Commit graph

89,737 commits

Author SHA1 Message Date
Peter Korsgaard
77b6901573 dm9601: Fix printk
A printk in the error handling code of dm9601.c was missing a newline.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 21:02:53 -05:00
Ayaz Abdulla
9e555930bd forcedeth boot delay fix
Fix a long boot delay in the forcedeth driver.  During initialization, the
timeout for the handshake between mgmt unit and driver can be very long.
The patch reduces the timeout by eliminating a extra loop around the
timeout logic.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9308

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Alex Howells <astinus@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 20:59:59 -05:00
Ayaz Abdulla
490dde8990 forcedeth: new mcp79 pci ids
This patch adds new device ids and features for mcp79 devices into the
forcedeth driver.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23 20:54:01 -05:00
Benjamin Herrenschmidt
61dbcecef5 ibm_newemac: Fix possible lockup on close
It's a bad idea to call flush_scheduled_work from within a
netdev->stop because the linkwatch will occasionally take the
rtnl lock from a workqueue context, and thus that can deadlock.

This reworks things a bit in that area to avoid the problem.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 20:52:09 -05:00
Alan Cox
91e33d3109 pata_isapnp: Polled devices
If a card has no IRQ then pass no interrupt handler but allow polled
usage.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
22d5c760c8 pata_hpt37x: Fix cable detect bug spotted by Sergei
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
498222f323 pata_ali: Lots of problems still showing up with small ATAPI DMA
Hopefully there is a better long term solution but for now lets favour
reliability.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
8f59a13acc pata_ali: Add Mitac 8317 and derivatives
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Alan Cox
92c52c52e1 libata-core: List more documentation sources for reference
And next time I'll be able to find the ata tape spec easily...

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Alan Cox
c47a631f8b ata_piix: Invalid use of writel/readl with iomap
Should use ioread* as discussed previously

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Tejun Heo
93e2618e0c sata_sil24: fix sg table sizing
sil24 unnecessarily used LIBATA_MAX_PRD and ATAPI sg table was short
by one entry which might cause very obscure problems.  This patch
updates sg table sizing such that

* One full page is used for PRB + sg table.  On 4k page,
  this results in 253 sg's.

* Make ATAPI sg block properly sized.

* Make build fail if command block size doesn't equal PAGE_SIZE.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Tejun Heo
0706efd61e pata_jmicron: fix disabled port handling in jmicron_pre_reset()
There are two bugs in disabled port handling.

* test in PORT_PATA0 is reversed
* ->prereset should return -ENOENT for disabled ports not 0

The first bug makes the PATA channel considered disabled but the
second bug saves the day by returning 0.  The net result is that cable
is always left at ATA_CBL_UNKNOWN.  This results in false 80c
configuration and thus transfer errors.

This patch fixes both bugs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Sergei Shtylyov
dd05c199cd pata_sil680: kill bogus reset code (take 2)
Since writing to two reserved bits ain't much of a housekeeping, I think it's
time we get rid of the custom error handler in this driver. ;-)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Alexey Korolev
b1c9c9be6d [MTD] [NOR] Support Intel P3x flash support with CFI version 1.5
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-23 09:35:41 +00:00
Herbert Valerio Riedel
6a2e391190 Input: gpio-keys - request and configure GPIOs
Currently, gpio_keys.c assumes the GPIOs to be already properly configured;
this patch changes gpio-keys to perform explicit calls to gpio_request() and
gpio_configure_input().

This matches the behaviour of leds-gpio.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-21 14:42:33 -05:00
Jiri Kosina
8bf4215e8a Input: i8042 - add i8042.noloop quirk for MS Virtual Machine
When booting under Microsoft Virtual Machine, the noloop quirk is
needed, otherwise PS/2 mouse is not properly detected.

Reported-by: Lawrence Steeger <vendor@russte.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-21 14:17:38 -05:00
Dmitry Torokhov
3cb93db6e8 Sonypi: use synchronize_irq instead of sycnronize_sched
We know exactly what IRQ we are using, so synchronize_irq()
suits much better. Plus synchronize_sched() will not work
for us in -rt kernels.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mattia Dongili <malattia@linux.it>
2007-11-21 14:16:38 -05:00
Dmitry Torokhov
dcf65cd41c sonypi: fit input devices into sysfs tree
Properly set up parent on input devices registered by sonypi.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mattia Dongili <malattia@linux.it>
2007-11-21 14:16:16 -05:00
Dmitry Torokhov
2e4d242ce7 sony-laptop: fit input devices into sysfs tree
Properly set up parent on input devices registered by sony-laptop.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mattia Dongili <malattia@linux.it>
2007-11-21 14:15:53 -05:00
David Woodhouse
1dff314451 mmc: Avoid re-using minor numbers before the original device is closed.
Move the code which marks the minor number as free to mmc_blk_put() so
that it happens on the final close() (or removal), instead of doing it
at removal even when the device is still logically open.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-21 18:45:38 +01:00
Alex Dubov
b37a05069b tifm_sd: handle non-power-of-2 block sizes
It is possible to handle arbitrary block sizes with tifm card reader by
conditionally switching to PIO in case such block has to be delivered. At
the beginning of each request, DMA is either disabled (non-power-of-2 block
size) or set to load time user preference.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-21 18:42:45 +01:00
Pierre Ossman
d198f10198 mmc_block: check card state after write
Some cards have been reported to signal that they're ready prematurely.
Checking both the busy bit and card state solves the issue.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-21 18:40:53 +01:00
Sonic Zhang
759eb04090 Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly
Output as many bytes as possible in PIO tx handler.
This reduce the number of tx interrupts and shorten the delay to handle
rx interrupt. So, rx overrun disappears.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 17:00:32 +08:00
Rafael J. Wysocki
cb43c54ca0 Freezer: Fix APM emulation breakage
The APM emulation is currently broken as a result of commit
8314418629
"Freezer: make kernel threads nonfreezable by default"
that removed the PF_NOFREEZE annotations from apm_ioctl() without adding
the appropriate freezer hooks.  Fix it and remove the unnecessary variable flags
from apm_ioctl().

Special thanks to Franck Bui-Huu <vagabon.xyz@gmail.com> for pointing out the
problem.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 22:28:20 -05:00
Len Brown
a3f095ade0 Pull bugzilla-9327 into release branch
Conflicts:

	drivers/acpi/ec.c

Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 20:07:49 -05:00
Alexey Starikovskiy
e790cc8bbb ACPI: EC: Workaround for optimized controllers (version 3)
Some controllers fail to send confirmation GPE after address or data write.
Detect this and don't expect such confirmation in future.
This is a generalization of previous workaround
(66c5f4e736), which did only read address.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9327

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Romano Giannetti <romano.giannetti@gmail.com>
Tested-by: Mats Johannesson
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 20:06:15 -05:00
Márton Németh
3ebe08a749 ACPI: EC: use printk_ratelimit(), add some DEBUG mode messages
Sometimes it is usefull to see raw protocol dump.
Uncomment '#define DEBUG' at the beginning of file to make EC
really verbose.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 20:04:39 -05:00
Len Brown
0af2f653c5 Revert "ACPI: EC: Workaround for optimized controllers"
This reverts commit f2d68935ba.
2007-11-20 19:59:08 -05:00
Gary Hade
6ce7641b87 ACPI: acpiphp: Remove dmesg spam on device remove
In cases where acpi_pci_bind() does not
attach device data, acpi_pci_unbind()
complains via an ACPI exception about the missing data when
the device is removed.  For example, acpi_pci_bind() does not
attach data for non-existent device functions so when the device
is removed using the ACPI PCI hotplug driver 'acpiphp' an ACPI
exception is logged for every non-existent function.  This patch
avoids the confusing log messages by removing the unnecessary
ACPI exception.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 19:06:04 -05:00
Jack Morgenstein
9ed87fd34c mlx4_core: Fix state check in mlx4_qp_modify()
When checking the states passed in, mlx4_qp_modify() accidentally checks
cur_state twice rather than checking cur_state and new_state.  Fix this
to make sure that both values are in-bounds.

Since these values may be passed in from userspace, this bug results in
userspace being able to trigger an oops.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: stable <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 13:01:28 -08:00
Ralph Campbell
4187b915a0 IB/ipath: Normalize error return codes for posting work requests
The error codes for ib_post_send(), ib_post_recv(), and ib_post_srq_recv()
were inconsistent. Use EINVAL for too many SGEs and ENOMEM for too many
WRs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:05:42 -08:00
Ralph Campbell
14de986a0b IB/ipath: Fix offset returned to ibv_modify_srq()
The wrong offset was being returned to libipathverbs so that when
ibv_modify_srq() calls mmap(), it always fails.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:04:41 -08:00
Ralph Campbell
8a278e6d57 IB/ipath: Fix error path in QP creation
This patch fixes the code which frees the partially allocated QP
resources if there was an error while creating the QP. In particular,
the QPN wasn't deallocated and the QP wasn't removed from the hash
table.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:04:10 -08:00
Ralph Campbell
fb74dacb0f IB/ipath: Fix offset returned to ibv_resize_cq()
The wrong offset was being returned to libipathverbs so that when
ibv_resize_cq() calls mmap(), it always fails.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:03:26 -08:00
Zhang Rui
a7f9b1f249 ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type --
WAKE, WAKE_RUN, and RUNTIME.  An error is returned
if we are asked to disable a GPE that has no type.

But at least one system exists that enables a GPE from AML
that is not the EC GPE, and has no _Lxx/_Exx AML handler,
and is thus never initialized.

In this case, when an external CRT is plugged in,
the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.

The fix is to disable a firing GPE,
even if it comes from outer space.

http://bugzilla.kernel.org/show_bug.cgi?id=6217

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 13:42:03 -05:00
Cornelia Huck
c5d4a9997b [S390] cio: Register/unregister subchannels only from kslowcrw.
Make sure all subchannel handling is done on the slow path workqueue
so that we don't have races between an old subchannel unregistering
and a new subchannel with the same name registering.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 11:13:49 +01:00
Peter Oberparleiter
3b8c88993e [S390] cio: change device sense procedure to work with pav aliases
Modify the sense id channel program to allow device sensing of pav
alias devices which belong to a base device with ungrouped paths.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 11:13:44 +01:00
Len Brown
e6532b8883 Pull fluff into release branch
Conflicts:

	drivers/acpi/ec.c

Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 01:21:47 -05:00
Len Brown
d89a9bda14 Pull video-2.6.24 into release branch 2007-11-20 01:20:57 -05:00
Len Brown
d12dbbfe94 Pull thinkpad-2.6.24 into release branch 2007-11-20 01:20:42 -05:00
Len Brown
614a6bbecc Pull thermal into release branch 2007-11-20 01:20:31 -05:00
Len Brown
c2e46d2e2a Pull procfs-default into release branch
Conflicts:

	drivers/acpi/sbs.c

Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 01:20:00 -05:00
Len Brown
95b00786f3 Pull cpuidle into release branch 2007-11-20 01:18:37 -05:00
Len Brown
22201f7402 Pull bugzilla-9327 into release branch 2007-11-20 01:18:19 -05:00
Len Brown
5824b45126 Pull bugzilla-9262 into release branch 2007-11-20 01:18:07 -05:00
Len Brown
7833b4ae46 Pull bugzilla-9153 into release branch 2007-11-20 01:17:54 -05:00
Len Brown
86533e80e0 Pull battery into release branch 2007-11-20 01:17:42 -05:00
Shaohua Li
61fd47e0c8 ACPI: fix two IRQ8 issues in IOAPIC mode
Use mp_irqs[] to get PNP device's interrupt polarity and trigger.
There are two reasons to do this:
1. BIOS bug for PNP interrupt
2. BIOS explictly does override
mp_irqs[] should cover all the cases.

http://bugzilla.kernel.org/show_bug.cgi?id=5243
http://bugzilla.kernel.org/show_bug.cgi?id=7679
http://bugzilla.kernel.org/show_bug.cgi?id=9153

[lenb: fixed !IOAPIC and 64-bit !SMP builds]

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 01:16:29 -05:00
len.brown@intel.com
60555e371d ACPI: CONFIG_CPU_IDLE=ACPI by default
In Linux-2.6.24, CPU_IDLE went upstream, default =n.
For Linux-2.6.25, enable it by default on ACPI systems.
For Linux-2.6.26, we plan to enable it always on ACPI systems.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-19 22:22:37 -05:00
Joe Perches
4fdb2a05ef ACPI: Add missing spaces to printk format
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-19 21:53:32 -05:00