Commit graph

89,737 commits

Author SHA1 Message Date
Greg Kroah-Hartman
df23fa01ac USB: Driver to charge USB blackberry devices
A simple driver to turn on the charging capability of a USB BlackBerry
device when it is plugged into the machine.  It does not bind to the
device, so all userspace programs can still sync properly with it.

Note, if CONFIG_USB_SUSPEND is enabled, it can play havoc with this
device as the power to the port will be shut down.  This device id will
have to be added to the global blacklist table when it is created.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:32:17 -08:00
Alan Stern
8903795a52 EHCI: turn off remote wakeup during shutdown
This patch (as850b) disables remote wakeup (and everything else!) on
all EHCI ports when the shutdown() method is called.  If remote wakeup
is left active then some systems will reboot instead of powering off.
This fixes Bugzilla #7828.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:32:17 -08:00
Roland Dreier
7084f8429c IB/core: Set static rate in ib_init_ah_from_path()
The static rate from the path record should be put into the address
vector -- a long time ago the rate in the address attributes needed to
be a relative rate, which required more munging, but now that the
conversion from absolute to relative is done in the low-level driver,
it's easy for ib_init_ah_from_path() to put the absolute rate in.

Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 15:31:24 -08:00
Brice Goglin
81bb0e198b PCI: Make PCI device numa-node attribute visible in sysfs
Export the numa-node attribute of PCI devices in sysfs so that
user applications may choose where to be placed accordingly.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:11 -08:00
Andreas Block
691cd0c2ee PCI: PCI devices get assigned redundant IRQs
I'm currently working on a port to a CPCI board with a MPC5200.  When
testing the PCI interrupt routing, I discovered the following: Even devices
which don't use interrupts (-> PCI Spec.: Interrupt Pin Register is zero),
get an interrupt assigned (this is at least true for most of the
PPC-targets I looked at).

The cause is pretty obvious in drivers/pci/setup-irq.c.  I guess at least
in an ideal world with correctly designed hardware, the code should rather
look as in the patch below.

Of course it doesn't hurt anybody to have an unuseable IRQ assigned to a
PCI-to-PCI-bridge (or something alike), but to me it seems a bit strange. 
Please correct me, if I'm mislead.

The patch below is tested on the above mentioned CPCI-MPC5200 board and is
compiler tested with the latest git-repository kernel on x86.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Atsushi Nemoto
4516a618a7 PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options
CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size might
result in allocation failure for the reserving itself on some platforms
(for example typical 32bit MIPS).  Make it (and CARDBUS_IO_SIZE too)
customizable by "pci=" option for such platforms.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Randy Dunlap
f95d882d81 PCI/sysfs/kobject kernel-doc fixes
Fix kernel-doc warnings in PCI, sysfs, and kobject files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Alexey Dobriyan
e4a3c3f095 pcmcia: some class_device fallout
As found on some arm defconfigs.

I only looked at how original patch changes things and other patches fix
compilation. ;-)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:18 -08:00
Andrew Morton
4aca67e5f5 Driver core: device_add_attrs() cleanup
Clean up the coding in device_add_attrs() a bit.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:18 -08:00
Mariusz Kozlowski
b92be9f1ec Driver: remove redundant kobject_unregister checks
Here is a patch that removes all redundant kobject_unregister argument checks.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:17 -08:00
Sergei Organov
bb289bc46f serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.
Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:16 -08:00
Roland Dreier
630e61f2fa IB/ipath: Make ipath_map_sg() static
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:58:08 -08:00
Roland Dreier
38abaa63bf IB/core: Fix sparse warnings about shadowed declarations
Change a couple of variable names to avoid sparse warnings about
symbols being shadowed.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:41:14 -08:00
Sean Hefty
c8f6a362bf RDMA/cma: Add multicast communication support
Extend rdma_cm to support multicast communication.  Multicast support
is added to the existing RDMA_PS_UDP port space, as well as a new
RDMA_PS_IPOIB port space.  The latter port space allows joining the
multicast groups used by IPoIB, which enables offloading IPoIB traffic
to a separate QP.  The port space determines the signature used in the
MGID when joining the group.  The newly added RDMA_PS_IPOIB also
allows for unicast operations, similar to RDMA_PS_UDP.

Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized,
since we can no longer assume that the qkey is constant.  This requires
saving the Q_Key to use when attaching to a device, so that it is
available when creating the QP.  The Q_Key information is exported to
the user through the existing rdma_init_qp_attr() interface.

Multicast support is also exported to userspace through the rdma_ucm.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:29:07 -08:00
Sean Hefty
faec2f7b96 IB/sa: Track multicast join/leave requests
The IB SA tracks multicast join/leave requests on a per port basis and
does not do any reference counting: if two users of the same port join
the same group, and one leaves that group, then the SA will remove the
port from the group even though there is one user who wants to stay a
member left.  Therefore, in order to support multiple users of the
same multicast group from the same port, we need to perform reference
counting locally.

To do this, add an multicast submodule to ib_sa to perform reference
counting of multicast join/leave operations.  Modify ib_ipoib (the
only in-kernel user of multicast) to use the new interface.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:20:02 -08:00
Michael S. Tsirkin
8a2e65f87c IPoIB: CM error handling thinko fix
ipoib_cm_alloc_rx_skb() might be called from IRQ context, so it must
use dev_kfree_skb_any(), not kfree_skb().

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Steve Wise
c52daa2976 RDMA/cxgb3: Remove Open Grid Computing copyrights in iw_cxgb3 driver
Remove the Open Grid Computing copyright.  It shouldn't be there.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Steve Wise
a1a750523b RDMA/cxgb3: Fail posts synchronously when in TERMINATE state
For T3B devices, mark user QP in error once we transition
to TERMINATE.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Steve Wise
ebb90986e1 RDMA/iwcm: iw_cm_id destruction race fixes
iwcm iw_cm_id destruction race condition fixes:

- iwcm_deref_id() always wakes up if there's another reference.
- clean up race condition in cm_work_handler().
- create static void free_cm_id() which deallocs the work entries and then
  kfrees the cm_id memory.  This reduces code replication.
- rem_ref() if this is the last reference -and- the IWCM owns freeing the
  cm_id, then free it.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Hoang-Nam Nguyen
6bbcea0d42 IB/ehca: Change query_port() to return LINK_UP instead UNKNOWN
Set the port phys state as returned from ehca_query_port() to LINK_UP.
ehca actually represents a logical HCA, whose phys/link state always
is LINK_UP.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:34 -08:00
Hoang-Nam Nguyen
4fd3006032 IB/ehca: Allow en/disabling scaling code via module parameter
Allow users to en/disable scaling code when loading ib_ehca module,
rather than requiring the module to be rebuilt to change the setting.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:34 -08:00
Hoang-Nam Nguyen
8b16cef3df IB/ehca: Fix race condition/locking issues in scaling code
Fix a race condition in find_next_cpu_online() and some other locking
issues in ehca scaling code.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:34 -08:00
Hoang-Nam Nguyen
78d8d5f9ef IB/ehca: Rework irq handler
Rework ehca interrupt handling to avoid/reduce missed irq events.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:34 -08:00
Roland Dreier
551fd6122d IPoIB: Only allow root to change between datagram and connected mode
Change the permissions of the "mode" sysfs attribute to be S_IWUSR
instead of S_IWUGO.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:33 -08:00
Roland Dreier
11282b32a4 IB/mthca: Fix allocation of ICM chunks in coherent memory
The change to allow allocating ICM chunks from coherent memory did not
increment the count of sg entries properly, so a chunk that required
more than allocation would not be mapped properly by the HCA.

Fix this by adding the missing increment of chunk->nsg.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:33 -08:00
Dotan Barak
fc89afce34 IB/mthca: Allow the QP state transition RESET->RESET
RESET->RESET is an allowed QP state transition, so mthca should handle
it correctly, by just returning success without involving the firmware.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:32 -08:00
Fiodor Suietov
9de1cc9c44 [PATCH] libata: wrong sizeof for BUFFER
I have reproduced the AE_AML_BUFFER_LIMIT exception mentioned in
<http://bugzilla.kernel.org/show_bug.cgi?id=7689> basing on the SSDT ASL
code and libata ata_acpi_push_id() code.  There is an oversight in
ata_acpi_push_id() causing the exception.  The following update fixes it:

Signed-off-by: Fiodor Suietov <fiodor.f.suietov@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-16 13:32:41 -05:00
Kristen Carlson Accardi
08573a86c8 [PATCH] libata: change order of _SDD/_GTF execution (resend #3)
Make the sdd call come before gtf.  _SDD is used to provide
input to the _GTF file, so it should be executed first.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
(cherry picked from 89d74215e1e5b79ea084385b5c83d0e33cf2d655 commit)
2007-02-16 13:32:41 -05:00
Kristen Carlson Accardi
7ea1fbc2a2 [PATCH] libata: ACPI _SDD support
_SDD (Set Device Data) is an ACPI method that is used to tell the
firmware what the identify data is of the device that is attached to
the port.  It is an optional method, and it's ok for it to be missing.
Because of this, we always return success from the routine that calls
this method, even if the execution fails.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
(cherry picked from 39aa79e0a1f5f2e28aa341f035940746a98b45b1 commit)
2007-02-16 13:32:41 -05:00
Kristen Carlson Accardi
11ef697b37 [PATCH] libata: ACPI and _GTF support
_GTF is an acpi method that is used to reinitialize the drive.  It returns
a task file containing ata commands that are sent back to the drive to restore
it to boot up defaults.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
(cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2007-02-16 13:32:41 -05:00
Alexey Starikovskiy
c24e912b61 ACPI: ec: add unlock in error path
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16 12:51:53 -05:00
Alan Stern
7c9d6f16f5 [SCSI] SCSI core: better initialization for sdev->scsi_level
This patch will affect the CDB in INQUIRY commands sent to LUNs above 0 
when LUN-0 reports a scsi_level of 0; the LUN bits will no longer be set 
in the second byte of the CDB.  This is as it should be.  Nevertheless, 
it's possible that some wacky device might be adversely affected.  I doubt 
anyone will complain...

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 11:22:55 -06:00
Alan Stern
74feb53e8b [SCSI] scsi_proc.c: display sdev->scsi_level correctly
This patch (as833) fixes the "SCSI revision" output for
/proc/scsi/scsi.  If the scsi_level value is 0 (UNKNOWN), we want it
to show up as "0", not "ffffffff".

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 11:12:07 -06:00
Sumant Patro
cc5968c83e [SCSI] megaraid_sas: update version and author info
Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:44:12 -06:00
Sumant Patro
02b01e010a [SCSI] megaraid_sas: return sync cache call with success
FW does not support SYNCHRONIZE_CACHE cmd. FW flush cache on its own.
So, we just return success from the megasas_queue_command.

Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:43:41 -06:00
Sumant Patro
9f35fa8a14 [SCSI] megaraid_sas: replace pci_alloc_consitent with dma_alloc_coherent in ioctl path
Replaced pci_alloc_consistent with dma_alloc_coherent from the ioctl path.
This is to avoid situations where ioctl fails for lack of memory
(when system under heavy stress).

Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:20:33 -06:00
Sumant Patro
cf62a0a543 [SCSI] megaraid_sas: add bios_param in scsi_host_template
Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:19:53 -06:00
Linus Torvalds
f8abea8f8c Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] allow drm populated agp memory types cleanups
  [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate
  [AGPGART] Add agp-type-to-mask-type method missing from some drivers.
  [AGPGART] Don't try to remap i810 registers on resume.
  [AGPGART] Allow drm-populated agp memory types
  [AGPGART] compat ioctl
2007-02-16 08:17:04 -08:00
Linus Torvalds
ef29498655 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Longhaul - Redo Longhaul ver. 2
  [CPUFREQ] EPS - Correct 2nd brand test
  [CPUFREQ] Longhaul - Separate frequency and voltage transition
  [CPUFREQ] Longhaul - Models of Nehemiah
  [CPUFREQ] Whitespace fixup
  [CPUFREQ] Longhaul - Simplier minmult
  [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate
  [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback
  [CPUFREQ] ondemand governor restructure the work callback
  [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues
  [CPUFREQ] Remove hotplug cpu crap
  [CPUFREQ] Enhanced PowerSaver driver
  [CPUFREQ] Longhaul - Add VT8235 support
  [CPUFREQ] Longhaul - Fix guess_fsb function
  [CPUFREQ] Longhaul - Remove duplicate tables
  [CPUFREQ] Longhaul - Introduce Nehemiah C
  [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE
  [CPUFREQ] Longhaul - Remove "ignore_latency" option
2007-02-16 08:16:01 -08:00
Sumant Patro
af37acfb63 [SCSI] megaraid_sas: do not process cmds if hw_crit_error is set
Checks if hw_crit_error is set.
If it is set, we donot process commands.
Checks added in megasas_queue_command and command completion routines.

Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:15:29 -06:00
Ben Dooks
0187f221e9 [PATCH] s3c2410fb: fix un-initialised dev field
The current driver is not setting the dev field in the private data
structure, which can lead to an OOPS if the driver tries to report an
error.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:01 -08:00
john stultz
1489939f0a [PATCH] time: x86_64: convert x86_64 to use GENERIC_TIME
This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds
clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386).

[akpm@osdl.org: fix printk timestamps]
[akpm@osdl.org: fix printk ckeanups]
[akpm@osdl.org: hpet build fix]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Ingo Molnar
88ad0bf689 [PATCH] Add SysRq-Q to print timer_list debug info
Add SysRq-Q to print pending timers and other timer info.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
e9e2cdb412 [PATCH] clockevents: i386 drivers
Add clockevent drivers for i386: lapic (local) and PIT/HPET (global).  Update
the timer IRQ to call into the PIT/HPET driver's event handler and the
lapic-timer IRQ to call into the lapic clockevent driver.  The assignement of
timer functionality is delegated to the core framework code and replaces the
compile and runtime evalution in do_timer_interrupt_hook()

Use the clockevents broadcast support and implement the lapic_broadcast
function for ACPI.

No changes to existing functionality.

[ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ]
[ fixes based on review feedback from Arjan van de Ven <arjan@infradead.org> ]
Cleanups-from: Adrian Bunk <bunk@stusta.de>
Build-fixes-from: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
d66bea57e7 [PATCH] Allow early access to the power management timer
Allow early access to the power management timer by exposing the verified read
function and providing a helper function which checks the pmtmr_ioport
variable and returns either the pm timer readout or 0 in case the pm timer is
not available.

Create a new header file and replace also the ifdef'ed extern definition in
arch/i386/kernel/acpi/boot.c

This is a preperatory patch for the rework of the local apic timer
calibration.

No functional changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
169a0abbe3 [PATCH] ACPI keep track of timer broadcasting
This is a preperatory patch for highres/dyntick:

- replace the big #ifdef ARCH_APICTIMER_STOPS_ON_C3 hackery by functions

- remove the double switch in the power verify function (in the worst case
  we switched ipi to apic and 20usec later apic to ipi)

- keep track of the the state which stops local APIC timer

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <len.brown@intel.com>
Cc: <linux-acpi@vger.kernel.org>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
3434933b17 [PATCH] ACPI: fix missing include for UP
apic.h does not get included on UP compiles.  That way the
APICTIMER_STOPS_ON_C3 is not there and UP boxen have no support for timer
broadcasting.  This was never noticed, because the lapic timer is only used
for profiling on UP.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
c9cb2e3d7c [PATCH] hrtimers: namespace and enum cleanup
- hrtimers did not use the hrtimer_restart enum and relied on the implict
  int representation. Fix the prototypes and the functions using the enums.
- Use seperate name spaces for the enumerations
- Convert hrtimer_restart macro to inline function
- Add comments

No functional changes.

[akpm@osdl.org: fix input driver]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
73b08d2aa4 [PATCH] clocksource: replace is_continuous by a flag field
Using a flag filed allows to encode more than one information into a variable.
Preparatory patch for the generic clocksource verification.

[mingo@elte.hu: convert vmitime.c to the new clocksource flag]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
Adrian Bunk
c6025a79f5 [PATCH] correct CONFIG_GIGASET_M101 Makefile entry
Advanced Mathematics, lesson 1:
101 != 105

;-)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00