang Shijie <huangsj@hygon.cn>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test ignores the return value of fork(), so both the parent and the
(newly created) child run the COW verification loops and then call
hmm_buffer_free() before returning into the kselftest harness, which
_exit()s each side. This duplicated teardown sequence has been observed
to manifest as a SIGSEGV in the test child, e.g.:
hmm-tests[360141]: segfault (11) at 0 nip 10006964 lr 1000ac3c code 1
in hmm-tests[6964,10000000+30000]
Fix this by adopting the same fork()-then-wait pattern already used by the
nearby anon_write_child / anon_write_child_shared tests in this file: the
child performs the COW verification and then _exit(0)s so it does not run
the test teardown, while the parent independently verifies COW, waits for
the child, and only then frees the buffer.
Link: https://lore.kernel.org/20260611034102.1030738-4-aboorvad@linux.ibm.com
Fixes: b659baea75 ("mm: selftests for exclusive device memory")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Sayali Patil <sayalip@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
migrate_partial_unmap_fault() and migrate_remap_fault() use hardcoded
offsets based on a 2MB PMD size. Similarly, benchmark_thp_migration()
assumes a fixed 2MB THP size when generating test buffer sizes.
Derive offsets and test sizes from the runtime PMD page size returned by
read_pmd_pagesize(). If unavailable, fall back to TWOMEG. This allows
the tests to adapt correctly on systems where PMD-sized THP differs from
2MB. Also replace the fixed 1MB unmap size with a PMD-relative value
derived from the runtime PMD size.
On systems with larger PMD sizes, computed test buffer sizes can exceed
INT_MAX. Skip such test cases to avoid overflow.
Link: https://lore.kernel.org/20260611034102.1030738-3-aboorvad@linux.ibm.com
Fixes: 24c2c5b8ff ("selftests/mm/hmm-tests: partial unmap, mremap and anon_write tests")
Fixes: 271a7b2e3c ("selftests/mm/hmm-tests: new throughput tests including THP")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: assorted fixes for hmm-tests", v3.
This series fixes a few issues in hmm-tests that show up when page-size
and huge-page configuration differ from the hardcoded assumptions the
tests were written for (PMD/THP sizing, default hugepage size, and related
cases).
It also includes a fix to exclusive_cow: the test ignored the return value
of fork(), so both parent and child ran the same teardown path.
This patch (of 3):
The HMM compound testcase currently assumes only PMD-level mappings and
fails on systems where default_hugepagesz=1G is set, because the region is
then reported by the device at PUD level.
Determine the mapping level (PMD or PUD) the device reports for the first
page of the range and require every page to match that level exactly via
ASSERT_EQ(). This accepts PUD-level mappings while preserving the
expected/observed protection values printed on failure, and rejects a
fragmented mapping that mixes PMD- and PUD-level entries within the same
range (which a per-page OR check would have let pass).
Link: https://lore.kernel.org/20260611034102.1030738-1-aboorvad@linux.ibm.com
Link: https://lore.kernel.org/20260611034102.1030738-2-aboorvad@linux.ibm.com
Fixes: e478425bec ("mm/hmm: add tests for hmm_pfn_to_map_order()")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gup_test accepts an address and size from the debugfs ioctl and repeatedly
compares against addr + size. If that addition wraps, the loop can be
skipped and the ioctl returns success with size rewritten to zero.
Compute the end address once with overflow checking and use that checked
end for the loop bounds.
Assisted-by: Codex:gpt-5.5-cyber-preview
Link: https://lore.kernel.org/20260609004814.1240586.6294d614ac80.gup-test-range-end-wrap@trailofbits.com
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_frag selftest module accepts test_push_cpu and test_pop_cpu as
signed module parameters, then validates them by passing them directly to
cpu_active().
That validation is itself unsafe for negative or out-of-range CPU numbers.
For example, test_push_cpu=-1 is converted to a very large unsigned CPU
number before cpu_active() reaches cpumask_test_cpu(), which trips the
cpumask range check with CONFIG_DEBUG_PER_CPU_MAPS enabled.
Reject CPU values outside [0, nr_cpu_ids) before asking whether the CPU is
active.
Assisted-by: Codex:gpt-5.5-cyber-preview
Link: https://lore.kernel.org/20260605184157.2490353-1-sam.moelius@trailofbits.com
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
