Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached.
Fixes: 1b0a3950db ("eth: fbnic: Add XDP pass, drop, abort support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
Two recent cleanup patches that were not supposed to change anything
broke the core_id code needed for AMD RAPL initialization:
commit 070e92361e ("tools/power turbostat: Enhance HT enumeration")
commit ddf60e38ca ("tools/power turbostat: Simplify global core_id calculation")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The (struct vnic_dev).linkstatus buffer is freed in svnic_dev_unregister()
and referenced in svnic_dev_link_status() but never alloc'd. This means
(struct vnic_dev).linkstatus is always null and the dealloc the reference
in svnic_dev_link_status() is dead code.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260216141056.59429-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
Fixes: e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260213192806.439432-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensures that UFS Runtime PM can achieve power saving after System PM
suspend by resetting hba->urgent_bkops_lvl. Also modify the
ufshcd_bkops_exception_event_handler to avoid setting urgent_bkops_lvl when
status is 0, which helps maintain optimal power management.
On UFS devices supporting UFSHCD_CAP_AUTO_BKOPS_SUSPEND, a BKOPS exception
event can lead to a situation where UFS Runtime PM can't enter low-power
mode states even after the BKOPS exception has been resolved.
BKOPS exception with bkops status 0 occurs, the driver logs:
"ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 0"
When a BKOPS exception occurs, ufshcd_bkops_exception_event_handler() reads
the BKOPS status and sets hba->urgent_bkops_lvl to BKOPS_STATUS_NO_OP(0).
This allows the device to perform Runtime PM without changing the UFS power
mode. (__ufshcd_wl_suspend(hba, UFS_RUNTIME_PM))
During system PM suspend, ufshcd_disable_auto_bkops() is called, disabling
auto bkops. After UFS System PM Resume, when runtime PM attempts to suspend
again, ufshcd_urgent_bkops() is invoked. Since hba->urgent_bkops_lvl
remains at BKOPS_STATUS_NO_OP(0), ufshcd_enable_auto_bkops() is triggered.
However, in ufshcd_bkops_ctrl(), the driver compares the current BKOPS
status with hba->urgent_bkops_lvl, and only enables auto bkops if
curr_status >= hba->urgent_bkops_lvl. Since both values are 0, the
condition is met
As a result, __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM) skips power mode
transitions and remains in an active state, preventing power saving even
though no urgent BKOPS condition exists.
Signed-off-by: Won Jung <wone.jung@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/1891546521.01770806581968.JavaMail.epsvc@epcpadp2new
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Older UFS spec devices (2.2 and earlier) do not expose per-region RPMB
sizes, as only one RPMB region is supported. In such cases, the size of the
single RPMB region can be deduced from the Logical Block Count and Logical
Block Size fields in the RPMB Unit Descriptor.
Add a fallback mechanism to calculate the RPMB region size from these
fields if the device implements an older spec, so that the RPMB driver can
work with such devices - otherwise it silently skips the whole RPMB.
Section 14.1.4.6 (RPMB Unit Descriptor)
Link: https://www.jedec.org/system/files/docs/JESD220C-2_2.pdf
Cc: stable@vger.kernel.org
Fixes: b06b8c4214 ("scsi: ufs: core: Add OP-TEE based RPMB driver for UFS devices")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260209-ufs-rpmb-v3-1-b1804e71bd38@flipper.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current GT statistics use atomic64_t counters. Atomic operations incur
a global coherency penalty.
Transition to dynamic per-cpu counters using alloc_percpu(). This allows
stats to be incremented via this_cpu_add(), which compiles to a single
non-locking instruction. This approach keeps the hot-path updates local
to the CPU, avoiding expensive cross-core cache invalidation traffic.
Use for_each_possible_cpu() during aggregation and clear operations to
ensure data consistency across CPU hotplug events.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260217200552.596718-1-matthew.brost@intel.com
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 38a6f08657 ("net: sched: support hash selecting tx queue")
added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is
computed as:
mapping_mod = queue_mapping_max - queue_mapping + 1;
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
queue_mapping += skb_get_hash(skb) % params->mapping_mod;
Compute mapping_mod in a wider type and reject ranges larger than U16_MAX
to prevent params->mapping_mod from becoming 0 and avoid the crash.
Fixes: 38a6f08657 ("net: sched: support hash selecting tx queue")
Cc: stable@vger.kernel.org # 6.12+
Signed-off-by: Ruitong Liu <cnitlrt@gmail.com>
Link: https://patch.msgid.link/20260213175948.1505257-1-cnitlrt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation for the vsock per-namespace sysctls (`ns_mode` and
`child_ns_mode`) to Documentation/admin-guide/sysctl/net.rst.
These sysctls were introduced by commit eafb64f40c ("vsock: add
netns to vsock core").
Document the two namespace modes (`global` and `local`), the
inheritance behavior of `child_ns_mode`, and the restriction preventing
local namespaces from setting `child_ns_mode` to `global`.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260216163147.236844-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dma_free_coherent() in error path takes priv->rx_buf.alloc_len as
the dma handle. This would lead to improper unmapping of the buffer.
Change the dma handle to priv->rx_buf.alloc_phys.
Fixes: 6af55ff52b ("Driver for Beckhoff CX5020 EtherCAT master module.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260213164340.77272-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
kasan_report (mm/kasan/report.c:597)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
? tasklet_init (kernel/softirq.c:983)
macvlan_handle_frame (drivers/net/macvlan.c:501)
Allocated by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
__kasan_kmalloc (mm/kasan/common.c:419)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657
mm/slub.c:7140)
alloc_netdev_mqs (net/core/dev.c:12012)
rtnl_create_link (net/core/rtnetlink.c:3648)
rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Freed by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kfree (mm/slub.c:6674 mm/slub.c:6882)
rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Fixes: f8db6475a8 ("macvlan: fix error recovery in macvlan_common_newlink()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Link: https://patch.msgid.link/20260213142557.3059043-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred
^^^^^^^^^
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
Fixes: ca22da2fbd ("act_mirred: use the backlog for nested calls to mirred ingress")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a recommendation from RFC 8981 and it was intended to be changed
by commit 969c54646a ("ipv6: Implement draft-ietf-6man-rfc4941bis")
but it only changed the sysctl documentation.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260214172543.5783-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
isk->inet_num, isk->inet_rcv_saddr and sk->sk_bound_dev_if
are read locklessly in ping_lookup().
Add READ_ONCE()/WRITE_ONCE() annotations.
The race on isk->inet_rcv_saddr is probably coming from IPv6 support,
but does not deserve a specific backport.
Fixes: dbca1596bb ("ping: convert to RCU lookups, get rid of rwlock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216100149.3319315-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The newly added dsa driver attempts to enable the corresponding PHY driver,
but that one has additional dependencies that may not be available:
WARNING: unmet direct dependencies detected for MAXLINEAR_GPHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && (HWMON [=m] || HWMON [=m]=n [=n])
Selected by [y]:
- NET_DSA_MXL862 [=y] && NETDEVICES [=y] && NET_DSA [=y]
aarch64-linux-ld: drivers/net/phy/mxl-gpy.o: in function `gpy_probe':
mxl-gpy.c:(.text.gpy_probe+0x13c): undefined reference to `devm_hwmon_device_register_with_info'
aarch64-linux-ld: drivers/net/phy/mxl-gpy.o: in function `gpy_hwmon_read':
mxl-gpy.c:(.text.gpy_hwmon_read+0x48): undefined reference to `polynomial_calc'
There is actually no compile-time dependency, as DSA correctly uses the
PHY abstractions. Remove the 'select' statement to reduce the complexity.
Fixes: 23794bec1c ("net: dsa: add basic initial driver for MxL862xx switches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260216105522.2382373-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The frequency for an input reference is computed as:
frequency = freq_base * freq_mult * freq_ratio_m / freq_ratio_n
Before commit 5bc02b190a ("dpll: zl3073x: Cache all reference
properties in zl3073x_ref"), zl3073x_dpll_input_pin_frequency_set()
explicitly wrote 1 to both the REF_RATIO_M and REF_RATIO_N hardware
registers whenever a new frequency was set. This ensured the FEC ratio
was always reset to 1:1 alongside the new base/multiplier values.
The refactoring in that commit introduced zl3073x_ref_freq_set() to
update the cached ref state, but this helper only sets freq_base and
freq_mult without resetting freq_ratio_m and freq_ratio_n to 1. Because
zl3073x_ref_state_set() uses a compare-and-write strategy, unchanged
ratio fields are never written to the hardware. If the device previously
had non-unity FEC ratio values, they remain in effect after a frequency
change, resulting in an incorrect computed frequency.
Explicitly set freq_ratio_m and freq_ratio_n to 1 in zl3073x_ref_freq_set()
to restore the original behavior.
Fixes: 5bc02b190a ("dpll: zl3073x: Cache all reference properties in zl3073x_ref")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260216194007.680416-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit, TCP tx zero copy notifications could be
arbitrarily delayed and cause regressions in applications waiting
for them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: e20dfbad8a ("net: fix napi_consume_skb() with alien skbs")
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260216193653.627617-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp now uses skb extensions, failing to build when that is disabled:
In file included from include/net/psp.h:7,
from net/psp/psp_sock.c:9:
include/net/psp/functions.h: In function '__psp_skb_coalesce_diff':
include/net/psp/functions.h:60:13: error: implicit declaration of function 'skb_ext_find'; did you mean 'skb_ext_copy'? [-Wimplicit-function-declaration]
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~~
| skb_ext_copy
include/net/psp/functions.h:60:31: error: 'SKB_EXT_PSP' undeclared (first use in this function)
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~
include/net/psp/functions.h:60:31: note: each undeclared identifier is reported only once for each function it appears in
include/net/psp/functions.h: In function '__psp_sk_rx_policy_check':
include/net/psp/functions.h:94:53: error: 'SKB_EXT_PSP' undeclared (first use in this function)
94 | struct psp_skb_ext *pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
net/psp/psp_sock.c: In function 'psp_sock_recv_queue_check':
net/psp/psp_sock.c:164:41: error: 'SKB_EXT_PSP' undeclared (first use in this function)
164 | pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
Select the Kconfig symbol as we do from its other users.
Fixes: 6b46ca260e ("net: psp: add socket security association code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260216105500.2382181-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink requires that the recv buffer used during dumps is at least
min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will
get truncated. Make sure bpftool follows this requirement, avoid
missing information on systems with large pages.
Acked-by: Quentin Monnet <qmo@kernel.org>
Fixes: 7084566a23 ("tools/bpftool: Remove libbpf_internal.h usage in bpftool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20260217194150.734701-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is unlikely that this function will be ever called
with isk->inet_num being not zero.
Perform the check on isk->inet_num inside the locked section
for complete safety.
Fixes: 9b115749ac ("ipv6: add ip6_sock_set_v6only")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260216102202.3343588-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skip creating CCS sysfs files in VF mode to ensure VFs do not
try to change CCS mode, as it is predefined and immutable in
the SR-IOV mode.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Nareshkumar Gollakoti <naresh.kumar.g@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260202170810.1393147-5-naresh.kumar.g@intel.com
(cherry picked from commit 4e8f602ac3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the unnecessary VRAM channel entry introduced in xe_hwmon_channel.
Without this, adding any new hwmon channel causes extra VRAM channel
to appear. This remained unnoticed earlier because VRAM was the
final xe hwmon channel.
v2: Use MAX_VRAM_CHANNELS with in_range() instead of
CHANNEL_VRAM_N_MAX. (Raag)
Fixes: 49a4983384 ("drm/xe/hwmon: Expose individual VRAM channel temperature")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260206081655.2115439-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 48eb073c7d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Fixes: 2df55d9e66 ("drm/xe: Support pcie p2p dma as a fast interconnect")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260216134644.1025365-1-arnd@kernel.org
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 95162db020)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As per uapi documentation[1], the prerequisite for wedged device is to
redirected page faults to a dummy page. Follow it.
[1] Documentation/gpu/drm-uapi.rst
v2: Add uapi reference and fixes tag (Matthew Brost)
Fixes: 7bc00751f8 ("drm/xe: Use device wedged event")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260212055622.2054991-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c020fff70d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
vram_bar_size is registered as an int module parameter and is documented
to accept negative values to disable BAR resizing.
Store it as an int in xe_modparam as well, so negative values work as
intended and the module_param type matches.
Fixes: 80742a1aa2 ("drm/xe: Allow to drop vram resizing")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260202181853.1095736-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 25c9aa4dcb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the media GT is not allowed, a VF must not attempt to read
the media version from the GuC. The GuC may not be loaded, and
any attempt to communicate with it would result in a timeout
and a VF probe failure:
(...)
[ 1912.406046] xe 0000:01:00.1: [drm] *ERROR* Tile0: GT1: GuC mmio request 0x5507: no reply 0x5507
[ 1912.407277] xe 0000:01:00.1: [drm] *ERROR* Tile0: GT1: [GUC COMMUNICATION] MMIO send failed (-ETIMEDOUT)
[ 1912.408689] xe 0000:01:00.1: [drm] *ERROR* VF: Tile0: GT1: Failed to reset GuC state (-ETIMEDOUT)
[ 1912.413986] xe 0000:01:00.1: probe with driver xe failed with error -110
Let's skip reading the media version for VFs when the media GT is not
allowed.
v2: move the condition directly to the VF path
Fixes: 7abd69278b ("drm/xe/configfs: Add attribute to disable GT types")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260202115041.2863357-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 0bcacf56dc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The PSS_CHICKEN register has been part of the RCS engine's LRC since it
was first introduced in Xe_LP. That means that any workarounds that
adjust its value (such as Wa_14019988906 and Wa_14019877138) need to be
implemented in the lrc_was[] table so that they become part of the
default LRC from which all subsequent LRCs are copied. Although these
workarounds were implemented correctly on most platforms, they were
incorrectly placed on the engine_was[] table for Xe2_HPG.
Move the workarounds to the proper lrc_was[] table and switch the
'xe_rtp_match_first_render_or_compute' rule to specifically match the
RCS since that's the engine whose LRC manages the register.
Bspec: 65182
Fixes: 7f3ee7d880 ("drm/xe/xe2hpg: Add initial GT workarounds")
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20260205220508.51905-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit e04c609eed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_mmio_read64_2x32() was adjusting register addresses and then
calling xe_mmio_read32(), which applies the adjustment again.
This may shift accesses twice if adj_offset < adj_limit. There is
no issue currently, as for media gt, adj_offset > adj_limit, so
the 2nd adjust will be a no-op. But it may not work in future.
To fix it, replace the adjusted-address comparison with a direct
sanity check that ensures the MMIO address adjustment cutoff never
falls within the 8-byte range of a 64-bit register. And let
xe_mmio_read32() handle address translation.
v2: rewrite the sanity check in a more natural way. (Matt)
v3: Add Fixes tag. (Jani)
Fixes: 07431945d8 ("drm/xe: Avoid 64-bit register reads")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260130165621.471408-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a30f999681)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When user provides a bogus pat_index value through the madvise IOCTL, the
xe_pat_index_get_coh_mode() function performs an array access without
validating bounds. This allows a malicious user to trigger an out-of-bounds
kernel read from the xe->pat.table array.
The vulnerability exists because the validation in madvise_args_are_sane()
directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without
first checking if pat_index is within [0, xe->pat.n_entries).
Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug
builds, it still performs the unsafe array access in production kernels.
v2(Matthew Auld)
- Using array_index_nospec() to mitigate spectre attacks when the value
is used
v3(Matthew Auld)
- Put the declarations at the start of the block
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260205161529.1819276-1-jia.yao@intel.com
(cherry picked from commit 944a3329b0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On some configs and old compilers we can get following build errors:
../drivers/gpu/drm/xe/xe_configfs.h: In function 'xe_configfs_get_ctx_restore_mid_bb':
../drivers/gpu/drm/xe/xe_configfs.h:40:76: error: parameter name omitted
static inline u32 xe_configfs_get_ctx_restore_mid_bb(struct pci_dev *pdev, enum xe_engine_class,
^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/xe/xe_configfs.h: In function 'xe_configfs_get_ctx_restore_post_bb':
../drivers/gpu/drm/xe/xe_configfs.h:42:77: error: parameter name omitted
static inline u32 xe_configfs_get_ctx_restore_post_bb(struct pci_dev *pdev, enum xe_engine_class,
^~~~~~~~~~~~~~~~~~~~
when trying to define our configfs stub functions. Fix that.
Fixes: 7a4756b2fd ("drm/xe/lrc: Allow to add user commands mid context switch")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260203193745.576-1-michal.wajdeczko@intel.com
(cherry picked from commit f59cde8a24)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case of devm_add_action_or_reset() failure the provided cleanup
action will be run immediately on the not yet initialized kobject.
This may lead to errors like:
[ ] kobject: '(null)' (ff110001393608e0): is not initialized, yet kobject_put() is being called.
[ ] WARNING: lib/kobject.c:734 at kobject_put+0xd9/0x250, CPU#0: kworker/0:0/9
[ ] RIP: 0010:kobject_put+0xdf/0x250
[ ] Call Trace:
[ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe]
[ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe]
[ ] xe_sriov_init_late+0x5f/0x2c0 [xe]
[ ] xe_device_probe+0x5f2/0xc20 [xe]
[ ] xe_pci_probe+0x396/0x610 [xe]
[ ] local_pci_probe+0x47/0xb0
[ ] refcount_t: underflow; use-after-free.
[ ] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x68/0xb0, CPU#0: kworker/0:0/9
[ ] RIP: 0010:refcount_warn_saturate+0x68/0xb0
[ ] Call Trace:
[ ] kobject_put+0x174/0x250
[ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe]
[ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe]
[ ] xe_sriov_init_late+0x5f/0x2c0 [xe]
[ ] xe_device_probe+0x5f2/0xc20 [xe]
[ ] xe_pci_probe+0x396/0x610 [xe]
[ ] local_pci_probe+0x47/0xb0
Fix that by calling kobject_init() and kobject_add() separately
and register cleanup action after the kobject is initialized.
Also make this cleanup registration a part of the create helper to
fix another mistake, as in the loop we were wrongly passing parent
kobject while registering cleanup action, and this resulted in some
undetected leaks.
Fixes: 5c170a4d9c ("drm/xe/pf: Prepare sysfs for SR-IOV admin attributes")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260203235332.1350-1-michal.wajdeczko@intel.com
(cherry picked from commit 98b16727f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the unnecessary VRAM channel entry introduced in xe_hwmon_channel.
Without this, adding any new hwmon channel causes extra VRAM channel
to appear. This remained unnoticed earlier because VRAM was the
final xe hwmon channel.
v2: Use MAX_VRAM_CHANNELS with in_range() instead of
CHANNEL_VRAM_N_MAX. (Raag)
Fixes: 49a4983384 ("drm/xe/hwmon: Expose individual VRAM channel temperature")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260206081655.2115439-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since release 2025.12.02:
Add L2 statistics columns for recent Intel processors:
L2MRPS = L2 Cache M-References Per Second
L2%hit = L2 Cache Hit %
Sort work and output by cpu# rather than core#
Minor features and fixes.
-----BEGIN PGP SIGNATURE-----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=UG/p
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add L2 statistics columns for recent Intel processors:
L2MRPS = L2 Cache M-References Per Second
L2%hit = L2 Cache Hit %
- Sort work and output by cpu# rather than core#
- Minor features and fixes
* tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (23 commits)
tools/power turbostat: version 2026.02.14
tools/power turbostat: Fix and document --header_iterations
tools/power turbostat: Use strtoul() for iteration parsing
tools/power turbostat: Favor cpu# over core#
tools/power turbostat: Expunge logical_cpu_id
tools/power turbostat: Enhance HT enumeration
tools/power turbostat: Simplify global core_id calculation
tools/power turbostat: Unify even/odd/average counter referencing
tools/power turbostat: Allocate average counters dynamically
tools/power turbostat: Delete core_data.core_id
tools/power turbostat: Rename physical_core_id to core_id
tools/power turbostat: Cleanup package_id
tools/power turbostat: Cleanup internal use of "base_cpu"
tools/power turbostat: Add L2 cache statistics
tools/power turbostat: Remove redundant newlines from err(3) strings
tools/power turbostat: Allow more use of is_hybrid flag
tools/power turbostat: Rename "LLCkRPS" column to "LLCMRPS"
tools/power turbostat.8: Document the "--force" option
tools/power turbostat: Harden against unexpected values
tools/power turbostat: Dump hypervisor name
...
Added:
improve readahead for bitmap initialization and large directory scans
fsync files by syncing parent inodes
drop of preallocated clusters for sparse and compressed files
zero-fill folios beyond i_valid in ntfs_read_folio()
implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
implement iomap-based file operations
allow explicit boolean acl/prealloc mount options
a fall-through between switch labels
a delayed-allocation (delalloc) support
Fixed:
check return value of indx_find to avoid infinite loop
initialize new folios before use
an infinite loop in attr_load_runs_range on inconsistent metadata
an infinite loop triggered by zero-sized ATTR_LIST
ntfs_mount_options leak in ntfs_fill_super()
a deadlock in ni_read_folio_cmpr
a circular locking dependency in run_unpack_ex
prevent infinite loops caused by the next valid being the same
restore NULL folio initialization in ntfs_writepages()
a slab-out-of-bounds read in DeleteIndexEntryRoot
Changed:
allow readdir() to finish after directory mutations without rewinddir()
handle attr_set_size() errors when truncating files
make ntfs_writeback_ops static
refactor duplicate kmemdup pattern in do_action()
avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
Replaced:
use wait_on_buffer() directly
rename ni_readpage_cmpr into ni_read_folio_cmpr
-----BEGIN PGP SIGNATURE-----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=Y5Q9
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_7.0' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- improve readahead for bitmap initialization and large directory scans
- fsync files by syncing parent inodes
- drop of preallocated clusters for sparse and compressed files
- zero-fill folios beyond i_valid in ntfs_read_folio()
- implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
- implement iomap-based file operations
- allow explicit boolean acl/prealloc mount options
- fall-through between switch labels
- delayed-allocation (delalloc) support
Fixes:
- check return value of indx_find to avoid infinite loop
- initialize new folios before use
- infinite loop in attr_load_runs_range on inconsistent metadata
- infinite loop triggered by zero-sized ATTR_LIST
- ntfs_mount_options leak in ntfs_fill_super()
- deadlock in ni_read_folio_cmpr
- circular locking dependency in run_unpack_ex
- prevent infinite loops caused by the next valid being the same
- restore NULL folio initialization in ntfs_writepages()
- slab-out-of-bounds read in DeleteIndexEntryRoot
Updates:
- allow readdir() to finish after directory mutations without rewinddir()
- handle attr_set_size() errors when truncating files
- make ntfs_writeback_ops static
- refactor duplicate kmemdup pattern in do_action()
- avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
Replaced:
- use wait_on_buffer() directly
- rename ni_readpage_cmpr into ni_read_folio_cmpr"
* tag 'ntfs3_for_7.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (26 commits)
fs/ntfs3: add delayed-allocation (delalloc) support
fs/ntfs3: avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
fs/ntfs3: add fall-through between switch labels
fs/ntfs3: allow explicit boolean acl/prealloc mount options
fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot
ntfs3: Restore NULL folio initialization in ntfs_writepages()
ntfs3: Refactor duplicate kmemdup pattern in do_action()
fs/ntfs3: prevent infinite loops caused by the next valid being the same
fs/ntfs3: make ntfs_writeback_ops static
ntfs3: fix circular locking dependency in run_unpack_ex
fs/ntfs3: implement iomap-based file operations
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
fs/ntfs3: implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
fs/ntfs3: zero-fill folios beyond i_valid in ntfs_read_folio()
fs/ntfs3: handle attr_set_size() errors when truncating files
fs/ntfs3: drop preallocated clusters for sparse and compressed files
fs/ntfs3: fsync files by syncing parent inodes
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
fs/ntfs3: allow readdir() to finish after directory mutations without rewinddir()
fs/ntfs3: improve readahead for bitmap initialization and large directory scans
...
based on Kerberos 5 and brings a bunch of assorted CephFS fixes from
Ethan and Sam. One of Sam's patches in particular undoes a change in
the fscrypt area that had an inadvertent side effect of making CephFS
behave as if mounted with wsize=4096 and leading to the corresponding
degradation in performance, especially for sequential writes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmmUpbQTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziy+iB/9oWArHfGu/OLbmb+gQEikcGVmzr9r/
XE3Pcp6JQUMUf8mlOf18RdWn+ak509jQcnJDSyXzk+mHBOw/+VwPod3bZZGNHcYw
RwaUAWh9r79Bm0FnUewfQguj2FFnW1X4SrBrGCqsl/yOXbzHAGvDVzsoditfSB+J
8NPYJeFOk6VpRx5Qie66t2wwUoI/VtGs++D9R0CWEy1EpROH/nRkcTk7KlnfSIV0
FWSItUmssxp7Gm67O12390PxC0ZfQ6ApPNl5UOVkL7kfjqYsQKY948qlsTFHHFiM
M58fGysAfsfTCXuFWjnmTGhLubV2d9fdIN8OjYFaOjpXeJQ6WRAg8nbe
=jx2K
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"This adds support for the upcoming aes256k key type in CephX that is
based on Kerberos 5 and brings a bunch of assorted CephFS fixes from
Ethan and Sam. One of Sam's patches in particular undoes a change in
the fscrypt area that had an inadvertent side effect of making CephFS
behave as if mounted with wsize=4096 and leading to the corresponding
degradation in performance, especially for sequential writes"
* tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client:
ceph: assert loop invariants in ceph_writepages_start()
ceph: remove error return from ceph_process_folio_batch()
ceph: fix write storm on fscrypted files
ceph: do not propagate page array emplacement errors as batch errors
ceph: supply snapshot context in ceph_uninline_data()
ceph: supply snapshot context in ceph_zero_partial_object()
libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing
libceph: add support for CEPH_CRYPTO_AES256KRB5
libceph: introduce ceph_crypto_key_prepare()
libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen()
libceph: define and enforce CEPH_MAX_KEY_LEN
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE9zuTYTs0RXF+Ke33EVvVyTe/1WoFAmmUaqQACgkQEVvVyTe/
1WrRVRAAil+jvxM26SR3lPp/EmGdlsvRwflin1wb6laey96Ezfos4KLBFkoz9cgZ
gW4aZBGx2MDBQy3DNlVbsQZgc4CAnQxrH5HLeR8y5zSbEI3WlcI1vQonzsh61/Cd
Ajnu0asivUTWnuoFicq7syT4TcDVUJFMNxjNCTBkRDWmQIkQZAA2Dy/0nWpur83s
QjAOLcCljxp88oqY1YE5Lbt7xyToL8vhxF2vN1cFrIZ6Ec/BN9x5LizAYGRjEQ6o
qN6o6dAZ4VDyLHms8YQ4KHuj+1psTEPyCNeC3tReek5VKYNS/I9WAwawD4QnmfSu
DF5CYkErFW3eVczFkaKl3K65CR6YkBFJhcNeEIViDh4TKSTtmdFURZPH+IVsB6KT
/Z+4LnNMxdN55tleYDMoxBBecurLQSyjVMDoCrMlRB5iWJL+/G5TO2ahDp+wGWCu
b9FS3DTa6XE/e7xRzDvitRfBX5N8xHNTn8keKRHe4Q7j0DRMYfdltbMz5wyhXfUW
YOZNINFpwwvn0Hq8NK86/lhctOi0qkBmqRbMIzAYwgYJI8Kdbe3wqcDeo2k7K4fC
J4O+puL263+vA85jqyXGmk+H4EK8Z3BNX+uFh8ucFtGi/rBGpLHBS1HiFEFBYRoW
IX6y2EGxgDHvrRbyfVG2EJMjd9XMflOjMYkurJ0r38Cl5Vnreqg=
=v9Yt
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Amir Goldstein:
"Relax the semantics of uuid=off to cater to a use case of overlayfs
lower layers on btrfs clones, whose UUID are ephemeral and an upper
layer on a different filesystem"
* tag 'ovl-update-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: relax requirement for uuid=off,index=on
Emil Tsalapatis says:
====================
libbpf: Fix perm errors for LDIMM_64_FULL_RANGE_OFF
Commit 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
adds a feature flag for testing whether the running kernel supports LDIMM64
instructions with large direct offsets. Fix two edge cases that can
cause unexpected -EPERM errors in two ways:
1) The probe program used for the feature has type TRACEPOINT, but it's
possible the caller does not have permission to load it, even if it is
able to do so for generic BPF programs. Use the SOCKET_FILTER type
instead that requires fewer permissions. This does not affect the check
itself, which will always fail verification anyway.
2) The probe is triggered during bpf_object__collect_relos(), itself
called in bpf_object_open(), to compute the arena relocation offsets of
arena variables. However, the caller may not have permissions to load
BPF programs. This is the case in some systems with the bpftool calls made
by the BPF selftests during compilation, e.g., for skeleton generation.
Move all uses of the feature check to bpf_object_prepare() time instead.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
v2 -> v3: https://lore.kernel.org/bpf/20260214021014.15670-1-emil@etsalapatis.com/
- Only zero out the first byte of the log buffer (Andrii)
- Minimize invocations of the feature gate (Andrii)
v1 -> v2: https://lore.kernel.org/bpf/20260213181752.505318-1-emil@etsalapatis.com/
- Adjust the hash of the original commit post-tree rebase
- Ensure close() is not called on invalid prog_fd in feature probe (Coverity)
====================
Link: https://patch.msgid.link/20260217204345.548648-1-emil@etsalapatis.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Commit 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
adds a feature gate check that loads a map and BPF program to
test the running kernel supports large direct offsets for LDIMM64
instructions. This check is currently used to calculate arena symbol
offsets during bpf_object__collect_relos, itself called by
bpf_object_open.
However, the program calling bpf_object_open may not have the permissions to
load maps and programs. This is the case with the BPF selftests, where
bpftool is invoked at compilation time during skeleton generation. This
causes errors as the feature gate unexpectedly fails with -EPERM.
Avoid this by moving all the use of the FEAT_LDIMM64_FULL_RANGE_OFF feature gate
to BPF object preparation time instead.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-3-emil@etsalapatis.com
Commit 728ff16791 uses a PROG_TYPE_TRACEPOINT BPF test program to
check whether the running kernel supports large LDIMM64 offsets. The
feature gate incorrectly assumes that the program will fail at
verification time with one of two messages, depending on whether the
feature is supported by the running kernel. However,
PROG_TYPE_TRACEPOINT programs may fail to load before verification even
starts, e.g., if the shell does not have the appropriate capabilities.
Use a BPF_PROG_TYPE_SOCKET_FILTER program for the feature gate instead.
Also fix two minor issues. First, ensure the log buffer for the test is
initialized: Failing program load before verification led to libbpf dumping
uninitialized data to stdout. Also, ensure that close() is only called
for program_fd in the probe if the program load actually succeeded. The
call was currently failing silently with -EBADF most of the time.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-2-emil@etsalapatis.com
Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine support
- Synopsis DW AXI Agilex5 support
- Renesas RZ/V2N SoC support
- Atmel microchip lan9691-dma support
- Tegra ADMA tegra264 support
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support
-----BEGIN PGP SIGNATURE-----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=nrcD
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
- Core
- Add suuport for "rx-polarity" and "tx-polarity" device tree properties
and phy common properties to manage this
- New Support
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy support, USB
UNI PHY support and SMB2370 eUSB2 repeater support. SC8280xp QMP UFS PHY
support, Kaanapali PCIe phy and QMP PHY support, QCS615 QMP USB3+DP PHY
and driver support for that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver.
- TI TCAN1046 phy support.
- Renesas RZ/V2H(P) and RZ/V2N usb3 support
- Mediatek MT8188 hdmi-phy support
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY support
- Updates
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support
-----BEGIN PGP SIGNATURE-----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=6ibD
-----END PGP SIGNATURE-----
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
- support for Qualcomm v2.2.0 controllers
- Bus method updates for .probe(), .remove() and .shutdown() and remove
function return value updates
- Avell B.ON dmi-quirks mapping
- Mark cs42l45 codec as wake capable
-----BEGIN PGP SIGNATURE-----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=BCe3
-----END PGP SIGNATURE-----
Merge tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
