commit 2780860edd upstream.
This commit resolves an issue where modpost section verification fails due
to section mismatches between list_add and its callers.
At present, list_add (and its internal __list_add) are called from both
.text and .init code sections. Since inlining can vary per call site,
list_add can be 4 different states:
list_add in text with arguments to non-.init.data values
list_add in init with arguments to static .init.data values
list_add in init with arguments to non-.init.data values
list_add in text with arguments to static .init.data values
It is last instance that ends up causing the section mismatch caused by
constant propagation of the address of static libs inside the `dir_add` as
seen below (with the dir_list being defined statically in initramfs.c,
resting in .init.data).
WARNING: modpost: vmlinux.o: section mismatch in reference: __list_add
(section: .text.unlikely.) -> dir_list (section: .init.data)
Because of these section matching requirements, semantically, __list_add
and list_add MUST be inlined. This will then ensure callers inside .init
will receive a list_add that exists and refers to only .init data, and
list_add code in .text sections will only refer to non-init data.
This issue manifests predominently in AutoFDO with clang, which is very
hesitant to inline cold functions such as list_add even when marked
`inline`. Marking them as `__always_inline` therefore matches the
existing semantic constraints imposed by modpost's section mismatch
checks.
Link: https://lore.kernel.org/20260731-always-inline-list-add-v1-1-d29f54ce5477@google.com
Link: https://lore.kernel.org/all/CANn89iJVQe=wedLheJmjZjOTJsWHijT0jZs=iRxKssJZbjAxHw@mail.gmail.com/
Signed-off-by: Jordan R Abrahams-Whitehead <ajordanr@google.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Giuliano Procida <gprocida@google.com>
Reported-by: Yabin Cui <yabinc@google.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2173
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c39d0916da upstream.
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260807060733.3186624-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d07644524b ]
hidinput_query_battery_capacity() assumes the state-of-charge value is
the first byte following the report ID (buf[1]) and ignores where the
battery field actually sits within the report.
An Apple Magic Trackpad 2 precedes the AbsoluteStateOfCharge byte with a
byte of status flags in its battery reports, so this query returns the
flags byte instead of the charge level.
The device happens to make that easy to observe, because it exposes the
same cell twice: its report descriptor declares AbsoluteStateOfCharge in
two reports (0x90 and 0x9b), so hidinput_setup_battery() registers two
power supplies. Only the first one is refreshed by hid-magicmouse -- it
uses hid_get_battery(), which returns the first battery of the list --
and that refresh goes through the report event path, which parses the
field correctly. Nothing ever reports the second one, so every read of
its capacity takes the query path above. On a USB-C Magic Trackpad over
USB, on an unpatched 7.1.5:
hid-<serial>-battery-144 = 100% (Charging) <- report event path
hid-<serial>-battery-155 = 3% (Discharging) <- query path
Both are the same physical battery. A raw HIDIOCGINPUT of the two
reports at that same moment:
report 0x90 -> [90 03 64]
report 0x9b -> [9b 03 64 64 00 00 10 00 00 00 00 00 00 00]
^flags ^SoC = 0x64 = 100%
The device answers correctly in both cases; only the offset the kernel
reads the capacity from is wrong. 0x03 is the flags byte (present,
charging), reported as "3%".
Bluetooth takes the same query path for its capacity, where the trackpad
reported a bogus near-constant ~4% -- 0b100, the FullyCharged flag --
regardless of the real charge.
Store the battery field's offset within the report at setup time and use
it when querying, so the capacity is read from its real position. The
report event path already parses the field correctly through the HID
core; only the explicit GET_REPORT query was wrong.
Devices whose capacity field is the first field in the report have a
report_offset of 0 and are unaffected (buf[1 + 0] == buf[1]).
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
[ Adapted `bat->report_offset` and other `struct hid_battery` accessors to the flat `dev->battery_*` fields on `struct hid_device` and replaced `__free(kfree)` with manual `kfree(buf)` calls. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd0b0a4a2c ]
CDR/MORE/DNR fields are not belonging to SC in the NVMe spec, rename
them to NVME_STATUS_* to avoid confusion.
Signed-off-by: Weiwen Hu <huweiwen@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 4a3f00262a ("nvmet-tcp: bound SGL data length before allocating command buffers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2eed77fdcb ]
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
Link: https://lore.kernel.org/43552d09-2ce2-4b19-b0d3-a2d1ab952145@I-love.SAKURA.ne.jp
Reported-by: syzbot+3f51ad7ac3ae57a6fdcc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3f51ad7ac3ae57a6fdcc
Reported-by: syzbot+47cf95ca1f9dcca872c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47cf95ca1f9dcca872c8
Reported-by: syzbot+8a173e13208949931dc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a173e13208949931dc7
Reported-by: syzbot+90984d3713722683112e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=90984d3713722683112e
Analyzed-by: AI Mode in Google Search (no mail address)
Fixes: 5ff3b30ab5 ("kcov: collect coverage from interrupts")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adjusted the `kcov_init()` deletion context to plain `vmalloc()` since 5.15 lacks the `vmalloc_node()`/`cpu_to_node()` conversion. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b19c0f81e upstream.
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[Denis Arefev: adapted for 5.10/5.15: keep prandom_u32(),
get_random_u32_below() not used here]
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4fb6514ff upstream.
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 20ec3ebd70 ]
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 2abd5287f0 ("KVM: x86: Check for invalid/obsolete root *after* making MMU pages available")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kenta Akagi <k@mgml.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dedd34b0f2 ]
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zijie Huang <milkory@outlook.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/1e9ab39597423fd5d13cfaaf52279b8ee3d9fc3c.1785434373.git.milkory@outlook.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Dropped the `extack` argument from the `notify_and_destroy()` context line to match 5.15's 6-parameter version. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03390aa32e ]
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: b84bbaf7a6 ("packet: in packet_snd start writing at link layer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 21b5953e74 ("packet: use consistent hard_header_len in TX_RING send path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 008cb88edb upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef233 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb2784d9ab upstream.
While converting users of msecs_to_jiffies(), lkp reported that some range
checks would always be true because of the mismatch between the implied int
value of secs_to_jiffies() vs the unsigned long return value of the
msecs_to_jiffies() calls it was replacing.
Fix this by casting the secs_to_jiffies() input value to unsigned long.
Fixes: b35108a51c ("jiffies: Define secs_to_jiffies()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250130192701.99626-1-eahariha@linux.microsoft.com
Closes: https://lore.kernel.org/oe-kbuild-all/202501301334.NB6NszQR-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 058a8f7f73 ]
This patch adds three APIs to replace the iph->tot_len setting
and getting in all places where IPv4 BIG TCP packets may reach,
they will be used in the following patches.
Note that iph_totlen() will be used when iph is not in linear
data of the skb.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8a7ed56167 ("net/sched: act_ct: fix sk_buff leak when the header checks reject a packet")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b35108a51c ]
secs_to_jiffies() is defined in hci_event.c and cannot be reused by
other call sites. Hoist it into the core code to allow conversion of the
~1150 usages of msecs_to_jiffies() that either:
- use a multiplier value of 1000 or equivalently MSEC_PER_SEC, or
- have timeouts that are denominated in seconds (i.e. end in 000)
It's implemented as a macro to allow usage in static initializers.
This will also allow conversion of yet more sites that use (sec * HZ)
directly, and improve their readability.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Link: https://lore.kernel.org/all/20241030-open-coded-timeouts-v3-1-9ba123facf88@linux.microsoft.com
Stable-dep-of: c2816d613f ("ice: wait for reset completion in ice_resume()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0357ef03c9 ]
Commit 2a010c4128 ("fs: don't block i_writecount during exec") removed
the legacy behavior of getting ETXTBSY on attempt to open and executable
file for write while it is being executed.
This commit was reverted because an application that depends on this
legacy behavior was broken by the change.
We need to allow HSM writing into executable files while executed to
fill their content on-the-fly.
To that end, disable the ETXTBSY legacy behavior for files that are
watched by pre-content events.
This change is not expected to cause regressions with existing systems
which do not have any pre-content event listeners.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241128142532.465176-1-amir73il@gmail.com
Stable-dep-of: db1856ea91 ("binfmt_misc: restore write access when removing an entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a94204f4d4 ]
Legacy inotify/fanotify listeners can add watches for events on inode,
parent or mount and expect to get events (e.g. FS_MODIFY) on files that
were already open at the time of setting up the watches.
fanotify permission events are typically used by Anti-malware sofware,
that is watching the entire mount and it is not common to have more that
one Anti-malware engine installed on a system.
To reduce the overhead of the fsnotify_file_perm() hooks on every file
access, relax the semantics of the legacy FAN_ACCESS_PERM event to generate
events only if there were *any* permission event listeners on the
filesystem at the time that the file was opened.
The new semantic is implemented by extending the FMODE_NONOTIFY bit into
two FMODE_NONOTIFY_* bits, that are used to store a mode for which of the
events types to report.
This is going to apply to the new fanotify pre-content events in order
to reduce the cost of the new pre-content event vfs hooks.
[Thanks to Bert Karwatzki <spasswolf@web.de> for reporting a bug in this
code with CONFIG_FANOTIFY_ACCESS_PERMISSIONS disabled]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wj8L=mtcRTi=NECHMGfZQgXOp_uix1YVh04fEmrKaMnXA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/5ea5f8e283d1edb55aa79c35187bfe344056af14.1731684329.git.josef@toxicpanda.com
Stable-dep-of: db1856ea91 ("binfmt_misc: restore write access when removing an entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c5f0d2b5f ]
This will help print the fsid and client's global_id in debug logs,
and also print the function names.
[ idryomov: %lld -> %llu, leading space for doutc(), don't include
__func__ in pr_*() variants ]
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 50958bb928 ("ceph: fix hanging __ceph_get_caps() with stale mds_wanted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 74e2ef72bd ]
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ff ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22d ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 29ab31f3f2 ("wifi: brcmfmac: set F2 blocksize to 256 for BCM43752")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 06cb687a51 ]
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal.
Fixes: aef69d5475 ("media: v4l: fwnode: Add a convenience function for registering sensors")
Cc: stable@vger.kernel.org
Suggested-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/linux-media/20240315073125.275501-2-sakari.ailus@linux.intel.com/
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8a718752f5 ]
Set the owner field of the async sub-devices by making
v4l2_async_register_subdev() a macro and obtaining THIS_MODULE that way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 06cb687a51 ("media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90c0486a82 ]
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4f ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb97 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8d4c18bfb ]
Audit all the users of dma_resv_add_excl_fence() and make sure they
reserve a shared slot also when only trying to add an exclusive fence.
This is the next step towards handling the exclusive fence like a
shared one.
v2: fix missed case in amdgpu
v3: and two more radeon, rename function
v4: add one more case to TTM, fix i915 after rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com
Stable-dep-of: a48bbcc7ac ("drm/virtio: use uninterruptible resv lock for plane updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5a643e4623 ]
Move xbc_snprint_cmdline() from init/main.c to lib/bootconfig.c so the
function (and its xbc_namebuf scratch buffer) becomes part of the shared
parser library. tools/bootconfig already compiles lib/bootconfig.c
directly, which lets a follow-up patch reuse the same renderer in the
userspace tool to convert a bootconfig file into a flat cmdline string
at build time.
No functional change.
Link: https://lore.kernel.org/all/20260508-bootconfig_using_tools-v1-1-1132219aa773@debian.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: dec4d8118c ("bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b679d6c06b ]
Now that pinctrl_gpio_direction_output() is no longer used, let's drop
the '_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: d3e91a95b2 ("gpio: tegra: do not call pinctrl for GPIO direction")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 537dd2d9fb ]
Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap.
Reduces duplicate code, no actual functional changes.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8211a26324 ("net: ipip: require CAP_NET_ADMIN in the device netns for changelink")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c5d2d3c3f ]
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e01 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.
Fixes: 559c1e1e01 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2031845713 ]
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!
Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.
Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ffba0171c ("dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2aff9d20d5 ]
Move management of the sock->sk_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 56acfeb100 ("selinux: avoid sk_socket dereference in selinux_sctp_bind_connect()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c9c9b37f8c ]
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes: 34666d467c ("netfilter: bridge: move br_netfilter out of the core")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a74fc62eec ]
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c9c9b37f8c ("netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fe14253e ]
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c9c9b37f8c ("netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2dce8c52a9 ]
dst_dev_put() can overwrite dst->output while other
cpus might read this field (for instance from dst_output())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need RCU protection in the future.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c9c9b37f8c ("netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f1c5fd3489 ]
dst_dev_put() can overwrite dst->input while other
cpus might read this field (for instance from dst_input())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need full RCU protection later.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c9c9b37f8c ("netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b22677101 ]
Address checkpatch.pl warning below, across the audit subsystem:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Minor cleanup, no functional changes.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 81905b5acb ("audit: fix recursive locking deadlock in audit_dupe_exe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 125dfa2181 ]
inode->i_ino is being widened from unsigned long to u64. The audit
subsystem uses unsigned long ino in struct fields, function parameters,
and local variables that store inode numbers from arbitrary filesystems.
On 32-bit platforms this truncates inode numbers that exceed 32 bits,
which will cause incorrect audit log entries and broken watch/mark
comparisons.
Widen all audit ino fields, parameters, and locals to u64, and update
the inode format string from %lu to %llu to match.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-2-2257ad83d372@kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 81905b5acb ("audit: fix recursive locking deadlock in audit_dupe_exe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76a53de6f7 ]
audit_alloc_mark() and audit_get_nd() both need to perform a path
lookup getting the parent dentry (which must exist) and the final
target (following a LAST_NORM name) which sometimes doesn't need to
exist.
They don't need the parent to be locked, but use kern_path_locked() or
kern_path_locked_negative() anyway. This is somewhat misleading to the
casual reader.
This patch introduces a more targeted function, kern_path_parent(),
which returns not holding locks. On success the "path" will
be set to the parent, which must be found, and the return value is the
dentry of the target, which might be negative.
This will clear the way to rename kern_path_locked() which is
otherwise only used to prepare for removing something.
It also allows us to remove kern_path_locked_negative(), which is
transformed into the new kern_path_parent().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 81905b5acb ("audit: fix recursive locking deadlock in audit_dupe_exe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6f0643e4f ]
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e187bc02f8 ]
Ever since idmapped mounts were introduced, inode ownership checks (for
side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done
against the nop_mnt_idmap, which completely ignores the file's mount's
idmap. This results in odd edgecases like:
1) mount/bind-mount with an idmap userA:userB:1
2) userB runs an owner_or_capable() check on file that is owned by userA
on-disk/in-memory, but owned by userB after idmap translation
3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied
In the case of mincore/madvise MADV_PAGEOUT, this is usually benign,
because file_permission(file, MAY_WRITE) will probably succeed, as it uses
the proper idmap internally, but it does not need to be the case on e.g a
0444 file where even the owner itself doesn't have permissions to write to
it.
Since this is clearly not trivial to get right, introduce a
file_owner_or_capable() that can carry the correct semantics, and switch
the various users in mm to it.
The issue was found by manual code inspection & an off-list discussion
with Jan Kara.
Link: https://lore.kernel.org/20260625153853.913949-1-pfalcato@suse.de
Fixes: 9caccd4154 ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Amutable) <brauner@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdcc4e4618 upstream.
IPVS configuration paths update destination availability while connection
accounting updates destination overload state. The two independent states
share dest->flags, so their read-modify-write updates can race and lose one
another.
Keep OVERLOAD in flags, where the preceding patch serializes its updates
with dst_lock, and move AVAILABLE to cflags. This keeps configuration-
controlled availability out of the scheduler hot cacheline until a
scheduler needs to check it. It also prevents availability updates from
clobbering overload state.
The destination status bits are not exposed through the IPVS sockopt or
netlink interfaces, so keep their definitions in the internal IPVS header.
Readers can still observe stale destination state; this does not provide a
cross-field snapshot.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Link: https://lore.kernel.org/all/8913381c-1e02-35c7-0ec4-61de5a12fd35@ssi.bg/
Assisted-by: Claude-Code:GLM-5.2
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit cdcc4e4618)
[ Julian: Backport by removing the hunks from ip_vs_xmit.c ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 883b56ae58 upstream.
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed8 ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d6 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none.
Fixes: 720f22fed8 ("net: sched: refactor reinsert action")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260806101252.809593-1-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e243671bc upstream.
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a3 (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b533 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc5bde9ce3 upstream.
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop.
Fixes: af7d6cce53 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes")
Cc: stable@vger.kernel.org
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260807181710.1178747-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b66774b48d ]
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the channel
has been deleted from its connection. l2cap_chan_del() atomically sets
this flag using test_and_set_bit() instead of setting chan->conn to
NULL. All asynchronous workers (l2cap_chan_timeout, l2cap_ack_timeout,
l2cap_monitor_timeout, l2cap_retrans_timeout) and l2cap_chan_send()
check FLAG_DEL to determine whether the channel has been torn down,
rather than testing chan->conn for NULL.
Fixes: 8c8e620467 ("Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()")
Cc: <stable@vger.kernel.org>
Cc: Siwei Zhang <oss@fourdim.xyz>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Assisted-by: Gemini:gemini-3.1-pro-preview
Reported-by: https://sashiko.dev/#/patchset/20260521021249.3258069-1-oss%40fourdim.xyz
Change-Id: Ie9862976d25c3e6d386689cd198ebe5ab4cc5509
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Todd Kjos <tkjos@google.com>
commit 3b9a324e64 upstream.
dev_validate_header() reads dev->hard_header_len directly when
zero-padding short link layer headers for CAP_SYS_RAWIO holders:
if (capable(CAP_SYS_RAWIO)) {
memset(ll_header + len, 0, dev->hard_header_len - len);
return true;
}
Packet send paths call dev_validate_header() on skbs whose headroom was
allocated from an earlier hard_header_len read. If the device is
reconfigured so that dev->hard_header_len increases before validation,
the memset writes past the reserved buffer, an out-of-bounds write.
This out-of-bounds write is masked in some SOCK_RAW paths today because
the same concurrent increase can first make skb_push() exceed the
reserved headroom and trigger skb_under_panic(). Remove the zero-padding
branch before making those hard_header_len reads consistent, so the
snapshot fixes do not turn a loud panic into a silent overwrite.
This path is only reached for variable length L2 protocols, where
len < hard_header_len but len >= min_header_len. No remaining in-tree
variable length L2 protocol implements header_ops->validate, and the
CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no
real value beyond allowing testing of intentionally malformed input.
Drop the CAP_SYS_RAWIO branch. The remaining reads of
dev->hard_header_len in dev_validate_header() are comparisons only and
have no memory safety impact.
Suggested-by: Willem de Bruijn <willemb@google.com>
Fixes: 2793a23aac ("net: validate variable length ll headers")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-2-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f843441c4 upstream.
The upper/lower connection thresholds for dest can be changed,
so use ip_vs_dest_update_overload() to properly update the
dest overload flag.
The thresholds were not limited, fit them in the 0 .. INT_MAX
range as already done in ipvsadm.
As the thresholds are also read when connections are created
and expired, use WRITE_ONCE/READ_ONCE to access them.
As the lower threshold is optional, use (u - (u >> 2)) to
calculate the 75% default value based on the upper threshold
by preserving the integer rounding, as suggested by Yizhou Zhao.
Trigger flag update when totalconns reaches one of the
thresholds and use dst_lock to serialize the updating.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04d2feaed8 upstream.
Replace the inactconns dest counter with totalconns, now
inactconns can be obtained from totalconns - activeconns.
This reduces the atomic inc/dec ops for TCP/SCTP from
6 to 4 if the connection is established and then closed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 867621ba20 upstream.
BAM version 1.6.0 and later changed the behavior of the mask field in
command elements for read operations.
In older BAM versions, or prior implementation assumptions, the mask
field was effectively ignored for read commands. However, starting from
BAM v1.6.0, the mask field for read commands is repurposed to carry the
upper 4 bits of the destination address, enabling support for 36-bit
addressing. For write commands, the mask field continues to function as
a traditional write mask.
The current driver sets mask = 0xffffffff for all command elements.
While this works for write operations, it breaks read operations on
BAM v1.6.0+ hardware. In such cases, the hardware interprets the upper
address bits as 0xf, resulting in an invalid destination address
(0xf_xxxxxxxx instead of 0x0_xxxxxxxx).
This leads to failures such as NAND enumeration issues observed on
platforms like IPQ5424.
Fix this by assigning the mask field based on command type:
- For read commands: set mask = 0 (upper address bits = 0)
- For write commands: retain mask = 0xffffffff
Also update the bam_cmd_element structure documentation to reflect the
dual purpose of the mask field across BAM versions.
This ensures correct behavior on BAM v1.6.0+ while maintaining backward
compatibility with older hardware.
Fixes: dfebb055f7 ("dmaengine: qcom: bam_dma: wrapper functions for command descriptor")
Tested-by: Lakshmi Sowjanya D <lakshmi.d@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260615060908.1263171-1-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
