Rename dump_nhm_platform_info() and dump_nhm_cst_cfg() to
dump_platform_info() and dump_cst_cfg() because these MSRs' behavior is
consistent when they're available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Platforms with has_msr_misc_pwr_mgmt set is a subset of platforms with
has_nhm_msrs set.
Thus remove the redudant check for platform->has_nhm_msrs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT,
MSR_PKG_CST_CONFIG_CONTROL, and the TRL MSRs are always available for
platforms since Nehalem. Support for these msrs can be described
altogether.
Abstract the support for these MSRs.
Delete probe_nhm_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for decoding package cstate limit from
MSR_PKG_CST_CONFIG_CONTROL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract CPU base clock frequency support.
Note that bclk is used by
1. calculate base_hz using MSR_PLATFORM_INFO, which is guarded by
probe_nhm_msrs().
2. dump MSR_PLATFORM_INFO and Turbo Ratio Limit MSRs, which are also
guarded by probe_nhm_msrs().
Thus probe_bclk() works for probe_nhm_msrs() models only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Turbostat supports a series of features that may diverge among different
CPU models.
Current code uses various of CPU model checks in different places to
handle this, which makes the code hard to maintain.
Add skeleton support for table driven feature enumeration to replace the
current error-prone CPU model checks and global variables.
Note: by comparing the CPU models with intel-family.h, it is found that
turbostat support for below four Models are missing, including
INTEL_FAM6_ICELAKE, INTEL_FAM6_ATOM_SILVERMONT_MID,
INTEL_FAM6_ATOM_AIRMONT_MID and INTEL_FAM6_ATOM_AIRMONT_NP. Adding
support for these models is a different work, thus it is not covered in
this patch set.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
INTEL_FAM6_ATOM_SILVERMONT_MID/INTEL_FAM6_ATOM_AIRMONT_MID are not
listed in probe_nhm_msrs(). This means that most of the turbostat
features are not available on these two platforms.
Further more, checking for these two models in has_slv_msrs() is
dead code. Because has_slv_msrs() is called by the code guarded by
probe_nhm_msrs().
For these two reasons, remove pseudo check for
INTEL_FAM6_ATOM_SILVERMONT_MID and INTEL_FAM6_ATOM_AIRMONT_MID.
Will add back the support when we can access these two platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Kernel already has
#define INTEL_FAM6_NEHALEM_G 0x1F /* Auburndale / Havendale */
Use standard Macro for CPU Model instead of raw value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
/sys/class/graphics/fb0/device/drm/card0/ and /sys/class/drm/card0/
point to the same device node.
But in some cases, one exists and the other one does not.
Prefer to use /sys/class/drm/card0/, and fall back to
/sys/class/graphics/fb0/device/drm/card0/.
This recovers the "GFXMHz" and "GFXAMHz" columns on some platforms like
a SPR server.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
All Models that duplicate INTEL_FAM6_CANNONLAKE_L support TCC Offset.
Enable this feature on all these models.
Delete obsolete model_orig.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Currently the C-state Pre-wake will not be printed due to the
probe has not been invoked. Invoke the probe function accordingly.
Fixes: aeb01e6d71 ("tools/power turbostat: Print the C-state Pre-wake settings")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if
1. this is KNL platform
AND
2. need to get C6 residency or need to calculate C1 residency
Fix the broken logic introduced by commit 1e9042b9c8 ("tools/power
turbostat: Fix CPU%C1 display value").
Fixes: 1e9042b9c8 ("tools/power turbostat: Fix CPU%C1 display value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
On some platforms, turbostat fails during launch time like below,
turbostat version 2023.03.17 - Len Brown <lenb@kernel.org>
...
cpu40: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0000 (24 C)
cpu40: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
turbostat: snapshot_sysfs_counter(/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz): No data available
This is because new uncore sysfs is used on these platforms as
introduced by commit 9b8dea80e3 ("platform/x86/intel-uncore-freq:
Support for cluster level controls").
With the new uncore sysfs interface,
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz
is still available, but reading it fails.
How to support the fabric cluster level uncore sysfs is not settled yet,
as a short term fix, clear the BIC_UNCORE_MHZ bit when new sysfs I/F is
detected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Free "tz" if the "trip" allocation fails.
Fixes: 5fc2189f9335 ("ACPI: thermal: Create and populate trip points table earlier")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is very confusing to use *_v2 for everything applicable until SCMI
clock protocol version v2.0 including v1.0 for example. So let us rename
such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also
add comment to indicate the same explicitly.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This is to cater the need for non-ACPI system whereby
a platform device has to be created in order to bind
with the Denverton pinctrl platform driver.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Both pc->async_powercap_cap_set and ignore_dresp are already boolean.
Use of !! on them is obviously dubious.
Sparse reports:
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
Remove the unnecessary !! and get rid of the warning.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230921085257.3125744-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We have a special place for OF polarity quirks in gpiolib-of.c. Let's
move this over there so that it doesn't pollute the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Commit ade8a0f598 ("drm/i915: Make all GPU resets atomic") added a
preempt disable section over the hardware reset callback to prepare the
driver for being able to reset from atomic contexts.
In retrospect I can see that the work item at a time was about removing
the struct mutex from the reset path. Code base also briefly entertained
the idea of doing the reset under stop_machine in order to serialize
userspace mmap and temporary glitch in the fence registers (see
eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex"),
but that never materialized and was soon removed in 2caffbf117
("drm/i915: Revoke mmaps and prevent access to fence registers across
reset") and replaced with a SRCU based solution.
As such, as far as I can see, today we still have a requirement that
resets must not sleep (invoked from submission tasklets), but no need to
support invoking them from a truly atomic context.
Given that the preemption section is problematic on RT kernels, since the
uncore lock becomes a sleeping lock and so is invalid in such section,
lets try and remove it. Potential downside is that our short waits on GPU
to complete the reset may get extended if CPU scheduling interferes, but
in practice that probably isn't a deal breaker.
In terms of mechanics, since the preemption disabled block is being
removed we just need to replace a few of the wait_for_atomic macros into
busy looping versions which will work (and not complain) when called from
non-atomic sections.
v2:
* Fix timeouts which are now in us. (Andi)
* Update one comment as a drive by. (Andi)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926100855.61722-1-tvrtko.ursulin@linux.intel.com
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The OEMID is an 8-bit binary number rather than 16-bit as the current code
parses for. The OEMID occupies bits [111:104] in the CID register, see the
eMMC spec JESD84-B51 paragraph 7.2.3. It seems that the 16-bit comes from
the legacy MMC specs (v3.31 and before).
Let's fix the parsing by simply move to use 8-bit instead of 16-bit. This
means we ignore the impact on some of those old MMC cards that may be out
there, but on the other hand this shouldn't be a problem as the OEMID seems
not be an important feature for these cards.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230927071500.1791882-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct jmb38x_ms.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Tom Rix <trix@redhat.com>
Cc: Len Baker <len.baker@gmx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175249.work.593-kees@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Before, we used syscon to achieve tuning, but the actual measurement
showed little effect, so the tuning implementation was modified here,
and it was realized by reading and writing the UHS_REG_EXT register.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230922062834.39212-3-william.qiu@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to the change of tuning implementation, it's no longer necessary to
use the "starfive,sysreg" property in dts, so remove it from required.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230922062834.39212-2-william.qiu@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
By dynamically adjusting the host->hsq_depth, based upon the buffer size
being 4k and that we get at least two I/O write requests in flight, we can
improve the throughput a bit. This is typical for a random I/O write
pattern.
More precisely, by dynamically changing the number of requests in flight
from 2 to 5, we can on some platforms observe ~4-5% increase in throughput.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230919074707.25517-3-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg, minor adjustment to the code - all to clarify.]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow dynamical updates of the current number of used in-flight
requests, let's move away from using a hard-coded value to a use a
corresponding variable in the struct mmc_host.
This can be valuable when optimizing for certain I/O request sequences, as
shown by subsequent changes.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The support for using link ID in the scan request API was only
added in version 16. However, the code wrongly enabled this
API usage also for older versions. Fix it.
Reported-by: Antoine Beaupré <anarcat@debian.org>
Fixes: e98b23d0d7 ("wifi: iwlwifi: mvm: Add support for SCAN API version 16")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926165546.086e635fbbe6.Ia660f35ca0b1079f2c2ea92fd8d14d8101a89d03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().
Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.
The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.
To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.
Fixes: 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230920153621.711373-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB
can avoid swiotlb lookup. A flag is added by commit 1395706a14 ("swiotlb:
search the software IO TLB only if the device makes use of it"), the flag
is correctly set, but it is then never checked. Add the actual check here.
Note that this code is an alternative to the default pool check, not an
additional check, because:
1. swiotlb_find_pool() also searches the default pool;
2. if dma_uses_io_tlb is false, the default swiotlb pool is not used.
Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and
*not* using software IO TLB, this patch increases IOPS by approx 2% for
4-way parallel I/O.
The write memory barrier in swiotlb_dyn_alloc() is not needed, because a
newly allocated pool must always be observed by swiotlb_find_slots() before
an address from that pool is passed to is_swiotlb_buffer().
Correctness was verified using the following litmus test:
C swiotlb-new-pool
(*
* Result: Never
*
* Check that a newly allocated pool is always visible when the
* corresponding swiotlb buffer is visible.
*)
{
mem_pools = default;
}
P0(int **mem_pools, int *pool)
{
/* add_mem_pool() */
WRITE_ONCE(*pool, 999);
rcu_assign_pointer(*mem_pools, pool);
}
P1(int **mem_pools, int *flag, int *buf)
{
/* swiotlb_find_slots() */
int *r0;
int r1;
rcu_read_lock();
r0 = READ_ONCE(*mem_pools);
r1 = READ_ONCE(*r0);
rcu_read_unlock();
if (r1) {
WRITE_ONCE(*flag, 1);
smp_mb();
}
/* device driver (presumed) */
WRITE_ONCE(*buf, r1);
}
P2(int **mem_pools, int *flag, int *buf)
{
/* device driver (presumed) */
int r0 = READ_ONCE(*buf);
/* is_swiotlb_buffer() */
int r1;
int *r2;
int r3;
smp_rmb();
r1 = READ_ONCE(*flag);
if (r1) {
/* swiotlb_find_pool() */
rcu_read_lock();
r2 = READ_ONCE(*mem_pools);
r3 = READ_ONCE(*r2);
rcu_read_unlock();
}
}
exists (2:r0<>0 /\ 2:r3=0) (* Not found. *)
Fixes: 1395706a14 ("swiotlb: search the software IO TLB only if the device makes use of it")
Reported-by: Jonathan Corbet <corbet@lwn.net>
Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Andrew has changed addresses and the git tree has long since been at a
different location.
-----BEGIN PGP SIGNATURE-----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=SQij
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Jbmx
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes
ASPEED Maintainers update
Andrew has changed addresses and the git tree has long since been at a
different location.
* tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
Link: https://lore.kernel.org/r/CACPK8Xc+D=YBc2Dhk-6-gOuvKN0xGgZYNop6oJVa=VNgaEYOHw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The syscon poweroff and reboot nodes logically belong to the Power
Management Unit so populate possible children.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the
ls2k1000 compatible in the driver can be dropped directly.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>