bfa_fcs_fdmi_get_portattr() gets inlined into multiple places and has
two fairly large variables on the stack, to the point of causing a
warning in some randconfig builds:
drivers/scsi/bfa/bfa_fcs_lport.c:2198:1: error: stack frame size (1560) exceeds limit (1280) in 'bfa_fcs_lport_fdmi_build_portattr_block' [-Werror,-Wframe-larger-than]
2198 | bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
| ^
drivers/scsi/bfa/bfa_fcs_lport.c:1856:1: error: stack frame size (1600) exceeds limit (1280) in 'bfa_fcs_lport_fdmi_build_rhba_pyld' [-Werror,-Wframe-larger-than]
1856 | bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
| ^
Mark the inner function as noinline_for_stack to keep it separate from
the other variables and prevent multiple copies of the same variable to
get inlined here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611125601.3385418-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any other
parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use generic
device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where other
such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms enabling
real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers
-----BEGIN PGP SIGNATURE-----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=MzJz
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
Daniel Borkmann says:
====================
Extend netkit io_uring ZC selftests
Small follow-up to the HW net selftests, in particular to add a
selftest showing that also large rx_buf_len for io_uring ZC is
supported with netkit queue leasing.
====================
Link: https://patch.msgid.link/20260614102607.863838-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
test_iou_zcrx_large_buf in drivers/net/hw/nk_qlease.py runs iou-zcrx
with rx_buf_len > page size, backed by a hugepage-mapped area. Thus
add to the Kconfig.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260614102607.863838-5-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test_iou_zcrx_large_buf, which runs iou-zcrx with rx_buf_len >
page size (-x 2) through a netkit-leased RX queue. The netkit ifindex
is opaque to io_uring, but rx_page_size is honoured by the leased
physical qops via netif_mp_open_rxq()'s lease redirect.
Originally, I also added a BIG TCP variant on top, but dropped it
here as fbnic (and the QEMU fbnic model) has no BIG TCP support
to exercise it as this point.
Tested against the QEMU fbnic emulation. The new test exercises
the > page rx_buf_len path only when the leased NIC advertises
QCFG_RX_PAGE_SIZE; otherwise it skips.
For fbnic, I used Bjorn's patches locally [0]:
# ./nk_qlease.py
TAP version 13
1..5
ok 1 nk_qlease.test_iou_zcrx
ok 2 nk_qlease.test_iou_zcrx_large_buf
ok 3 nk_qlease.test_attrs
ok 4 nk_qlease.test_attach_xdp_with_mp
ok 5 nk_qlease.test_destroy
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Without those patches (aka not advertising QCFG_RX_PAGE_SIZE):
# ./nk_qlease.py
TAP version 13
1..5
ok 1 nk_qlease.test_iou_zcrx
ok 2 nk_qlease.test_iou_zcrx_large_buf # SKIP Large chunks are not supported -95
ok 3 nk_qlease.test_attrs
ok 4 nk_qlease.test_attach_xdp_with_mp
ok 5 nk_qlease.test_destroy
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://lore.kernel.org/netdev/20260522113225.241337-1-bjorn@kernel.org/ [0]
Link: https://patch.msgid.link/20260614102607.863838-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose the netkit host ifname as a public attribute nk_host_ifname
(symmetric with the already-public nk_guest_ifname), rename _attach_bpf
to a public attach_bpf, and add a public detach_bpf helper that
encapsulates the tc-filter teardown bookkeeping. Switch the fixtures
to this public API. No functional change and keeps pylint happy.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260614102607.863838-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HW counterpart of nk_qlease.py was carrying its lease setup in main()
and stashing src_queue / nk_queue / nk_*_ifname on cfg, which had drawbacks
called out during the review at [0].
This is the deferred half of the cleanup that landed in commit e254ffb950
("selftests/net: Split netdevsim tests from HW tests in nk_qlease") which
was the SW counterpart of nk_qlease.py.
While at it, convert the open-coded "ip netns exec" prefixes in the test
bodies over to the ns= argument of cmd() / bkg().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://lore.kernel.org/netdev/20260408162238.16709090@kernel.org/ [0]
Link: https://patch.msgid.link/20260614102607.863838-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The usual mixture of minor fixes, a few cleanups, a new driver and dt
updates for the pwm subsystem.
Thanks to Chen Ni, Devi Priya, Manish Baing, Maurice Hieronymus, Ronaldo
Nunez, Rosen Penev, Shiji Yang and Yixun Lan for the actual changes and
Bjorn Andersson, Conor Dooley, Frank Li, Michal Wilczynski and Rob
Herring for reviews and acks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmovj1UACgkQj4D7WH0S
/k4ATQf/YNPhLsDzLj0q7VM4wmMdBkX5s8e1yRAu4rRKMevWGP041MQMKxSiYU5k
7vSEvxGaK2c5nmM6Iop6KJ1+wkL3fQNG+o2e5iOyedgFlayoHTE/vMOsooLPyJ7G
thKFRQYqXenMtetY9n2fHaOtHayid/JWfZ1lQ9dlf8RDS1eN8dlgR/E4pNL5HUCv
n3McnhbBxUrxpQaSeTfBRGwVahCORcS01srlLeT/VXlCHVGAwIZu/qtWTlHH7jXZ
JO3iKxWlcUHvgt8BYxjpio3gYB9LZhunL23FtIHg48+HjYLyRS+JD2SYSWV2FZ+l
0oRKImnotlW2zeFskp8VIqReUrJMgg==
=4Uq3
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"The usual mixture of minor fixes, a few cleanups, a new driver and dt
updates for the pwm subsystem.
Thanks to Chen Ni, Devi Priya, Manish Baing, Maurice Hieronymus,
Ronaldo Nunez, Rosen Penev, Shiji Yang and Yixun Lan for the actual
changes and Bjorn Andersson, Conor Dooley, Frank Li, Michal Wilczynski
and Rob Herring for reviews and acks"
* tag 'pwm/for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: Remove requirement for mul_u64_u64_div_u64_roundup
dt-bindings: pwm: stmpe: Drop legacy binding
pwm: pca9685: Use named initializers for struct i2c_device_id
pwm: pxa: Add optional bus clock
dt-bindings: pwm: marvell,pxa-pwm: Add SpacemiT K3 PWM support
pwm: ipq: Add missing module description
pwm: stm32: Make use of mul_u64_u64_div_u64_roundup()
pwm: Consistently define pci_device_ids using named initializers
pwm: Driver for qualcomm ipq6018 pwm block
pwm: imx27: Fix variable truncation in .apply()
pwm: mediatek: correct mt7628 clock source setting
pwm: mediatek: set mt7628 pwm45_fixup flag to false
pwm: atmel-tcb: Remove unneeded semicolon
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too.
Fixes: 2dbcdf33db ("xen-scsiback: Convert to percpu_ida tag allocation")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20260611123046.2323342-3-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a
refcount of 0. That underflows it ("refcount_t: underflow;
use-after-free") and, as the release function is not run, leaks the
command tag.
Impact: a pvSCSI guest can leak every command tag of a LUN's session,
stopping the LUN, by submitting requests with a bad grant reference or
an unknown request type; under panic_on_warn the refcount underflow
panics the host.
Add a helper that just returns the tag with target_free_tag() and sends
the error response. It frees the tag while the v2p reference still pins
the session, and snapshots the response fields beforehand because
freeing the tag can let another ring reuse the pending_req slot.
Fixes: 2dbcdf33db ("xen-scsiback: Convert to percpu_ida tag allocation")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20260611123046.2323342-2-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Improvements
- Add bound checks when iterating the coreboot table.
- Skip failing entries only instead of aborting the whole device
populate from the coreboot table.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCai9pAxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0Al8A/2+K6Up3CzuMZQyDJDOwkFb4Qx4CxfFu
iSecYI5xvUAqAQC28M9Tlg73QBl88ZOzcR9WGE8b7P+sW4UQ/Z8BQ1RTBg==
=HJUM
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-firmware-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform firmware updates from Tzung-Bi Shih:
- Add bound checks when iterating the coreboot table
- Skip failing entries only instead of aborting the whole device
populate from the coreboot table
* tag 'chrome-platform-firmware-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: Skip failing entries instead of aborting populate
firmware: google: Add bounds checks in coreboot_table_populate()
* Improvements
- Use named initializers for struct i2c_device_id.
* Fixes
- Fix a probe race between cros_ec_sensorhub and cros_ec_sysfs.
- Check for the presence of ACPI_COMPANION() for drivers converted
from acpi_driver to platform_driver to avoid issues where
device_match_driver_override() might forcibly match the driver to
the device.
- Fix a possible UAF in cros_ec_chardev.
- Prevent build for big-endian systems as CHROME_PLATFORMS drivers are
only running and testing under little-endian systems.
* Cleanups
- Drop some redundant bits in cros_kbd_led_backlight and Kconfig.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCai9lxRMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz04cYBALQW7+ddzPPKSShIxACyFsdMV7+DvfUT
QH8RjhxrYDrjAQC+LGgyy14jGngfuo/mPjEuefuqdPwT2EBDlGXRnLYNDg==
=lFBr
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform updates from Tzung-Bi Shih:
"Improvements:
- Use named initializers for struct i2c_device_id
Fixes:
- Fix a probe race between cros_ec_sensorhub and cros_ec_sysfs
- Check for the presence of ACPI_COMPANION() for drivers converted
from acpi_driver to platform_driver to avoid issues where
device_match_driver_override() might forcibly match the driver to
the device
- Fix a possible UAF in cros_ec_chardev
- Prevent build for big-endian systems as CHROME_PLATFORMS drivers
are only running and testing under little-endian systems
Cleanups:
- Drop some redundant bits in cros_kbd_led_backlight and Kconfig"
* tag 'chrome-platform-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Prevent build for big-endian systems
platform/chrome: Remove superfluous dependencies from CROS_EC
platform/chrome: cros_ec_chardev: Introduce rwsem for protecting ec_dev
platform/chrome: cros_ec_chardev: Add event relayer
platform/chrome: cros_ec_chardev: Move data to chardev_pdata
platform/chrome: cros_ec_chardev: Introduce chardev_data
platform/chrome: Use named initializers for struct i2c_device_id
platform/chrome: wilco_ec: event: Check ACPI_COMPANION()
platform/chrome: chromeos_tbmc: Check ACPI_COMPANION()
platform/chrome: chromeos_privacy_screen: Check ACPI_COMPANION()
platform/chrome: cros_kbd_led_backlight: Drop CONFIG_MFD_CROS_EC_DEV ifdeffery
platform/chrome: cros_kbd_led_backlight: Pass keyboard_led as parameter
platform/chrome: cros_kbd_led_backlight: Drop max_brightness from driver data
platform/chrome: Resolve kb_wake_angle visibility race
Commit 1cea5180f2 ("block: remove pktcdvd driver") left behind an export
that is now dead code. Remove it and move the declaration of
scsi_device_from_queue() to drivers/scsi/scsi_priv.h.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Link: https://patch.msgid.link/20260608-remove-pktcdvd-references-v4-1-72f88b04cc87@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
trace__fprintf_tp_fields() compares every field name against
"__probe_ip" for all tracepoint events, but this field is only
implicitly added by the Ftrace subsystem to bare dynamic probes.
Add an evsel__is_probe() check before the strcmp so the string
comparison is skipped entirely for non-probe events.
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several places in perf need to check whether an evsel is a kprobe or
uprobe, which requires looking up the PMU by name via evsel__find_pmu().
This lookup walks the PMU list each time, which is wasteful when the
same evsel is checked repeatedly.
Add evsel__is_kprobe(), evsel__is_uprobe(), and evsel__is_probe() that
resolve the probe type on first call via evsel__pmu_name() and cache
the result in a 3-bit field (probe_type) in struct evsel. The field
fits in existing padding after the bool fields, so struct size does not
grow.
The enum uses PROBE__UNKNOWN (0) as the uninitialized sentinel —
explicitly set in evsel__init() — so the lookup happens on first use.
PROBE__NOPE (1) caches "not a probe" to avoid repeated negative lookups.
PMU-based probes (kprobe/uprobe PMU) are detected by PMU name.
Ftrace-based dynamic probes (created via tracefs, reported as PMU
"tracepoint") are detected by the __probe_ip field that the kernel
adds to all dynamic probe formats. This covers kprobes, uprobes, and
fprobes regardless of their group/system name.
Cc: Aaron Tomlin <atomlin@atomlin.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building without libtraceevent (NO_LIBTRACEEVENT=1), evsel__field()
and evsel__common_field() are declared but never defined, causing link
errors in any code path that references them.
Add inline stubs that return NULL when HAVE_LIBTRACEEVENT is not defined,
matching the pattern used by other evsel accessor functions.
Cc: Aaron Tomlin <atomlin@atomlin.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
metadata[j][CS_ETM_CPU] is a u64 from perf.data, but the comparison
with max_cpu casts it to (int). A crafted value like 0xFFFFFFFF becomes
-1 after the cast, which compares less than max_cpu (0), so the queue
array is never sized to accommodate it. When the value is later passed
to cs_etm__get_queue(), it indexes queue_array with the original large
value, causing an out-of-bounds access.
Validate that CS_ETM_CPU fits in an int before using it in the signed
comparison.
Fixes: 57880a7966 ("perf: cs-etm: Allocate queues for all CPUs")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
c2c_hists__init() calls hpp_list__parse() which allocates and registers
format entries on hists->list. When c2c_he_free() destroys a c2c hist
entry, it deletes the histogram entries and frees the hists container but
never unregisters the format list entries, leaking them.
Call perf_hpp__reset_output_field() before freeing the hists to properly
unregister and free all format entries.
Fixes: f485e33c4543ac31 ("perf c2c report: Add cacheline hists processing")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpil_offs_to_addr() converts offsets stored in perf.data's
bpf_prog_info_linear structure into heap pointers by adding the offset
to the data allocation base. The offsets come from untrusted file input
and are not validated against data_len.
If an offset exceeds data_len, the computed address points outside the
allocated data buffer. Callers like synthesize_bpf_prog_name() then
dereference prog_tags[sub_id] or func_info pointers, reading arbitrary
heap memory.
Add a bounds check: when an offset exceeds data_len, zero the field
and skip the conversion. This prevents out-of-bounds pointer
construction from crafted perf.data files.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 6ac22d036f ("perf bpf: Pull in bpf_program__get_prog_info_linear()")
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_metadata_alloc() computes event_size from the number of BPF metadata
variables and stores it in header.size, which is __u16. With 204 or
more .rodata variables prefixed "bpf_metadata_", event_size exceeds
65535 and silently truncates.
The truncated header.size causes synthesize_perf_record_bpf_metadata()
to allocate a buffer sized by the truncated value, then memcpy the full
event data into it — a heap buffer overflow.
Add a check that event_size fits in __u16 before proceeding. BPF
programs with that many metadata variables are exotic enough that
silently dropping the metadata is acceptable.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: ab38e84ba9 ("perf record: collect BPF metadata from existing BPF programs")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Blake Jones <blakejones@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
synthesize_bpf_prog_name() computes a pointer into the func_info array
using sub_id * info->func_info_rec_size without validating either value.
Both come from perf.data and are untrusted:
- A func_info_rec_size smaller than sizeof(struct bpf_func_info) means
the finfo pointer would reference a truncated entry, reading past it
into adjacent data.
- A sub_id >= nr_func_info computes an offset past the func_info buffer,
causing an out-of-bounds read.
Add bounds checks for both values before computing the pointer offset.
When validation fails, fall through to the non-BTF name path instead
of reading garbage.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 7b612e291a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Cc: Song Liu <songliubraving@fb.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
map__findnew_thread() marks color-pid threads by storing (void*)1 as
the thread private data via thread__set_priv(). This sentinel value
causes two problems:
1. thread__get_runtime() returns (void*)1 as a struct thread_runtime
pointer. Any field access (e.g. tr->shortname) dereferences address
1, which is an unmapped page — immediate segfault.
2. cmd_sched() registers free() as the thread priv destructor, so thread
cleanup calls free((void*)1) — undefined behavior that corrupts the
heap on many allocators.
Fix by adding a 'color' flag to struct thread_runtime and allocating a
real runtime struct for color-pid threads. thread__has_color() now
checks the flag instead of relying on priv being non-NULL.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 58a606149c ("perf sched: Avoid union type punning undefined behavior")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hwmon_pmu__describe_items() checks 'if (fd > 0)' after openat(), which
incorrectly rejects fd 0. While fd 0 is normally stdin, if stdin has
been closed (common in daemon/service contexts), the kernel reuses fd 0
for the next open. With fd > 0, the sysfs file is not read and the fd
is leaked.
Change to 'if (fd >= 0)' to match the standard openat() error check.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 53cc0b351e ("perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
get_kernel_version() in machine.c and dso__load_guest_kernel_sym() in
symbol.c use sprintf() to construct paths by prepending root_dir to
"/proc/version" and "/proc/kallsyms" respectively. Both write into
PATH_MAX stack buffers, but root_dir comes from --guestmount or KVM
configuration and is not length-checked. A root_dir at or near
PATH_MAX causes a stack buffer overflow.
Switch to snprintf() with sizeof(path) to prevent overflow.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: a1645ce12a ("perf: 'perf kvm' tool for monitoring guest performance from host")
Cc: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__decompress() has an early return for files that are not
actually compressed, where it calls open() directly. When open()
fails, the function returns -1 but never sets *err. The caller chain
(decompress_kmodule → dso__decompress_kmodule_path → dso__get_filename)
then reads *dso__load_errno(dso) to set errno, but that field was never
populated, so errno gets a stale or zero value.
With errno=0, __open_dso() computes fd = -errno = 0, which is non-
negative, so callers treat fd 0 (stdin) as a valid DSO file descriptor.
Set *err = errno when open() fails on the uncompressed path, matching
the error handling on the compressed path at line 354.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 8b42b7e5e8 ("perf tools: Add is_compressed callback to compressions array")
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__get_filename() allocates name with malloc(PATH_MAX), but the
dso__filename_with_chroot() path replaces name with an asprintf'd
exact-size string (e.g. 8 bytes for "/a/b.ko"). When the DSO needs
decompression, dso__decompress_kmodule_path() writes the temp path
("/tmp/perf-kmod-XXXXXX", 22 bytes) into newpath, and strcpy(name,
newpath) overflows the smaller allocation.
Replace the strcpy with strdup(newpath) + free(name) so the buffer
is always correctly sized for its content.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 1d6b3c9ba7 ("perf tools: Decompress kernel module when reading DSO data")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sysfs__read_build_id() iterates ELF note headers from sysfs files in a
while(1) loop. If the file contains a zero-filled note header (both
n_namesz and n_descsz are 0), the code computes n = namesz + descsz = 0
and calls read(fd, bf, 0). read() with count 0 returns 0, which
matches the expected (ssize_t)n value, so the error check passes and
the loop repeats — reading the same zero bytes and spinning forever.
This can happen with corrupted or zero-padded sysfs pseudo-files.
Add a check for n == 0 before the read, since no valid ELF note has
both name and description of zero length.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: f1617b4059 ("perf symbols: Record the build_ids of kernel modules too")
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__read_build_id() stores ELF p_filesz in a ssize_t variable.
A crafted 32-bit ELF with p_filesz = 0xFFFFFFFF produces ssize_t value
-1. The comparison `p_filesz > buf_size` evaluates false because signed
-1 is less than any non-negative buf_size, so the realloc is skipped and
buf remains NULL.
The subsequent read(fd, NULL, -1) returns -1, which equals p_filesz,
passing the error check. read_build_id() then dereferences the NULL
buffer.
Add an explicit check for p_filesz <= 0 before using the value,
catching both zero-length and sign-wrapped negative sizes from crafted
ELF files.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: ba0b7081f7 ("perf symbol-minimal: Fix ehdr reading in filename__read_build_id")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__read_build_id() byte-swaps 32-bit ELF program headers on
cross-endian files, but line 178 passes p_offset to bswap_32() instead
of p_filesz:
hdrs.phdr32[i].p_filesz = bswap_32(hdrs.phdr32[i].p_offset);
This clobbers p_filesz with the already-swapped p_offset value. The
64-bit path on line 182 is correct and swaps p_filesz from p_filesz.
The consequence is that the PT_NOTE segment read uses the wrong size,
which can cause either a short read (missing the build-id) or an
oversized read (reading past the segment into adjacent data).
Fix by swapping the correct field.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: fef8f648bb ("perf symbol: Fix use-after-free in filename__read_build_id")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eric Joyner says:
====================
ionic: Expose more port stats to ethtool [part]
The primary aim of this patchset is to support the reporting of new port
statistics (and one old one) that firmware sends to the driver. A scheme
for these extra stats is introduced in order to prevent devices that
don't support these new statistics from unconditionally setting them or
reporting them in ethtool.
====================
Link: https://patch.msgid.link/20260614205303.48088-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of times that link has gone down at the port level is tracked
by the firmware and sent to the driver via regular DMA writes to an
instance of struct ionic_port_status in the driver's memory.
This statistic was never reported in favor of a driver-derived stat, but
doing it in the driver was never necessary since firmware had been
reporting it the whole time. Since it would be more accurate and true to
the description of the statistic to get this count at the PHY level,
replace the driver-calculated statistic with one derived from the
firmware one and remove the driver-calculated one entirely.
The stat reported by the ethtool .get_link_ext_stats() handler is
normalized to 0 on driver load and any device resets that require the
driver to rebuild state while also handling overflows.
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260614205303.48088-5-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This stat contains the number of total bits that the PHY has received;
it's useful for BER calculations. Add it to the ethtool stats output.
However, since this is one of the new "extra port stats", it's reported
in a different manner than the existing port stats and only
conditionally added to the ethtool stats output list: both the
DEV_CAP_EXTRA_STATS capability must be supported by the firmware, and
the firmware must set the value of the statistic to something other than
IONIC_STAT_INVALID.
To help support this scheme, the extra port stats region is initialized to
0xff's/IONIC_STAT_INVALID by the driver, to ensure the statistics that
the driver knows about but the firmware does not are still invalid
to the driver.
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260614205303.48088-4-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new structure to report additional statistics from the firmware to
struct ionic_port_info. This new struct currently only contains FEC
related statistics, but any new port-level statistics collected by the
firmware would go into it.
The new structure is located in the same area as the unused
ionic_port_pb_stats structure, so this patch also removes that and its
supporting enumerations since they was never used in this driver.
Finally, to indicate firmware support for the new structure, introduce a
new device capability that the driver can use to see if the attached
device supports reporting these extra stats.
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260614205303.48088-3-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current check will fail if SR-IOV is not initialized for the
physical function; this is because is_physfn is 0 if sriov_init() isn't
run or fails. Change the check that prevents getting the link down count
to use is_virtfn instead so that VFs don't get this functionality, which
was the original intent.
Fixes: 132b4ebfa0 ("ionic: add support for ethtool extended stat link_down_count")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260614205303.48088-2-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Make kexec and TDX finally place nice together
* Put TDX error codes into a single header
-----BEGIN PGP SIGNATURE-----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=Y3yy
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"There are a few cleanups, and some changes that should allow TDX and
kexec to coexist nicely.
The biggest change, however, is support for updating the TDX module
after boot, just like CPU microcode. TDX users really want this
because it lets them do security updates without tearing things down
and rebooting.
- Add TDX module update support
- Make kexec and TDX finally place nice together
- Put TDX error codes into a single header"
* tag 'x86_tdx_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/virt/tdx: Document TDX module update
x86/virt/tdx: Enable TDX module runtime updates
x86/virt/tdx: Refresh TDX module version after update
coco/tdx-host: Lock out module updates when reading version
x86/virt/seamldr: Add module update locking
x86/virt/tdx: Restore TDX module state
x86/virt/seamldr: Initialize the newly-installed TDX module
x86/virt/seamldr: Install a new TDX module
x86/virt/tdx: Reset software states during TDX module shutdown
x86/virt/seamldr: Shut down the current TDX module
x86/virt/seamldr: Abort updates after a failed step
x86/virt/seamldr: Introduce skeleton for TDX module updates
x86/virt/seamldr: Allocate and populate a module update request
coco/tdx-host: Implement firmware upload sysfs ABI for TDX module updates
coco/tdx-host: Don't expose P-SEAMLDR information on CPUs with erratum
coco/tdx-host: Expose P-SEAMLDR information via sysfs
x86/virt/seamldr: Add a helper to retrieve P-SEAMLDR information
x86/virt/seamldr: Introduce a wrapper for P-SEAMLDR SEAMCALLs
coco/tdx-host: Expose TDX module version
coco/tdx-host: Introduce a "tdx_host" device
...
* Update comment about pgd_list
-----BEGIN PGP SIGNATURE-----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=tM/K
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"There's a small comment fixup, followed by an actual bug fix. The bug
fix is slightly new territory for us. It fixes a real regression, but
it is from ~6.18 not a _new_ regression. It was mostly only biting
folks doing hotplug memory testing. So, it was queued in here and held
for the merge window instead of going via x86/urgent.
- Fix freeing of PMD-sized vmemmap pages
- Update comment about pgd_list"
* tag 'x86_mm_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix freeing of PMD-sized vmemmap pages
x86: Update comment about pgd_list
* Remove unused header
* Ensure printf() validation in all configs
-----BEGIN PGP SIGNATURE-----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=8iBm
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"These are the usual random pile, with the one exception of moving Rick
over to be a TDX maintainer. Rick has been doing a great job with TDX
contributions, especially on the host side of things. It's time to
promote him to "M".
- Move Rick Edgecombe to TDX maintainer
- Remove unused header
- Ensure printf() validation in all configs"
* tag 'x86_misc_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Move Rick Edgecombe to TDX maintainer
x86: Remove unnecessary architecture-specific <asm/device.h>
x86/bug: Put HAVE_ARCH_BUG_FORMAT_ARGS WARN definitions inside __ASSEMBLER__
x86/bug: Add printf() validation to HAVE_ARCH_BUG_FORMAT_ARGS WARNs
call paths now that the GHCB helpers handle early-boot fallback internally
- Skip SNP initialization in the CCP driver immediately when the preparation
step fails rather than proceeding to an operation that will certainly fail
- Abort SNP preparation and return an error when not all CPUs are online,
since the firmware enforces that every CPU enables SNP and will fail init if
not
- Simplify the VMM communication exception entry path by replacing separate
kernel and user mode macros with a single handler that dispatches based on
the current privilege level
-----BEGIN PGP SIGNATURE-----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=Wq1K
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Remove redundant GHCB initialization guards in the SEV page state and
SVSM call paths now that the GHCB helpers handle early-boot fallback
internally
- Skip SNP initialization in the CCP driver immediately when the
preparation step fails rather than proceeding to an operation that
will certainly fail
- Abort SNP preparation and return an error when not all CPUs are
online, since the firmware enforces that every CPU enables SNP and
will fail init if not
- Simplify the VMM communication exception entry path by replacing
separate kernel and user mode macros with a single handler that
dispatches based on the current privilege level
* tag 'x86_sev_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/sev: Remove redundant ghcbs_initialized checks around __sev_{get,put}_ghcb()
crypto/ccp: Skip SNP_INIT if preparation fails
x86/sev: Do not initialize SNP if missing CPUs
x86/entry: Zap the #VC entry user and kernel macros
Daniel Golle says:
====================
net: dsa: mxl862xx: SerDes ports
Add support for the two SerDes PCS interfaces of the MxL862xx switch
ICs, which can both either be used to connect PHYs or SFP cages, or as
CPU port(s). 1000Base-X, 2500Base-X, 10GBase-R, 10GBase-KR, SGMII,
QSGMII and USXGMII (single 10G or quad 2.5G) are supported.
The firmware only added the API to directly control the PCS as of
version 1.0.84, so the PCS features are gated behind a version check.
As the driver is growing do some refactoring to break out the phylink
parts into mxl862xx-phylink.h.
====================
Link: https://patch.msgid.link/cover.1781319534.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MxL862xx has two XPCS/SerDes interfaces (XPCS0 for ports 9-12,
XPCS1 for ports 13-16). Each can operate in various single-lane modes
(SGMII, 1000Base-X, 2500Base-X, 10GBase-R, 10GBase-KR, USXGMII) or as
QSGMII or 10G_QXGMII providing four sub-ports per interface.
Implement phylink PCS operations using the firmware's XPCS API:
- pcs_enable/pcs_disable: refcount the sub-ports sharing an XPCS
and power it down once the last sub-port is released.
- pcs_config: configure negotiation mode and CL37/SGMII advertising.
- pcs_get_state: read link state and the link-partner ability word
from firmware and decode using phylink's standard CL37, SGMII, and
USXGMII decoders.
- pcs_an_restart: restart CL37 or CL73 auto-negotiation.
- pcs_link_up: force speed/duplex for SGMII.
- pcs_inband_caps: report per-mode in-band status capabilities.
Register a PCS instance for each SerDes interface and
QSGMII/10G_QXGMII sub-ports during setup. Advertise the supported
interface modes in phylink_get_caps based on port number.
Firmware older than 1.0.84 lacks the XPCS API and instead configures
the SerDes itself, using defaults stored in flash. mac_select_pcs()
returns NULL in that case while the single-lane interface modes stay
advertised, so a CPU port keeps working in the firmware-configured
mode.
Lacking support for expressing PHY-side role modes in Linux only the
MAC-side of SGMII, QSGMII, USXGMII and 10G_QXGMII are implemented for
now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/736e4df02e4cb8c530c1670cbe7efac20b5d696d.1781319534.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the MXL862XX_API_WRITE, MXL862XX_API_READ and
MXL862XX_API_READ_QUIET convenience macros from mxl862xx.c to
mxl862xx-host.h next to the mxl862xx_api_wrap() prototype they wrap.
This makes them available to other compilation units that include
mxl862xx-host.h, which is needed once the SerDes PCS code in
mxl862xx-phylink.c also calls firmware commands.
No functional change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/914f57931e79cc3932a9f32813465c08d29cf4bf.1781319534.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the phylink MAC operations and get_caps callback from mxl862xx.c
into a dedicated mxl862xx-phylink.c file. This prepares for the SerDes
PCS implementation which adds substantial phylink/PCS code -- keeping
it in a separate file avoids function-position churn in the main
driver file.
No functional change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/fb9336de94bef47a0834287cbca87954e5e4c795.1781319534.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Query the firmware version at init (already done in wait_ready),
cache it in priv->fw_version, and provide MXL862XX_FW_VER_MIN()
for version-gated code paths throughout the driver.
MXL862XX_FW_VER() packs major/minor/revision into a u32 with
bitwise shifts so that versions compare with natural ordering,
independent of host endianness.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91a26a8ffeaa2ce1729f98347e93e779973976bb.1781319534.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
retrieval function and restrict it to Zen family processors, ensuring
patch level arithmetic always operates on a valid revision
- Fix an incorrect comment about which CPUID bit is checked when
determining whether the microcode loader should be disabled
- Add the latest Intel microcode revision data for a broad range of
processor models and steppings and add the script which generates the
header of minimum expected Intel microcode revisions
-----BEGIN PGP SIGNATURE-----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=KarZ
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- Move the zero-revision fixup for AMD microcode to the patch level
retrieval function and restrict it to Zen family processors, ensuring
patch level arithmetic always operates on a valid revision
- Fix an incorrect comment about which CPUID bit is checked when
determining whether the microcode loader should be disabled
- Add the latest Intel microcode revision data for a broad range of
processor models and steppings and add the script which generates the
header of minimum expected Intel microcode revisions
* tag 'x86_microcode_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Move the no-revision fixup to get_patch_level()
x86/microcode: Fix comment in microcode_loader_disabled()
scripts/x86/intel: Add a script to update the old microcode list
x86/microcode/intel: Refresh old_microcode defines with Nov 2025 release
-----BEGIN PGP SIGNATURE-----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=sSrt
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual pile of cleanups and fixlets the cat dragged in
* tag 'x86_cleanups_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove obsolete aperfmperf_get_khz() declaration
x86/pmem: Check for platform_device_alloc() retval
x86/platform/uv: Use str_enabled_disabled() in uv_nmi_setup_hubless_intr()
x86/cpu: Keep the PROCESSOR_SELECT menu together
x86/tlb: Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
x86/purgatory: Fix #endif comment
x86/boot: Get rid of kstrtoull()
x86/boot/compressed: Use boot_kstrtoul() for hugepages= parsing
- Simplify the error handling path when creating monitor group event
configuration directories
- Make the MBM event filter configurable only on architectures that
support it and expose this with the respective file modes in the event
config
- Disallow the MBA software controller on systems where MBM counters are
assignable, as it requires continuous bandwidth measurement that
assignable counters do not guarantee
- Replace a compile-time Kconfig option for fixed counter assignment
with a per-architecture runtime property, and expose whether the
counter assignment mode is changeable to userspace
- Continue counter allocation across all domains instead of aborting at
the first failure
- Document that automatic MBM counter assignment is best effort and may
not assign counters to all domains
- Document the behavior of task ID 0 and idle tasks in the resctrl tasks
file
-----BEGIN PGP SIGNATURE-----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=6iVq
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Preparatory work for MPAM counter assignment:
- Simplify the error handling path when creating monitor group event
configuration directories
- Make the MBM event filter configurable only on architectures that
support it and expose this with the respective file modes in the
event config
- Disallow the MBA software controller on systems where MBM counters
are assignable, as it requires continuous bandwidth measurement
that assignable counters do not guarantee
- Replace a compile-time Kconfig option for fixed counter assignment
with a per-architecture runtime property, and expose whether the
counter assignment mode is changeable to userspace
- Continue counter allocation across all domains instead of aborting
at the first failure
- Document that automatic MBM counter assignment is best effort and
may not assign counters to all domains
- Document the behavior of task ID 0 and idle tasks in the resctrl
tasks file"
* tag 'x86_cache_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Document tasks file behaviour for task id 0 and idle tasks
fs/resctrl: Document that automatic counter assignment is best effort
fs/resctrl: Continue counter allocation after failure
fs/resctrl: Add monitor property 'mbm_cntr_assign_fixed'
fs/resctrl: Disallow the software controller when MBM counters are assignable
x86,fs/resctrl: Create 'event_filter' files read only if they're not configurable
fs/resctrl: Tidy up the error path in resctrl_mkdir_event_configs()
- Make sure i10nm loads successfully when the ADXL address decoder is absent
because former has decoding capabilities too
- Ensure error reporting is cleanly disabled on driver teardown and on failed
initialization for several legacy Intel EDAC drivers
- Fix a grammar issue in a diagnostic warning in the Sandy Bridge driver
- Fix a missing resource release callback and incorrect memory topology
parsing in the igen6 driver, and add support for Intel Panther Lake-H and
Nova Lake-H SoCs
- Fix an out-of-bounds shift causing undefined behaviour in the Skylake
driver
- Consolidate memory controller register access helpers into shared common
code across the Intel Skylake, Ice Lake, and Meteor Lake drivers
- Introduce sub-channel awareness and Rank Retry Logic improvements to
the Intel Skylake and i10nm drivers in preparation for Diamond Rapids
server support
- Add Rank Retry Logic support for Intel Diamond Rapids server to
imh_edac
- Make In-Band ECC detection registers configurable per SoC in the igen6
driver
- Standardize PCI device ID table definitions across all EDAC drivers to
use named field initializers and standard PCI helper macros
-----BEGIN PGP SIGNATURE-----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=WiqU
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Fix a malformed Kconfig default for the AMD Address Translation
Library
- Make sure i10nm loads successfully when the ADXL address decoder is
absent because former has decoding capabilities too
- Ensure error reporting is cleanly disabled on driver teardown and on
failed initialization for several legacy Intel EDAC drivers
- Fix a grammar issue in a diagnostic warning in the Sandy Bridge
driver
- Fix a missing resource release callback and incorrect memory topology
parsing in the igen6 driver, and add support for Intel Panther Lake-H
and Nova Lake-H SoCs
- Fix an out-of-bounds shift causing undefined behaviour in the Skylake
driver
- Consolidate memory controller register access helpers into shared
common code across the Intel Skylake, Ice Lake, and Meteor Lake
drivers
- Introduce sub-channel awareness and Rank Retry Logic improvements to
the Intel Skylake and i10nm drivers in preparation for Diamond Rapids
server support
- Add Rank Retry Logic support for Intel Diamond Rapids server to
imh_edac
- Make In-Band ECC detection registers configurable per SoC in the
igen6 driver
- Standardize PCI device ID table definitions across all EDAC drivers
to use named field initializers and standard PCI helper macros
* tag 'edac_updates_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras: (22 commits)
EDAC: Consistently define pci_device_ids using named initializers
EDAC/igen6: Add Intel Nova Lake-H SoC support
EDAC/igen6: Make registers for detecting IBECC configurable
EDAC/imh: Add RRL support for Intel Diamond Rapids server
EDAC/{skx_common,i10nm}: Prepare RRL for sub-channel granularity
EDAC/skx_common: Add SubChannel support to ADXL decode
EDAC/{skx_common,i10nm}: Move RRL handling to common code
EDAC/{skx_common,i10nm}: Introduce rrl_ctrl_mode
EDAC/{skx_common,i10nm}: Rename rrl_mode to rrl_source_type
EDAC/{skx_common,skx,i10nm}: Split skx_set_decode()
EDAC/{skx_common,i10nm,imh}: Move MC register access helpers to skx_common
EDAC/{skx_common,skx}: Fix UBSAN shift-out-of-bounds in skx_get_dimm_info
EDAC/igen6: Add one Intel Panther Lake-H SoC support
EDAC/igen6: Fix memory topology parsing for Panther Lake-H SoCs
EDAC/igen6: Fix call trace due to missing release()
EDAC/sb_edac: fix grammar in sb_decode_ddr3 warning
EDAC/i5400: disable error reporting at teardown and refactor helper
EDAC/i5100: disable error reporting at teardown and create helper
EDAC/i5000: disable error reporting at teardown and refactor helper
EDAC/i7300: disable error reporting if init fails and refactor helper
...
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the core
architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections from
the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking secondary
cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmoun+0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFEvB/9scDYXHUCxQOqoRB5TPUi63pgl5vl83IfI
TWE2r2wNsrjqXlAV2FDbzuTWxLpACS+vpk5ltsb57aUfENQ5wZEFCDvJlbpNZuHS
5/zAQmCajPpgC5TFDo7rbgSv2BSR4TXuFfvGS349+a82c9C12EUulBFvR1DDVElh
FCYT5PfHNu1Khas4YiUln+9WSqS8qSHfYsz4Qb/lDaZcAmh22jQBPZQFU7fMlZST
Fr/nzSy6cxkARotqU7RlRQLgtDHBEqTYrNHCP0WSQ2aPJN8SeFUyjEcQas/Zak+S
Bme8OHcqn4pZPll5TfHUTaJp91oIJAA9uX5RSwE+G3NvAGNbptuw
=LXuh
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
