Commit graph

377,253 commits

Author SHA1 Message Date
David Henningsson
3e0d611b20 ALSA: hda - Limit internal mic boost for a few Asus machines
These are being reported as being so noisy at high mic boost levels,
so they are unusable in practice.
Therefore artificially limit the boosts.

BugLink: https://bugs.launchpad.net/bugs/1089795
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-22 14:50:41 +02:00
Axel Lin
0ea34b5786 regulator: palmas: Fix off-by-one for ramp_delay and register value mapping
Datasheet says:
Time Step (TSTEP) selection, when changing the output voltage, the new value is
reached through successive voltage steps (if not bypassed). The equivalent
programmable slew rate of the output voltage is:

TSTEP[1:0]: 00 Jump (no slope control)
TSTEP[1:0]: 01 10mV/us
TSTEP[1:0]: 10 5mV/us (default)
TSTEP[1:0]: 11 2.5mV/us

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 13:34:42 +01:00
Axel Lin
e31089c608 regulator: palmas: Add missing ctrl_addr setting for SMPS10
The ctrl_addr setting for SMPS10 is missed, thus palmas_smps_init() read/write
wrong register for SMPS10 in current code. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 13:27:16 +01:00
Aaron Lu
a50188dae3 acpi: video: enhance the quirk detect logic of _BQC
Currently we decide if the _BQC is using index by first setting the
level to maximum, and then check if _BQC returned maximum; if not, we
say it is using index.

This is not true for some buggy systems, where the _BQC method will
always return a constant value(e.g. 0 or 100 for the two broken system)
and thus break the current logic. So this patch tries to enhance the
quirk detect logic for _BQC: we do this by picking a test_level, it can
be the maximum level or the mininum one based on some condition. And we
don't make the assumption that if _BQC returned a value that is not what
we just set, it must be using an index. Instead, we will compare the
value returned from _BQC and if it doesn't match, see if the returned
value is an index. And if still no, clear the capability of _BQC.

References: https://bugzilla.kernel.org/show_bug.cgi?id=42861
References: https://bugzilla.kernel.org/show_bug.cgi?id=56011
Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Luis Medinas <lmedinas@gmail.com>
Reported-by: Cheppes <cheppes@mailinator.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-22 14:08:32 +02:00
Dave Airlie
f9df7ea33c drm/tegra: Changes for v3.10-rc1
The bulk of this pull-request is the host1x series that has been in the
 works for a few months. The current implementation looks good and has
 been tested by several independent parties. So far no issues have been
 found. To be on the safe side, the new Tegra-specific DRM IOCTLs depend
 on staging in order to give some amount of flexibility to change them
 just in case. The plan is to remove that dependency once more userspace
 exists to verify the adequacy of the IOCTLs.
 
 Currently only the 2D engine is supported, but patches are in the works
 to enable 3D support on top of this framework as well. Various bits of
 open-source userspace exist to test the 2D and 3D support[0]. This is
 still a bit immature but it allows to verify that the kernel interfaces
 work properly.
 
 To round things off there are two smaller cleanup patches, one of them
 adding a new pixel format and the other removing a redundent Kconfig
 dependency.
 
 [0]: https://github.com/grate-driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRdRPlAAoJEN0jrNd/PrOhQZIP/iu6LYuf3AvFi9iCUCX1MgQb
 fSpUJQM9Iv2vjnFoxRCFEqJ8DppRpp01b1tcmdna9NF/j9tiWrHHlnQHWZOpOQn/
 8BnfGeMFCh/5kkrEuIYEnb7QJdEmOpxjSx8E6Z8lUGQxEaajGDzw9P6FrlxsjI7B
 TKeh5pbO3B5nBHwQb0Un2aQodx4STkz1X9UmtdIqSusZor9+Y4Aw7tT0BsIEblen
 K3EUG17kIyqoJcgY0WYY6AiVI7OGn+v7+CRUoHD7SfNymxJAP2O/8lHCa11aZx8f
 Z89TwwO0T6YSNaOo3GwaUXJTv3YANIreYPt80D05z3GfmnQukNy6/ltBfQtaJnKn
 WTwfZtTI+mue1NjRPtkd/MuybiOABa5aeyNBj5IF/dwUYcgUDSV6kibet4eRUVt6
 kncdRTfVgShDMYE7CSGD8Ty58+GUxF8ceZn5G7Qw+81bKqWeeVzCfOnIxSJ17Quw
 X04skLV1+qK4JcwZQyR8AujN/7CXgDMZzM7uQDUUpkEsTXRX3TPSgtoa+zUaeeIg
 iUv72EMZdGSAwzHAHPb3mrJY0JkePjlkVb924/BuPndUpU9GulZ7Z9AHwrBbUamn
 WUlRk0mYvab8GjA21f3cn97VPIo/e4iO98qDj41+t4ARKume7RzVYutvA84tjGUo
 ydRzUef26vIBqxTgKZIC
 =Y+kC
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-3.10' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v3.10-rc1

The bulk of this pull-request is the host1x series that has been in the
works for a few months. The current implementation looks good and has
been tested by several independent parties. So far no issues have been
found. To be on the safe side, the new Tegra-specific DRM IOCTLs depend
on staging in order to give some amount of flexibility to change them
just in case. The plan is to remove that dependency once more userspace
exists to verify the adequacy of the IOCTLs.

Currently only the 2D engine is supported, but patches are in the works
to enable 3D support on top of this framework as well. Various bits of
open-source userspace exist to test the 2D and 3D support[0]. This is
still a bit immature but it allows to verify that the kernel interfaces
work properly.

To round things off there are two smaller cleanup patches, one of them
adding a new pixel format and the other removing a redundent Kconfig
dependency.

[0]: https://github.com/grate-driver

* tag 'drm/tegra/for-3.10' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: don't depend on OF
  drm/tegra: Support the XBGR8888 pixelformat
  drm/tegra: Add gr2d device
  gpu: host1x: drm: Add memory manager and fb
  gpu: host1x: Remove second host1x driver
  gpu: host1x: drm: Rename host1x to host1x_drm
  drm/tegra: Move drm to live under host1x
  gpu: host1x: Add debug support
  gpu: host1x: Add channel support
  gpu: host1x: Add syncpoint wait and interrupts
  gpu: host1x: Add host1x driver
2013-04-22 20:49:07 +10:00
Stephen Warren
e1041ca416 drm/tegra: don't depend on OF
ARCH_TEGRA always enabled OF, so there's no need for any driver to
depend on it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:40:56 +02:00
Thierry Reding
dbe4d9a799 drm/tegra: Support the XBGR8888 pixelformat
While at it, also include the RGB565 pixelformat in the list of formats
supported by overlays.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
2013-04-22 12:40:05 +02:00
Terje Bergstrom
d43f81cbaf drm/tegra: Add gr2d device
Add client driver for 2D device, and IOCTLs to pass work to host1x
channel for 2D.

Also adds functions that can be called to access sync points from
DRM.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:40:04 +02:00
Arto Merilainen
de2ba664c3 gpu: host1x: drm: Add memory manager and fb
This patch introduces a memory manager for tegra drm and moves
existing parts to use it. As cma framebuffer helpers can no more
be used, this patch adds also a separate framebuffer driver for
tegra.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:40:04 +02:00
Terje Bergstrom
692e6d7be8 gpu: host1x: Remove second host1x driver
Remove second host1x driver, and bind tegra-drm to the new host1x
driver. The logic to parse device tree and track clients is moved
to drm.c.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:39:59 +02:00
Arto Merilainen
c89c0ea63f gpu: host1x: drm: Rename host1x to host1x_drm
Both host1x and drm drivers have host1x structures. This patch
renames the host1x structure under drm to follow name host1x_drm.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:39:13 +02:00
Terje Bergstrom
4231c6b01a drm/tegra: Move drm to live under host1x
Make drm part of host1x driver.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:39:11 +02:00
Terje Bergstrom
6236451d83 gpu: host1x: Add debug support
Add support for host1x debugging. Adds debugfs entries, and dumps
channel state to UART in case of stuck job.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:46 +02:00
Terje Bergstrom
6579324a41 gpu: host1x: Add channel support
Add support for host1x client modules, and host1x channels to submit
work to the clients.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:43 +02:00
Terje Bergstrom
7ede0b0bf3 gpu: host1x: Add syncpoint wait and interrupts
Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:42 +02:00
Terje Bergstrom
7547168743 gpu: host1x: Add host1x driver
Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:40 +02:00
Lars-Peter Clausen
a8956908bf ASoC: mxs: Use generic dmaengine PCM
Use the generic dmaengine PCM driver instead of a custom implementation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 11:27:29 +01:00
Lars-Peter Clausen
8c1bb4ecbc ASoC: mxs: Setup dma data in DAI probe
This allows us to access the DAI DMA data when we create the PCM. We'll use
this when converting mxs to generic DMA engine PCM driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 11:27:23 +01:00
Lars-Peter Clausen
57364f9ae2 ASoC: mxs-pcm: Set SNDRV_PCM_INFO_HALF_DUPLEX
The MXS SAIF is only half-duplex so set the SNDRV_PCM_INFO_HALF_DUPLEX flag for
the PCM in order to prevent playback and capture from running at the same time.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 11:27:18 +01:00
Lars-Peter Clausen
d1e1406c6e ASoC: generic-dmaengine-pcm: Add support for half-duplex
Some platforms which are half-duplex share the same DMA channel between the
playback and capture stream. Add support for this to the generic dmaengine PCM
driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-22 11:27:04 +01:00
James Hogan
0b4184c26b metag: avoid unnecessary builtin dtb rebuilds
The builtin .dtb.S intermediate file needs to be marked with .SECONDARY
so that it isn't automatically deleted (which causes it to be
regenerated on every build). Also add *.dtb.S to clean-files so it gets
cleaned up by make clean.

Similarly, if the specified builtin dtb isn't already in dtb-y (e.g.
imported into the tree and specified in CONFIG_METAG_BUILTIN_DTB_NAME)
it too will be treated as an intermediate and deleted automatically
(again causing it to be regenerated on every build), so add it to dtb-y
so it gets added to targets and the dtbs target.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-22 11:23:20 +01:00
Jan Kiszka
d1fa0352a1 KVM: nVMX: VM_ENTRY/EXIT_LOAD_IA32_EFER overrides EFER.LMA settings
If we load the complete EFER MSR on entry or exit, EFER.LMA (and LME)
loading is skipped. Their consistency is already checked now before
starting the transition.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 12:53:52 +03:00
Jan Kiszka
384bb78327 KVM: nVMX: Validate EFER values for VM_ENTRY/EXIT_LOAD_IA32_EFER
As we may emulate the loading of EFER on VM-entry and VM-exit, implement
the checks that VMX performs on the guest and host values on vmlaunch/
vmresume. Factor out kvm_valid_efer for this purpose which checks for
set reserved bits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 12:53:42 +03:00
Laurent Pinchart
ce83adf78b drm: Perform a full mode set when the pixel format changed
Test whether the pixel format changes in the mode set handler, and
perform a full mode set instead of a mode set base if it does.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-22 19:48:30 +10:00
Laurent Pinchart
909d9cda2e drm: Don't allow page flip to change pixel format
A page flip is not a mode set, changing the frame buffer pixel format
doesn't make sense and isn't handled by most drivers anyway. Disallow
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-22 19:48:21 +10:00
Dave Airlie
64c026e28d Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Inki writes:
      This is initial pull request for Exynos. It includes a big change
       that it makes drm_display_mode for timings parameters to be used
       for exynos4 and exynos5 commonly and cleans up unnecessary codes.
       And also it adds device tree support for fimd to get timing values
       and interrupt source from dts file.

       In addition, one more patch, device tree support feature for Exynos
       FIMC, is being reviewed. This patch was posted a little ago like below,
            http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg17568.html

       So we are going to request git pull one more time after reviewed.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: prepare FIMD clocks
  Revert "of/exynos_g2d: Add Bindings for exynos G2D driver"
  drm/exynos: drm_connector: Fix error check condition
  drm/exynos: drm_rotator: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: mixer: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: hdmi: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: change the method for getting the interrupt
  drm/exynos: enable OF_VIDEOMODE and FB_MODE_HELPERS for exynos drm fimd
  drm/exynos: Add display-timing node parsing using video helper function
  drm/exynos: hdmi: move mode_fixup to drm common hdmi
  drm/exynos: hdmi: using drm_display_mode timings for exynos4
2013-04-22 19:47:40 +10:00
Dave Airlie
f0aa848fe5 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
As promised a stash of (mostly) fixes. Two pieces of non-fixes included:
- A notch more gtt refactoring from Ben, beating to death with igt in our
  nightly testing.
- Support for display display-less server chips (again from Ben). New hw
  support which is only likely to break itself ;-)

Otherwise just tons of fixes:
- hpd irq storm mitigation from Egbert Eich. Your -next tree already has
  the infrastructure, this here just supplies the logic.
- sdvo hw state check fix from Egbert Eich
- fb cb tune settings for the pch pll clocks on cpt/ppt
- "Bring a bigger gun" coherence workaround for multi-threade, mulit-core
  & thrashing tiled gtt cpu access from Chris.
- Update haswell mPHY code.
- l3$ caching for context objects on ivb/hsw (Chris).
- dp aux refclock fix for haswell (Jani)
- moar overclocking fixes for snb/ivb (Ben)
- ecobits ppgtt pte caching control fixes from Ville
- fence stride check fixes and limit improvements (Ville)
- fix up crtc force restoring, potentially resulting in tons of hw state
  check WARNs
- OOPS fix for NULL derefencing of fb pointers when force-restoring a crtc
  when other crtcs are disabled and the force-restored crtc is _not_ the
  first one.
- Fix pfit disabling on gen2/3.
- Haswell ring freq scaling fixes (Chris).
- backlight init/teardown fix (failed eDP init killed the lvds backlight)
  from Jani
- cpt/ppt fdi polarity fixes from Paulo (should help a lot of the FDI link
  train failures).
- And a bunch of smaller things all over.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (56 commits)
  drm/i915: fix bpc vs. bpp confusion in intel_crtc_compute_config
  drm/i915: move cpu_transcoder to the pipe configuration
  drm/i915: preserve the PBC bits of TRANS_CHICKEN2
  drm/i915: set CPT FDI RX polarity bits based on VBT
  drm/i915: Add Reenable Timer to turn Hotplug Detection back on (v4)
  drm/i915: Disable HPD interrupt on pin when irq storm is detected (v3)
  drm/i915: Mask out the HPD irq bits before setting them individually.
  drm/i915: (re)init HPD interrupt storm statistics
  drm/i915: Add HPD IRQ storm detection (v5)
  drm/i915: WARN when LPT-LP is not paired with ULT CPU
  drm/i915: don't intel_crt_init on any ULT machines
  drm/i915: remove comment about IVB link training from intel_pm.c
  drm/i915: VLV doesn't have LLC
  drm/i915: Scale ring, rather than ia, frequency on Haswell
  drm/i915: shorten debugfs output simple attributes
  drm/i915: Fixup pfit disabling for gen2/3
  drm/i915: Fixup Oops in the pipe config computation
  drm/i915: ensure single initialization and cleanup of backlight device
  drm/i915: don't touch the PF regs if the power well is down
  drm/i915: add intel_using_power_well
  ...
2013-04-22 18:48:45 +10:00
Daniel Schürmann
b5f035dbca ALSA: snd-usb-audio: set the timeout for usb control set messages to 5000 ms
Set the timeout for USB control set messages according to the USB 2
spec, using the macros from include/linux/usb.h.
The get timout becomes 5000 ms even though it is 500 ms in the
spec. This patch is required to run the Hercules RMX2 which needs a
timeout of 1240 ms.

More notes from author:
I still distinguish between set and get but as long both are 5000 ms
GCC will remove it anyway. IMHO this is more easy read and there is no
need to explain why we use a get timeout for set messages.

Signed-off-by: Daniel Schürmann <daschuer@mixxx.org>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-22 10:45:02 +02:00
Takashi Iwai
47966e9779 ALSA: compress: Use kzalloc() for ioctls writing back data
Like the previous patch by Dan, we should clear the data to be
returned from certain compress ioctls, namely,
snd_compr_get_codec_caps() and snd_compr_get_params().
This time, we can simply replace kmalloc() with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-22 10:40:29 +02:00
Dan Carpenter
1c62e9f2b5 ALSA: compress: info leak in snd_compr_get_caps()
If the ->get_caps() function doesn't clear the buffer then there would
stack information leaked to userspace.  For example,
soc_compr_get_caps() can return success without clearing the buffer.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-22 10:34:46 +02:00
Jacob Shin
94f4db3590 perf/x86/amd: Fix AMD NB and L2I "uncore" support
Borislav Petkov reported a lockdep splat warning about kzalloc()
done in an IPI (hardirq) handler.

This is a real bug, do not call kzalloc() in a smp_call_function_single()
handler because it can schedule and crash.

Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <eranian@google.com>
Cc: <a.p.zijlstra@chello.nl>
Cc: <acme@ghostprotocols.net>
Cc: <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20130421180627.GA21049@jshin-Toonie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-22 10:10:55 +02:00
Jan Kiszka
ea8ceb8354 KVM: nVMX: Fix conditions for NMI injection
The logic for checking if interrupts can be injected has to be applied
also on NMIs. The difference is that if NMI interception is on these
events are consumed and blocked by the VM exit.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 11:10:49 +03:00
Jan Kiszka
2505dc9fad KVM: VMX: Move vmx_nmi_allowed after vmx_set_nmi_mask
vmx_set_nmi_mask will soon be used by vmx_nmi_allowed. No functional
changes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 11:10:49 +03:00
Andrew Honig
27469d29b3 KVM: x86: Fix memory leak in vmx.c
If userspace creates and destroys multiple VMs within the same process
we leak 20k of memory in the userspace process context per VM.  This
patch frees the memory in kvm_arch_destroy_vm.  If the process exits
without closing the VM file descriptor or the file descriptor has been
shared with another process then we don't free the memory.

It's still possible for a user space process to leak memory if the last
process to close the fd for the VM is not the process that created it.
However, this is an unexpected case that's only caused by a user space
process that's misbehaving.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 11:02:38 +03:00
Wei Yongjun
f179735921 KVM: x86: fix error return code in kvm_arch_vcpu_init()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:56:44 +03:00
Antonio Quartulli
dd981ab091 batman-adv: use the proper header len when checking the TTVN
Unicast packet might be of type either UNICAST or
UNICAST4ADDR.
In the two cases the header size is different, but the
mechanism checking the TTVN field was assuming it to be
always of the same type (UNICAST), so failing to access the
inner Ethernet header in case of UNICAST4ADDR.

Fix this by passing the real header length as argument.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-22 09:55:23 +02:00
Abel Gordon
8a1b9dd000 KVM: nVMX: Enable and disable shadow vmcs functionality
Once L1 loads VMCS12 we enable shadow-vmcs capability and copy all the VMCS12
shadowed fields to the shadow vmcs.  When we release the VMCS12, we also
disable shadow-vmcs capability.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:55 +03:00
Abel Gordon
012f83cb2f KVM: nVMX: Synchronize VMCS12 content with the shadow vmcs
Synchronize between the VMCS12 software controlled structure and the
processor-specific shadow vmcs

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:45 +03:00
Abel Gordon
c3114420d1 KVM: nVMX: Copy VMCS12 to processor-specific shadow vmcs
Introduce a function used to copy fields from the software controlled VMCS12
to the processor-specific shadow vmcs

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:37 +03:00
Abel Gordon
16f5b9034b KVM: nVMX: Copy processor-specific shadow-vmcs to VMCS12
Introduce a function used to copy fields from the processor-specific shadow
vmcs to the software controlled VMCS12

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:24 +03:00
Abel Gordon
e7953d7fab KVM: nVMX: Release shadow vmcs
Unmap vmcs12 and release the corresponding shadow vmcs

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:17 +03:00
Abel Gordon
8de4883370 KVM: nVMX: Allocate shadow vmcs
Allocate a shadow vmcs used by the processor to shadow part of the fields
stored in the software defined VMCS12 (let L1 access fields without causing
exits). Note we keep a shadow vmcs only for the current vmcs12.  Once a vmcs12
becomes non-current, its shadow vmcs is released.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:10 +03:00
Abel Gordon
145c28dd19 KVM: nVMX: Fix VMXON emulation
handle_vmon doesn't check if L1 is already in root mode (VMXON
was previously called). This patch adds this missing check and calls
nested_vmx_failValid if VMX is already ON.
We need this check because L0 will allocate the shadow vmcs when L1
executes VMXON and we want to avoid host leaks (due to shadow vmcs
allocation) if L1 executes VMXON repeatedly.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:52:01 +03:00
Abel Gordon
20b97feaf6 KVM: nVMX: Refactor handle_vmwrite
Refactor existent code so we re-use vmcs12_write_any to copy fields from the
shadow vmcs specified by the link pointer (used by the processor,
implementation-specific) to the VMCS12 software format used by L0 to hold
the fields in L1 memory address space.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:51:44 +03:00
Abel Gordon
4607c2d7a2 KVM: nVMX: Introduce vmread and vmwrite bitmaps
Prepare vmread and vmwrite bitmaps according to a pre-specified list of fields.
These lists are intended to specifiy most frequent accessed fields so we can
minimize the number of fields that are copied from/to the software controlled
VMCS12 format to/from to processor-specific shadow vmcs. The lists were built
measuring the VMCS fields access rate after L2 Ubuntu 12.04 booted when it was
running on top of L1 KVM, also Ubuntu 12.04. Note that during boot there were
additional fields which were frequently modified but they were not added to
these lists because after boot these fields were not longer accessed by L1.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:51:34 +03:00
Abel Gordon
abc4fc58c5 KVM: nVMX: Detect shadow-vmcs capability
Add logic required to detect if shadow-vmcs is supported by the
processor. Introduce a new kernel module parameter to specify if L0 should use
shadow vmcs (or not) to run L1.

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:51:21 +03:00
Abel Gordon
89662e566c KVM: nVMX: Shadow-vmcs control fields/bits
Add definitions for all the vmcs control fields/bits
required to enable vmcs-shadowing

Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-22 10:51:09 +03:00
Gleb Natapov
d10ab869ae Merge git://github.com/agraf/linux-2.6.git kvm-ppc-next into queue 2013-04-22 10:38:15 +03:00
Rusty Russell
6b39271746 lguest: map Switcher below fixmap.
Now we've adjusted all the code, we can simply set switcher_addr to
wherever it needs to go below the fixmaps, rather than asserting that
it should be so.

With large NR_CPUS and PAE, people were hitting the "mapping switcher
would thwack fixmap" message.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:03 +09:30
Rusty Russell
6d0cda93c0 lguest: cache last cpu we ran on.
This optimizes the frobbing of our Switcher map.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:03 +09:30