For real CAN interfaces the CAN_CTRLMODE_FD and CAN_CTRLMODE_XL control
modes indicate whether an interface can handle those CAN FD/XL frames.
In the case a CAN XL interface is configured in CANXL-only mode with
disabled error-signalling neither CAN CC nor CAN FD frames can be sent.
The checks are now performed on CAN_RAW sockets to give an instant feedback
to the user when writing unsupported CAN frames to the interface or when
the CAN interface is in read-only mode.
Fixes: 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-4-socketcan@hartkopp.net
[mkl: fix dev reference leak]
Link: https://lore.kernel.org/all/0636c732-2e71-4633-8005-dfa85e1da445@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
caused a sequence of dependency and linker fixes.
Instead of accessing CAN device internal data structures which caused the
dependency problems this patch introduces capability information into the
CAN specific ml_priv data which is accessible from both sides.
With this change the CAN network layer can check the required features and
the decoupling of the driver layer and network layer is restored.
Fixes: 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit 1a620a7238
and its follow-up fixes for the introduced dependency issues.
commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bc ("can: fix build dependency")
commit 5a5aff6338 ("can: fix build dependency")
The entire problem was caused by the requirement that a new network layer
feature needed to know about the protocol capabilities of the CAN devices.
Instead of accessing CAN device internal data structures which caused the
dependency problems a better approach has been developed which makes use of
CAN specific ml_priv data which is accessible from both sides.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7507 6504 64 14075 36fb samples/configfs/configfs_sample.o
After:
=====
text data bss dec hex filename
7827 6184 64 14075 36fb samples/configfs/configfs_sample.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/70c5fd68fcc4d3ba1f18002012fae19acf4ce50b.1767007414.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clock to make sure it is properly configured
Fixes: 8a6b3ca2d3 ("arm64: dts: meson: g12a: add SDIO controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-6-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 4759fd87b9 ("arm64: dts: meson: g12a: add mmc nodes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-5-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 50662499f9 ("ARM64: dts: meson-gx: Use correct mmc clock source 0")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-4-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 221cf34bac ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-3-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
A1 is particular in the way that is already has the mmc clock set
to 24MHz by forcing the mux to select the board crystal. It works
too, it is just slightly less readable.
Align with what is being done with the other Amlogic platforms.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-2-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 520b792e83 ("arm64: dts: amlogic: add some device nodes for C3")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-1-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The mshv driver now uses movable pages for guests. For arm64 guests
to be functional, handle gpa intercepts for arm64 too (the current
code implements handling only for x86).
Move some arch-agnostic functions out of #ifdefs so that they can be
re-used.
Fixes: b9a66cd5cc ("mshv: Add support for movable memory regions")
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
access_ok() expects its first argument to have the __user attribute
since it is checking access to user space. Current code passes an
argument that lacks that attribute, resulting in 'sparse' flagging
the incorrect usage. However, the compiler doesn't generate code
based on the attribute, so there's no actual bug.
In the interest of general correctness and to avoid noise from sparse,
add the __user attribute. No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512141339.791TCKnB-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
vfs_poll() returns a result of type __poll_t, but current code is using
an "unsigned int" local variable. The difference is that __poll_t carries
the "bitwise" attribute. This attribute is not interpreted by the C
compiler; it is only used by 'sparse' to flag incorrect usage of the
return value. The return value is used correctly here, so there's no
bug, but sparse complains about the type mismatch.
In the interest of general correctness and to avoid noise from sparse,
change the local variable to type __poll_t. No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512141339.791TCKnB-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Ensure that a stride larger than 1 (huge page) is only used when page
points to a head of a huge page and both the guest frame number (gfn) and
the operation size (page_count) are aligned to the huge page size
(PTRS_PER_PMD). This matches the hypervisor requirement that map/unmap
operations for huge pages must be guest-aligned and cover a full huge page.
Add mshv_chunk_stride() to encapsulate this alignment and page-order
validation, and plumb a huge_page flag into the region chunk handlers.
This prevents issuing large-page map/unmap/share operations that the
hypervisor would reject due to misaligned guest mappings.
Fixes: abceb4297b ("mshv: Fix huge page handling in memory region traversal")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hv_kmsg_dump() currently skips the panic notification entirely if it
doesn't get any message bytes to pass to Hyper-V due to an error from
kmsg_dump_get_buffer(). Skipping the notification is undesirable because
it leaves the Hyper-V host uncertain about the state of a panic'ed guest.
Fix this by always doing the panic notification, even if bytes_written
is zero. Also ensure that bytes_written is initialized, which fixes a
kernel test robot warning. The warning is actually bogus because
kmsg_dump_get_buffer() happens to set bytes_written even if it fails, and
in the kernel test robot's CONFIG_PRINTK not set case, hv_kmsg_dump() is
never called. But do the initialization for robustness and to quiet the
static checker.
Fixes: 9c318a1d9b ("Drivers: hv: move panic report code from vmbus to hv early init code")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512172103.OcUspn1Z-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Replace cmxchg by cmpxchg.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Add the missing @align and @memmap_on_memory fields to kerneldoc comment
header for struct dev_dax.
Also, some other fields were followed by '-' and others by ':'. Fix all
to be ':' for actual kerneldoc compliance.
Link: https://lkml.kernel.org/r/20260110191804.5739-1-john@groves.net
Fixes: 33cf94d717 ("device-dax: make align a per-device property")
Fixes: 4eca0ef49a ("dax/kmem: allow kmem to add memory with memmap_on_memory")
Signed-off-by: John Groves <john@groves.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 'numa_nodes_parsed' is defined in <asm/numa.h> but this file
is not included in mm/numa_memblks.c (build x86_64) so add this
to the incldues to fix the following sparse warning:
mm/numa_memblks.c:13:12: warning: symbol 'numa_nodes_parsed' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20260108101539.229192-1-ben.dooks@codethink.co.uk
Fixes: 8748270821 ("mm: introduce numa_memblks")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 66bce7afba ("selftests/mm: fix test result reporting in
gup_longterm") introduced a small bug causing unknown filesystems to
always result in a test failure.
This is because do_test() was updated to use a common reporting path, but
this case appears to have been missed.
This is problematic for e.g. virtme-ng which uses an overlayfs file
system, causing gup_longterm to appear to fail each time due to a test
count mismatch:
# Planned tests != run tests (50 != 46)
# Totals: pass:24 fail:0 xfail:0 xpass:0 skip:22 error:0
The fix is to simply change the return into a break.
Link: https://lkml.kernel.org/r/20260106154547.214907-1-lorenzo.stoakes@oracle.com
Fixes: 66bce7afba ("selftests/mm: fix test result reporting in gup_longterm")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel test robot has reported:
BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28
lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0
CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470
Call Trace:
<IRQ>
__dump_stack (lib/dump_stack.c:95)
dump_stack_lvl (lib/dump_stack.c:123)
dump_stack (lib/dump_stack.c:130)
spin_dump (kernel/locking/spinlock_debug.c:71)
do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?)
_raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138)
__free_frozen_pages (mm/page_alloc.c:2973)
___free_pages (mm/page_alloc.c:5295)
__free_pages (mm/page_alloc.c:5334)
tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290)
? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289)
? rcu_core (kernel/rcu/tree.c:?)
rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861)
rcu_core_si (kernel/rcu/tree.c:2879)
handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623)
__irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725)
irq_exit_rcu (kernel/softirq.c:741)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052)
</IRQ>
<TASK>
RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
free_pcppages_bulk (mm/page_alloc.c:1494)
drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632)
__drain_all_pages (mm/page_alloc.c:2731)
drain_all_pages (mm/page_alloc.c:2747)
kcompactd (mm/compaction.c:3115)
kthread (kernel/kthread.c:465)
? __cfi_kcompactd (mm/compaction.c:3166)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork (arch/x86/kernel/process.c:164)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
</TASK>
Matthew has analyzed the report and identified that in drain_page_zone()
we are in a section protected by spin_lock(&pcp->lock) and then get an
interrupt that attempts spin_trylock() on the same lock. The code is
designed to work this way without disabling IRQs and occasionally fail the
trylock with a fallback. However, the SMP=n spinlock implementation
assumes spin_trylock() will always succeed, and thus it's normally a
no-op. Here the enabled lock debugging catches the problem, but otherwise
it could cause a corruption of the pcp structure.
The problem has been introduced by commit 5749077415 ("mm/page_alloc:
leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme
recognizes the need for disabling IRQs to prevent nesting spin_trylock()
sections on SMP=n, but the need to prevent the nesting in spin_lock() has
not been recognized. Fix it by introducing local wrappers that change the
spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places
that do spin_lock(&pcp->lock).
[vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven]
Link: https://lkml.kernel.org/r/20260105-fix-pcp-up-v1-1-5579662d2071@suse.cz
Fixes: 5749077415 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202512101320.e2f2dd6f-lkp@intel.com
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/all/aUW05pyc9nZkvY-1@casper.infradead.org/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A call to mmu_notifier_arch_invalidate_secondary_tlbs() was introduced in
commit e37d5a2d60 ("iommu/sva: invalidate stale IOTLB entries for kernel
address space") but without explicitly adding its corresponding header
file <linux/mmu_notifier.h>. This was evidenced while trying to enable
compile testing support for IOMMU_SVA:
config IOMMU_SVA
select IOMMU_MM_DATA
- bool
+ bool "Shared Virtual Addressing" if COMPILE_TEST
The thing is for certain architectures this header file is indirectly
included via <asm/tlbflush.h>. However, for others such as 32-bit arm the
header is missing and it results in a build failure:
$ make ARCH=arm allmodconfig
[...]
drivers/iommu/iommu-sva.c:340:3: error: call to undeclared function 'mmu_notifier_arch_invalidate_secondary_tlbs' [...]
340 | mmu_notifier_arch_invalidate_secondary_tlbs(iommu_mm->mm, start, end);
| ^
Fix this by including the appropriate header file.
Link: https://lkml.kernel.org/r/20260105190747.625082-1-cmllamas@google.com
Fixes: e37d5a2d60 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Cc: Baolu Lu <baolu.lu@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmsan_free_page() is called by the page allocator's free_pages_prepare()
during page freeing. Its job is to poison all the memory covered by the
page. It can be called with an order-0 page, a compound high-order page
or a non-compound high-order page. But page_size() only works for order-0
and compound pages. For a non-compound high-order page it will
incorrectly return PAGE_SIZE.
The implication is that the tail pages of a high-order non-compound page
do not get poisoned at free, so any invalid access while they are free
could go unnoticed. It looks like the pages will be poisoned again at
allocation time, so that would bookend the window.
Fix this by using the order parameter to calculate the size.
Link: https://lkml.kernel.org/r/20260104134348.3544298-1-ryan.roberts@arm.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now we correctly handle forked faulted/unfaulted merge on mremap(),
exhaustively assert that we handle this correctly.
Do this in the less duplicative way by adding a new merge_with_fork
fixture and forked/unforked variants, and abstract the forking logic as
necessary to avoid code duplication with this also.
Link: https://lkml.kernel.org/r/1daf76d89fdb9d96f38a6a0152d8f3c2e9e30ac7.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The is_mergeable_anon_vma() function uses vmg->middle as the source VMA.
However when merging a new VMA, this field is NULL.
In all cases except mremap(), the new VMA will either be newly established
and thus lack an anon_vma, or will be an expansion of an existing VMA thus
we do not care about whether VMA is CoW'd or not.
In the case of an mremap(), we can end up in a situation where we can
accidentally allow an unfaulted/faulted merge with a VMA that has been
forked, violating the general rule that we do not permit this for reasons
of anon_vma lock scalability.
Now we have the ability to be aware of the fact we are copying a VMA and
also know which VMA that is, we can explicitly check for this, so do so.
This is pertinent since commit 879bca0a2c ("mm/vma: fix incorrectly
disallowed anonymous VMA merges"), as this patch permits unfaulted/faulted
merges that were previously disallowed running afoul of this issue.
While we are here, vma_had_uncowed_parents() is a confusing name, so make
it simple and rename it to vma_is_fork_child().
Link: https://lkml.kernel.org/r/6e2b9b3024ae1220961c8b81d74296d4720eaf2b.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test that mremap()'ing a VMA into a position such that the target VMA on
merge is unfaulted and the source faulted is correctly performed.
We cover 4 cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
target = prev, expand prev to cover.
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
target = next, expand next to cover.
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover.
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover. Essentially equivalent to 3, but
with additional requirement that next's anon_vma is the same as the
copied VMA's.
Each of these are performed with MREMAP_DONTUNMAP set, which will cause a
KASAN assert for UAF or an assert on zero refcount anon_vma if a bug
exists with correctly propagating anon_vma state in each scenario.
Link: https://lkml.kernel.org/r/f903af2930c7c2c6e0948c886b58d0f42d8e8ba3.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted
merge", v2.
Commit 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
However, it is handling merges incorrectly when it comes to mremap() of a
faulted VMA adjacent to an unfaulted VMA. The issues arise in three
cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
This series fixes each of these cases, and introduces self tests to assert
that the issues are corrected.
I also test a further case which was already handled, to assert that my
changes continues to correctly handle it:
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
This bug was discovered via a syzbot report, linked to in the first patch
in the series, I confirmed that this series fixes the bug.
I also discovered that we are failing to check that the faulted VMA was
not forked when merging a copied VMA in cases 1-3 above, an issue this
series also addresses.
I also added self tests to assert that this is resolved (and confirmed
that the tests failed prior to this).
I also cleaned up vma_expand() as part of this work, renamed
vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was
unduly confusing, and simplified the comments around this function.
This patch (of 4):
Commit 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
The key piece of logic introduced was the ability to merge a faulted VMA
immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to
correctly handle anon_vma state.
In the case of the merge of an existing VMA (that is changing properties
of a VMA and then merging if those properties are shared by adjacent
VMAs), dup_anon_vma() is invoked correctly.
However in the case of the merge of a new VMA, a corner case peculiar to
mremap() was missed.
The issue is that vma_expand() only performs dup_anon_vma() if the target
(the VMA that will ultimately become the merged VMA): is not the next VMA,
i.e. the one that appears after the range in which the new VMA is to be
established.
A key insight here is that in all other cases other than mremap(), a new
VMA merge either expands an existing VMA, meaning that the target VMA will
be that VMA, or would have anon_vma be NULL.
Specifically:
* __mmap_region() - no anon_vma in place, initial mapping.
* do_brk_flags() - expanding an existing VMA.
* vma_merge_extend() - expanding an existing VMA.
* relocate_vma_down() - no anon_vma in place, initial mapping.
In addition, we are in the unique situation of needing to duplicate
anon_vma state from a VMA that is neither the previous or next VMA being
merged with.
dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted
case. This leaves four possibilities, in each case where the copied VMA
is faulted:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
target = prev, expand prev to cover.
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
target = next, expand next to cover.
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover.
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover. Essentially equivalent to 3, but
with additional requirement that next's anon_vma is the same as the copied
VMA's. This is covered by the existing logic.
To account for this very explicitly, we introduce
vma_merge_copied_range(), which sets a newly introduced vmg->copied_from
field, then invokes vma_merge_new_range() which handles the rest of the
logic.
We then update the key vma_expand() function to clean up the logic and
make what's going on clearer, making the 'remove next' case less special,
before invoking dup_anon_vma() unconditionally should we be copying from a
VMA.
Note that in case 3, the if (remove_next) ... branch will be a no-op, as
next=src in this instance and src is unfaulted.
In case 4, it won't be, but since in this instance next=src and it is
faulted, this will have required tgt=faulted, src=faulted to be
compatible, meaning that next->anon_vma == vmg->copied_from->anon_vma, and
thus a single dup_anon_vma() of next suffices to copy anon_vma state for
the copied-from VMA also.
If we are copying from a VMA in a successful merge we must _always_
propagate anon_vma state.
This issue can be observed most directly by invoked mremap() to move
around a VMA and cause this kind of merge with the MREMAP_DONTUNMAP flag
specified.
This will result in unlink_anon_vmas() being called after failing to
duplicate anon_vma state to the target VMA, which results in the anon_vma
itself being freed with folios still possessing dangling pointers to the
anon_vma and thus a use-after-free bug.
This bug was discovered via a syzbot report, which this patch resolves.
We further make a change to update the mergeable anon_vma check to assert
the copied-from anon_vma did not have CoW parents, as otherwise
dup_anon_vma() might incorrectly propagate CoW ancestors from the next VMA
in case 4 despite the anon_vma's being identical for both VMAs.
Link: https://lkml.kernel.org/r/cover.1767638272.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/b7930ad2b1503a657e29fe928eb33061d7eadf5b.1767638272.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Reported-by: syzbot+b165fc2e11771c66d8ba@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/694a2745.050a0220.19928e.0017.GAE@google.com/
Reported-by: syzbot+5272541ccbbb14e2ec30@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/694e3dc6.050a0220.35954c.0066.GAE@google.com/
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
crypto_alloc_acomp_node() may return ERR_PTR(), but the fail path checks
only for NULL and can pass an error pointer to crypto_free_acomp(). Use
IS_ERR_OR_NULL() to only free valid acomp instances.
Link: https://lkml.kernel.org/r/20251231074638.2564302-1-pbutsykin@cloudlinux.com
Fixes: 779b9955f6 ("mm: zswap: move allocations during CPU init outside the lock")
Signed-off-by: Pavel Butsykin <pbutsykin@cloudlinux.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-5-sj@kernel.org
Fixes: 9bbb820a5b ("mm/damon/sysfs: support DAMOS quotas")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
quotas/ directory, subdirectories of quotas/ directory are not cleaned up.
As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-4-sj@kernel.org
Fixes: 1b32234ab0 ("mm/damon/sysfs: support DAMOS watermarks")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-3-sj@kernel.org
Fixes: c951cd3b89 ("mm/damon: implement a minimal stub for sysfs-based DAMON interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs: free setup failures generated zombie sub-sub
dirs".
Some DAMON sysfs directory setup functions generates its sub and sub-sub
directories. For example, 'monitoring_attrs/' directory setup creates
'intervals/' and 'intervals/intervals_goal/' directories under
'monitoring_attrs/' directory. When such sub-sub directories are
successfully made but followup setup is failed, the setup function should
recursively clean up the subdirectories.
However, such setup functions are only dereferencing sub directory
reference counters. As a result, under certain setup failures, the
sub-sub directories keep having non-zero reference counters. It means the
directories cannot be removed like zombies, and the memory for the
directories cannot be freed.
The user impact of this issue is limited due to the following reasons.
When the issue happens, the zombie directories are still taking the path.
Hence attempts to generate the directories again will fail, without
additional memory leak. This means the upper bound memory leak is
limited. Nonetheless this also implies controlling DAMON with a feature
that requires the setup-failed sysfs files will be impossible until the
system reboots.
Also, the setup operations are quite simple. The certain failures would
hence only rarely happen, and are difficult to artificially trigger.
This patch (of 4):
When attrs/ DAMON sysfs directory setup is failed after setup of
intervals/ directory, intervals/intervals_goal/ directory is not cleaned
up. As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directory under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251225023043.18579-2-sj@kernel.org
Fixes: 8fbbcbeaaf ("mm/damon/sysfs: implement intervals tuning goal directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If damon_call() is executed against a DAMON context that is not running,
the function returns error while keeping the damon_call_control object
linked to the context's call_controls list. Let's suppose the object is
deallocated after the damon_call(), and yet another damon_call() is
executed against the same context. The function tries to add the new
damon_call_control object to the call_controls list, which still has the
pointer to the previous damon_call_control object, which is deallocated.
As a result, use-after-free happens.
This can actually be triggered using the DAMON sysfs interface. It is not
easily exploitable since it requires the sysfs write permission and making
a definitely weird file writes, though. Please refer to the report for
more details about the issue reproduction steps.
Fix the issue by making two changes. Firstly, move the final
kdamond_call() for cancelling all existing damon_call() requests from
terminating DAMON context to be done before the ctx->kdamond reset. This
makes any code that sees NULL ctx->kdamond can safely assume the context
may not access damon_call() requests anymore. Secondly, let damon_call()
to cleanup the damon_call_control objects that were added to the
already-terminated DAMON context, before returning the error.
Link: https://lkml.kernel.org/r/20251231012315.75835-1-sj@kernel.org
Fixes: 004ded6bee ("mm/damon: accept parallel damon_call() requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: JaeJoon Jung <rgbi3307@gmail.com>
Closes: https://lore.kernel.org/20251224094401.20384-1-rgbi3307@gmail.com
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit a9af76a787 ("watchdog: add sys_info sysctls to dump sys info on
system lockup") adds 'hardlock_sys_info' systcl knob for general kernel
watchdog to control what kinds of system debug info to be dumped on
hardlockup.
Add similar support in powerpc watchdog code to make the sysctl knob more
general, which also fixes a compiling warning in general watchdog code
reported by 0day bot.
Link: https://lkml.kernel.org/r/20251231080309.39642-1-feng.tang@linux.alibaba.com
Fixes: a9af76a787 ("watchdog: add sys_info sysctls to dump sys info on system lockup")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030920.NFKtekA7-lkp@intel.com/
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 6faea3422e ("arch, mm: streamline HIGHMEM freeing") overzealously
removed mem_init_free_highmem() function that beside freeing high memory
pages checked for CPU support for high memory as a prerequisite.
Partially restore mem_init_free_highmem() with a new highmem_init() name
and make it discard high memory in case there is no CPU support for it.
Link: https://lkml.kernel.org/r/20251231105701.519711-1-rppt@kernel.org
Fixes: 6faea3422e ("arch, mm: streamline HIGHMEM freeing")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Jelonek <jelonek.jonas@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Skip processing hugepage kernel arguments (hugepagesz, hugepages, and
default_hugepagesz) when hugepages are not supported by the architecture.
Some architectures may need to disable hugepages based on conditions
discovered during kernel boot. The hugepages_supported() helper allows
architecture code to advertise whether hugepages are supported.
Currently, normal hugepage allocation is guarded by hugepages_supported(),
but gigantic hugepages are allocated regardless of this check. This
causes problems on powerpc for fadump (firmware- assisted dump).
In the fadump (firmware-assisted dump) scenario, a production kernel crash
causes the system to boot into a special kernel whose sole purpose is to
collect the memory dump and reboot. Features such as hugepages are not
required in this environment and should be disabled.
For example, when the fadump kernel boots with the following kernel
arguments:
default_hugepagesz=1GB hugepagesz=1GB hugepages=200
Before this patch, the kernel prints the following logs:
HugeTLB: allocating 200 of page size 1.00 GiB failed. Only allocated 58 hugepages.
HugeTLB support is disabled!
HugeTLB: huge pages not supported, ignoring associated command-line parameters
hugetlbfs: disabling because there are no supported hugepage sizes
Even though the logs state that HugeTLB support is disabled, gigantic
hugepages are still allocated. This causes the fadump kernel to run out
of memory during boot.
After this patch is applied, the kernel prints the following logs for
the same command line:
HugeTLB: hugepages unsupported, ignoring default_hugepagesz=1GB cmdline
HugeTLB: hugepages unsupported, ignoring hugepagesz=1GB cmdline
HugeTLB: hugepages unsupported, ignoring hugepages=200 cmdline
HugeTLB support is disabled!
hugetlbfs: disabling because there are no supported hugepage sizes
To fix the issue, gigantic hugepage allocation should be guarded by
hugepages_supported().
Previously, two approaches were proposed to bring gigantic hugepage
allocation under hugepages_supported():
[1] Check hugepages_supported() in the generic code before allocating
gigantic hugepages
[2] Make arch_hugetlb_valid_size() return false for all hugetlb sizes
Approach [2] has two minor issues:
1. It prints misleading logs about invalid hugepage sizes
2. The kernel still processes hugepage kernel arguments unnecessarily
To control gigantic hugepage allocation, skip processing hugepage kernel
arguments (default_hugepagesz, hugepagesz and hugepages) when
hugepages_supported() returns false.
Note for backporting: This fix is a partial reversion of the commit
mentioned in the Fixes tag and is only valid once the change referenced by
the Depends-on tag is present. When backporting this patch, the commit
mentioned in the Depends-on tag must be included first.
Link: https://lore.kernel.org/all/20250121150419.1342794-1-sourabhjain@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20250128043358.163372-1-sourabhjain@linux.ibm.com/ [2]
Link: https://lkml.kernel.org/r/20251224115524.1272010-1-sourabhjain@linux.ibm.com
Fixes: c2833a5bf7 ("hugetlbfs: fix changes to command line processing")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Depends-on: 2354ad252b ("powerpc/mm: Update default hugetlb size early")
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When page isolation loops indefinitely during memory offline, reading
/proc/sys/vm/percpu_pagelist_high_fraction blocks on pcp_batch_high_lock,
causing hung task warnings.
Make procfs reads lock-free since percpu_pagelist_high_fraction is a
simple integer with naturally atomic reads, writers still serialize via
the mutex.
This prevents hung task warnings when reading the procfs file during
long-running memory offline operations.
[akpm@linux-foundation.org: add comment, per Michal]
Link: https://lkml.kernel.org/r/aS_y9AuJQFydLEXo@tiehlicka
Link: https://lkml.kernel.org/r/20251201060009.1420792-1-aboorvad@linux.ibm.com
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit b74a120bcf ("mm/damon/core: implement
DAMOS_QUOTA_NODE_MEMCG_USED_BP") added accesses to memcg structure without
getting reference to it. This is unsafe. Let's get the reference before
accessing the memcg.
Link: https://lkml.kernel.org/r/20251225002904.139543-1-shakeel.butt@linux.dev
Fixes: b74a120bcf ("mm/damon/core: implement DAMOS_QUOTA_NODE_MEMCG_USED_BP")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the previous kernel enabled KHO but did not call kho_finalize() (e.g.,
CONFIG_LIVEUPDATE=n or userspace skipped the finalization step), the
'preserved-memory-map' property in the FDT remains empty/zero.
Previously, kho_populate() would succeed regardless of the memory map's
state, reserving the incoming scratch regions in memblock. However,
kho_memory_init() would later fail to deserialize the empty map. By that
time, the scratch regions were already registered, leading to partial
initialization and subsequent list corruption (freeing scratch area twice)
during kho_init().
Move the validation of the preserved memory map earlier into
kho_populate(). If the memory map is empty/NULL:
1. Abort kho_populate() immediately with -ENOENT.
2. Do not register or reserve the incoming scratch memory, allowing the new
kernel to reclaim those pages as standard free memory.
3. Leave the global 'kho_in' state uninitialized.
Consequently, kho_memory_init() sees no active KHO context
(kho_in.mem_chunks_phys is 0) and falls back to kho_reserve_scratch(),
allocating fresh scratch memory as if it were a standard cold boot.
Link: https://lkml.kernel.org/r/20251223140140.2090337-1-pasha.tatashin@soleen.com
Fixes: de51999e68 ("kho: allow memory preservation state updates after finalization")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Closes: https://lore.kernel.org/all/20251218215613.GA17304@ranerica-svr.sc.intel.com
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code.
Link: https://lkml.kernel.org/r/20251222205859.3968077-1-shakeel.butt@linux.dev
Fixes: ad41251c29 ("lib/buildid: implement sleepable build_id_parse() API")
Reported-by: syzbot+09b7d050e4806540153d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=09b7d050e4806540153d
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jinchao Wang <wangjinchao600@gmail.com>
Link: https://lkml.kernel.org/r/aUteBPWPYzVWIZFH@ndev
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a brief summary for KFENCE's kernel command-line parameters in
admin-guide/kernel-parameters.
Link: https://lkml.kernel.org/r/20251222150018.1349672-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my old address <szymonwilczek@gmx.com> to my new address
<swilczek.lx@gmail.com>. The old account is no longer accessible due to
provider blocking access.
Link: https://lkml.kernel.org/r/20251221151710.13747-1-swilczek.lx@gmail.com
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/kfence.h:220 function parameter 'slab' not described in '__kfence_obj_info'
Fix it by describing @slab parameter.
Link: https://lkml.kernel.org/r/20251219014006.16328-6-bagasdotme@gmail.com
Fixes: 2dfe63e61c ("mm, kfence: support kmem_dump_obj() for KFENCE objects")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sphinx reports kernel-doc warning:
WARNING: ./mm/vmalloc.c:4284 expecting prototype for vrealloc_node_align_noprof(). Prototype was for vrealloc_node_align() instead
Fix the macro name in vrealloc_node_align_noprof() kernel-doc comment.
Link: https://lkml.kernel.org/r/20251219014006.16328-5-bagasdotme@gmail.com
Fixes: 4c5d336588 ("mm/vmalloc: allow to set node and align in vrealloc")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/textsearch.h:49 struct member 'list' not described in 'ts_ops'
Describe @list member to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-4-bagasdotme@gmail.com
Fixes: 2de4ff7bd6 ("[LIB]: Textsearch infrastructure.")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm kernel-doc fixes".
Here are kernel-doc fixes for mm subsystem. I'm also including textsearch
fix since there's currently no maintainer for include/linux/textsearch.h
(get_maintainer.pl only shows LKML).
This patch (of 4):
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/sched/mm.h:332 function parameter 'flags' not described in 'memalloc_flags_save'
Describe @flags to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-2-bagasdotme@gmail.com
Link: https://lkml.kernel.org/r/20251219014006.16328-3-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 3f6d5e6a46 ("mm: introduce memalloc_flags_{save,restore}")
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This currently isn't supported, and due to a recent commit, it also
cannot easily be supported by io_uring due to hash_node and IOPOLL
completion data overlapping.
This can be revisited if we ever do support cancelations of requests
that have gone to the block stack.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
