Most of the test suites perform a large number of test cases, so
mark the suites as KUNIT_SPEED_SLOW for anyone who finds that useful.
The callback test suites haven't been marked because they don't
perform many test cases, and the tests are quick.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260225125644.1248826-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c931319 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c5 ("media: rc: iguanair: handle timeouts")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209151937.2247202-1-n7l8m4@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a signal arrives after a read has partially completed,
we need to return the number of bytes read. -EINTR is correct
only if that number is zero.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209142048.1503791-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding Gentoo in the operating system list under "Getting Coccinelle".
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260222225536.19196-1-unixbhaskar@gmail.com>
Translate the Documentation/process/changes.rst file into Portuguese.
This document provides the list of minimum software requirements
necessary to compile and run the Linux kernel.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260224031842.140732-1-danielmaraboo@gmail.com>
Remove the duplicate word 'for' in the initramfs_options description.
Signed-off-by: Pranav Kharche <pranavkharche7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260225132951.36624-1-pranavkharche7@gmail.com>
Fix three code-level cleanups in xe_guc_ct.c:
- Use SZ_4K for the queue size alignment assertion in
xe_guc_ct_queue_proc_time_jiffies().
- Drop an unused local variable in guc_ct_send_wait_for_retry().
- Add missing trailing newlines in CT error/warn log messages.
These changes keep behavior unchanged while improving correctness checks
and log formatting.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260223162350.3205364-6-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
guc_ct_send_wait_for_retry() introduced sleep_total_ms as a
budget guard, but never incremented it. As a result, the
"about 1 second" bailout condition never triggers in the H2G
backpressure path.
Accumulate the delay returned by xe_sleep_exponential_ms() into
sleep_total_ms so the timeout logic works as intended.
Fixes: 943c4d0637 ("drm/xe/guc: Limit sleep while waiting for H2G credits")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260223162350.3205364-5-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Use the kernel.org address as a unified single entry to send patches
to. At the same time, update mailmap to group all past contributions.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Switch from PCI power management to the generic power management
framework so the pci_driver hooks can eventually be retired.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Fix wrong variable used for error checking after dma_alloc_coherent()
call. The function checks cdns_ctrl->dma_cdma_desc instead of
cdns_ctrl->cdma_desc, which could lead to incorrect error handling.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac6 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds.
Cc: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/202602151911.AD092DFFCD@keescook/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add compatible string fsl,imx25-nand and fsl,imx27-nand (over 15 years
chips). Add one optional clocks for it because i.MX25 and i.MX27 upstream
DTS defines them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Takahiro has been an active contributor to the SPI NOR subsystem,
providing valuable patches and reviews. Add him as a designated
reviewer to help facilitate patch processing and maintenance.
Cc: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
I have not been actively involved in SPI NOR development recently and
would like to step down to focus on my current day-to-day work.
The subsystem remains in good hands with Pratyush and Michael.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The ECC engine strictly validates that flash OOB size equals exactly
64 bytes. However, some NAND chips have a larger physical OOB while
vendor firmware only uses the first 64 bytes for the ECC layout. For
example the Macronix MX35LF1G24AD found in the Netlink HG323DAC has
128 byte physical OOB but vendor firmware only uses the first 64
bytes (24 bytes free + 40 bytes BCH6 parity), leaving bytes 64-127
unused.
Since the engine only operates on the first 64 bytes of OOB
regardless of the physical size, change the check from exact match
to minimum size. Flash with OOB >= 64 bytes works correctly with
the engine's 64-byte layout.
Suggested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Mention that we are declaring the main SPI NAND flags with a comment.
Align the values with tabs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Introducing CONFIG_MTD_VIRT_CONCAT to separate the legacy flow from the new
approach, where only the concatenated partition is registered as an MTD
device, while the individual partitions that form it are not registered
independently, as they are typically not required by the user.
CONFIG_MTD_VIRT_CONCAT is a boolean configuration option that depends on
CONFIG_MTD_PARTITIONED_MASTER. When enabled, it allows flash nodes to be
exposed as individual MTD devices along with the other partitions.
The solution focuses on fixed-partitions description only as it depends on
device boundaries. It supports multiple sets of concatenated devices, each
comprising two or more partitions.
flash@0 {
reg = <0>;
partitions {
compatible = "fixed-partitions";
part0@0 {
part-concat-next = <&flash0_part1>;
label = "part0_0";
reg = <0x0 0x800000>;
};
flash0_part1: part1@800000 {
label = "part0_1";
reg = <800000 0x800000>;
};
part2@1000000 {
part-concat-next = <&flash1_part0>;
label = "part0_2";
reg = <0x800000 0x800000>;
};
};
};
flash@1 {
reg = <1>;
partitions {
compatible = "fixed-partitions";
flash1_part0: part1@0 {
label = "part1_0";
reg = <0x0 0x800000>;
};
part1@800000 {
label = "part1_1";
reg = <0x800000 0x800000>;
};
};
};
The partitions that gets created are
flash@0
part0_0-part0_1-concat
flash@1
part1_1
part0_2-part1_0-concat
Suggested-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
To enable a more generic approach for concatenating MTD devices,
struct mtd_concat should be accessible beyond the mtdconcat driver.
Therefore, the definition is being moved to a header file.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The AMD QSPI controller supports an advanced connection modes called
Stacked mode which allow the controller to treat two different flashes
as one storage.
In Stacked connection mode flashes share the same SPI bus, but different CS
line, controller driver asserts the CS of the flash to which it needs to
communicate. Stacked mode is a software abstraction rather than a
controller feature or capability. At any given time, the controller
communicates with one of the two connected flash devices, as determined by
the requested address and data length. If an operation starts on one flash
and ends on the other, the mtd layer needs to split it into two separate
operations and adjust the data length accordingly. For more information on
the modes please feel free to go through the controller flash interface
below [1].
To support stacked mode, the existing MTD concat driver has been extended
to be more generic, enabling multiple sets of MTD partitions to be
virtually concatenated, with each set forming a distinct logical MTD
device.
A new Device Tree property is introduced to facilitate this, containing
phandles of the partitions to be concatenated with the one where the
property is defined. This approach supports multiple sets of concatenated
partitions.
[1] https://docs.amd.com/r/en-US/am011-versal-acap-trm/QSPI-Flash-Device-Interface
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes: f5730d44e0 ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull a small idle/vtime series with two cputime accounting fixes plus
related cleanups and minor improvements.
* idle-vtime-fixes-cleanups:
s390/idle: Remove psw_idle() prototype
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
s390/irq/idle: Remove psw bits early
s390/idle: Inline update_timer_idle()
s390/idle: Slightly optimize idle time accounting
s390/idle: Add comment for non obvious code
s390/vtime: Fix virtual timer forwarding
s390/idle: Fix cpu idle exit cpu time accounting
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
psw_idle() does not exist anymore. Remove its prototype.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
do_account_vtime() runs always with interrupts disabled, therefore use
__this_cpu_read() instead of this_cpu_read() to get rid of a pointless
preempt_disable() / preempt_enable() pair.
Also there are no concurrent writers to the cpu time accounting fields
in lowcore. Therefore get rid of READ_ONCE() usages.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq()
when previous context was idle. This saves one conditional branch and is
closer to the original old assembly code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Slightly optimize account_idle_time_irq() and update_timer_idle():
- Use fast single instruction __atomic64() primitives to update per
cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE()
pairs
- stcctm() is an inline assembly with a full memory barrier. This
leads to a not necessary extra dereference of smp_cpu_mtid in
update_timer_idle(). Avoid this and read smp_cpu_mtid into a
variable
- Use __this_cpu_add() instead of this_cpu_add() to avoid disabling /
enabling of preemption several times in a loop in update_timer_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a comment to update_timer_idle() which describes why wall time (not
steal time) is added to steal_timer. This is not obvious and was reported
by Frederic Weisbecker.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes: 56e62a7370 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We should use READ_ONCE when reading from a SQE, make sure timeout gets
a stable timespec address.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There were merge conflicts in:
drivers/staging/rtl8723bs/core/rtw_ieee80211.c
drivers/staging/sm750fb/sm750_hw.c
that were causing problems, so fix this up in here so that going forward
everyone is on the same page and linux-next does not have problems.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modules are removed from modules_list in gb_audio_manager_remove() and
gb_audio_manager_remove_all() before kobject_put(). The TODO suggesting
list deletion in the kobject release callback is stale and misleading.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-3-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gb_audio_manager_get_module() has no in-tree callers so remove the
unused function to avoid carrying dead code.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-2-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed") with
the direct format string dev_err(&pdev->dev, "clk_prepare_enable
failed\n"). The extra level of indirection through %s is unnecessary.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-4-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace hardcoded -EFAULT returns with dev_err_probe() and PTR_ERR()
when devm_clk_get() fails in fsl_mx6_enable(). This ensures the
correct error code is propagated (e.g. -EPROBE_DEFER for deferred
probing) and avoids log noise during probe deferral.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-3-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_get() never returns NULL, so IS_ERR_OR_NULL() checks are
unnecessary. Replace them with IS_ERR() for both the "mlb" and
"pll8_mlb" clock lookups in fsl_mx6_enable().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-2-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed header alignment in hal_sdio_get_cmd_addr_8723b that violated
kernel coding style, cleaned the header by pulling arguments onto the
same line.
Signed-off-by: Dhyan K Prajapati <dhyan19022009@gmail.com>
Link: https://patch.msgid.link/20260225085747.9639-1-dhyan19022009@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor sprintf to sysfs_emit in all show functions of the greybus
audio manager module. This follows the standard kernel practice of
using sysfs_emit for sysfs attributes.
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Link: https://patch.msgid.link/20260225071212.9050-1-chakrabortyshubham66@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Asus VivoBook S15 S5507QA is sold with x1e-78-100 and x1p-42-100 SKUs.
Put the common part into one dtsi file to be included for model-specific dts.
Include the common part in the existing Vivobook S15 device tree.
Tested-by: Colin K. Williams <colin@li-nk.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-3-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enables access to EFI variables on this machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-2-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code:
cnt += in_ie[cnt + 1] + 2; /* get next */
is in both the "if" and "else" branches.
Remove this repetition, which will simplify the code and
improve readability.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260224164445.18316-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines to adhere to the Linux kernel
coding style. Issues reported by checkpatch.pl.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
Link: https://patch.msgid.link/20260224161319.89187-1-gawindlin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
