Currently, the ppcnt_statistical_group capability check
incorrectly gates access to FEC histogram statistics.
This capability applies only to statistical and physical
counter groups, not for histogram data.
Restrict the ppcnt_statistical_group check to the
Physical_Layer_Counters and Physical_Layer_Statistical_Counters
groups.
Histogram statistics access remains gated by the pphcr
capability.
The issue is harmless as of today, as it happens that
ppcnt_statistical_group is set on all existing devices that
have pphcr set.
Fixes: 6b81b8a0b1 ("net/mlx5e: Don't query FEC statistics when FEC is disabled")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today multipath offload is controlled by a single route and the route
controlling is selected if it meets one of the following criteria:
1. No controlling route is set.
2. New route destination is the same as old one.
3. New route metric is lower than old route metric.
This can cause unwanted behaviour in case a new route is added
with a smaller network prefix which should get the priority.
Fix this by adding a new criteria to give priority to new route with
a smaller network prefix.
Fixes: ad11c4f1d8 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b2 ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement soft_reset, suspend, and resume callbacks using
genphy_soft_reset(), genphy_suspend(), and genphy_resume()
to fix PHY initialization and power management issues.
The soft_reset callback is needed to properly recover the PHY after an
ifconfig down/up cycle. Without it, the PHY can remain in power-down
state, causing MDIO register access failures during config_init().
The soft reset ensures the PHY is operational before configuration.
The suspend/resume callbacks enable proper power management during
system suspend/resume cycles.
Fixes: b2908a989c ("net: phy: add driver for MaxLinear MxL86110 PHY")
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Link: https://patch.msgid.link/20251223120940.407195-1-stefano.r@variscite.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ping program uses an IPPROTO_ICMP socket to send ICMP_ECHO
messages, ICMP_MIB_OUTMSGS is counted twice.
ping_v4_sendmsg
ping_v4_push_pending_frames
ip_push_pending_frames
ip_finish_skb
__ip_make_skb
icmp_out_count(net, icmp_type); // first count
icmp_out_count(sock_net(sk), user_icmph.type); // second count
However, when the ping program uses an IPPROTO_RAW socket,
ICMP_MIB_OUTMSGS is counted correctly only once.
Therefore, the first count should be removed.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: yuan.gao <yuan.gao@ucloud.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251224063145.3615282-1-yuan.gao@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 15faa1f67a ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it.
Fixes: 528d3f190c ("net: mscc: ocelot: drop the use of the "lags" array")
Signed-off-by: Jerry Wu <w.7erry@foxmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is
incorrectly stripped from frames during egress processing.
br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN
from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also
moves any "next" VLAN from the payload into hwaccel:
/* move next vlan tag to hw accel tag */
__skb_vlan_pop(skb, &vlan_tci);
__vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
For QinQ frames where the C-VLAN sits in the payload, this moves it to
hwaccel where it gets lost during VXLAN encapsulation.
Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only
the hwaccel S-VLAN and leaves the payload untouched.
This path is only taken when vlan_tunnel is enabled and tunnel_info
is configured, so 802.1Q bridges are unaffected.
Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN
preserved in VXLAN payload via tcpdump.
Fixes: 11538d039a ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Alexandre Knecht <knecht.alexandre@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The build can currently fail with
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_add':
bnge_auxr.c:(.text+0x366): undefined reference to `__auxiliary_device_add'
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_init':
bnge_auxr.c:(.text+0x43c): undefined reference to `auxiliary_device_init'
if BNGE is enabled but no other driver pulls in AUXILIARY_BUS.
Select AUXILIARY_BUS in BNGE like in all other drivers which create
an auxiliary_device.
Fixes: 8ac050ec3b ("bng_en: Add RoCE aux device support")
Signed-off-by: Markus Blöchl <markus@blochl.de>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20251228-bnge_aux_bus-v1-1-82e273ebfdac@blochl.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash.
Fixes: 34dd1710f5 ("net: marvell: prestera: Add basic devlink support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20251230052124.897012-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e935 ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
query_cqc() and query_mpt() may return various error codes in
different cases. Return actual error code instead of fixed EINVAL.
Fixes: f2b070f36d ("RDMA/hns: Support CQ's restrack raw ops for hns driver")
Fixes: 3d67e7e236 ("RDMA/hns: Support MR's restrack raw ops for hns driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
Fixes: ffd541d457 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c925 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c925 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
sld_state_show() has a dead str1 below:
if (A) {
...
} else if (B) {
pr_info(... A ? str1 : str2 ...);
}
where A is always false in the second block, implied by the "if (A) else"
pattern. Hence, str2 is always used.
This seems to be some mysterious legacy inherited from the earlier patch
revisions of
ebb1064e7c ("x86/traps: Handle #DB for bus lock").
Earlier revisions¹ did enable both sld and bld at the same time to detect
non-WB bus_locks when split_lock_detect=fatal, but that's no longer true in
the merged revision.
Remove it and translate the pr_info() into its equivalent form.
¹ https://lore.kernel.org/r/20201121023624.3604415-3-fenghua.yu@intel.com
[ bp: Massage commit message; simplify braces ]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251215182907.152881-1-i@rong.moe
The drm_info() function requires the drm/drm_print.h header to be included
first:
In file included from drivers/gpu/drm/pl111/pl111_nomadik.c:7:
drivers/gpu/drm/pl111/pl111_nomadik.h:11:32: error: 'struct drm_device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
11 | void pl111_nomadik_init(struct drm_device *dev);
| ^~~~~~~~~~
drivers/gpu/drm/pl111/pl111_nomadik.c: In function 'pl111_nomadik_init':
drivers/gpu/drm/pl111/pl111_nomadik.c:34:9: error: implicit declaration of function 'drm_info'; did you mean 'pr_info'? [-Wimplicit-function-declaration]
34 | drm_info(dev, "set Nomadik PMU mux to CLCD mode\n");
| ^~~~~~~~
| pr_info
Fixes: a1542b8ca6 ("drm: pl111: replace dev_* print functions with drm_* variants")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eslam Khafagy <eslam.medhat1993@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251223214915.503913-1-arnd@kernel.org
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
* rcu-torture.20260104a:
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
* rcu-tasks-trace.20260101a:
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
rcu: Add noinstr-fast rcu_read_{,un}lock_tasks_trace() APIs
rcu: Move rcu_tasks_trace_srcu_struct out of #ifdef CONFIG_TASKS_RCU_GENERIC
rcu: Clean up after the SRCU-fastification of RCU Tasks Trace
context_tracking: Remove rcu_task_trace_heavyweight_{enter,exit}()
rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast
When kvm.sh is killed, its child processes (make, gcc, qemu, etc.) may
continue running. This prevents new kvm.sh instances from starting even
though the parent is gone.
Add a --kill-previous option that uses fuser(1) to terminate all
processes holding the flock file before attempting to acquire it. This
provides a clean way to recover from stale/zombie kvm.sh runs which
sometimes may have lots of qemu and compiler processes still disturbing.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Add flock-based locking to kvm.sh to prevent multiple instances from
running concurrently on the same source tree. This prevents build
failures caused by one instance's "make clean" deleting generated files
while another instance is building causing build failures.
The lock file is placed in the rcutorture directory and added to
.gitignore.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
A custom 'struct timespec' and 'struct timeval' will be necessary for
64-bit time types on 32-bit architectures. <linux/time.h> will define
other time-related types in terms of the custom 'struct timespec'.
Add custom struct definitions which for now mirror exactly the ones from
the UAPI headers, but provide the foundation for further changes.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-8-c662992f75d7@weissschuh.net
timeval::tv_usec is going to be 64-bit wide even on 32-bit
architectures. As not all architectures support 64-bit multiplications
instructions, calls to libgcc (__multi3()) may be emitted by the
compiler which are not provided by nolibc.
As tv_usec and tv_nsec are guaranteed to always fit into an uint32_t,
perform a 32-bit multiplication instead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-7-c662992f75d7@weissschuh.net
timespec::tv_nsec is going to be 64-bit wide even on 32-bit
architectures. As not all architectures support 64-bit division
instructions, calls to libgcc (__divdi3()) may be emitted by the
compiler which are not provided by nolibc.
As tv_nsec is guaranteed to always fit into an uint32_t, perform a
32-bit division instead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-6-c662992f75d7@weissschuh.net
Make sure to always use the 64-bit safe system calls
in preparation for 64-bit time_t on 32-bit architectures.
Also prevent issues on kernels which disable CONFIG_COMPAT_32BIT_TIME
and therefore don't provide the 32-bit system calls anymore.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-5-c662992f75d7@weissschuh.net
This invocation uses libc types with a system call. While this works
now, upcoming changes to 'struct timeval' would require type
conversions. If types are converted anyways, the clock_gettime() based
fallback can be used everywhere, simplifying the code.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-4-c662992f75d7@weissschuh.net
These implementations use the libc 'struct timeval' with system calls
which can lead to type mismatches. Currently this is fine, but will
break with upcoming changes to 'struct timeval'.
If the structure needs to be converted anyways, the implementations
based on pselect can be used for all architectures. This simplifies the
logic.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-3-c662992f75d7@weissschuh.net
32-bit s390 support was recently removed from nolibc.
If the compiler defaults to 32-bit during the header checks, they fail.
Make sure to always use 64-bit mode for s390 heafer checks.
Fixes: 169ebcbb90 ("tools: Remove s390 compat support")
Acked-by: Willy Tarreau <w@1wt.eu>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20251203-nolibc-headers-check-s390-v1-1-5d35e52a83ba@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add ptrace support, as it will be useful in UML.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[Thomas: drop va_args usage and linux/uio.h inclusion]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
For symmetry with domain_remove_cpu_mon() refactor domain_remove_cpu_ctrl()
to take an early return when removing a CPU does not empty the domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
New telemetry events will be associated with a new package scoped resource
with a new domain structure.
Refactor domain_remove_cpu_mon() so all the L3 domain processing is separate
from the general domain action of clearing the CPU bit in the mask.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The changes to always loads fwsec sb causes problems on newer GPUs
which don't use this path.
Add hooks and pass through the device specific layers.
Fixes: da67179e55 ("drm/nouveau/gsp: Allocate fwsec-sb at boot")
Cc: <stable@vger.kernel.org> # v6.16+
Cc: Lyude Paul <lyude@redhat.com>
Cc: Timur Tabi <ttabi@nvidia.com>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260102041829.2748009-1-airlied@gmail.com
Carve out the resource monitoring domain init code into a separate helper in
order to be able to initialize new types of monitoring domains besides the
usual L3 ones.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Every resctrl resource has a list of domain structures. struct rdt_ctrl_domain
and struct rdt_mon_domain both begin with struct rdt_domain_hdr with
rdt_domain_hdr::type used in validity checks before accessing the domain of
a particular type.
Add the resource id to struct rdt_domain_hdr in preparation for a new monitoring
domain structure that will be associated with a new monitoring resource. Improve
existing domain validity checks with a new helper domain_header_is_valid()
that checks both domain type and resource id. domain_header_is_valid() should
be used before every call to container_of() that accesses a domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
It seems the USB combo SS1 and SS2 ref clocks have another gate, unlike
the SS0. These gates are part of the TCSR clock controller.
At least on Dell XPS 13 (9345), if the ref clock provided by the TCSR
clock controller for SS1 PHY is disabled on the clk_disable_unused late
initcall, the PHY fails to initialize. It doesn't happen on the SS0 PHY
and the SS2 is not used on this device.
This doesn't seem to be a problem on CRD though. It might be that the
RPMh has a vote for it from some other consumer and does not actually
disable it when ther kernel drops its vote.
Either way, these TCSR provided clocks seem to be the correct ones for
the SS1 and SS2, so use them instead.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-dts-qcom-x1e80100-fix-combo-ref-clks-v1-1-f395ec3cb7e8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add changes to support the camera subsystem on the QCS8300.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251107162521.511536-3-quic_vikramsa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing vote clock and GDSC to lpass_smmu node to make sure the
required resources are enabled before attempting to access the hardware.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-adsp-dts-v3-2-d1f1c86e2e6d@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to enable CDSP support for SDM660 SoC:
* add shared memory p2p nodes for CDSP
* add CDSP-specific smmu node
* add CDSP peripheral image loader node
Memory region for CDSP in SDM660 occupies the same spot as
TZ buffer mem defined in sdm630.dtsi (which does not have CDSP).
In sdm660.dtsi replace buffer_mem inherited from SDM630 with
cdsp_region, which is also larger in size.
SDM636 also doesn't have CDSP, so remove inherited from sdm660.dtsi
related nodes and add buffer_mem back.
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-adsp-dts-v3-1-d1f1c86e2e6d@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The backlight on the Hamoa IoT EVK is controlled through a PWM signal.
Aligned with other x1e80100-based platforms: the PWM signal is controlled
by PMK8550, and the backlight enable signal is handled by PMC8380.
Describe the backlight device and connect it to the eDP panel to allow
for brightness control.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251112-hamoa_dvt_backlight-v3-1-f35b44af7fc4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add RED and GREEN LED channels for the RGB device connected to PMC8380C
PWM-LED pins. Omit BLUE channel to match default hardware setup where
it's tied to EDL indicator.
Signed-off-by: Tingguo Cheng <tingguo.cheng@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-add-rgb-led-for-hamoa-iot-evk-v3-1-5df1fcd68374@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
