When code had been changed to use for_each_set_clump8(), it mistakenly
switched from chip->nport to chip->tpin since the cy8c9540 and cy8c9560
have a 4-pin gap. This, in particular, led to the missed read of
the last bank interrupt status register and hence missing interrupts
on those pins. Restore the upper limit in for_each_set_clump8() to take
into consideration that gap.
Fixes: 83e29a7a1f ("pinctrl: cy8c95x0; Switch to use for_each_set_clump8()")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Fix two issues in the intel_pstate driver causing it to crash when
its sysfs interface is used on a system with some offline CPUs (David
Arcari, Srinivas Pandruvada)
- Update the last user of the pm_runtime_put() return value to discard
it and turn pm_runtime_put() into a void function (Rafael Wysocki)
- Update Daniel Lezcano's contact information in MAINTAINERS and
.mailmap (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmgsbkSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO19AsH/3gG3rKHACuNmqGC487gFux+zvT9rFJf
A6BrhKUSAUXiKa32d9qfbGOC2sGvfNsIxUFo/lzxPWm5AreIGSMvAm6MlfS0J05v
mhoPslsrY516p1l+kRsZkCq3vk58ZpEiwGrSEaHU7zGe0yldWPSeQ/hab7Ff/uZv
/rNDE70eabvl572ch079JfqzXRZ4nar/mbTNNywwqq6m3TFkNTTHAfJ2KXY4iKv/
VKeIrxecksOqslmMPHb1vnRaKdAx2WssRx3bVAvbCrObAoSs1hFiu7RK2DQOsUSy
f3h4csixhItNI+ERDQY2AJPXnEyr+pFtkcv0WCG5CBOBx4CrubptwTs=
=iFsD
-----END PGP SIGNATURE-----
Merge tag 'pm-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two intel_pstate driver issues causing it to crash on sysfs
attribute accesses when some CPUs in the system are offline, finalize
changes related to turning pm_runtime_put() into a void function, and
update Daniel Lezcano's contact information:
- Fix two issues in the intel_pstate driver causing it to crash when
its sysfs interface is used on a system with some offline CPUs
(David Arcari, Srinivas Pandruvada)
- Update the last user of the pm_runtime_put() return value to
discard it and turn pm_runtime_put() into a void function (Rafael
Wysocki)
- Update Daniel Lezcano's contact information in MAINTAINERS and
.mailmap (Daniel Lezcano)"
* tag 'pm-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Update contact with the kernel.org address
cpufreq: intel_pstate: Fix crash during turbo disable
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
PM: runtime: Change pm_runtime_put() return type to void
pmdomain: imx: gpcv2: Discard pm_runtime_put() return value
In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when
remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the
nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to
fail and the nvme-fc transport layer itself will directly call
nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free
the lsrsp resources.
Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.
If online, then lsrsp->done callback will free the lsrsp. Else, return
-ENODEV to signal the nvme-fc transport to handle freeing lsrsp.
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Closes: https://lore.kernel.org/linux-nvme/21255200-a271-4fa0-b099-97755c8acd4c@work/
Fixes: 10c165af35 ("nvmet-fcloop: call done callback even when remote port is gone")
Signed-off-by: Justin Tee <justintee8345@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
I apologise for this being late, I wanted to leave it in the next tree
for a while, and the work I did came in late, but I really don't want to
ship 7.0 with these issues. It's been in the next tree since Feb 13,
and I had to rebase on Feb 23 to add a missed review and to fold in a
fix that didn't make sense by itself.
This mostly revolves around getting the driver to behave when the IPMI
device misbehaves. Past attempts have not worked very well because I
didn't have hardware I couldmake do this, and AI was fairly useless for
help on this.
So I modified qemu and my test suite so I could reproduce a misbehaving
IPMI device, and with that I was able to fix the issues.
-----BEGIN PGP SIGNATURE-----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=aS6x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI driver fixes from Corey Minyard:
"This mostly revolves around getting the driver to behave when the IPMI
device misbehaves. Past attempts have not worked very well because I
didn't have hardware I could make do this, and AI was fairly useless
for help on this.
So I modified qemu and my test suite so I could reproduce a
misbehaving IPMI device, and with that I was able to fix the issues"
* tag 'for-linus-7.0-1' of https://github.com/cminyard/linux-ipmi:
ipmi:si: Fix check for a misbehaving BMC
ipmi:msghandler: Handle error returns from the SMI sender
ipmi:si: Don't block module unload if the BMC is messed up
ipmi:si: Use a long timeout when the BMC is misbehaving
ipmi:si: Handle waiting messages when BMC failure detected
ipmi:ls2k: Make ipmi_ls2k_platform_driver static
ipmi: ipmb: initialise event handler read bytes
ipmi: Consolidate the run to completion checking for xmit msgs lock
ipmi: Fix use-after-free and list corruption on sender error
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
Fixes: b30d5de3d4 ("drm/xe/configfs: Add mid context restore bb")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260225013448.3547687-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Somehow people got into the habit of putting labels at the tops of
documentation files, even when they are not used. It is better to just
give the name of a file when linking to the whole thing; remove the label
and update the references accordingly.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
SCX_EFLAG_INITIALIZED is the sole member of enum scx_exit_flags with no
explicit value, so the compiler assigns it 0. This makes the bitwise OR
in scx_ops_init() a no-op:
sch->exit_info->flags |= SCX_EFLAG_INITIALIZED; /* |= 0 */
As a result, BPF schedulers cannot distinguish whether ops.init()
completed successfully by inspecting exit_info->flags.
Assign the value 1LLU << 0 so the flag is actually set.
Fixes: f3aec2adce ("sched_ext: Add SCX_EFLAG_INITIALIZED to indicate successful ops.init()")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When CONFIG_DEBUG_INFO_BTF_MODULES is enabled and vmlinux is available,
Makefile.modfinal and gen-btf.sh will try to use resolve_btfids on the
module .ko. install-extmod-build currently does not package
resolve_btfids, so that step fails.
Package resolve_btfids if it may be used.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260226-kbuild-resolve_btfids-v1-1-2bf38b93dfe7@linutronix.de
[nathan: Small commit message tweaks]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Proper steering+termination for Xe3p_XPC NODE and BANK multicast ranges
was added in commit 6d5511e56b ("drm/xe/xe3p_xpc: Add MCR steering for
NODE and L3BANK ranges") but we forgot to remove the corresponding TODO
comment at the top of the block. Drop it now to avoid confusion.
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260225203719.3310570-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Merge series from Svyatoslav Ryhel <clamor95@gmail.com>:
The initial goal was only to add support for the CPCAP used in the Mot
Tegra20 board; however, since the documentation was already partially
converted, I decided to complete the conversion to schema too.
struct i915_address_space is used in an opaque fashion in the display
parent interface, but it's just one include away from being
non-opaque. And anyway the name is rather specific.
Switch to using the struct intel_dpt instead, which embeds struct
i915_address_space anyway. With the definition hidden in i915_dpt.c,
this can't be accidentally made non-opaque, and the type seems rather
more generic anyway.
We do have to add a new helper i915_dpt_to_vm(), as there's one case in
intel_fb_pin_to_dpt() that requires direct access to struct
i915_address_space. But this just underlines the point about opacity.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/daa39178c0b0305b010564952d691f06e3cd63ca.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rename struct i915_dpt to intel_dpt. This may seem rather inconsistent
considering we just renamed the functions the other way round, but the
intent here is to lift struct intel_dpt to the display parent interface
as the generic opaque type for DPT instead of the very specific struct
i915_address_space.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/afb89dcce35c5b0cff2007b58d6ee20fd3200c24.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The remaining functions declared in intel_dpt.h are i915 specific, and
so are the users, so we can move them to i915_dpt.h. There are some
useless intel_dpt.h includes around that we can remove.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/de16eddbb49110b56ff44899d9498e3081da91fa.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Split the size determination between caller and callee to drop the
dependency on struct intel_framebuffer from DPT code, but avoid adding a
dependency on I915_GTT_PAGE_SIZE in the caller side.
Pass zero size to let intel_dpt_create() handle the regular obj->size
case, but remapped size if fb needs stride remap.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/3a6e987ce8bb9f2c8d90c35342de14494a64de1b.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3a415daa3e ("wifi: ath11k: add P2P IE in beacon template")
Fixes: 335a92765d ("wifi: ath11k: MBSSID beacon support")
Suggested-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260130084451.110768-1-zilin@seu.edu.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add initial thermal support by wiring up a per-radio (pdev) hwmon temperature
sensor backed by the existing WMI pdev temperature command and event.
When userspace reads the sysfs file temp1_input, the driver sends
WMI_PDEV_GET_TEMPERATURE_CMDID (tag WMI_TAG_PDEV_GET_TEMPERATURE_CMD) and waits
for the corresponding WMI_PDEV_TEMPERATURE_EVENTID
(tag WMI_TAG_PDEV_TEMPERATURE_EVENT) to get the temperature and pdev_id.
Export the reported value in millidegrees Celsius as required by hwmon.
The temperature reported is per-radio (pdev). In a multi-radio wiphy under a
single phy, a separate hwmon device is created for each radio.
Sample command and output:
$ cat /sys/devices/pci0000:00/.../ieee80211/phyX/hwmonY/temp1_input
$ 50000
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Co-developed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This only worked by chance, because all callers of this macro used the
same identifiers that were expected by the macro.
$ grep -rn ath_for_each_chanctx
drivers/net/wireless/ath/ath9k/main.c:1576: ath_for_each_chanctx(sc, ctx)
drivers/net/wireless/ath/ath9k/main.c:2554: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:165: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:291: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:861: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/debug.c:717: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/ath9k.h:446:#define ath_for_each_chanctx(_sc, _ctx) \
Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: <stable+noautosel@kernel.org> # the code worked by chance
Fixes: c4dc0d040e ("ath9k: Fetch appropriate operating channel context")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/6ab107cf786f9d05dc4d84ea4e2d1b219ce108c0.1766355822.git.alx@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The firmware trustzone needs a special call to bring up the secondary
cpu core on the Manta board. This seems to be not needed on other
exynos5 boards and comes down to the available firmware on
a particular board.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
Signed-off-by: Lukas Timmermann <linux@timmermann.space>
Reviewed-by: Henrik Grimler <henrik@grimler.se>
Link: https://patch.msgid.link/20260127-lat3st-staging-v4-3-797469aaaf9d@timmermann.space
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Manta is the code name for Google Nexus 10, and was manufactured by
Samsung with their Exynos5250 SoC.
Add an initial device-tree file for this board.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
Co-developed-by: Lukas Timmermann <linux@timmermann.space>
Signed-off-by: Lukas Timmermann <linux@timmermann.space>
Link: https://patch.msgid.link/20260127-lat3st-staging-v4-2-797469aaaf9d@timmermann.space
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge cpufreq and runtime PM updates for 7.0-rc2:
- Fix two issues in the intel_pstate driver causing it to crash when
its sysfs interface is used on a system with some offline CPUs (David
Arcari, Srinivas Pandruvada)
- Update the last user of the pm_runtime_put() return value to discard
it and turn pm_runtime_put() into a void function (Rafael Wysocki)
* pm-cpufreq:
cpufreq: intel_pstate: Fix crash during turbo disable
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
* pm-runtime:
PM: runtime: Change pm_runtime_put() return type to void
pmdomain: imx: gpcv2: Discard pm_runtime_put() return value
- amdxdna: Fix for a deadlock, a NULL pointer dereference, a suspend
failure, a hang, an out-of-bounds access, a buffer overflow, input
sanitization and other minor fixes.
- dw-dp: An error handling fix
- ethosu: A binary shift overflow fix
- imx: An error handling fix
- logicvc: A dt node reference leak fix
- nouveau: A WARN_ON removal
- samsung-dsim: A memory leak fix
- sharp-memory: A NULL pointer dereference fix
- vmgfx: A reference count and error handling fix
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaaAF6AAKCRAnX84Zoj2+
dmHFAYD7ArP5sz46K37kEHWE/HIHKnDT52la2KqAfPwRSQr4+ZOj5OO8uhLdTWS2
pMiOvdIBf3zDdAL8ZyTWlrLa4ZdNJemUfe53JGLnJfZ4QYyTVjb8447smgwD84B9
kaMZYBjS2Q==
=xywq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-02-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Several fixes for:
- amdxdna: Fix for a deadlock, a NULL pointer dereference, a suspend
failure, a hang, an out-of-bounds access, a buffer overflow, input
sanitization and other minor fixes.
- dw-dp: An error handling fix
- ethosu: A binary shift overflow fix
- imx: An error handling fix
- logicvc: A dt node reference leak fix
- nouveau: A WARN_ON removal
- samsung-dsim: A memory leak fix
- sharp-memory: A NULL pointer dereference fix
- vmgfx: A reference count and error handling fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260226-heretic-stimulating-swine-6a2f27@penduick
- Fix#7153: Panel Replay stuck with X during mode transitions on Panther Lake
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aZ8JxQkN5oMxXsT6@jlahtine-mobl
Dmabuf name allocations can be less than DMA_BUF_NAME_LEN characters,
but bpf_probe_read_kernel always tries to read exactly that many bytes.
If a name is less than DMA_BUF_NAME_LEN characters,
bpf_probe_read_kernel will read past the end. bpf_probe_read_kernel_str
stops at the first NUL terminator so use it instead, like
iter_dmabuf_for_each already does.
Fixes: ae5d2c59ec ("selftests/bpf: Add test for dmabuf_iter")
Reported-by: Jerome Lee <jaewookl@quicinc.com>
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Link: https://lore.kernel.org/r/20260225003349.113746-1-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path.
Reported-by: syzbot+10cc7f13760b31bd2e61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698c4ce3.050a0220.340abe.000b.GAE@google.com/T/
Fixes: aeea1b86f9 ("bpf, devmap: Exclude XDP broadcast to master device")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Link: https://lore.kernel.org/r/20260225053506.4738-1-kohei@enjuk.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field.
Fixes: b2ad54e153 ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20260226075525.233321-1-tabba@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is cleaner to keep the SDCA code contained and not update the core
code for things that are unlikely to see reuse outside of SDCA. Move the
Q7.8 volume helpers back into the SDCA core code.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260225140118.402695-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA measures volumes in 256ths of a dB, whereas ALSA measures
volumes in 100ths of a dB. Currently the SDCA volume controls are
mapped to ALSA controls by mapping the step size and working out
the number of steps for this mapped step size. Due to quantization
of the step size this means the number of steps in the ALSA
control will rarely match the number of steps in the SDCA control,
leading to skipped values and multiple values that map to the
same volume. This is not a huge problem, the volume is still
increasing and the differences will be small but it is not really
desirable.
It is simpler and more accurate to count the number of steps based on
the SDCA volume levels. This gives a 1-to-1 mapping between control
values and register volumes. The TLV is based on a minimum and maximum
volume so still accurately specifies the volume range.
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260225140118.402695-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Device Layer Selector Unit's are controlled by a Group Entity control
rather than by the host directly. For the purposes of the ASoC class
driver the number of input routes to the SU is controlled by the number
of options within the Group Entity Selected Mode Control. ie. One valid
DAPM route for each valid route defined in the Group Entity.
Currently the code assumes that a Device Layer SU will have a number of
routes equal to the number of potential sources for the SU. ie. it
counts the routes using the SU, but then creates the routes using the
GE. However, this isn't actually true, it is perfectly allowed for the
GE to only define options for some of the potential sources of the SU.o
In such a case the number of routes return will not match those created,
leading to either an overflow of the routes array or undefined routes to
be past to the ASoC core, both of which generally lead to the sound card
failing to probe.
Update the handling for the counting of routes to count the connected
routes on the GE itself and then ignore the source routes on the SU.
This makes it match the logic generating the routes and ensuring that
both remain in sync.
Fixes: 2c8b3a8e6a ("ASoC: SDCA: Create DAPM widgets and routes from DisCo")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260225140118.402695-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a default value for the function reset timeout since version 1.0
of the SDCA specification doesn't actually include this property, it
was added later.
Fixes: 7b6be935e7 ("ASoC: SDCA: Parse Function Reset max delay")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260225140118.402695-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for regulator set used in Motorola Mot board, used as a base
for Atrix 4G and Droid X2 smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260223063858.12208-4-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document regulator composition used by the CPCAP of Tegra20 Mot board,
that is a base for Atrix 4G and Droid X2.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223063858.12208-3-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode
from TXT to YAML format. Main functionality preserved.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223063858.12208-2-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 07919126ec ("netfilter: annotate NAT helper hook pointers
with __rcu"), genksyms fails to parse the __rcu annotation when building
with CONFIG_DEBUG_INFO_BTF=y, CONFIG_PAHOLE_HAS_BTF_TAG=y, and a version
of clang that supports btf_type_tag.
$ clang --version | head -1
ClangBuiltLinux clang version 22.1.0 (https://github.com/llvm/llvm-project.git 4434dabb69916856b824f68a64b029c67175e532)
$ cat kernel/configs/repro.config
CONFIG_BPF_SYSCALL=y
CONFIG_MODVERSIONS=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_INFO_BTF=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 mrproper defconfig repro.config all
WARNING: modpost: EXPORT symbol "nf_nat_ftp_hook" [vmlinux] version generation failed, symbol will not be versioned.
...
WARNING: modpost: EXPORT symbol "nf_nat_irc_hook" [vmlinux] version generation failed, symbol will not be versioned.
...
genksyms falls over parsing the __rcu attribute in the declarator:
# Kernel reproducer
$ make -skj"$(nproc)" ARCH=x86_64 KCFLAGS=-D__GENKSYMS__ LLVM=1 net/netfilter/nf_conntrack_ftp.i
$ scripts/genksyms/genksyms -w <net/netfilter/nf_conntrack_ftp.i &| rg 'syntax error'
include/linux/netfilter/nf_conntrack_ftp.h:29: syntax error
net/netfilter/nf_conntrack_ftp.c:46: syntax error
# Trivial reproducer
$ cat test.c
int (*func)(void *foo, int bar);
int (__attribute__((btf_type_tag("rcu"))) *func_with_attr)(void *foo, int bar);
$ scripts/genksyms/genksyms -w <test.c
<stdin>:2: syntax error
Optionally allow an attribute to precede a declarator to resolve this
error and properly generate symbol versions.
Fixes: 07919126ec ("netfilter: annotate NAT helper hook pointers with __rcu")
Link: https://patch.msgid.link/20260225-genksyms-fix-attribute-declarator-v1-1-1b21478663fb@kernel.org
Tested-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Some system calls never return because it'd terminate the calling
thread. Let's hook the task exit path and update the duration of the
last syscall.
Before:
$ sudo perf trace -as --bpf-summary -- true |& grep exit
(nothing)
After:
$ sudo perf trace -as --bpf-summary -- true |& grep exit
exit_group 1 0 0.004 0.004 0.004 0.004 0.00%
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The alloc_syscall_stats() function always returns an error pointer
(ERR_PTR) on failure.
So replace NULL check with IS_ERR() check after calling
delete_syscall_stats() function.
Fixes: ef2da619b1 ("perf trace: Convert syscall_stats to hashmap")
Signed-off-by: wangguangju <wangguangju@hygon.cn>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The counters_read_on_cpu() function warns when called with IRQs
disabled to prevent deadlock in smp_call_function_single(). However,
this warning is spurious when reading counters on the current CPU,
since no IPI is needed for same CPU reads.
Commit 12eb8f4fff24 ("cpufreq: CPPC: Update FIE arch_freq_scale in
ticks for non-PCC regs") changed the CPPC Frequency Invariance Engine
to read AMU counters directly from the scheduler tick for non-PCC
register spaces (like FFH), instead of deferring to a kthread. This
means counters_read_on_cpu() is now called with IRQs disabled from the
tick handler, triggering the warning.
Fix this by restructuring the logic: when IRQs are disabled (tick
context), call the function directly for same-CPU reads. Otherwise
use smp_call_function_single().
Fixes: 997c021abc ("cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.0-rc2).
Conflicts:
tools/testing/selftests/drivers/net/hw/rss_ctx.py
19c3a2a81d ("selftests: drv-net: rss: Generate unique ports for RSS context tests")
ce5a0f4612 ("selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up")
include/net/inet_connection_sock.h
858d2a4f67 ("tcp: fix potential race in tcp_v6_syn_recv_sock()")
fcd3d039fa ("tcp: make tcp_v{4,6}_send_check() static")
https://lore.kernel.org/aZ8PSFLzBrEU3I89@sirena.org.uk
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
8a96b9144f ("net/mlx5e: Alloc xsk channel param out of mlx5e_open_xsk()")
Adjacent changes:
net/netfilter/ipvs/ip_vs_ctl.c
c59bd9e62e ("ipvs: use more counters to avoid service lookups")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
