Rather than passing struct mac_device_info to the host_irq_status()
method, pass struct stmmac_priv so that we can pass the integrated
PCS to the PCS interrupt handler.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vevHr-00000002YoY-2X2i@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac_pcs_isr() doesn't need to be inlined into the MAC's
host_irq_status method, as handling PCS interrupts isn't performance
critical. However, there is little point calling this function unless
an interrupt is pending for the PCS.
Rename it to stmmac_integrated_pcs_irq() while moving it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vevHm-00000002YoS-23RX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac registers a 32-bit. u32 is unsigned int. The use of BIT() and
GENMASK() leads to integer promotion to unsigned long in expressions
such as:
u32 old = foo;
dev_info(dev, "%08x %08x\n", old, old & BIT(1));
resulting in arg2 being accepted as compatible with the format string
and arg3 warning that the argument does not match (because the former
is unsigned int, and the latter is unsigned long.)
Fix this by defining 32-bit register bits using BIT_U32() and
GENMASK_U32() macros.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vevHh-00000002YoM-1TYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang is unable to inline the memset() calls in net/core/skbuff.c
when initializing allocated sk_buff.
memset(skb, 0, offsetof(struct sk_buff, tail));
This is unfortunate, because:
1) calling external memset_orig() helper adds a call/ret and
typical setup cost.
2) offsetof(struct sk_buff, tail) == 0xb8 = 0x80 + 0x38
On x86_64, memset_orig() performs two 64 bytes clear,
then has to loop 7 times to clear the final 56 bytes.
skbuff_clear() makes sure the minimal and optimal code
is generated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260109203836.1667441-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
r8169: add support for RTL8127ATF (10G Fiber SFP)
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
The PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID.
====================
Link: https://patch.msgid.link/c2ad7819-85f5-4df8-8ecf-571dbee8931b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Link: https://patch.msgid.link/5c390273-458f-4d92-896b-3d85f2998d7d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
This PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID. This PHY driver is used by the RTL8127ATF support in r8169.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e3d55162-210a-4fab-9abf-99c6954eee10@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Motorcomm YT6801 is a PCIe ethernet controller based on DWMAC4 IP. It
integrates an GbE phy, supporting WOL, VLAN tagging and various types
of offloading. It ships an on-chip eFuse for storing various vendor
configuration, including MAC address.
This patch adds basic glue code for the controller, allowing it to be
set up and transmit data at a reasonable speed. Features like WOL could
be implemented in the future.
Signed-off-by: Yao Zi <me@ziyao.cc>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: Runhua He <hua@aosc.io>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Link: https://patch.msgid.link/20260109093445.46791-4-me@ziyao.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YT6801's internal PHY is confirmed as a GMII-capable variant of YT8531S
by a previous series[1] and reading PHY ID. Add support for
PHY_INTERFACE_MODE_GMII for YT8531S to allow the Ethernet driver to
reuse the PHY code for its internal PHY.
Link: https://lore.kernel.org/all/a48d76ac-db08-46d5-9528-f046a7b541dc@motor-comm.com/ # [1]
Co-developed-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260109093445.46791-3-me@ziyao.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "struct alg" object contains a union of 3 xfrm structures:
union {
struct xfrm_algo;
struct xfrm_algo_aead;
struct xfrm_algo_auth;
}
All of them end with a flexible array member used to store key material,
but the flexible array appears at *different offsets* in each struct.
bcz of this, union itself is of variable-sized & Placing it above
char buf[...] triggers:
ipsec.c:835:5: warning: field 'u' with variable sized type 'union
(unnamed union at ipsec.c:831:3)' not at the end of a struct or class
is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
835 | } u;
| ^
one fix is to use "TRAILING_OVERLAP()" which works with one flexible
array member only.
But In "struct alg" flexible array member exists in all union members,
but not at the same offset, so TRAILING_OVERLAP cannot be applied.
so the fix is to explicitly overlay the key buffer at the correct offset
for the largest union member (xfrm_algo_auth). This ensures that the
flexible-array region and the fixed buffer line up.
No functional change.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20260109152201.15668-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment has been around ever since commit 1da177e4c3
("Linux-2.6.12-rc2") and can be removed. Remove it and indent the code
block accordingly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260109121128.170020-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sami Tolvanen says:
====================
While running BPF self-tests with CONFIG_CFI (Control Flow
Integrity) enabled, I ran into a couple of failures in
bpf_obj_free_fields() caused by type mismatches between the
btf_dtor_kfunc_t function pointer type and the registered
destructor functions.
It looks like we can't change the argument type for these
functions to match btf_dtor_kfunc_t because the verifier doesn't
like void pointer arguments for functions used in BPF programs,
so this series fixes the issue by adding stubs with correct types
to use as destructors for each instance of this I found in the
kernel tree.
The last patch changes btf_check_dtor_kfuncs() to enforce the
function type when CFI is enabled, so we don't end up registering
destructors that panic the kernel.
v5:
- Rebased on bpf-next/master again.
v4: https://lore.kernel.org/bpf/20251126221724.897221-6-samitolvanen@google.com/
- Rebased on bpf-next/master.
- Renamed CONFIG_CFI_CLANG to CONFIG_CFI.
- Picked up Acked/Tested-by tags.
v3: https://lore.kernel.org/bpf/20250728202656.559071-6-samitolvanen@google.com/
- Renamed the functions and went back to __bpf_kfunc based
on review feedback.
v2: https://lore.kernel.org/bpf/20250725214401.1475224-6-samitolvanen@google.com/
- Annotated the stubs with CFI_NOSEAL to fix issues with IBT
sealing on x86.
- Changed __bpf_kfunc to explicit __used __retain.
v1: https://lore.kernel.org/bpf/20250724223225.1481960-6-samitolvanen@google.com/
====================
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260110082548.113748-6-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that registered destructor kfuncs have the same type
as btf_dtor_kfunc_t to avoid a kernel panic on systems with
CONFIG_CFI enabled.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-10-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. As bpf_testmod_ctx_release() signature differs from the
btf_dtor_kfunc_t pointer type used for the destructor calls in
bpf_obj_free_fields(), add a stub function with the correct type to
fix the type mismatch.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-9-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the
target function. As bpf_kfree_skb() signature differs from the
btf_dtor_kfunc_t pointer type used for the destructor calls in
bpf_obj_free_fields(), add a stub function with the correct type to
fix the type mismatch.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-8-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/r/20260110082548.113748-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The preinit is to initialize partial MAC hardware needed before
downloading firmware, and then does post-init after firmware runs.
For RTL8922D, initialize some DMAC and CMAC at this step.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-13-pkshih@realtek.com
To enable/disable CMAC function somewhere, separate controls of CMAC power
and function into individual functions. Also correct the hardware settings
by the way.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-12-pkshih@realtek.com
The preload_init is to define preload size from memory to transmitting
buffer. The different generations should call its callback respectively
but suddenly it is missed. However, the register definitions of WiFi 6/7
are the same, things are well. For the coming RTL8922D, settings are
different, so abstract it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-10-pkshih@realtek.com
MPDU quota is to define number of memory used to handle packets in DLE
(Data Link Engine). All chips use the same value before, but the RTL8922D
need to use chip specific value.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-8-pkshih@realtek.com
Use kmemdup_nul() to copy 'name' instead of using memcpy() followed by a
manual NUL termination. Remove the local return variable and the goto
label to simplify the code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Assign timeslot to WiFi if power state is on. Since firmware isn't working
at this moment, write scoreboard register to notify BT. Extend the code to
support two BT for coming chips.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-3-pkshih@realtek.com
The coex scoreboard is to exchange WiFi and BT profiles, and the coming
chip 8922D changes the design including extend to two scoreboards and
individual register for cfg/get. Follow the changes to abstract current
code, but not change logic for existing chips at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260108120320.2217402-2-pkshih@realtek.com
Russell King says:
====================
net: stmmac: cleanups and low priority fixes
Further cleanups and a few low priority fixes:
- Remove duplicated register definitions from header files
- Fix harmless wrong definition used for PTP message type in
descriptors
- Fix norm_set_tx_desc_len_on_ring() off-by-one error (and make
enh_set_tx_desc_len_on_ring() follow a similar pattern.)
Document the buffer size limits. I believe we never call
norm_set_tx_desc_len_on_ring() with 2KiB lengths.
- use u32 rather than unsigned int for 32-bit quantities in
descriptors
- modernise: convert to use FIELD_PREP() rather than separate mask
and shift definitions.
- Reorganise register and register field definitions: registers
defined in address offset order followed by their register field
definitions.
- Remove lots of unused register definitions.
====================
Link: https://patch.msgid.link/aV_q2Kneinrk3Z-W@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Potentially unused definitions were discovered using:
$ for m in $(grep '#define ' $header | sed -e 's,#define[ ]*\([^ ]*\)[ ].*,\1,;s,(.*,,'); do if ! grep -q $m *.c; then echo $m; fi; done
Each was verified, and then removed where truly unused.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtwI-00000002Gu6-1HYu@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arrange the register fields to be after their corresponding register
offset definitions, which groups all the definitions for a register
together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtwD-00000002Gu0-0nTN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many xxx_SHIFT definitions along side their corresponding
xxx_MASK definitions for the various cores. Manually using the
shift and mask can be error prone, as shown with the dwmac4 RXFSTS
fix patch.
Convert sites that use xxx_SHIFT and xxx_MASK directly to use
FIELD_GET(), FIELD_PREP(), and u32_replace_bits() as appropriate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtw8-00000002Gtu-0Hyu@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove many xxx_SHIFT definitions for descriptors, isntead using
FIELD_PREP(), FIELD_GET(), and u32_replace_bits() as appropriate to
manipulate the bitfields. This avoids potential errors where an
incorrect shift is used with a mask.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtw2-00000002Gto-3ZPt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use u32 rather than unsigned int for 32-bit descriptor variables.
This will allow the u32 bitfield helpers to be used. Note, we use
__le32 for the in-memory descriptor structures.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvx-00000002Gth-32RU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
norm_set_tx_desc_len_on_ring() incorrectly tests the buffer length,
leading to a length of 2048 being squeezed into a bitfield covering
bits 10:0 - which results in the buffer 1 size being zero.
If this field is zero, buffer 1 is ignored, and thus is equivalent to
transmitting a zero length buffer.
The path to norm_set_tx_desc_len_on_ring() is only possible when the
hardware does not support enhanced descriptors (plat->enh_desc clear)
which is dependent on the hardware.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvs-00000002Gtb-2U9G@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In dwmac4_wrback_get_rx_status(), the code extracts the PTP message
type from receive descriptor 1 using the dwmac enhanced descriptor
definitions:
message_type = (rdes1 & ERDES4_MSG_TYPE_MASK) >> 8;
This is defined as:
#define ERDES4_MSG_TYPE_MASK GENMASK(11, 8)
The correct definition is RDES1_PTP_MSG_TYPE_MASK, which is also
defined as:
#define RDES1_PTP_MSG_TYPE_MASK GENMASK(11, 8)
Use the correct definition, converting to use FIELD_GET() to extract
it without needing an open-coded shift right that is dependent on the
mask definition.
As this change has no effect on the generated code, there is no need
to treat this as a bug fix.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvn-00000002GtV-1wCS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In dwmac4_debug(), the wrong shift is used with the RXFSTS mask:
#define MTL_DEBUG_RXFSTS_MASK GENMASK(5, 4)
#define MTL_DEBUG_RXFSTS_SHIFT 4
#define MTL_DEBUG_RRCSTS_SHIFT 1
u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK)
>> MTL_DEBUG_RRCSTS_SHIFT;
where rxfsts is tested against small integers 1 .. 3. This results in
the tests always failing, causing the "mtl_rx_fifo__fill_level_empty"
statistic counter to always be incremented no matter what the fill
level actually is.
Fix this by using FIELD_GET() and remove the unnecessary
MTL_DEBUG_RXFSTS_SHIFT definition as FIELD_GET() will shift according
to the least siginificant set bit in the supplied field mask.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvi-00000002GtP-1Os1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac4.h duplicates some of the debug register definitions. Remove
the second copy.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvd-00000002GtJ-0qFI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-09 (ice, ixgbe, idpf)
For ice:
Grzegorz commonizes firmware loading process across all ice devices.
Michal adjusts default queue allocation to be based on
netif_get_num_default_rss_queues() rather than num_online_cpus().
For ixgbe:
Birger Koblitz adds support for 10G-BX modules.
For idpf:
Sreedevi converts always successful function to return void.
Andy Shevchenko fixes kdocs for missing 'Return:' in idpf_txrx.c file.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: Fix kernel-doc descriptions to avoid warnings
idpf: update idpf_up_complete() return type to void
ice: use netif_get_num_default_rss_queues()
ixgbe: Add 10G-BX support
ice: unify PHY FW loading status handler for E800 devices
====================
Link: https://patch.msgid.link/20260109210647.3849008-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
-----BEGIN PGP SIGNATURE-----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=F1n0
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First set of changes for the current -next cycle, of note:
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in
the same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
* tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (120 commits)
wifi: mac80211: remove width argument from ieee80211_parse_bitrates
wifi: mac80211_hwsim: remove NAN by default
wifi: mac80211: improve station iteration ergonomics
wifi: mac80211: improve interface iteration ergonomics
wifi: cfg80211: include S1G_NO_PRIMARY flag when sending channel
wifi: mac80211: unexport ieee80211_get_bssid()
wl1251: Replace strncpy with strscpy in wl1251_acx_fw_version
wifi: iwlegacy: 3945-rs: remove redundant pointer check in il3945_rs_tx_status() and il3945_rs_get_rate()
wifi: mac80211: don't send an unused argument to ieee80211_check_combinations
wifi: libertas: fix WARNING in usb_tx_block
wifi: mwifiex: Allocate dev name earlier for interface workqueue name
wifi: wlcore: sdio: Use pm_ptr instead of #ifdef CONFIG_PM
wifi: cfg80211: Fix use_for flag update on BSS refresh
wifi: brcmfmac: rename function that frees vif
wifi: brcmfmac: fix/add kernel-doc comments
wifi: mac80211: Update csa_finalize to use link_id
wifi: cfg80211: add cfg80211_stop_link() for per-link teardown
wifi: ath12k: Skip DP peer creation for scan vdev
wifi: ath12k: move firmware stats request outside of atomic context
wifi: ath12k: add the missing RCU lock in ath12k_dp_tx_free_txbuf()
...
====================
Link: https://patch.msgid.link/20260112185836.378736-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
