Commit graph

89,737 commits

Author SHA1 Message Date
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Jeff Garzik
2f614fe04f [netdrvr] b44: handle excessive multicast groups
If there are more than B44_MCAST_TABLE_SIZE groups in the dev->mc_list,
it will only listen to the first B44_MCAST_TABLE_SIZE that it sees.

This change makes the driver go into RXCONFIG_ALLMULTI mode if there
are more than B44_MCAST_TABLE_SIZE groups being subscribed to, similar
to other network drivers.

Noticed by Bill Helfinstine <bhelf@flitterfly.whirpon.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 07:10:38 -04:00
Karsten Keil
39984a9fad [PATCH] bonding: fix deadlock on high loads in bond_alb_monitor()
In bond_alb_monitor the bond->curr_slave_lock write lock is taken
and then dev_set_promiscuity maybe called which can take some time,
depending on the network HW. If a network IRQ for this card come in
the softirq handler maybe try to deliver more packets which end up in
a request to the read lock of bond->curr_slave_lock -> deadlock.
This issue was found by a test lab during network stress tests, this patch
disable the softirq handler for this case and solved the issue.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 07:01:25 -04:00
Alan Cox
46767aeba5 [PATCH] libata: Don't believe bogus claims in the older PIO mode register
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:55:00 -04:00
Peter Zijlstra
0a07bc645e [PATCH] forcedeth: hardirq lockdep warning
BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted)

Call Trace:
 show_trace
 dump_stack
 trace_hardirqs_on
 :forcedeth:nv_nic_irq_other
 handle_IRQ_event
 __do_IRQ
 do_IRQ
 ret_from_intr
DWARF2 barf
 default_idle
 cpu_idle
 rest_init
 start_kernel
 _sinittext

These 3 functions nv_nic_irq_tx(), nv_nic_irq_rx() and nv_nic_irq_other()
are reachable from IRQ context and process context. Make use of the
irq-save/restore spinlock variant.

(Compile tested only, since I do not have the hardware)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:48:25 -04:00
Maxime Bizon
70fbf32703 [PATCH] mv643xx_eth: Fix ethtool stats
Some stats reported by ethtool -S on mv643xx_eth device are cleared
between each call.  This patch fixes it.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:24 -04:00
Santiago Leon
751ae21c6c [PATCH] ibmveth: fix int rollover panic
This patch fixes a nasty bug that has been sitting there since the
very first versions of the driver, but is generating a panic because
we changed the number of 2K buffers for 2.6.16.

The consumer_index and producer_index are u32's that get incremented
on every buffer emptied and replenished respectively.  We use
the {producer,consumer}_index mod'ed with the size of the pool to
pick out an entry in the free_map.  The problem happens when the
u32 rolls over and the number of the buffers in the pool is not a
perfect divisor of 2^32.  i.e. if the number of 2K buffers is 0x300,
before the consumer_index rolls over,  our index to the free map =
0xffffffff mod 0x300 = 0xff.  The next time a buffer is emptied, we
want the index to the free map to be 0x100, but 0x0 mod 0x300 is 0x0.

This patch assigns the mod'ed result back to the consumer and producer
indexes so that they never roll over.  The second chunk of the patch
covers the unlikely case where the consumer_index has just been reset
to 0x0 and the hypervisor is not able to accept that buffer.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:24 -04:00
Santiago Leon
03a85d0907 [PATCH] ibmveth: rename proc entry name
This patch changes the name of the proc file for each ibmveth adapter
from the network device name to the slot number in the virtual bus.

The proc file is created when the device is probed, so a change
in the name of the device will not be reflected in the name of the
proc file giving problems when identifying and removing the adapter.
The slot number is a property that does not change through the life
of the adapter so we use that instead.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Santiago Leon
4347ef15f7 [PATCH] ibmveth: kdump interrupt fix
This patch fixes a race that panics the kernel when opening the
device after a kdump.  Without this patch there is a window where the
hypervisor can send an interrupt before all the structures for the
kdump ibmveth module are ready (because the hypervisor is not aware
that the partition crashed and that the virtual driver is reloading).
We close this window by disabling the interrupts before registering
the adapter to the hypervisor.

This patch depends on the "ibmveth: Harden driver initilisation" patch.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Santiago Leon
6b42237488 [PATCH] ibmveth: Add netpoll function
This patch adds the net poll controller function to ibmveth to support
netconsole and netdump.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Michael Ellerman
bbedefccc6 [PATCH] ibmveth: Harden driver initilisation
This patch has been floating around for a while now, Santi originally
sent it in March: http://www.spinics.net/lists/netdev/msg00471.html

After a kexec the ibmveth driver will fail when trying to register
with the Hypervisor because the previous kernel has not unregistered.

So if the registration fails, we unregister and then try again.

We don't unconditionally unregister, because we don't want to disturb
the regular code path for 99% of users.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Stephen Hemminger
489b10c1f6 [PATCH] sky2: incorrect length on receive packets
The previous change to do fragmented receive (post 2.6.18) introduced a bug
where packets are passed up with size set to the size of the receive buffer
not the actual received data.  IP silently trims this so it didn't show up
right away.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Mark Assad
77dc2db6d1 [PATCH] itmtouch: fix inverted flag to indicate touch location correctly, correct white space
There is a bug in the current version of the itmtouch USB touchscreen
driver.  The if statment that checks if pressure is being applied to the
touch screen is now missing a ! (not), so events are no longer being
reported correctly.

The original source code for this line was as follows:

	#define UCP(x) ((unsigned char*)(x))
	#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))

	...
	if (!UCOM(urb, 7, 0x20)) {

And was cleaned to:

	unsigned char *data = urb->transfer_buffer;
	....
	 if (data[7] & 0x20) {

(note the lack of '!')

This has been tested on an LG L1510BF and an LG1510SF touch screen.

Signed-off-by: Mark Assad <massad@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 19:44:36 -07:00
Linus Torvalds
4b8447184a Merge master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6:
  [PA-RISC] Fix time.c for new do_timer() calling convention
  [PA-RISC] Fix must_check warnings in drivers.c
  [PA-RISC] Fix parisc_newuname()
  [PA-RISC] Remove warning from pci.c
  [PA-RISC] Fix filldir warnings
  [PA-RISC] Fix sys32_sysctl
  [PA-RISC] Fix sba_iommu compilation
2006-10-04 19:08:13 -07:00
Linus Torvalds
97d41e90fe Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...
2006-10-04 18:57:35 -07:00
Matthew Wilcox
ee9f4b5d95 [PA-RISC] Fix sba_iommu compilation
klist_iter_exit() only takes one parameter.
Also fix warning by adding additional brackets.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-05 01:48:17 +00:00
Samuel Tardieu
ff02cfc76a [WATCHDOG] w83697hf/hg WDT driver - Kconfig patch
Update Kconfig for the w83697hf/hg watchdog driver.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:54:26 +02:00
Wim Van Sebroeck
e223f01a82 [WATCHDOG] w83697hf/hg WDT driver - autodetect patch
Change the autodetect code so that it is more generic.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:46:35 +02:00
Samuel Tardieu
3fdee8db01 [WATCHDOG] w83697hf/hg WDT driver - patch 16
This is patch 16 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add copyright notice for Samuel Tardieu also.

This is the last patch in this series. 

The original description for Samuel's driver was:
driver for the Winbond W83697HF/W83697HG watchdog timer

The Winbond SuperIO W83697HF/HG includes a watchdog that can count from
1 to 255 seconds (or minutes). This drivers allows the seconds mode to
be used. It exposes a standard /dev/watchdog interface. This chip is
currently being used on some motherboards designed by VIA.

By default, the module looks for a chip at I/O port 0x2e. The chip can
be configured to be at 0x4e on some motherboards, the address can be
chosen using the wdt_io module parameter. Using 0 will try to autodetect
the address.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:46:22 +02:00
Samuel Tardieu
b7b9868ba6 [WATCHDOG] w83697hf/hg WDT driver - patch 15
This is patch 15 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Clean-up initialization code - part 2: 
   * the line reading "set second mode & disable keyboard ..."
     is plain wrong, the register being manipulated (CRF4) is
     the counter itself, not the control byte (CRF3) -- looks
     like it has been copied from another driver.
   * I think garbage is being written in CRF3 (the control word)
     as the timeout value is being stored in this register (such
     as 60 for 60 seconds).
   * We only want to set pin 119 to WDTO# mode and leave the rest
     of CR29 like it is.
   * Set count mode to seconds and not minutes.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:46:11 +02:00
Samuel Tardieu
fa69afd3c2 [WATCHDOG] w83697hf/hg WDT driver - patch 14
This is patch 14 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Clean-up initialization code (part 1: remove
   w83697hf_select_wd_register() and
   w83697hf_unselect_wd_register() functions).
 - Make sure that the watchdog device is stopped
   as soon as we found it.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:46:00 +02:00
Samuel Tardieu
089d8139f4 [WATCHDOG] w83697hf/hg WDT driver - patch 13
This is patch 13 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Remove wdt_ctrl (it has been replaced with the
   w83697hf_write_timeout() function) and redo/clean-up
   the start/stop/ping code.
 - Make sure that the watchdog is enabled or disabled
   When starting or stoping the device (with a call
   to w83697hf_set_reg(0x30, ?); ).

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:45:42 +02:00
Samuel Tardieu
d46ab596e2 [WATCHDOG] w83697hf/hg WDT driver - patch 12
This is patch 12 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add w83697hf_write_timeout() to set the
   watchdog's timeout value.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:45:30 +02:00
Samuel Tardieu
a7933e05d4 [WATCHDOG] w83697hf/hg WDT driver - patch 11
This is patch 11 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add w83697hf_select_wdt() and w83697hf_deselect_wdt()
   so that the start/stop/ping code can directly talk to
   the watchdog.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:45:21 +02:00
Samuel Tardieu
c81b299625 [WATCHDOG] w83697hf/hg WDT driver - patch 10
This is patch 10 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - check whether the device is really present
   (we *can* probe for the device now).

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:45:11 +02:00
Samuel Tardieu
0cd544763b [WATCHDOG] w83697hf/hg WDT driver - patch 9
This is patch 9 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_get_reg() and w83697hf_set_reg()
   functions.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:44:59 +02:00
Samuel Tardieu
fe851ebade [WATCHDOG] w83697hf/hg WDT driver - patch 8
This is patch 8 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_lock function to leave the
   chipsets extended function mode.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:44:47 +02:00
Samuel Tardieu
f7be3328b6 [WATCHDOG] w83697hf/hg WDT driver - patch 7
This is patch 7 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_unlock function to enter the
   chipsets extended function mode.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:44:33 +02:00
Samuel Tardieu
de710d6871 [WATCHDOG] w83697hf/hg WDT driver - patch 6
This is patch 6 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - The driver works for both the w83697hf
   and the w83697hg chipset's.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:44:21 +02:00
Samuel Tardieu
44d7d3282b [WATCHDOG] w83697hf/hg WDT driver - patch 5
This is patch 5 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Rename the Extended Function Registers to the names
   used in the data-sheet.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:44:08 +02:00
Samuel Tardieu
eb64419e39 [WATCHDOG] w83697hf/hg WDT driver - patch 4
This is patch 4 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - limits the watchdog timeout to 1-63 while this
   device accepts 1-255.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:43:39 +02:00
Samuel Tardieu
db16525e63 [WATCHDOG] w83697hf/hg WDT driver - patch 3
This is patch 3 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Fix identation.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:43:23 +02:00
Samuel Tardieu
b41a9f59d1 [WATCHDOG] w83697hf/hg WDT driver - patch 2
This is patch 2 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - wdt_io is 2 bytes long. We should do a
   request_region for 2 bytes instead of 1.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:43:13 +02:00
Samuel Tardieu
8de6fc1e20 [WATCHDOG] w83697hf/hg WDT driver - patch 1
This is patch 1 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - the note concerning tyan motherboards has been copied from
   another driver, This doesn't apply here.
 - the comments concerning CRF6 are wrong as CRF3 is manipulated
   and CRF6 is never read nor written.
 - the comments concerning CRF5 are wrong as CRF4 is manipulated
   and CRF5 is never read nor written.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:43:03 +02:00
Wim Van Sebroeck
196f29c8e8 [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()
Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results

The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands.
ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-10-04 22:42:19 +02:00
Wim Van Sebroeck
c310e2b950 [WATCHDOG] Kconfig clean up
fixed some more trailing spaces.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:42:07 +02:00
Wim Van Sebroeck
ab9d441425 [WATCHDOG] w836?7hf_wdt spinlock fixes.
Add io spinlocks to prevent possible race
conditions between start and stop operations
that are issued from different child processes
where the master process opened /dev/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:41:48 +02:00
Wim Van Sebroeck
e0845bf4e1 [WATCHDOG] Kconfig clean-up
* fix typo's according to spellings checker
* Fix some leading and trailing spaces

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:41:37 +02:00
Marcus Junker
f9a8c8913a [WATCHDOG] w83697hf WDT driver
New watchdog driver for the Winbond W83697HF chipset.
 
Signed-off-by: Marcus Junker <junker@anduras.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:41:07 +02:00
Wim Van Sebroeck
aa1fd4d7c3 [WATCHDOG] Winbond SMsC37B787 watchdog fixes
* Added io spinlocking
* Deleted WATCHDOG_MINOR (it's in the miscdevice include
* Changed timer_enabled to use set_bit functions
* WDIOC_GETSUPPORT should return -EFAULT or 0
* timeout should be correct before we initialize the watchdog
* we should initialize the watchdog before we give access
  to userspace
* Third parameter of module_param is not the default or
  initial value

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:36:42 +02:00
Wim Van Sebroeck
8386c8cfb2 [WATCHDOG] Winbond SMsC37B787 - remove trailing whitespace
Remove trailing whitespace.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:36:30 +02:00
Sven Anders
485ae77dc7 [WATCHDOG] Winbond SMsC37B787 watchdog driver
New watchdog driver for the Winbond SMsC37B787 chipset.
 
Signed-off-by: Sven Anders <anders@anduras.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-04 22:36:02 +02:00
David Somayajulu
afaf5a2d34 [SCSI] Initial Commit of qla4xxx
open-iSCSI driver for Qlogic Corporation's iSCSI HBAs

Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: Doug Maxey <dwm@bubba.enoyolf.org>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:34:04 -05:00
Jeff Garzik
ed542bed12 [SCSI] raid class: handle component-add errors
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:27:26 -05:00
Jeff Garzik
83aabc1be5 [SCSI] SCSI megaraid_sas: handle thrown errors
- handle clear_user() error

- handle and properly unwind from sysfs errors thrown during mod init

- adjust order of calls in megasas_exit() to precisely match
  registration order in megasas_init()

Signed-off-by: Jeff Garzik <jeff@garzik.org>

Updated for extra attribute and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:26:25 -05:00
Jeff Garzik
bb0766204c [SCSI] SCSI aic94xx: handle sysfs errors
Handle and unwind from errors returned by driver model functions.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:17:47 -05:00
Jeff Garzik
13026a6b98 [SCSI] SCSI st: fix error handling in module init, sysfs
- Notice and handle sysfs errors in module init, tape init

- Properly unwind errors in module init

- Remove bogus st_sysfs_class==NULL test, it is guaranteed !NULL at that point

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:16:29 -05:00
Jeff Garzik
5e4009ba3d [SCSI] SCSI sd: fix module init/exit error handling
- Properly handle and unwind errors in init_sd().  Fixes leaks on error,
  if class_register() or scsi_register_driver() failed.

- Ensure that exit_sd() execution order is the perfect inverse of
  initialization order.

FIXME:  If some-but-not-all register_blkdev() calls fail, we wind up
calling unregister_blkdev() for block devices we did not register.
This was a pre-existing bug.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:14:16 -05:00
Jeff Garzik
37e0333c68 [SCSI] SCSI osst: add error handling to module init, sysfs
- check all sysfs-related return codes, and propagate them back to callers

- properly unwind errors in osst_probe(), init_osst().  This fixes a
  leak that occured if scsi driver registration failed, and fixes an
  oops if sysfs creation returned an error.

(unrelated)
- kzalloc() cleanup in new_tape_buf()

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:12:44 -05:00
Henne
de77aaff5f [SCSI] scsi: remove hosts.h
Remove the obsolete hosts.h file under drivers/scsi.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 13:10:52 -05:00