Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Update the hibernate and wake command sequences to meet the latest
datasheet specification and enable hibernation for I2C and SPI control
interfaces.
Richard Fitzgerald (1):
ASoC: cs35l56: Enable low-power hibernation mode on SPI
Simon Trimmer (3):
ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate
ASoC: cs35l56: Wake transactions need to be issued twice
ASoC: cs35l56: Enable low-power hibernation mode on i2c
include/sound/cs35l56.h | 1 +
sound/soc/codecs/cs35l56-i2c.c | 1 +
sound/soc/codecs/cs35l56-shared.c | 66 +++++++++++++++++++------------
sound/soc/codecs/cs35l56-spi.c | 1 +
4 files changed, 43 insertions(+), 26 deletions(-)
--
2.30.2
Iain reports that USB devices can't be used to wake a Lenovo Z13 from
suspend. This occurs because on some AMD platforms, even though the Root
Ports advertise PME_Support for D3hot and D3cold, wakeup events from
devices on a USB4 controller don't result in wakeup interrupts from the
Root Port when amd-pmc has put the platform in a hardware sleep state.
If amd-pmc will be involved in the suspend, remove D3hot and D3cold from
the PME_Support mask of Root Ports above USB4 controllers so we avoid those
states if we need wakeups.
Restore D3 support at resume so that it can be used by runtime suspend.
This affects both AMD Rembrandt and Phoenix SoCs.
"pm_suspend_target_state == PM_SUSPEND_ON" means we're doing runtime
suspend, and amd-pmc will not be involved. In that case PMEs work as
advertised in D3hot/D3cold, so we don't need to do anything.
Note that amd-pmc is technically optional, and there's no need for this
quirk if it's not present, but we assume it's always present because power
consumption is so high without it.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/20231004144959.158840-1-mario.limonciello@amd.com
Reported-by: Iain Lane <iain@orangesquash.org.uk>
Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: commit log, move to arch/x86/pci/fixup.c, add #includes]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel: power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel: release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel: devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel: hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel: hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel: usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel: usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel: hub_event+0xe80/0x1c10
There have been quite a few bug reports (see Link tags) about this crash.
Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Drop EXPORT_SYMBOLS for the functions that are not used by any modules.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No one is using this function. Hence remove it. Also move PCI device
feature detection flags to amd_iommu_types.h as its only used inside
AMD IOMMU driver.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove PPR handler and notifier related functions as its not used
anymore. Note that we are retaining PPR interrupt handler support
as it will be re-used when we introduce IOPF support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD GPU driver which was the only in-kernel user of iommu_v2 module
removed dependency on iommu_v2 module.
Also we are working on adding SVA support in AMD IOMMU driver. Device
drivers are expected to use common SVA framework to enable device
PASID/PRI features.
Removing iommu_v2 module and then adding SVA simplifies the development.
Hence remove iommu_v2 module.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix missed resource deallocation in rollback flows.
Currently if an error occurs after a successful
mlxplat_i2c_main_init(), mlxplat_i2c_main_exit() call is missed in
rollback flow.
Thus, some resources are not de-allocated.
Move mlxplat_pre_exit() call from mlxplat_remove() into
mlxplat_i2c_main_exit().
Call mlxplat_i2c_main_exit() instead of calling mlxplat_pre_exit() in
mlxplat_probe() error handling flow.
Unregister 'priv->pdev_i2c' device in mlxplat_i2c_main_init() cleanup
flow if this device was successfully registered.
Fixes: 158cd83207 ("platform: mellanox: Split logic in init and exit flow")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/lkml/70165032-796e-6f5c-6748-f514e3b9d08c@linux.intel.com/T/
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231005075616.42777-2-vadimp@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The clint of Sophgo's sg2042 is based off IP designed by T-HEAD, and
implements the not yet frozen ACLINT spec. This spec seems to be
abandoned, and will not be frozen in the predictable future.
Frozen specs required by the RISC-V maintainers before merging content
relating to those extensions, therefore a generic compatible is not
appropriate.
Instead, add new vendor specific compatible strings to identify mswi of
sg2042 clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[conor: re-wrote commit message to drop irrelevant sifive,clint discussion]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/2023100534-catty-moodiness-099e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/2023100534-showoff-alright-6c95@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/2023100533-broadband-hunk-9e91@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Link: https://lore.kernel.org/r/2023100512-sweat-abruptly-2445@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Link: https://lore.kernel.org/r/2023100523-throwback-oak-a164@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/2023100552-entrench-dingbat-093a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clint of Sophgo's sg2042 is based off IP designed by T-HEAD, but
Sophgo changes this IP layout to fit its cpu design and is incompatible
with the standard sifive clint. The timer and ipi device are on the
different address, and can not be handled by the sifive,clint dt-bindings.
If we use the same compatible string for mswi and timer of the sg2042
clint like sifive,clint, the DT may be like this:
mswi: interrupt-controller@94000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 3>;
reg = <0x94000000 0x00010000>;
};
timer: timer@ac000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 7>;
reg = <0xac000000 0x00010000>;
};
Since the address of mswi and timer are different, it is hard to merge
them directly. So we need two DT nodes to handle both devices.
If we use this DT for SBI, it will parse the mswi device in the timer
initialization as the compatible string is the same, so will mswi.
As they are different devices, this incorrect initialization will cause
the system unusable.
There is a more robust ACLINT spec. can handle this situation, but
the spec. seems to be abandoned and will not be frozen in the predictable
future.
So it is not the time to add ACLINT spec in the kernel bindings. Instead,
using vendor bindings is more acceptable.
Add new vendor specific compatible strings to identify timer of sg2042
clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The C920 is RISC-V CPU cores from T-HEAD Semiconductor.
Notably, the C920 core is used in the SOPHGO's SG2042 SoC.
Acked-by: Chao Wei <chao.wei@sophgo.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The first SoC in the SOPHGO series is SG2042, which contains 64 RISC-V
cores.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Chao Wei <chao.wei@sophgo.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning:
WARNING: modpost: drivers/platform/x86/hp/hp-wmi: section mismatch in reference: hp_wmi_driver+0x8 (section: .data) -> hp_wmi_bios_remove (section: .exit.text)
Fixes: c165b80cfe ("hp-wmi: fix handling of platform device")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231004111624.2667753-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AudioDSP firmware is the one who kicks SDxFIFOS calculation when a
stream is decoupled mode. During firmware bring up procedure, there is
no firmware running and the code-loading stream is always a decoupled
one. So, there is none to trigger the calculation and we end up with
false-positive timeout (-110) messages.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231006102857.749143-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SDxFIFOS register indicates the fifo size directly. There is no need to
modify the value after reading the register.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While AudioDSP drivers assign streams exclusively of HOST or LINK type,
nothing blocks a user to attempt to assign a COUPLED stream. As
supplied substream instance may be a stub, what is the case when
code-loading, such scenario ends with null-ptr-deref.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some additional fixes for v6.6, some fairly unremarkable driver specific
ones and a couple of minor core fixes for error handling and improved
logging.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUf5jYACgkQJNaLcl1U
h9CbGQf+PWNHd2un+l0yW2zpOMYRJhY1Q0796gn52hxAgsLQCa3HFO0eYOb0ev1y
zU+fChXc6uXHPMVg6w21g9zH8Ei6OWq7+70NPpagGJAbzvQ6dvqxpw/YvS8Sn8Bl
OTygHXIX2xAlGRlID13/h17+G6rLpQC1OUNYUxFwI59Hod2HAjzYSjnJ69j1ZiDJ
9VvzIE64TYyqkCVhv3h3LKno5ulFaSo1/FYVTN0g7t41xLR4VNsMWdPRz2/HpNZA
Wl/+NBskspN3wcNhGVq6Ty2yIy4ECDJE5cPaz7PCp13R4GfT1YAApG5nv5jpAJXs
q3xITIItdwL7VYKuVTCrlIjFT/MgjQ==
=WMMK
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.6-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More fixes for v6.6
Some additional fixes for v6.6, some fairly unremarkable driver specific
ones and a couple of minor core fixes for error handling and improved
logging.
Intersil 29018 light and proximity sensor is built into Exynos based
Peach-Pit/Pi Chromebooks, so enable driver for it to increase testing
coverage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006110631.3204334-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung S5C73M3 8Mp camera ISP and S5K6A3 RAW sensors are available on
Exynos4412-based Midas family boards, so enable the driver for them to
increase testing coverage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006112106.3205618-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the needed device-tree compatible string to the MAX77843 extcon
driver, so it can be automatically loaded when compiled as a kernel
module and given device-tree contains separate 'muic' node under the main
MAX77843 PMIC node.
Link: https://lore.kernel.org/all/20231006100434.2908243-2-m.szyprowski@samsung.com/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Commit 57f706bf73 ("ARM: dts: samsung: exynos4412-midas: add USB
connector and USB OTG") added a 'muic' node to the MAX77693 PMIC
definition in various device-tree files. Since that commit, the newly
created MFD cell gained its own of_node and compatible string. This
changed its modalias, what in turn broke automated loading of the driver
module, because the new modalias is based on the of_node compatible
string, not the platform device name.
Fix this by adding the needed device-tree compatible string.
Link: https://lore.kernel.org/all/20231006100434.2908243-1-m.szyprowski@samsung.com/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add compatibles for the Libretech cottonwood board family
Co-developed-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231006103500.2015183-2-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In commit 2b2d0a7a96 ("arm64: smp: Remove dedicated wakeup IPI") we
started using a scheduler IPI to avoid a dedicated reschedule. When we
did this, we used arch_smp_send_reschedule() directly rather than
calling smp_send_reschedule(). The only difference is that calling
arch_smp_send_reschedule() directly avoids tracing. Presumably we
_don't_ want to avoid tracing here, so switch to
smp_send_reschedule().
Fixes: 2b2d0a7a96 ("arm64: smp: Remove dedicated wakeup IPI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some MediaTek devices have broken firmware which corrupts some GICR
registers behind the back of the OS, and pseudo-NMIs cannot be used on
these devices. For more details see commit:
44bd78dd2b ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
We did not take this problem into account in commit:
331a1b3a83 ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Since that commit arm64's SMP code will try to setup some IPIs as
pseudo-NMIs, even on systems with broken FW. The GICv3 code will
(rightly) reject attempts to request interrupts as pseudo-NMIs,
resulting in boot-time failures.
Avoid the problem by taking the broken FW into account when deciding to
request IPIs as pseudo-NMIs. The GICv3 driver maintains a static_key
named "supports_pseudo_nmis" which is false on systems with broken FW,
and we can consult this within ipi_should_be_nmi().
Fixes: 331a1b3a83 ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Closes: https://issuetracker.google.com/issues/197061987#comment68
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With W=1:
drivers/spi/spi-mpc52xx-psc.c:178:5: warning: no previous prototype for ‘mpc52xx_psc_spi_transfer_one_message’ [-Wmissing-prototypes]
178 | int mpc52xx_psc_spi_transfer_one_message(struct spi_controller *ctlr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mpc52xx_psc_spi_transfer_one_message() is only used inside the file that
defines it. Hence fix this by making it static.
Fixes: 145cfc3840 ("spi: mpc52xx-psc: Switch to using core message queue")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310061815.7Rtyi4hs-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006112945.1491265-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Hibernation can be enabled on SPI-connected devices now that
the hibernate and wake sequences have been updated to work
with wake-on-MOSI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This can now be re-enabled as the sequence to reliably wake the device
has been implemented in the shared code.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the hardware uses SPI_MOSI, I2C_SCL or I2C_SDA as the wake source
the bus activity of sending HIBERNATE_NOW will wake up the amps that
were already put into hibernate.
ALLOW_AUTO_HIBERNATE tells the firmware to hibernate itself after a
timeout of a few seconds, giving the driver instances time to send this
before any amps have gone into hibernate.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pipeline priority is set in topology and driver should sort pipeline
based on priority for trigger order.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231006084454.19170-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver set pipeline priority according to priority setting in topology.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231006084454.19170-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IMX93 A0 chip involve the internal q-channel handshake in LPCG and
CCM to automatically handle the Flex-CAN IPG STOP signal. Only after
FLEX-CAN enter stop mode then can support the self-wakeup feature.
But meet issue when do the continue system PM stress test. When config
the CAN as wakeup source, the first time after system suspend, any data
on CAN bus can wakeup the system, this is as expect. But the second time
when system suspend, data on CAN bus can't wakeup the system. If continue
this test, we find in odd time system enter suspend, CAN can wakeup the
system, but in even number system enter suspend, CAN can't wakeup the
system. IC find a bug in the auto stop mode logic, and can't fix it easily.
So for the new imx93 A1, IC drop the auto stop mode and involve the
GPR to support stop mode (used before). IC define a bit in GPR which can
trigger the IPG STOP signal to Flex-CAN, let it go into stop mode.
And NXP claim to drop IMX93 A0, and only support IMX93 A1. So this patch
remove the auto stop mode, and add flag FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR
to imx93.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20230726112458.3524165-2-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Upstream commit 717c6ec241 ("can: sja1000: Prevent overrun stalls with
a soft reset on Renesas SoCs") fixes an issue with Renesas own SJA1000
CAN controller reception: the Rx buffer is only 5 messages long, so when
the bus loaded (eg. a message every 50us), overrun may easily
happen. Upon an overrun situation, due to a possible internal crosstalk
situation, the controller enters a frozen state which only can be
unlocked with a soft reset (experimentally). The solution was to offload
a call to sja1000_start() in a threaded handler. This needs to happen in
process context as this operation requires to sleep. sja1000_start()
basically enters "reset mode", performs a proper software reset and
returns back into "normal mode".
Since this fix was introduced, we no longer observe any stalls in
reception. However it was sporadically observed that the transmit path
would now freeze. Further investigation blamed the fix mentioned above,
and especially the reset operation. Reproducing the reset in a loop
helped identifying what could possibly go wrong. The sja1000 is a single
Tx queue device, which leverages the netdev helpers to process one Tx
message at a time. The logic is: the queue is stopped, the message sent
to the transceiver, once properly transmitted the controller sets a
status bit which triggers an interrupt, in the interrupt handler the
transmission status is checked and the queue woken up. Unfortunately, if
an overrun happens, we might perform the soft reset precisely between
the transmission of the buffer to the transceiver and the advent of the
transmission status bit. We would then stop the transmission operation
without re-enabling the queue, leading to all further transmissions to
be ignored.
The reset interrupt can only happen while the device is "open", and
after a reset we anyway want to resume normal operations, no matter if a
packet to transmit got dropped in the process, so we shall wake up the
queue. Restarting the device and waking-up the queue is exactly what
sja1000_set_mode(CAN_MODE_START) does. In order to be consistent about
the queue state, we must acquire a lock both in the reset handler and in
the transmit path to ensure serialization of both operations. It turns
out, a lock is already held when entering the transmit path, so we can
just acquire/release it as well with the regular net helpers inside the
threaded interrupt handler and this way we should be safe. As the
reset handler might still be called after the transmission of a frame to
the transceiver but before it actually gets transmitted, we must ensure
we don't leak the skb, so we free it (the behavior is consistent, no
matter if there was an skb on the stack or not).
Fixes: 717c6ec241 ("can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/20231002160206.190953-1-miquel.raynal@bootlin.com
[mkl: fixed call to can_free_echo_skb()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
imx93 A0 chip use the internal q-channel handshake signal in LPCG
and CCM to automatically handle the Flex-CAN stop mode. But this
method meet issue when do the system PM stress test. IC can't fix
it easily. So in the new imx93 A1 chip, IC drop this method, and
involve back the old way,use the GPR method to trigger the Flex-CAN
stop mode signal. Now NXP claim to drop imx93 A0, and only support
imx93 A1. So here add the stop mode through GPR.
This patch also fix a typo for aonmix_ns_gpr.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20230726112458.3524165-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>