mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,464,522 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
a552c81ff4 |
mm.git review status for mm-hotfixes-stable..mm-stable
Everything:
Total patches: 321
Reviews/patch: 1.52
Reviewed rate: 68%
Excluding DAMON:
Total patches: 227
Reviews/patch: 2.07
Reviewed rate: 90%
Excluding DAMON and selftests:
Total patches: 203
Reviews/patch: 2.14
Reviewed rate: 91%
Patchsets in this merge:
- The 2 patch series "selftests/mm: clean up build output and verbosity"
from Li Wang removes some noise from the MM selftests build out.
- The 3 patch series "mm: Free contiguous order-0 pages efficiently"
from Ryan Roberts speeds up the freeing of a batch of 0-order pages by
first scanning them for coalescing opportunities. This is applicable to
vfree() and to the releasing of frozen pages.
- The 11 patch series "mm/damon: introduce DAMOS failed region quota
charge ratio" from SeongJae Park addresses a DAMOS usability issue: The
DAMOS quota often exhausts prematurely because it charges for all memory
attempted, causing slow and inconsistent performance when actions fail
on unreclaimable memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- The 8 patch series "selftests/cgroup: improve zswap tests robustness
and support large page sizes" from Li Wang fixes various spurious
failures and improves the overall robustness of the cgroup zswap
selftests.
- The 3 patch series "fix MAP_DROPPABLE not supported errno" from
Anthony Yznaga fixes an issue in the mlock selftests on arm32.
- The 2 patch series "mm: huge_memory: clean up defrag sysfs with
shared" from Breno Leitao does some maintenance work in the huge_memory
code.
- The 3 patch series "treewide: fixup gfp_t printks" from Brendan
Jackman uses the special vprintf() gfp_t conversion in various places.
- The 6 patch series "mm: Fix vmemmap optimization accounting and
initialization" from Muchun Song fixes several bugs in the vmemmap
optimization, mainly around incorrect page accounting and memmap
initialization in the DAX and memory hotplug paths. It also fixes
pageblock migratetype initialization and struct page initialization for
ZONE_DEVICE compound pages.
- The 4 patch series "mm/damon: repost non-hotfix reviewed patches in
damon/next tree" from is a sprinkle of unrelated minor bugfixes for
DAMON.
- The 3 patch series "mm: remove page_mapped()" from David Hildenbrand
remove this function from the tree, replacing it with folio_mapped().
- The 10 patch series "mm/damon: let DAMON be paused and resumed" from
SeongJae Park permits DAMON to be paused and resumed without losing its
current state.
- The 3 patch series "kasan: hw_tags: Disable tagging for stack and
page-tables" from Muhammad Usama Anjum simplifies and speeds up kasan by
removing its ineffective tagging of stacks and page tables.
- The 7 patch series "mm/damon/reclaim,lru_sort: monitor all system rams
by default" from SeongJae Park simplifies deployment on diverse hardware
like NUMA systems by updating DAMON_RECLAIM and DAMON_LRU_SORT to
automatically monitor the physical address range covering all System RAM
areas by default, replacing the overly restrictive behavior that only
targeted the single largest memory block to save on negligible overhead.
- The 2 patch series "mm/damon/sysfs: document filters/ directory as
deprecated" from SeongJae Park updates some DAMON docs.
- The 8 patch series "mm: use spinlock guards for zone lock" from Dmitry
Ilvokhin switches zone->lock handling over to using the guard()
mechanisms.
- The 2 patch series "mm/filemap: tighten mmap_miss hit accounting" from
fujunjie fixes a flaw where the mmap_miss counter over-credited page
cache hits during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads.
- The 2 patch series "selftests/cgroup: Fix false positive failures in
test_percpu_basic" from Li Wang fixes a couple of false-positives in the
cgroup kmem selftests.
- The 2 patch series "mm/damon/reclaim: support monitoring intervals
auto-tuning" from SeongJae Park adds a new parameter to DAMON permitting
DAMON_RECLAIM to automatically tune DAMON's sampling and aggregation
intervals.
- The 2 patch series "mm/damon/stat: add kdamond_pid parameter" from
SeongJae Park chnges DAMON_STAT to provide the pid of its kdamond.
- The 2 patch series "mm/kmemleak: dedupe verbose scan output" from
Breno Leitao removes large amounts of duplicated backtraces from the
verbose-mode kmemleak output.
- The 8 patch series "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)"
from David Hildenbrand reduces our use of CONFIG_HAVE_BOOTMEM_INFO_NODE,
with a view to removing it entirely in a later series.
- The 2 patch series "mm/damon: validate min_region_size to be power of
2" from Liew Rui Yan prevents users from passing a non-power-of-2 value
of `addr_unit', as this later results in undesirable behavior.
- The 2 patch series "mm: document read_pages and simplify usage" from
Frederick Mayle does as claimed.
- The 3 patch series "tools/mm/page-types: Fix misc bugs" from Ye Liu
fixes three issues in tools/mm/page-types.c.
- The 4 patch series "mm: misc cleanups from __GFP_UNMAPPED series" from
Brendan Jackman implements several cleanups in the page allocator and
related code.
- The 12 patch series "mm, swap: swap table phase IV: unify allocation"
from Kairui Song unifies the allocation and charging of anon and shmem
swap in folios, provides better synchronization, consolidates the
metadata management, hence dropping the static array and map, and
improves performance.
- The 28 patch series "mm/damon: introduce data attributes monitoring"
from SeongJae Park extends DAMON for monitoring general data attributes
other than accesses.
- The 5 patch series "mm/vmalloc: free unused pages on vrealloc()
shrink" from Shivam Kalra implements the TODO in vrealloc() to unmap and
free unused pages when shrinking across a page boundary.
- The 3 patch series "mm/damon: documentation and comment fixes" from
niecheng does as advertised.
- The 3 patch series "remove mmap_action success, error hooks" from
Lorenzo Stoakes eliminates custom hooks from mmap_action by removing the
problematic success_hook which allowed drivers to improperly access
uninitialized VMAs. It replaces the error_hook with a simple error-code
field and updates the memory char driver accordingly.
- The 14 patch series "mm/damon: minor improvements for code readability
and tests" from SeongJae Park implements minor improvements in code
readability and tests for DAMON.
- The 2 patch series "mm/damon: fix macro arguments and clarify quota
goals doc" from Maksym Shcherba does those things.
- The 2 patch series "userfaultfd: merge fs/userfaultfd.c into
mm/userfaultfd.c" from Mike Rapoport performs that code movement.
- The 15 patch series "mm/mglru: improve reclaim loop and dirty folio"
from Kairui Song and others cleans up and slightly improves MGLRU's
reclaim loop and dirty writeback handling. Large performance
improvements are measured.
- The 3 patch series "use vma locks for proc/pid/{smaps|numa_maps}
reads" from Suren Baghdasaryan uses per-vma locks when reading
/proc/pid/smaps and /proc/pid/numa_maps similar to reduce contention on
central mmap_lock.
- The 2 patch series "refactors thpsize_shmem_enabled_store() and
thpsize_shmem_enabled_show()" from Ran Xiaokai provides some cleanup
work in the THP code.
- The 2 patch series "selftests/memfd: fix compilation warnings" from
Konstantin Khorenko fixes a few build glitches in the memfd selftest
code.
- The 4 patch series "memcg: shrink obj_stock_pcp and cache multiple
objcgs" from Shakeel Butt resolves a 68% performance regression caused
by NUMA-node cache thrashing around struct obj_stock_pcp by shrinking
its existing fields and expanding it into a multi-slot array that caches
up to five obj_cgroup pointers per CPU, allowing per-node variants of
the same memcg to coexist within a single 64-byte cache line.
- The 2 patch series "zram: writeback fixes" from Sergey Senozhatsky
addresses a couple of unrelated zram writeback issues.
- The 9 patch series "mm: switch THP shrinker to list_lru" from Johannes
Weiner resolves NUMA-awareness issues and streamlines callsite
interaction by refactoring and extending the list_lru API to completely
replace the complex, open-coded deferred split queue for Transparent
Huge Pages (THPs).
- The 2 patch series "mm: improve large folio readahead for exec memory"
from Usama Arif improves large-folio readahead on systems like 64K-page
arm64 by preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- The 6 patch series "userfaultfd/pagemap: pre-existing fixes" from
Kiryl Shutsemau fixes a bunch of minor issues in the
userfaultfd/pagemap, all of which were flagged by Sashiko review of
proposed new material.
- The 5 patch series "mm/sparse-vmemmap: Provide generic
vmemmap_set_pmd() and vmemmap_check_pmd()" from Muchun Song provides
generic versions of these two functions so the four arch-specific
implementations can be removed.
- The 2 patch series "mm/swap, PM: hibernate: fix swapoff race in
uswsusp by pinning swap device" from Youngjun Park addresses a
uswsusp-vs-swapoff race and reduces the swap device reference
taking/releasing frequency.
- The 2 patch series "mm/hmm: A fix and a selftest" from Dev Jain does
as claimed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajQcWQAKCRDdBJ7gKXxA
jkjFAQD14ZCAS7c/lsNHPRpOARR2zrCJiIp+vhZDEx5V+d8u0QD+I4ca11CnQ+OA
dKCeabWWYuTR1GDtTHbLVCRfpGexBwM=
=cWPO
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
||
Joy Zou
|
fbef4191b4 |
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
The PMIC PCA9451A and PCA9452 have a default power-off debounce time of 2ms according to their datasheet, while PCA9450A and PCA9450BC use 120us. Add default_t_off_deb field to struct pca9450 to support per-variant default configuration when the device tree property is not specified. Datasheet reference links: - PCA9451A Rev.2.1: https://www.nxp.com/docs/en/data-sheet/PCA9451A.pdf - PCA9452 Rev.1.0: https://www.nxp.com/docs/en/data-sheet/PCA9452.pdf Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260618-b4-regulator-opt-v1-1-c43b1f62aaf6@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Changhuang Liang
|
914e708e30 |
spi: dw: Add support for snps,dwc-ssi-2.00a
Add a new compatible entry "snps,dwc-ssi-2.00a" for the Synopsys DesignWare SSI controller version 2.00a. This variant uses the same initialization routine as snps,dwc-ssi-1.01a (dw_spi_hssi_init). Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://patch.msgid.link/20260619143443.22267-3-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Changhuang Liang
|
07f251e0ed |
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
Add a new compatible string "starfive,jhb100-spi" for the StarFive JHB100 SPI, it based on the Synopsys DesignWare SSI version 2.00a, uses snps,dwc-ssi-2.00a as the primary fallback and snps,dwc-ssi-1.01a as the secondary fallback. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260619143443.22267-2-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Breno Leitao
|
4cc70f7585 |
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
hw_breakpoint_arch_parse() positions the BAS bit pattern in
hw->ctrl.len with
offset = hw->address & alignment_mask; /* 0..7 */
hw->ctrl.len <<= offset;
ctrl.len is an 8-bit bitfield (struct arch_hw_breakpoint_ctrl::len is
u32 :8), so the shift silently drops any bits past bit 7. For
non-compat AArch64 watchpoints the offset is unbounded relative to
ctrl.len: a perf_event_open(PERF_TYPE_BREAKPOINT) caller asking for
HW_BREAKPOINT_W with bp_addr=page+1 and bp_len=HW_BREAKPOINT_LEN_8
ends up with 0xff << 1 = 0x1fe, stored as 0xfe. The kernel programs
WCR.BAS=0xfe and the hardware watches bytes [1..7] instead of the
requested [1..8] -- the eighth byte is silently dropped. The
syscall still returns success, leaving userspace to discover the
gap by empirical probing.
The same class affects HW_BREAKPOINT_LEN_{2,4} when offset pushes the
high BAS bit past bit 7 (e.g. LEN_4 with offset=5 yields 0xe0
instead of 0x1e0). No memory-safety impact -- the value is masked
into 8 bits before encoding -- but debuggers and perf users observe
missed events on bytes they thought they were watching.
The AArch32 branch immediately above already rejects unrepresentable
(offset, len) combinations via an explicit switch. Mirror that for
the non-compat branch by checking that the shifted pattern fits in
the BAS field, returning -EINVAL when it does not.
GDB and similar debuggers are unaffected by the stricter check.
aarch64_linux_set_debug_regs() already treats EINVAL on
NT_ARM_HW_WATCH as a downgrade signal: it clears
kernel_supports_any_contiguous_range, calls aarch64_downgrade_regs()
to round the BAS up to a legacy 0x01/03/0f/ff mask with an aligned
base, and retries -- the same fallback path that PR-20207 introduced.
The new -EINVAL is therefore reachable only from a raw
perf_event_open() that pairs an unaligned base with an oversized
bp_len, which is precisely the bug.
Reproducer:
struct perf_event_attr a = {
.type = PERF_TYPE_BREAKPOINT, .size = sizeof(a),
.bp_type = HW_BREAKPOINT_W,
.bp_addr = (uintptr_t)(buf + 1),
.bp_len = HW_BREAKPOINT_LEN_8,
.exclude_kernel = 1, .exclude_hv = 1,
};
int fd = perf_event_open(&a, 0, -1, -1, 0);
/* before this fix: succeeds, watches 7 bytes (buf+1..buf+7) */
/* after this fix: fails with EINVAL */
Fixes:
|
||
|
Linus Torvalds
|
c98d767b34 |
Arm:
"This is a bit of an odd merge window on the KVM/arm64 front. There is
absolutely no new feature in the pull request. It is purely fixes,
because it is simply becoming too hard to review new stuff when so
many AI-fuelled fixes hit the list".
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX)
that caused the FPU load request.
- Some enhancements about interrupt injection.
- Some bug fixes and other small changes.
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes.
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace.
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root.
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both
of these are preparatory changes for upcoming APX support.
- Clean up KVM's register tracking and storage, primarily to prepare for
APX support, which expands the maximum number of GPRs from 16 to 32.
- Keep a single copy of the PDPTRs rather than two, since architecturally
there is just one.
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor code
gets a chance to handle things like reaping the PML buffer.
- Update KVM's view of PV async enabling if and only if the MSR write fully
succeeds.
- Fix a variety of issues where the emulator doesn't honor guest-debug state,
and clean up related code along the way.
- Synthesize EPT Violation and #NPF "error code" bits when injecting faults
into L1 that didn't originate in hardware (in which case the VMCS/VMCB
doesn't hold relevant information).
- Add support for virtualizing (well, emulating) AMD's flavor of CPL>0 CPUID
faulting.
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and fix a
variety of minor bugs along the way.
- Fix an OOB memory access due to not checking the VP ID when handling a
Hyper-V PV TLB flush for L2.
- Fix a bug in the mediated PMU's handling of fixed counters that allowed the
guest to bypass the PMU event filter.
- Allow userspace to return EAGAIN when handling SNP and TDX hypercalls, so
the KVM can forward a "retry" status code to the guest, and reserve all
unused error codes for future usage.
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific logic as
possible into the TDX code, and to funnel (almost) all S-EPT updates into
a single chokepoint. The motivation is largely to prepare for upcoming
Dynamic PAMT support, but the cleanups are nice to have on their own.
- Plug a hole in shadow page table handling, where KVM fails to recursively
zap nested EPT/NPT shadow page tables when the nested hypervisor tears
down its own EPT/NPT page tables from the bottom up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in the
generic section; also run with MBEC enabled even for non-nested mode.
- Use the kernel's "enum pg_level" in the TDX APIs instead of the TDX-Module's
level definitions (which are 0-based).
- Rework the TDX memory APIs to not require/assume that guest memory is
backed by "struct page" (in prepartion for guest_memfd hugepage support).
- Fix a largely benign bug where KVM TDX would incorrectly state it could
emulate several x2APIC MSRs.
- Use the "safe" WRMSR API when proxying LBR MSR writes as the to-be-written
value is guest controlled and completely unvalidated.
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in the
generic section; also run with GMET enabled even for non-nested mode.
- Fixes and minor cleanups to GHCB handling, on top of the earlier work
already merged into 7.1-rc.
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers.
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
- Don't advertise support for unusable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Use guard() to cleanup up various KVM+VFIO flows.
- Minor cleanups.
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a gmem
range to multiple memslots, and fix the test that was supposed to ensure
KVM returns -EEXIST.
- Treat memslot binding offsets and sizes as unsigned values to fix a bug
where KVM interprets a large "offset + size" as a negative value and allows
a nonsensical offset.
- Use the inode number instead of the page offset for the NUMA interleaving
index to fix a bug where the effective index would jump by two for
consecutive pages (the caller also adds in the page offset).
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the first
pass, as always waiting only 1ms hid a KVM RISC-V bug as the test reaped the
bitmap before KVM could build up enough state to hit the bug.
- A pile of one-off fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoypI0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCSAf8CyuvicojnZGFsNcoY4DZ0whBj5l8
IwVkHaptuyGLSwPAebC/DwtU2NBY4CQdbtLjGmxenf+fSQOtcz1YWKbdY4Nr0hJG
euAb/wO47RqKp1C4WPi7lL2P4XHgmUgD5XZ1qDnRV9gnGddZi3QLLmKgAtNq9Z4m
+pAdGD2/RyZeI0Dx61+5ufE/z8YBlH6GrzgBTxfvvRNKqNDFykBenxYHI7seEfHC
BPz0LxjHDD8BMDUo86qaylZnaeQSmFTGO/eTgvCvabxG6WbM1s0w3K1owmUmP7o3
p9o8274Xh53iK2JYD/qGOtAJXejIwbYKT5bnvUQX0O1EH2+ouvSFapLQ9Q==
=sSqM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
||
|
Linus Torvalds
|
08c7183f5b |
- use software nodes for GPIO code
- cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmo1JiIaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDNBQ//X28UvppTn3NQnbQRL4ba Na6HVSRiPMqIiCQ5b1kOYXYSAZtPW0Y+GU9X7NVNKJJJTUMbqTGpNgLCR9u7MyP9 me7uX+duscjZrSH3934/sOXm2xS2Z+JLI4O5GVWpB6hxXW2IiGdxw38mFyPtO4t/ Z+Lz4LZbn/MC8jGXZ1pNNEH2xF/dq8/nNpLqOqTZbehabsyKkZZN9uJ5JJYxL5Vh QsbWo8hYt/O3zuF/nb6e/kTulKNcDmSQzPyeeMrEQbbzSAcWtbMbFRce7qKPgWPv B0xkNJcSh5mDc5SD6LHGCmE4FG3jdgdPjTtvmW2UDYZYgndBeWW9knwDIEc4TL0j gVBXoXXygvv4GDtccfOxxaU0EiP1JiUfnrqci5cyzYG50gzKJb6cK9GsJBnbbXQ2 oKU5i/dmfRbePZH6vkm765Je+4x/lSQM44hR7DhSxnr6BQpBhARm8J5qrbi9eUdK ii2uaqn2raFvZ3NHSP7lqj/5HpHDRGeK9fsiHEQbOibYSTDQK4Urqc6nrcyt7+cA wG/xa6oqFozJKpMEQONcbW47skCIQc6QJckJlRHisAMsr82IGGZ5O+YlDjxJa31H +hyzgG1VuiVEgUrNaTvx9srECqN8OxWMa3kIgIx+DcTaMqr4vxM/fLTZcz+MfA4G Swnnt5PzxuFBUhQyqcyr6kU= =t5+n -----END PGP SIGNATURE----- Merge tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - use software nodes for GPIO code - cleanups and fixes * tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits) mips: select legacy gpiolib interfaces where used MIPS: lib: Remove '.hidden' for local symbols MIPS: VDSO: Avoid including .got in dynamic segment MIPS: smp: report dying CPU to RCU in stop_this_cpu() MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo() MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo() mips: sched: Fix CPUMASK_OFFSTACK memory corruption MIPS: mm: Fix out-of-bounds write in maar_res_walk() MIPS: ath79: reduce ARCH_DMA_MINALIGN mips: dts: ar9132: fix wdt node name mips: Remove remaining defconfig references to the pktcdvd driver MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP MIPS: alchemy: db1300: switch to static device properties MIPS: alchemy: gpr: switch to static device properties MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties MIPS: alchemy: mtx1: attach software nodes to GPIO chips MIPS: alchemy: provide visible function prototypes to board files MIPS: alchemy: platform: add missing include MIPS: ip22-gio: do not export device release function MIPS: ip22-gio: switch to dynamic root device ... |
||
|
Linus Torvalds
|
91981f96d2 |
powerpc updates for 7.2
- Enable GENERIC_ENTRY feature
- Add missing property in DTS for mpc83xx platform
- Enable building of DTB based on platfrom Kconfig
- Add powerpc64 JIT support for timed may_goto
- Add timeout to RTAS busy-wait loops
- Simplify cpumask api usage for cpuinfo display
- implement get_direction() in cpm1 (8xx platform)
- MAINTAINERS file update for power VMX AES entries
- Fixes to handle preempt count
- Restore KUAP registers on syscall restart exit
- define MIN_RMA in bytes rather than MB
- misc fixes and cleanups
Thanks to:
Aboorva Devarajan, Adriano Vero, Amit Machhiwal, Anushree Mathur, Bartosz
Golaszewski, Christophe Leroy (CS GROUP), David Gow, Jinjie Ruan, J.
Neuschäfer, Linus Walleij, Mahesh Salgaonkar, Mukesh Kumar Chaurasiya (IBM),
Ritesh Harjani (IBM), Saket Kumar Bhaskar, Samir M, Sayali Patil, Shirisha G,
Shivang Upadhyay, Shrikanth Hegde, Sourabh Jain, Thorsten Blum, Venkat Rao
Bagalkote, Yury Norov,
-----BEGIN PGP SIGNATURE-----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=hfAc
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Enable GENERIC_ENTRY feature
- Add missing property in DTS for mpc83xx platform
- Enable building of DTB based on platfrom Kconfig
- Add powerpc64 JIT support for timed may_goto
- Add timeout to RTAS busy-wait loops
- Simplify cpumask api usage for cpuinfo display
- implement get_direction() in cpm1 (8xx platform)
- MAINTAINERS file update for power VMX AES entries
- Fixes to handle preempt count
- Restore KUAP registers on syscall restart exit
- define MIN_RMA in bytes rather than MB
- misc fixes and cleanups
Thanks to Aboorva Devarajan, Adriano Vero, Amit Machhiwal, Anushree
Mathur, Bartosz Golaszewski, Christophe Leroy (CS GROUP), David Gow,
Jinjie Ruan, J. Neuschäfer, Linus Walleij, Mahesh Salgaonkar, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Saket Kumar Bhaskar,
Samir M, Sayali Patil, Shirisha G, Shivang Upadhyay, Shrikanth Hegde,
Sourabh Jain, Thorsten Blum, Venkat Rao Bagalkote, and Yury Norov.
* tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (32 commits)
powerpc/fadump: define MIN_RMA in bytes rather than MB
powerpc: Restore KUAP registers on syscall restart exit
powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus
powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
powerpc/boot: Allow text relocations for pseries wrapper with binutils 2.46+
powerpc: Simplify access_ok()
powerpc/entry: Disable interrupts before irqentry_exit
powerpc/8xx: implement get_direction() in cpm1
powerpc/pseries/lparcfg: Replace deprecated strcpy in parse_system_parameter_string
powerpc: Fix indentation and replace typedef with struct name
powerpc/rtas: Replace one-element array with flexible array member
powerpc: use sysfs_emit{_at} in sysfs show functions
MAINTAINERS: powerpc: update VMX AES entries
ppc/fadump: invoke kmsg_dump in fadump panic path
powerpc/xive: Add warning if target CPU not found
powerpc/perf: Use cpumask_intersects api for checking disable path
powerpc: Simplify cpumask api usage for cpuinfo display
powerpc: Use cpumask_next_wrap instead
powerpc/fadump: Add timeout to RTAS busy-wait loops
...
|
||
Arnd Bergmann
|
998d4d789d |
arm64: static_call: include asm/insns.h
I came a cross a missing declaration in a randconfig build:
arch/arm64/kernel/static_call.c:16:5: error: call to undeclared function 'aarch64_insn_adrp_get_offset'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
16 | aarch64_insn_adrp_get_offset(le32_to_cpup(tramp + 4)) +
| ^
Include the header that contains this definition explicitly,
rather than relying on it to come indirectly through another
header.
Fixes:
|
||
Holger Dengler
|
1ac287e2af |
s390/pkey: Check length in pkey_pckmo handler implementation
Explicitly check the length of the target buffer in the pkey_pckmo
implementation of the key_to_protkey() handler function. The handler
function fails, if the generated output data exceeds the length of the
provided target buffer.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Holger Dengler
|
b3d4ab2d7d |
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
Explicitly check the buffer length request structure provided by
user-space and fail, if it exceeds the buffer size.
Cc: stable@vger.kernel.org
Fixes:
|
||
Lorenzo Bianconi
|
f4c2d8668d |
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of
skb_header_pointer() to ensure the outer IPv6 header is in the skb
headroom, which is required for subsequent packet processing. Move
ctx->offset update inside the IPPROTO_IPV6 conditional block since it
should only be adjusted when an IP6IP6 tunnel is actually detected.
Simplify the rx path by removing ipv6_skip_exthdr() and checking
ip6h->nexthdr directly, as the flowtable fast path only handles simple
IP6IP6 encapsulation without extension headers.
Drop the tunnel encapsulation limit destination option support from the
tx path to match, since the rx path no longer handles extension headers.
Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(),
nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with
the ipv6_tel_txoption struct and related headroom/MTU adjustments.
Fixes:
|
||
Wyatt Feng
|
5feba91006 |
netfilter: xt_cluster: reject template conntracks in hash match
xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully
initialized conntrack and passes it to xt_cluster_hash().
This causes a state confusion bug when the raw table CT target attaches
a template conntrack to skb->_nfct before normal conntrack processing.
Templates carry IPS_TEMPLATE status but do not have a valid tuple for
hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the
zeroed l3num field.
Reject template conntracks before hashing them. This matches existing
netfilter handling for template objects and avoids hashing incomplete
conntrack state.
Fixes:
|
||
Haoze Xie
|
c9c9b37f8c |
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes:
|
||
Peter Zijlstra
|
e62d4192e5 |
perf: Fix addr_filter_ranges lifetime
Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed. Reported-by: Lee Jia Jie <jiajie.lee@starlabs.sg> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
Adrian Bente
|
53b3e60edb |
netfilter: flowtable: fix offloaded ct timeout never being extended
OpenWrt has recently migrated many platforms to kernel 6.18. On the
MediaTek platform, which supports hardware network offloading, WiFi
connections accelerated via the WED path were observed to drop after
roughly 300 seconds.
After several debugging sessions, assisted by the Claude LLM, the
problem was narrowed down as follows:
nf_flow_table_extend_ct_timeout() extends ct->timeout for offloaded
flows using:
cmpxchg(&ct->timeout, expires, new_timeout);
'expires' comes from nf_ct_expires(ct) and is a relative value, while
ct->timeout holds an absolute timestamp. The two are never equal, so
the cmpxchg always fails and the timeout is never extended.
This goes unnoticed for most flows, but a long-lived hardware (WED)
offloaded flow on MediaTek MT7986 eventually has ct->timeout decay to
zero, the conntrack entry is reaped and the connection breaks.
Open-code the relative value from a single READ_ONCE(ct->timeout)
snapshot and compare against that same absolute snapshot in the
cmpxchg, so the timeout extension actually takes effect while the
datapath remains authoritative if it updates ct->timeout concurrently.
Fixes:
|
||
Bartosz Golaszewski
|
442d60df74 |
x86/platform/geode: reference the real node of the cs5535 GPIO controller
GPIO software node lookup should rely exclusively on matching the addresses of the referenced firmware nodes. Commit |
||
|
Bartosz Golaszewski
|
9611c0ce21 |
Merge commit '6beaec3aee' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current
This pulls in the merge commit for MFD updates for v7.2. The PR contains a build-time dependency of one of the GPIO commits that will follow. |
||
Ramcharan Rajpurohit
|
f56521ab6f |
ALSA: hda/realtek: Enable mute LED on HP EliteBook 840 G6
The HP EliteBook 840 G6 (PCI SSID 103c:854d) has an ALC215 codec whose mic-mute and audio-mute LEDs are wired to the same GPIOs as the already supported EliteBook 830 G6 and 840 G7. Without a matching quirk the LEDs are never registered, so the front-panel mic-mute LED stays permanently lit and does not track the mute state. Apply ALC285_FIXUP_HP_GPIO_LED, mirroring the sibling EliteBook entries. With this fixup the codec registers an "hda::micmute" LED class device and the LED correctly follows the capture-mute state. This was verified on the affected machine by forcing the same fixup at runtime via snd_sof_intel_hda_generic.hda_model=103c:8548, which made the LED work as expected. Signed-off-by: Ramcharan Rajpurohit <b23ci1032@iitj.ac.in> Link: https://patch.msgid.link/20260619062435.26256-1-b23ci1032@iitj.ac.in Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Cen Zhang
|
f199c8a8bd |
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Fixes:
|
||
Alice Ryhl
|
191f49f1e3 |
rust: Kbuild: set frame-pointer llvm module flag for CONFIG_FRAME_POINTER
Due to a rustc bug, the -Cforce-frame-pointers=y flag only emits the frame-pointer annotation for functions, but not for the module. This means that functions generated by the LLVM backend such as 'asan.module_ctor' do not receive the frame-pointer annotation. This is likely to lead to broken backtraces and may also cause issues with ftrace if these features are used with functions generated by the LLVM backend. Thus, use -Zllvm_module_flag to work around this rustc bug if using a rustc without the fix. [ The fix [1] has landed for Rust 1.98.0 (expected release on 2026-08-20). - Miguel ] Cc: stable@vger.kernel.org # 6.12.y and later (flag not available in pinned Rust in older LTSs). Fixes: |
||
Gary Guo
|
ac4d1caa82 |
rust: doctest: fix incorrect pattern in replacement
The `-> Result<(), impl core::fmt::Debug>` string is generated by rustdoc
and by adding "::" into the string it no longer finds anything, making
the line useless.
Remove the "::" in the pattern. Omit it in the replacement too, for
consistency with upstream rustdoc.
Fixes:
|
||
|
Linus Torvalds
|
f32a375ecc |
RISC-V updates for v7.2
- Prevent get_free_mem_region() from returning regions that are
unmappable in certain circumstances by defining
DIRECT_MAP_PHYSMEM_END for RISC-V
- Fix an early boot problem with kexec_file when the amount of
installed physical memory installed on the system exceeds the direct
map size, which is possible in certain RISC-V virtual memory modes
- Unconditionally sfence.vma in the new vmalloc area handling code in
the page fault handler, since even the presence of Svvptc doesn't
guarantee that the CPU won't immediately fault again after the
exception handler completes and subsequently crash
- Fix ftrace_graph_ret_addr() to use the correct task pointer
(aligning with what other architectures do)
- Fix the misaligned access performance checking code in cases when
performance is specified on the kernel command line and when CPUs
have been brought offline and back online
- Get rid of a bogus address offset in the non-frame-pointer version
of walk_stackframe(), aligning it with the frame pointer-based code
- Fix a RISC-V kfence issue causing bogus use-after-free warnings
- Add ARCH_HAS_CC_CAN_LINK for RISC-V, which needs different compiler
command line flags than other architectures
- Implement _THIS_IP_ using RISC-V-specific assembly, which seems to
be less brittle (from a compiler point of view) than taking the
address of a label
- Reduce kernel startup overhead by defining
HAVE_BUILDTIME_MCOUNT_SORT, since arch/riscv meets all the
requirements
- Patch the CFI vDSO during alternatives processing, not only the
standard vDSO
- Fix a potential memory leak in the cacheinfo code
- Clean up kernel/setup.c:add_resource() to pass along the return
value from insert_resource() and to improve the display of
resource ranges
- Clean up our purgatory.[ch] by aligning our purgatory() prototype
to what's in arch/x86, and by cleaning up verify_sha256_digest()
- Clean up cpu_is_stopped() to align its function a little more
closely to its name
- Replace some unbounded string function usage in get_early_cmdline()
and the ptdump code with strscpy()
- Replace sprintf() with sysfs_emit() in cpu_show_ghostwrite() for
safer bounds checking
- Standardize how compiler output flags are specified in the RISC-V
kselftests, aligning them with what other architectures do
- Use the Linux-generic cmp_int() macro in place of an open-coded
"cmp_3way()" macro in kernel/module-sections.c
- Panic early in boot if IRQ handler stacks can't be allocated rather
than pretending to continue normally
- Add support for Eswin SoCs in the RISC-V defconfig
- Remove some unnecessary conditionals in sbi_hsm_hart_{start,stop}()
- Clean up some Kconfig infelicities found by Kconfirm
- Replace an open-coded version of min() in the kexec_elf code with
the standard min() function
-----BEGIN PGP SIGNATURE-----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=30S7
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Prevent get_free_mem_region() from returning regions that are
unmappable in certain circumstances by defining
DIRECT_MAP_PHYSMEM_END for RISC-V
- Fix an early boot problem with kexec_file when the amount of
installed physical memory installed on the system exceeds the direct
map size, which is possible in certain RISC-V virtual memory modes
- Unconditionally sfence.vma in the new vmalloc area handling code in
the page fault handler, since even the presence of Svvptc doesn't
guarantee that the CPU won't immediately fault again after the
exception handler completes and subsequently crash
- Fix ftrace_graph_ret_addr() to use the correct task pointer (aligning
with what other architectures do)
- Fix the misaligned access performance checking code in cases when
performance is specified on the kernel command line and when CPUs
have been brought offline and back online
- Get rid of a bogus address offset in the non-frame-pointer version of
walk_stackframe(), aligning it with the frame pointer-based code
- Fix a RISC-V kfence issue causing bogus use-after-free warnings
- Add ARCH_HAS_CC_CAN_LINK for RISC-V, which needs different compiler
command line flags than other architectures
- Implement _THIS_IP_ using RISC-V-specific assembly, which seems to be
less brittle (from a compiler point of view) than taking the address
of a label
- Reduce kernel startup overhead by defining
HAVE_BUILDTIME_MCOUNT_SORT, since arch/riscv meets all the
requirements
- Patch the CFI vDSO during alternatives processing, not only the
standard vDSO
- Fix a potential memory leak in the cacheinfo code
- Clean up kernel/setup.c:add_resource() to pass along the return value
from insert_resource() and to improve the display of resource ranges
- Clean up our purgatory.[ch] by aligning our purgatory() prototype to
what's in arch/x86, and by cleaning up verify_sha256_digest()
- Clean up cpu_is_stopped() to align its function a little more closely
to its name
- Replace some unbounded string function usage in get_early_cmdline()
and the ptdump code with strscpy()
- Replace sprintf() with sysfs_emit() in cpu_show_ghostwrite() for
safer bounds checking
- Standardize how compiler output flags are specified in the RISC-V
kselftests, aligning them with what other architectures do
- Use the Linux-generic cmp_int() macro in place of an open-coded
"cmp_3way()" macro in kernel/module-sections.c
- Panic early in boot if IRQ handler stacks can't be allocated rather
than pretending to continue normally
- Add support for Eswin SoCs in the RISC-V defconfig
- Remove some unnecessary conditionals in sbi_hsm_hart_{start,stop}()
- Clean up some Kconfig infelicities found by Kconfirm
- Replace an open-coded version of min() in the kexec_elf code with
the standard min() function
* tag 'riscv-for-linus-7.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
riscv: traps_misaligned: Avoid redundant unaligned access speed probe
riscv: misaligned: Fix fast_unaligned_access_speed_key init
riscv: also select ARCH_KEEP_MEMBLOCK if kexec is selected
riscv: alternative: Also patch the CFI vDSO
riscv: alternative: Pass vDSO start as parameter to apply_vdso_alternatives()
riscv: alternative: Use IS_ENABLED() over ifdeffery for apply_vdso_alternatives()
riscv: vdso: Always declare vdso_start symbols
riscv: kexec: use min to simplify riscv_kexec_elf_load
riscv: panic if IRQ handler stacks cannot be allocated
riscv: mm: Unconditionally sfence.vma for spurious fault
riscv: mm: Use the bitmap API for new_valid_map_cpus
riscv: mm: Rename new_vmalloc into new_valid_map_cpus
riscv: kfence: Call mark_new_valid_map() for kfence_unprotect()
riscv: mm: Extract helper mark_new_valid_map()
riscv: stacktrace: Remove bogus -0x4 offset in non-FP walk_stackframe
riscv: cacheinfo: Fix node reference leak in populate_cache_leaves
riscv: kexec_file: Constrain segment placement to direct map
riscv: mm: Define DIRECT_MAP_PHYSMEM_END
riscv: defconfig: Enable Eswin SoCs
riscv: cpu_ops_sbi: No need to be bothered to check ret.error
...
|
||
|
Linus Torvalds
|
9ecfb2f728 |
ring-buffer: Updates for v7.2:
- Do not invalidate entire buffer for invalid sub-buffers For the persistent ring buffer, if one sub-buffer is found to be invalid, it invalidates the entire per CPU ring buffer. This can lose a lot of valuable data if there's some corruption with the writes to the buffer not syncing properly on a hard crash. Instead, if a sub-buffer is found to be invalid, simply zero it out and mark it for "missed events". When the persistent ring buffer is read and a sub-buffer that was cleared due to being invalid on boot up is discovered, the output will show "[LOST EVENTS]" to let the user know that events were missing at that location. Displaying the events from valid buffers can still be useful. - Add a test to be able to test corrupted sub-buffers If a persistent ring buffer is created as "ptraingtest" and the new config that adds the test is enabled, when a panic happens, the kernel will randomly corrupt one of the per CPU ring buffers. On boot up, the sub-buffers with the corruption should be cleared and flagged. When reading this buffer, the missed events should should [LOST EVENTS]. - Add commit number in the sub-buffer meta debug info The commit is used to know the content of a meta page. Add it to the buffer_meta file that is shown for each per CPU buffer. - Clean up the persistent ring buffer validation code Add some helper functions and make variable names more consistent. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCajMDZBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qhDLAP4i0b8HP159LOEy/IiQKZ7hfAaUhTK8 imMVS6V1bVKTjgD8Dy/f9m8259ZIcgN9mjSKXlT30qAeGmhjjDCdc0TnagM= =mokF -----END PGP SIGNATURE----- Merge tag 'trace-ring-buffer-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ring-buffer updates from Steven Rostedt - Do not invalidate entire buffer for invalid sub-buffers For the persistent ring buffer, if one sub-buffer is found to be invalid, it invalidates the entire per CPU ring buffer. This can lose a lot of valuable data if there's some corruption with the writes to the buffer not syncing properly on a hard crash. Instead, if a sub-buffer is found to be invalid, simply zero it out and mark it for "missed events". When the persistent ring buffer is read and a sub-buffer that was cleared due to being invalid on boot up is discovered, the output will show "[LOST EVENTS]" to let the user know that events were missing at that location. Displaying the events from valid buffers can still be useful. - Add a test to be able to test corrupted sub-buffers If a persistent ring buffer is created as "ptraingtest" and the new config that adds the test is enabled, when a panic happens, the kernel will randomly corrupt one of the per CPU ring buffers. On boot up, the sub-buffers with the corruption should be cleared and flagged. When reading this buffer, the missed events should should [LOST EVENTS]. - Add commit number in the sub-buffer meta debug info The commit is used to know the content of a meta page. Add it to the buffer_meta file that is shown for each per CPU buffer. - Clean up the persistent ring buffer validation code Add some helper functions and make variable names more consistent. * tag 'trace-ring-buffer-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Better comment the use of RB_MISSED_EVENTS ring-buffer: Show persistent buffer dropped events in trace_pipe file ring-buffer: Show persistent buffer dropped events in trace file ring-buffer: Have dropped subbuffers be persistent across reboots ring-buffer: Cleanup buffer_data_page related code ring-buffer: Cleanup persistent ring buffer validation ring-buffer: Show commit numbers in buffer_meta file ring-buffer: Add persistent ring buffer invalid-page inject test ring-buffer: Skip invalid sub-buffers when rewinding persistent ring buffer ring-buffer: Skip invalid sub-buffers when validating persistent ring buffer |
||
|
Linus Torvalds
|
23b5d045ae |
tracing: Updates for v7.2:
- Remove a redundant IS_ERR() check trace_pipe_open() already checks for IS_ERR() and does it again in the return path. Remove the return check. - Export seq_buf_putmem_hex() to allow kunit tests against them To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported. - Replace strcat() and strcpy() with seq_buf() logic The code for synthetic events uses a series of strcat() and strcpy() which can be error prone. Replace them with seq_buf() logic that does all the necessary bound checking. - Add a lockdep rcu_is_watching() to trace_##event##_enabled() call The trace_##event##_enabled() is a static branch that is true if the "event" is enabled. But this can hide bugs if this logic is in a location where RCU is disabled and not "watching". It would only trigger if lockdep is enabled and the event is enabled. Add a "rcu_is_watching()" warning if lockdep is enabled in that helper function to trigger regardless if the event is enabled or not. - Remove the local variable in the trace_printk() macro For name space integrity, remove the _______STR variable in the trace_printk() macro for using the sizeof() macro directly. - Use guard()s for the trace_recursion_record.c file - Fix typo in a comment of eventfs_callback() kerneldoc - Use trace_call__##event() in events called within trace_##event##_enabled() A couple of events are called within an if block guarded by trace_##event##_enabled(). That is a static key that is only enabled when the event is enabled. The trace_call_##event() calls the tracepoint code directly without adding a redundant static key for that check. - Allow perf to read synthetic events Currently, perf does not have the ability to enable a synthetic event. If it does, it will either cause a kernel warning or error with "No such device". Synthetic events are not much different than kprobes and perf can handle fine with a few modifications. - Replace printk(KERN_WARNING ...) with pr_warn() - Replace krealloc() on an array with krealloc_array() - Fix README file path name for synthetic events - Change tracing_map tracing_map_array to use a flexible array Instead of allocating a separate pointer to hold the pages field of tracing_map_array, allocate the pages field as a flexible array when allocating the structure. - Fold trace_iterator_increment() into trace_find_next_entry_inc() The function trace_iterator_increment() was only used by trace_find_next_entry_inc(). It's not big enough to be a helper function for one user. Fold it into its caller. - Make field_var_str field a flexible array of hist_elt_data Instead of allocating a separate pointer for the field_var_str array of the hist_elt_data structure, allocate it as a flexible array when allocating the structure. - Disable KCOV for trace_irqsoff.c Like trace_preemptirq.c, trace_irqsoff.c has code that will crash when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM because the irqsoff tracing code can be run from early interrupt code and produce coverage unrelated to syscall inputs. - Fix warning in __unregister_ftrace_function() called by perf Perf calls unregister_ftrace_function() without checking if its ftrace_ops has already been unregistered. There's an error path where on clean up it will unregister the ftrace_ops even if it wasn't registered and causes a warning. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCajHGbRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqP/AP4nv/Tmv6T7vxMzL7dY/WJ0xT2xkW7Z tlejy1AM/RBaTAEAkkgdDNhIAJwxCxsmY6/Zr1mRWzaF7O4kX94KYFcBHww= =7nyZ -----END PGP SIGNATURE----- Merge tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Remove a redundant IS_ERR() check trace_pipe_open() already checks for IS_ERR() and does it again in the return path. Remove the return check. - Export seq_buf_putmem_hex() to allow kunit tests against them To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported. - Replace strcat() and strcpy() with seq_buf() logic The code for synthetic events uses a series of strcat() and strcpy() which can be error prone. Replace them with seq_buf() logic that does all the necessary bound checking. - Add a lockdep rcu_is_watching() to trace_##event##_enabled() call The trace_##event##_enabled() is a static branch that is true if the "event" is enabled. But this can hide bugs if this logic is in a location where RCU is disabled and not "watching". It would only trigger if lockdep is enabled and the event is enabled. Add a "rcu_is_watching()" warning if lockdep is enabled in that helper function to trigger regardless if the event is enabled or not. - Remove the local variable in the trace_printk() macro For name space integrity, remove the _______STR variable in the trace_printk() macro for using the sizeof() macro directly. - Use guard()s for the trace_recursion_record.c file - Fix typo in a comment of eventfs_callback() kerneldoc - Use trace_call__##event() in events within trace_##event##_enabled() A couple of events are called within an if block guarded by trace_##event##_enabled(). That is a static key that is only enabled when the event is enabled. The trace_call_##event() calls the tracepoint code directly without adding a redundant static key for that check. - Allow perf to read synthetic events Currently, perf does not have the ability to enable a synthetic event. If it does, it will either cause a kernel warning or error with "No such device". Synthetic events are not much different than kprobes and perf can handle fine with a few modifications. - Replace printk(KERN_WARNING ...) with pr_warn() - Replace krealloc() on an array with krealloc_array() - Fix README file path name for synthetic events - Change tracing_map tracing_map_array to use a flexible array Instead of allocating a separate pointer to hold the pages field of tracing_map_array, allocate the pages field as a flexible array when allocating the structure. - Fold trace_iterator_increment() into trace_find_next_entry_inc() The function trace_iterator_increment() was only used by trace_find_next_entry_inc(). It's not big enough to be a helper function for one user. Fold it into its caller. - Make field_var_str field a flexible array of hist_elt_data Instead of allocating a separate pointer for the field_var_str array of the hist_elt_data structure, allocate it as a flexible array when allocating the structure. - Disable KCOV for trace_irqsoff.c Like trace_preemptirq.c, trace_irqsoff.c has code that will crash when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM because the irqsoff tracing code can be run from early interrupt code and produce coverage unrelated to syscall inputs. - Fix warning in __unregister_ftrace_function() called by perf Perf calls unregister_ftrace_function() without checking if its ftrace_ops has already been unregistered. There's an error path where on clean up it will unregister the ftrace_ops even if it wasn't registered and causes a warning. * tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: perf/ftrace: Fix WARNING in __unregister_ftrace_function tracing: Disable KCOV instrumentation for trace_irqsoff.o tracing: Turn hist_elt_data field_var_str into a flexible array tracing: Move trace_iterator_increment() into trace_find_next_entry_inc() tracing: Simplify pages allocation for tracing_map logic tracing: Fix README path for synthetic_events tracing: Use krealloc_array() for trace option array growth tracing/branch: Use pr_warn() instead of printk(KERN_WARNING) tracing: Allow perf to read synthetic events HID: Use trace_call__##name() at guarded tracepoint call sites cpufreq: amd-pstate: Use trace_call__##name() at guarded tracepoint call site tracefs: Fix typo in a comment of eventfs_callback() kerneldoc tracing: Switch trace_recursion_record.c code over to use guard() tracing: Remove local variable for argument detection from trace_printk() tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled() tracing: Bound synthetic-field strings with seq_buf seq_buf: Export seq_buf_putmem_hex() and add KUnit tests tracing: Remove redundant IS_ERR() check in trace_pipe_open() |
||
Daniel Zahka
|
96e7f9122a |
eth: fbnic: take netif_addr_lock_bh() around rx mode address programming
When __fbnic_set_rx_mode() is called from contexts other than
.ndo_set_rx_mode_async(), the uc and mc addr lists are accessed
without the addr lock that __hw_addr_sync_dev() and
__hw_addr_unsync_dev() require. Wrap these unprotected accesses with
netif_addr_lock_bh(). fbnic_clear_rx_mode() has similar issues.
Fixes:
|
||
Doruk Tan Ozturk
|
bda3348872 |
tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit |
||
Michael Bommarito
|
e5c0002327 |
net: rds: check cmsg_len before reading rds_rdma_args in size pass
rds_rm_size() handles RDS_CMSG_RDMA_ARGS after only CMSG_OK() and then calls rds_rdma_extra_size(), which reads args->local_vec_addr and args->nr_local without first checking that cmsg_len covers struct rds_rdma_args. The other two RDS_CMSG_RDMA_ARGS consumers already guard this: rds_rdma_bytes() in rds_sendmsg() and rds_cmsg_rdma_args() in rds_cmsg_send() both reject cmsg_len < CMSG_LEN(sizeof(struct rds_rdma_args)). Add the same check to rds_rm_size() so all three RDMA args passes are consistent. This is a consistency and hardening change with no behavioral effect for well-formed senders and no reachable bug today: rds_rdma_bytes() runs before rds_rm_size() in rds_sendmsg() and already rejects a short RDS_CMSG_RDMA_ARGS, so the size pass is not reached with an undersized cmsg. But rds_rm_size() reads the args independently of that earlier pass, and nothing in rds_rm_size() itself records or enforces the precondition, so a reader or a future refactor of the size pass cannot tell the cmsg has already been length-checked. Applying the same cmsg_len guard in all three RDS_CMSG_RDMA_ARGS consumers keeps that invariant local to each and robust to reordering. Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260617023146.2780077-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Ross Porter
|
b8613e9792 |
selftests: net: fix file owner for broadcast_ether_dst test
Ensure the output file is always owned by root (even if tcpdump was
compiled with `--with-user`), by passing the `-Z root` argument when
invoking it.
Cc: stable@vger.kernel.org
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/2129815
Fixes:
|
||
Rongguang Wei
|
0ec4b78598 |
net: wangxun: don't advertise IFF_SUPP_NOFCS
Like commit a24162f18825("i40e: don't advertise IFF_SUPP_NOFCS"),
ngbe and txgbe also advertises IFF_SUPP_NOFCS and allowing users
to use the SO_NOFCS socket option. But the driver does not check
skb->no_fcs, so this option is silently ignored.
With this change, send() fails with -EPROTONOSUPPORT when AF_PACKET
socket is set SO_NOFCS option.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Link: https://patch.msgid.link/20260617092854.133992-1-clementwei90@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Ido Schimmel
|
4045f1c3d6 |
selftests: vlan_bridge_binding: Fix flaky operational state check
check_operstate() busy waits for up to one second for the operational
state to change to the expected state. This is not enough since carrier
loss events can be delayed by the kernel for up to one second (see
__linkwatch_run_queue()), leading to sporadic failures.
Fix by increasing the busy wait period to two seconds.
Fixes:
|
||
Dawei Feng
|
1bd6676254 |
net: ena: clean up XDP TX queues when regular TX setup fails
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed.
Fixes:
|
||
Ankit Garg
|
d676c9a73b |
gve: fix header buffer corruption with header-split and HW-GRO
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing.
Cc: stable@vger.kernel.org
Fixes:
|
||
Maoyi Xie
|
55d9895f89 |
net: thunderbolt: Fix frags[] overflow by bounding frame_count
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example |
||
|
Breno Leitao
|
c0ebe49232 |
netconsole: don't drop the last byte of a full-sized message
nt->buf is exactly MAX_PRINT_CHUNK bytes, but scnprintf() reserves one
byte for its NUL terminator, so a non-fragmented payload of exactly
MAX_PRINT_CHUNK loses its last byte (emitted as a stray NUL in the
release path). Grow nt->buf to MAX_PRINT_CHUNK + 1 and bound the
scnprintf() calls with sizeof(nt->buf); the transmitted length stays
capped at MAX_PRINT_CHUNK.
Alternatively, nt->buf could be left at MAX_PRINT_CHUNK and the NUL byte
reserved by routing exactly-MAX_PRINT_CHUNK payloads to fragmentation
('len < MAX_PRINT_CHUNK'), at the cost of fragmenting those messages.
But it would look less sane, thus the current approach.
Fixes:
|
||
Yun Zhou
|
bf6e8af2c8 |
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter.
Reported-by: syzbot+fa2f5b1fb06147be5e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa2f5b1fb06147be5e16
Fixes:
|
||
Lukasz Raczylo
|
e438ec3e9e |
net: macb: add TX stall timeout callback to recover from lost TSTART write
The MACB found in the Raspberry Pi RP1 suffers from sporadic stalls on
the TX queue.
While the exact root cause is not yet fully understood, it is likely
related to a hardware issue where a TSTART write to the NCR register
is missed, preventing the transmission from being kicked off.
Implement a timeout callback to handle TX queue stalls, triggering the
existing restart mechanism to recover.
Link: https://lore.kernel.org/all/20260514215459.36109-1-lukasz@raczylo.com/
Fixes:
|
||
Wayen Yan
|
5c121ee635 |
net: airoha: fix foe_check_time allocation size
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash.
Fixes:
|
||
Jakub Kicinski
|
440a974492 |
Merge branch 'devlink-fix-a-couple-parent-ref-leaks'
Cosmin Ratiu says: ==================== devlink: Fix a couple parent ref leaks These two patches fix parent ref leaks on errors. ==================== Link: https://patch.msgid.link/20260616110633.1449432-1-cratiu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Cosmin Ratiu
|
ba81a8b80f |
devlink: Fix parent ref leak on tc-bw failure
When a node is created via rate-new with tc-bw and a parent node,
devlink_nl_rate_set() executes the sequence of ops. It bails out on the
first failure and doesn't rollback anything. For most things that is
fine (setting some numbers), but the parent set can leak if there's
another failure after that.
That is precisely what happens when parent setting isn't the last block
in the function. After the referenced "Fixes" commit, when tc-bw fails
to be set the function bails out after having set the parent and
incremented its refcount.
There are two callers:
- devlink_nl_rate_set_doit() is fine, it just reports the error.
- but devlink_nl_rate_new_doit() frees the newly created node and leaks
the parent refcnt.
Fix that by reordering the blocks so parent setting is last and adding a
comment explaining this so future modification preserve the ordering
(hopefully).
Fixes:
|
||
|
Cosmin Ratiu
|
ba45106342 |
devlink: Fix parent ref leak in devl_rate_node_create()
In the original commit the function bails out on kstrdup failure,
forgetting to decrement the refcnt of the parent.
Fix that by moving the parent refcnt setting after kstrdup.
Fixes:
|
||
Junrui Luo
|
8cdcf3d2ca |
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes:
|
||
Ruoyu Wang
|
a0aa6bf985 |
net: pch_gbe: handle TX skb allocation failure
pch_gbe_alloc_tx_buffers() allocates an skb for each TX descriptor and
then passes the returned pointer to skb_reserve(). If netdev_alloc_skb()
fails, skb_reserve() dereferences NULL.
Make pch_gbe_alloc_tx_buffers() return an error when an skb allocation
fails. On failure, let pch_gbe_alloc_tx_buffers() clean the partially
allocated TX ring before returning the error. While bringing the device
up, release the RX buffer pool through a shared cleanup helper before
unwinding the IRQ setup.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Fixes:
|
||
Wentao Guan
|
d31deeab70 |
net: llc: make empty have static storage duration
Make @empty have static storage duration (like net/sysctl_net.c does) to avoid storing a bad pointer, and keep consistent with __register_sysctl_table @table 'should not be free'd after registration'. Note that this is _not_ a bug, since size is 0 the pointer will never get deferenced. Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260616064053.690154-1-guanwentao@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Ioana Ciornei
|
ed2294f94e |
dpaa2-switch: fix VLAN upper check not rejecting bridge join
The blamed commit refactored the prechangeupper event handling but
failed to actually return an error in case
dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper
on a port which tries to join a bridge. Fix this by returning err
instead of 0.
Fixes:
|
||
Xiang Mei
|
9e5ad06ea8 |
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised.
Fixes:
|
||
|
Jakub Kicinski
|
86590e2a22 |
Merge branch 'net-sched-act_ct-preserve-tc_skb_cb-across-defragmentation'
Zihan Xi says: ==================== net/sched: act_ct: preserve tc_skb_cb across defragmentation ==================== Link: https://patch.msgid.link/cover.1781358691.git.xizh2024@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Zihan Xi
|
1fd8f80a19 |
selftests/tc-testing: act_ct: add TDC test for skb cb preservation across defrag
Add a tc-testing case that sends IPv4 fragments through act_ct on clsact egress while a root prio qdisc is present on the transmit path. The test verifies that packet processing and qdisc accounting continue to work after conntrack defragmentation, covering tc_skb_cb preservation across defragmentation. Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/53493549fdbcb2de25788b7894c56baadbc5fede.1781358692.git.xizh2024@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Zihan Xi
|
9092e15def |
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments().
Fixes:
|
||
|
Linus Torvalds
|
8c13415c8a |
[GIT PULL for v7.2] media updates
-----BEGIN PGP SIGNATURE-----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=Br7k
-----END PGP SIGNATURE-----
Merge tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|