Commit graph

210,168 commits

Author SHA1 Message Date
françois romieu
87aeec767e r8169: failure to enable mwi should not be fatal
Few (6) network drivers enable mwi explicitly. Fewer worry about a
failure.

It is not a fix but it should avoid some annoyance like
http://bugzilla.kernel.org/show_bug.cgi?id=15454

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Conrad Kostecki <conikost@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 15:36:47 -07:00
Alessio Igor Bogani
b8bc1389b7 ptrace: Cleanup useless header
BKL isn't present anymore into this file thus we can safely remove
smp_lock.h inclusion.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-04-26 23:42:51 +02:00
Jiri Olsa
d7a8d9e907 tracing: Have graph flags passed in to ouput functions
Let the function graph tracer have custom flags passed to its
output functions.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-26 17:30:18 -04:00
Jiri Olsa
9106b69382 tracing: Add ftrace events for graph tracer
Add ftrace events for graph tracer, so the graph output could be shared
with other tracers.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-26 16:55:08 -04:00
Neil Brown
2bc3c1179c nfsd4: bug in read_buf
When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to.  So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.

We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic.  Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.

Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-26 15:39:08 -04:00
Bjorn Helgaas
55051feb57 x86/PCI: never allocate PCI MMIO resources below BIOS_END
When we move a PCI device or assign resources to a device not configured
by the BIOS, we want to avoid the BIOS region below 1MB.  Note that if the
BIOS places devices below 1MB, we leave them there.

See https://bugzilla.kernel.org/show_bug.cgi?id=15744
and https://bugzilla.kernel.org/show_bug.cgi?id=15841

Tested-by: Andy Isaacson <adi@hexapodia.org>
Tested-by: Andy Bailey <bailey@akamai.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-26 12:30:03 -07:00
Dan Carpenter
ad6cca6d5d cifs: change && to ||
This is a typo, if pvolume_info were NULL it would oops.

This function is used in clean up and error handling.  The current code
never passes a NULL pvolume_info, but it could pass a NULL *pvolume_info
if the kmalloc() failed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 19:08:01 +00:00
Jeff Layton
04912d6a20 cifs: rename "extended_security" to "global_secflags"
...since that more accurately describes what that variable holds.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:33 +00:00
Jeff Layton
d00c28de55 cifs: move tcon find/create into separate function
...and out of cifs_mount.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:31 +00:00
Jeff Layton
36988c76f0 cifs: move SMB session creation code into separate function
...it's mostly part of cifs_mount. Break it out into a separate
function.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:28 +00:00
Jeff Layton
a5fc4ce018 cifs: track local_nls in volume info
Add a local_nls field to the smb_vol struct and keep a pointer to the
local_nls in it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:54:54 +00:00
Stefan Hajnoczi
f93830fbb0 perf tools: Fix libdw-dev package name in error message
The headers required for DWARF support are provided by the libdw-dev
package in Debian-based distros.  This patch corrects the elfutils-dev
package name to libdw-dev in the Makefile error message when libdw.h is
not found.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1272292023-9869-1-git-send-email-stefanha@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26 15:39:54 -03:00
Masami Hiramatsu
ef4a356574 perf probe: Add --max-probes option
Add --max-probes option to change the maximum limit of
findable probe points per event, since inlined function can be
expanded into thousands of probe points. Default value is 128.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195640.24664.62984.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26 15:35:20 -03:00
Masami Hiramatsu
5d1ee0413c perf probe: Fix to exit callback soon after finding too many probe points
Fix to exit callback soon after finding too many probe points.
Don't try to continue searching because it already failed.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195632.24664.42598.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26 15:33:08 -03:00
Masami Hiramatsu
15eca306ec perf probe: Fix to use symtab only if no debuginfo
Fix perf probe to use symtab only if there is no debuginfo, because debuginfo
has more information than symtab.

If we can't find a function in debuginfo, we never find it in symtab.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195624.24664.46214.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26 15:32:37 -03:00
Masami Hiramatsu
0ab061cd52 perf tools: Initialize dso->node member in dso__new
If dso->node member is not initialized, it causes a segmentation fault when
adding to other lists.

It should be initilized in dso__new().

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: : <20100421195616.24664.89980.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26 15:31:32 -03:00
YOSHIFUJI Hideaki / 吉藤英明
1fafc7a935 bridge br_multicast: Ensure to initialize BR_INPUT_SKB_CB(skb)->mrouters_only.
Even with commit 32dec5dd02 ("bridge
br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only
without IGMP snooping."), BR_INPUT_SKB_CB(skb)->mrouters_only is
not appropriately initialized if IGMP/MLD snooping support is
compiled and disabled, so we can see garbage.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:26:58 -07:00
YOSHIFUJI Hideaki / 吉藤英明
4eb8b9031a bridge br_multicast: Ensure to initialize BR_INPUT_SKB_CB(skb)->mrouters_only.
Even with commit 32dec5dd02 ("bridge
br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only
without IGMP snooping."), BR_INPUT_SKB_CB(skb)->mrouters_only is
not appropriately initialized if IGMP snooping support is
compiled and disabled, so we can see garbage.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:25:31 -07:00
Denis Turischev
322af98c56 watchdog: sbc_fitpc2_wdt: fixed "scheduling while atomic" bug.
spinlock need to be replaced by mutex because of sleep functions
inside wdt_send_data.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26 18:22:30 +00:00
Steve deRosier
e9bd5bcde7 libertastf: add configurable debug messages
Add the same type of configurable debug messages to libertas_tf as
already exist in the libertas driver.  This has facilitated creation
of a interface specification and will facilitate future development
of this driver.

Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:26 -04:00
Helmut Schaa
9a8b424ea8 rt2x00: rt2800lib: Remove redundant check for RT2872
Remove redundant check for RT2872.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:25 -04:00
Helmut Schaa
23812383c6 rt2x00: rt2800lib: Fix rx path on SoC devices
Restore the rfcsr initialization for RT305x SoC devices which was removed
by "rt2x00: Finish rt3070 support in rt2800 register initialization.".

This fixes the rx path on SoC devices.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:24 -04:00
Helmut Schaa
0bdab171ec rt2x00: fix typo in rt2800.h
Fix a typo in a comment in rt2800.h. Instead of replacing the wrong
hexvalue (0x171c) with the correct one (0x1718) just use the appropriate
readable define.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:24 -04:00
Larry Finger
ce9626eae2 ssb: Make bus registration failure not be silent
In kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register()
fails silently is reported. The cause for the failure is still being
investigated; however, the diagnosis would be easier if the failure
had been reported.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:23 -04:00
Helmut Schaa
5a67396426 rt2x00: rt2800: use tx_power2 in rt2800_config_channel_rf3xxx
Get closer to what the ralink driver does by setting the rf register 13
to tx_power2 during channel switch.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:23 -04:00
Helmut Schaa
2caaa5d36e rt2x00: rt2800lib: disable HT40 for now as it causes reception problems
Disable HT40 support for now as it causes rx problems with HT40 capable
11n APs (when mac80211 enables HT40, rx is completely disfunctional).

Once the rt2800 HT code is capable of using HT40 we should enable the
flag again.

I only tested this patch with a rt305x SoC device, nevertheless the
patch disables HT40 also on PCI and USB rt2800 devices.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:22 -04:00
Sujith
d8f996f6ff ath9k_htc: Really fix device hotunplug
All commands to the target are disabled when the device
is unplugged, but a normal module unload has to be
differentiated from this case, as we could still receive
data in the RX endpoint. Fix this by checking if the
device is attached or not.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:22 -04:00
Sujith
0d36d71da2 ath9k_htc: Fix WMI command race
My patch "ath9k_htc: Handle WMI timeouts properly" introduced
a race condition in WMI command processing. The last issued command
should be stored _before_ issuing a WMI command. Not doing this
would result in the WMI event IRQ dropping correct command responses
as invalid.

Fix this race by storing the command id correctly.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:21 -04:00
Sujith
ba44370175 ath9k_htc: Increase WMI timeout value
Completion of WMI commands take a longer time
on some platforms. Increase the timeout value
to handle this.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:20 -04:00
Sujith
5ab0af3270 ath9k_htc: Process command data properly
When handling the REGIN callback, processing
the incoming data first should be the preferred
mode of operation. Allocation of a new SKB may fail,
in which case, the URB will not be resubmitted.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:20 -04:00
Sujith
62e4716aff ath9k_htc: Use USB reboot
So, apparently there is a USB reboot command
that the target accepts. Using this instead of
usb_reset_device() fixes the issue of "descriptor read error"
that pops up on repeated load/unload.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:19 -04:00
Sujith
f66890724f ath9k_htc: Pass correct private pointer
In the TX callback, the HTC layer has to pass the
priv pointer that was registered during service initialization.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:18 -04:00
Sujith
51f139d567 ath9k_hw: Remove pointless ANI deinit
There is no reason to disable the PHY Error / MIB counters
when the module is being unloaded.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:18 -04:00
Sujith
7073daa63b ath9k_htc: Cancel running timers before disabling HW
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:17 -04:00
Sujith
d5e347bf0f ath9k_htc: Use multiple register writes
This patch fixes a code segment in configpciepowersave()
to make use of multiple register writes.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:17 -04:00
Sujith
a3be14b76d ath9k_htc: Handle device unplug properly
When the USB device has been unplugged, there is
no point in trying to send commands to the target.
Fix this by denying all WMI commands in such a case.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:16 -04:00
Sujith
c11d8f89d3 ath9k_htc: Simplify TX URB management
This patch simplifies URB management for transmission,
by removing the 'FLUSH' variable (which is not needed,
since we can determine if the URB has been killed by
looking at the URB status), and also handling the STOP
case properly.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:16 -04:00
Hans de Goede
d4cde88c1c p54pci: fix regression from prevent stuck rx-ring on slow system
This patch fixes a recently introduced use-after-free regression
from "p54pci: prevent stuck rx-ring on slow system".

Hans de Goede reported a use-after-free regression:
>BUG: unable to handle kernel paging request at 6b6b6b6b
>IP: [<e122284a>] p54p_check_tx_ring+0x84/0xb1 [p54pci]
>*pde = 00000000
>Oops: 0000 [#1] SMP
>EIP: 0060:[<e122284a>] EFLAGS: 00010286 CPU: 0
>EIP is at p54p_check_tx_ring+0x84/0xb1 [p54pci]
>EAX: 6b6b6b6b EBX: df10b170 ECX: 00000003 EDX: 00000001
>ESI: dc471500 EDI: d8acaeb0 EBP: c098be9c ESP: c098be84
> DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
>Process swapper (pid: 0, ti=c098a000 task=c09ccfe0 task.ti=c098a000)
>Call Trace:
> [<e1222b02>] ? p54p_tasklet+0xaa/0xb5 [p54pci]
> [<c0440568>] ? tasklet_action+0x78/0xcb
> [<c0440ed3>] ? __do_softirq+0xbc/0x173

Quote from comment #17:
"The problem is the innocent looking moving of the tx processing to
 after the rx processing in the tasklet. Quoting from the changelog:
  This patch does it the same way, except that it also prioritize
  rx data processing, simply because tx routines *can* wait.

 This is causing an issue with us referencing already freed memory,
 because some skb's we transmit, we immediately receive back, such
 as those for reading the eeprom (*) and getting stats.

 What can happen because of the moving of the tx processing to after
 the rx processing is that when the tasklet first runs after doing a
 special skb tx (such as eeprom) we've already received the answer
 to it.

 Then the rx processing ends up calling p54_find_and_unlink_skb to
 find the matching tx skb for the just received special rx skb and
 frees the tx skb.

 Then after the processing of the rx skb answer, and thus freeing
 the tx skb, we go process the completed tx ring entires, and then
 dereference the free-ed skb, to see if it should free free-ed by
 p54p_check_tx_ring()."

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623
Bug-Identified-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:15 -04:00
Stefan Schmidt
93c0c8b4a5 ieee802154: Fix oops during ieee802154_sock_ioctl
Trying to run izlisten (from lowpan-tools tests) on a device that does not
exists I got the oops below. The problem is that we are using get_dev_by_name
without checking if we really get a device back. We don't in this case and
writing to dev->type generates this oops.

[Oops code removed by Dmitry Eremin-Solenikov]

If possible this patch should be applied to the current -rc fixes branch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:20:32 -07:00
Eric Dumazet
4a4771a58e net: use sk_sleep()
Commit aa395145 (net: sk_sleep() helper) missed three files in the
conversion.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:18:45 -07:00
Jiri Pirko
be9e969d79 pppoe: use pppoe_pernet instead of directly net_generic
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:18:44 -07:00
Jiri Pirko
0db3f0f49a phonet: use phonet_pernet instead of directly net_generic
As in for example pppoe introduce phonet_pernet and use it instead of calling
net_generic directly.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:18:44 -07:00
Hans de Goede
0250ececdf p54pci: fix bugs in p54p_check_tx_ring
Hans de Goede identified a bug in p54p_check_tx_ring:

there are two ring indices. 1 => tx data and 3 => tx management.
But the old code had a constant "1" and this resulted in spurious
dma unmapping failures.

Cc: stable@kernel.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623
Bug-Identified-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:18:42 -04:00
Denis Turischev
fcf1dd7e68 watchdog: sbc_fitpc2_wdt: fixed I/O operations order
There are fitpc2 compatible boards that hang with existent i/o
operations order. Solution is to switch between writing to data
and command ports.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26 18:17:34 +00:00
Andre Detsch
dc8bf1b1a6 tg3: Fix INTx fallback when MSI fails
tg3: Fix INTx fallback when MSI fails

MSI setup changes the value of irq_vec in struct tg3 *tp.
This attribute must be taken into account and restored before
we try to do a new request_irq for INTx fallback.

In powerpc, the original code was leading to an EINVAL return within
request_irq, because the driver was trying to use the disabled MSI
virtual irq number instead of tp->pdev->irq.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:15:49 -07:00
Guenter Roeck
86913315de Watchdog: sb_wdog.c: Fix sibyte watchdog initialization
Watchdog configuration register and timer count register were interchanged,
causing wrong values to be written into both registers.
This caused watchdog triggered resets even if the watchdog was reset in time.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26 18:14:03 +00:00
Juuso Oikarinen
0c86980817 mac80211: Fix sta->last_tx_rate setting with no-op rate control devices
The sta->last_tx_rate is traditionally updated just before transmitting a
frame based on information from the rate control algorithm. However, for
hardware drivers with IEEE80211_HW_HAS_RATE_CONTROL this is not performed,
as the rate control algorithm is not executed, and because the used rate is
not known before the frame has actually been transmitted.

This causes atleast a fixed 1Mb/s to be reported to user space. A few other
instances of code also rely on this information.

Fix this by setting the sta->last_tx_rate in tx_status handling. There, look
for last rates entry set by the driver, and use that as value for
sta->last_tx_rate.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:11:40 -04:00
Alexander Kurz
83bf6f11e8 pcmcia: fix matching rules for pseudo-multi-function cards
Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards:
I changed the code, so that the first matching struct
pcmcia_device_id _PFC_ entry will mark the card has_pfc,
preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match.

[linux-pcmcia@lists.infradead.org: re-order commit message]
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-26 20:09:07 +02:00
Yulia Vilensky
9b9ade6b61 ds2782_battery: Add support for ds2786 battery gas gauge
Signed-off-by: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-26 22:03:42 +04:00
Anton Vorontsov
8ef1bb5392 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-04-26 21:56:19 +04:00