Add a register that contains the GMU core firmware version on non-
legacy (non-sdm845-family) SoCs.
The name is guesstimated based on what it does downstream, but it'll
do.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629932/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The CWB mux has its own registers and set of operations. Add dpu_hw_cwb
abstraction to allow driver to configure the CWB mux.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629254/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-12-fe220297a7f0@quicinc.com
[DB: added #include <linux/bitfield.h>]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The struct dpu_rm_requirements was used to wrap display topology and
hw resources, which meant INTF indices. As of commit ef58e0ad34
("drm/msm/dpu: get INTF blocks directly rather than through RM") the hw
resources struct was removed, leaving struct dpu_rm_requirements
containing a single field (topology). Remove the useless wrapper.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: dropped stray msm_drv.h inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629259/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-5-fe220297a7f0@quicinc.com
MSM display drivers provide kms structure allocated during probe().
Don't clean up priv->kms field in case of an error. Otherwise probe
functions might fail after KMS probe deferral.
Fixes: a2ab5d5bb6 ("drm/msm: allow passing struct msm_kms to msm_drv_probe()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 506efcba31 ("drm/msm: carve out KMS code from msm_drv.c")
Patchwork: https://patchwork.freedesktop.org/patch/590411/
Link: https://lore.kernel.org/r/20240420-mdp4-fixes-v1-1-96a70f64fa85@linaro.org
Because the of_dma_configure() will returns '-EPROBE_DEFER' if the probe
procedure of the specific platform IOMMU driver is not finished yet. It
can also return other error code for various reasons.
Stop pretending that it will always suceess, quit if it fail.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 29ac8979cd ("drm/msm/a6xx: use msm_gem for GMU memory objects")
Fixes: 5a903a44a9 ("drm/msm/a6xx: Introduce GMU wrapper support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622782/
Link: https://lore.kernel.org/r/20241104090738.529848-1-sui.jingfeng@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Passing a variable string as a printf style format is potentially
dangerous that -Wformat-security can warn about if enabled. A new
instance just got added:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function 'dpu_kms_mdp_snapshot':
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1046:49: error: format not a string literal and no format arguments [-Werror=format-security]
1046 | vbif->name);
| ~~~~^~~~~~
Fix this one and the preexisting -Wformat-security warnings the in the
DRM code for snapdragon.
Fixes: 1a40bb31fc ("drm/msm/dpu: Add VBIF to DPU snapshot") # and others
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629126/
Link: https://lore.kernel.org/r/20241216083319.1838449-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
All other submodules pass arguments directly. Drop struct
msm_dp_panel_in that is used to wrap dp_panel's submodule args and pass
all data to msm_dp_panel_get() directly.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629055/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-4-f8d1961cf22f@linaro.org
Use msm_dp_utils_pack_sdp_header() and call msm_dp_write_link() directly
to program audio packet data. Use 0 as Packet ID, as it was not
programmed earlier.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629051/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-2-f8d1961cf22f@linaro.org
The msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs() are not
called anywhere. If there is a necessity to dump registers, the
snapshotting should be used instead. Drop these two functions.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629049/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-1-f8d1961cf22f@linaro.org
Virtual wide planes give high amount of flexibility, but it is not
always enough:
In parallel multirect case only the half of the usual width is supported
for tiled formats. Thus the whole width of two tiled multirect
rectangles can not be greater than max_linewidth, which is not enough
for some platforms/compositors.
Another example is as simple as wide YUV plane. YUV planes can not use
multirect, so currently they are limited to max_linewidth too.
Now that the planes are fully virtualized, add support for allocating
two SSPP blocks to drive a single DRM plane. This fixes both mentioned
cases and allows all planes to go up to 2*max_linewidth (at the cost of
making some of the planes unavailable to the user).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629026/
Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-2-65221f213ce1@linaro.org
Only several SSPP blocks support such features as YUV output or scaling,
thus different DRM planes have different features. Properly utilizing
all planes requires the attention of the compositor, who should
prefer simpler planes to YUV-supporting ones. Otherwise it is very easy
to end up in a situation when all featureful planes are already
allocated for simple windows, leaving no spare plane for YUV playback.
To solve this problem make all planes virtual. Each plane is registered
as if it supports all possible features, but then at the runtime during
the atomic_check phase the driver selects backing SSPP block for each
plane.
As the planes are attached to the CRTC and not the encoder, the SSPP
blocks are also allocated per CRTC ID (all other resources are currently
allocated per encoder ID). This also matches the hardware requirement,
where both rectangles of a single SSPP can only be used with the LM
pair.
Note, this does not provide support for using two different SSPP blocks
for a single plane or using two rectangles of an SSPP to drive two
planes. Each plane still gets its own SSPP and can utilize either a solo
rectangle or both multirect rectangles depending on the resolution.
Note #2: By default support for virtual planes is turned off and the
driver still uses old code path with preallocated SSPP block for each
plane. To enable virtual planes, pass 'msm.dpu_use_virtual_planes=1'
kernel parameter.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629022/
Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-1-65221f213ce1@linaro.org
On chipsets such as QCS615, there is no 3dmux present. In such
a case, a layer exceeding the max_mixer_width cannot be split,
hence cannot be supported.
Filter out the modes which exceed the max_mixer_width when there
is no 3dmux present. Also, add a check in the dpu_crtc_atomic_check()
to return failure for such modes.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Xiangxu Yin <quic_xiangxuy@quicinc.com> # QCS615
Patchwork: https://patchwork.freedesktop.org/patch/627974/
Link: https://lore.kernel.org/r/20241209-no_3dmux-v3-1-48aaa555b0d3@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Similar to the r_pipe sspp protect, add a check to protect
the pipe state prints to avoid NULL ptr dereference for cases when
the state is dumped without a corresponding atomic_check() where the
pipe->sspp is assigned.
Fixes: 31f7148fd3 ("drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/67
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Patchwork: https://patchwork.freedesktop.org/patch/628404/
Link: https://lore.kernel.org/r/20241211-check-state-before-dump-v2-1-62647a501e8c@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
During suspend/resume process all connectors are explicitly disabled and
then reenabled. However resume fails because of the connector_status check:
[dpu error]connector not connected 3
[drm:drm_mode_config_helper_resume [drm_kms_helper]] *ERROR* Failed to resume (-22)
It doesn't make sense to check for the Writeback connected status (and
other drivers don't perform such check), so drop the check.
It wasn't a problem before the commit 71174f362d ("drm/msm/dpu: move
writeback's atomic_check to dpu_writeback.c"), since encoder's
atomic_check() is called under a different conditions that the
connector's atomic_check() (e.g. it is not called if there is no
connected CRTC or if the corresponding connector is not a part of the
new state).
Fixes: 71174f362d ("drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c")
Cc: stable@vger.kernel.org
Reported-by: Leonard Lausen <leonard@lausen.nl>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/57
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Tested-by: György Kurucz <me@kuruczgy.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/627828/
Link: https://lore.kernel.org/r/20241209-dpu-fix-wb-v4-1-7fe93059f9e0@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
dp_ctrl_off_link() was created to handle a case where we received
a cable connect and then get a cable disconnect without the corresponding
dp_display_enable(). For such cases the pixel clock will be off but the
link clock will still be on. dp_ctrl_off_link() handles this case by
turning off the link clock only.
However, the vote removal to the opp table for this case was missed.
Remove the opp table vote in dp_ctrl_off_link().
Fixes: 375a126090 ("drm/msm/dp: tear down main link at unplug handle immediately")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/627487/
Link: https://lore.kernel.org/r/20241205-dp_mst-v1-2-f8618d42a99a@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
MMSS_DP_INTF_CONFIG has already been setup by the main datapath
for DP to account for widebus to be used/unused etc.
In current implementation, TPG only switches the DP controller
to use the main datapath stream OR use the test pattern but expects
the rest of the controller to be already setup.
Keeping the same behavior intact, drop the clearing of MMSS_DP_INTF_CONFIG
from the msm_dp_catalog_panel_tpg_enable() API.
Fixes: 757a2f36ab ("drm/msm/dp: enable widebus feature for display port")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/626888/
Link: https://lore.kernel.org/r/20241202-tpg-v1-2-0fd6b518b914@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
Cc: stable@vger.kernel.org
Fixes: e3b1f369db ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624681/
Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
In pll_get_integloop_gain(), digclk_divsel=1 or 2, base=63 or 196ULL,
so the base may be 63, 126, 196, 392. The condition base <= 2046
always true.
Fixes: caedbf17c4 ("drm/msm: add msm8998 hdmi phy/pll support")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624153/
Link: https://lore.kernel.org/r/20241112074101.2206-1-rex.nie@jaguarmicro.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer
for the header output, while it expects a two-element array. It performs
a sizeof check which is always true on 64-bit platforms (since
sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns
an error code which nobody actually checks.
Fix the function interface to accept u32[2] and return void, skipping
all the checks.
Fixes: 55fb8ffc18 ("drm/msm/dp: add VSC SDP support for YUV420 over DP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626806/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
i915:
- hdcp: Fix when the first read and write are retried
xe:
- Wake up waiters after wait condition set to true
- Mark the preempt fence workqueue as reclaim
- Update xe2 graphics name string
- Fix a couple of guc submit races
- Fix pat index usage in migrate
- Ensure non-cached migrate pagetable bo mappings
- Take a PM ref in the delayed snapshot capture worker
amdgpu:
- SMU 13.0.6 fixes
- XGMI fixes
- SMU 13.0.7 fixes
- Misc code cleanups
- Plane refcount fixes
- DCN 4.0.1 fixes
- DC power fixes
- DTO fixes
- NBIO 7.11 fixes
- SMU 14.0.x fixes
- Reset fixes
- Enable DC on LoongArch
- Sysfs hotplug warning fix
- Misc small fixes
- VCN 4.0.3 fix
- Slab usage fix
- Jpeg delayed work fix
amdkfd:
- wptr handling fixes
radeon:
- Use ttm_bo_move_null()
- Constify struct pci_device_id
- Fix spurious hotplug
- HPD fix
rockchip
- fix 32-bit build
-----BEGIN PGP SIGNATURE-----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=opXf
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Merge window fixes, mostly amdgpu and xe, with a few other minor ones,
all looks fairly normal,
i915:
- hdcp: Fix when the first read and write are retried
xe:
- Wake up waiters after wait condition set to true
- Mark the preempt fence workqueue as reclaim
- Update xe2 graphics name string
- Fix a couple of guc submit races
- Fix pat index usage in migrate
- Ensure non-cached migrate pagetable bo mappings
- Take a PM ref in the delayed snapshot capture worker
amdgpu:
- SMU 13.0.6 fixes
- XGMI fixes
- SMU 13.0.7 fixes
- Misc code cleanups
- Plane refcount fixes
- DCN 4.0.1 fixes
- DC power fixes
- DTO fixes
- NBIO 7.11 fixes
- SMU 14.0.x fixes
- Reset fixes
- Enable DC on LoongArch
- Sysfs hotplug warning fix
- Misc small fixes
- VCN 4.0.3 fix
- Slab usage fix
- Jpeg delayed work fix
amdkfd:
- wptr handling fixes
radeon:
- Use ttm_bo_move_null()
- Constify struct pci_device_id
- Fix spurious hotplug
- HPD fix
rockchip
- fix 32-bit build"
* tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernel: (48 commits)
drm/xe: Take PM ref in delayed snapshot capture worker
drm/xe/migrate: use XE_BO_FLAG_PAGETABLE
drm/xe/migrate: fix pat index usage
drm/xe/guc_submit: fix race around suspend_pending
drm/xe/guc_submit: fix race around pending_disable
drm/xe: Update xe2_graphics name string
drm/rockchip: avoid 64-bit division
Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable"
drm/amdgpu/jpeg: cancel the jpeg worker
drm/amdgpu: fix usage slab after free
drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3
drm/amdgpu: Fix sysfs warning when hotplugging
drm/amdgpu: Add sysfs interface for vcn reset mask
drm/amdgpu/gmc7: fix wait_for_idle callers
drm/amd/pm: Remove arcturus min power limit
drm/amd/pm: skip setting the power source on smu v14.0.2/3
drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3
drm/amdkfd: Use the correct wptr size
drm/xe: Mark preempt fence workqueue as reclaim
drm/xe/ufence: Wake up waiters after setting ufence->signalled
...
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
- Update xe2 graphics name string (Matt Roper)
- Fix a couple of guc submit races (Matt Auld)
- Fix pat index usage in migrate (Matt Auld)
- Ensure non-cached migrate pagetable bo mappings (Matt Auld)
- Take a PM ref in the delayed snapshot capture worker (Matt Brost)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZ0iOGQAKCRC4FpNVCsYG
vzSmAP9w9xMhtf4SmQFrCXctd7iGm6cGuBg9ZMbJ/CY5dt/awgEAk+wVFr2SvbXl
wg1bGl8x4wPov3f6ro7tq2VO4Uaysg8=
=1ZRO
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2024-11-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Update xe2 graphics name string (Matt Roper)
- Fix a couple of guc submit races (Matt Auld)
- Fix pat index usage in migrate (Matt Auld)
- Ensure non-cached migrate pagetable bo mappings (Matt Auld)
- Take a PM ref in the delayed snapshot capture worker (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z0iOjKwEGVo_DmgY@fedora