The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Link: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919194855.347582-1-willy@infradead.org
(cherry picked from commit 26a8e32e6d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch tries to preload extent_cache given POSIX_FADV_WILLNEED, which is
more useful for generic usecases.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6WEW
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- delayed refs fixes:
- fix race when refilling delayed refs block reserve
- prevent transaction block reserve underflow when starting
transaction
- error message and value adjustments
- fix build warnings with CONFIG_CC_OPTIMIZE_FOR_SIZE and
-Wmaybe-uninitialized
- fix for smatch report where uninitialized data from invalid extent
buffer range could be returned to the caller
- fix numeric overflow in statfs when calculating lower threshold
for a full filesystem
* tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize start_slot in btrfs_log_prealloc_extents
btrfs: make sure to initialize start and len in find_free_dev_extent
btrfs: reset destination buffer when read_extent_buffer() gets invalid range
btrfs: properly report 0 avail for very full file systems
btrfs: log message if extent item not found when running delayed extent op
btrfs: remove redundant BUG_ON() from __btrfs_inc_extent_ref()
btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to 1
btrfs: prevent transaction block reserve underflow when starting transaction
btrfs: fix race when refilling delayed refs block reserve
Currently EXPORT_*_SIMPLE_DEV_PM_OPS() use EXPORT_*_DEV_PM_OPS() set
of macros to export dev_pm_ops symbol, which export the symbol in case
CONFIG_PM=y but don't take CONFIG_PM_SLEEP into consideration.
Since _SIMPLE_ variants of _PM_OPS() do not include runtime PM handles
and are only used in case CONFIG_PM_SLEEP=y, we should not be exporting
dev_pm_ops symbol for them in case CONFIG_PM_SLEEP=n.
This can be fixed by having two distinct set of export macros for both
_RUNTIME_ and _SIMPLE_ variants of _PM_OPS(), such that the export of
dev_pm_ops symbol used in each variant depends on CONFIG_PM and
CONFIG_PM_SLEEP respectively.
Introduce _DEV_SLEEP_PM_OPS() set of export macros for _SIMPLE_ variants
of _PM_OPS(), which export dev_pm_ops symbol only in case CONFIG_PM_SLEEP=y
and discard it otherwise.
Fixes: 34e1ed189f ("PM: Improve EXPORT_*_DEV_PM_OPS macros")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The point in iterating variant->mock_domains is to test the idev_ids[0]
and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only.
Link: https://lore.kernel.org/r/20230919011637.16483-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This kselftest fixes update for Linux 6.6-rc4 consists of one
single fix to unmount tracefs when test created mount.
-----BEGIN PGP SIGNATURE-----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=5LK8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
It is invalid to call for_each_thermal_trip() on an unregistered thermal
zone anyway, and as per thermal_zone_device_register_with_trips(), the
trips[] table must be present if num_trips is greater than zero for the
given thermal zone.
Hence, the trips check in for_each_thermal_trip() is redundant and so it
can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that the valid flag in struct acpi_thermal_trip is in fact
redundant, because the temperature field of invalid trips is always
equal to THERMAL_TEMP_INVALID, so drop it from there and adjust the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Trip point flags previously used by the driver need not be used any more
after the preceding changes, so drop them and adjust the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Separate the code needed to update active trips (in a response to a
notification from the platform firmware) as well as to initialize them
from the code that is only necessary for their initialization and
cleanly divide it into functions that each carry out a specific action.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Separate the code needed to update the passive trip (in a response to a
notification from the platform firmware) as well as to initialize it
from the code that is only necessary for its initialization and cleanly
divide it into functions that each carry out a specific action.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that the only piece of information regarding the critical and hot
trips that needs to be stored in the driver's local data structures is
whether or not these trips are valid, so drop all of the redundant
information from there and adjust the code accordingly.
Among other things, this requires acpi_thermal_add() to be rearranged
so as to obtain the critical trip temperature before populating the trip
points table and for symmetry, the hot trip temperature is obtained
earlier too.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Create and populate the driver's trip points table in acpi_thermal_add()
so as to allow the its data structures to be simplified going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Compute the number of trip points in acpi_thermal_add() so as to allow the
driver's data structures to be simplified going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is only one caller of acpi_thermal_get_info() and the code from
it can be folded into its caller just fine, so do that.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the observation that the critical and hot trip points are never
updated by the ACPI thermal driver, because the flags passed from
acpi_thermal_notify() to acpi_thermal_trips_update() do not include
ACPI_TRIPS_CRITICAL or ACPI_TRIPS_HOT, to move the initialization
of those trip points directly into acpi_thermal_get_trip_points() and
reduce the size of __acpi_thermal_trips_update().
Also make the critical and hot trip points initialization code more
straightforward and drop the flags that are not needed any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZRKHuAAKCRCRxhvAZXjc
ohOLAQDU9Fxq5UdqCdmsyi/b24XJFZlQhcVIZy2Hrhcor9TiVQEAjuECGlxFPSgj
atVOWLdugDJquiHextqTEMgIecJpNw4=
=uINF
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains the usual miscellaneous fixes and cleanups for vfs and
individual fses:
Fixes:
- Revert ki_pos on error from buffered writes for direct io fallback
- Add missing documentation for block device and superblock handling
for changes merged this cycle
- Fix reiserfs flexible array usage
- Ensure that overlayfs sets ctime when setting mtime and atime
- Disable deferred caller completions with overlayfs writes until
proper support exists
Cleanups:
- Remove duplicate initialization in pipe code
- Annotate aio kioctx_table with __counted_by"
* tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
overlayfs: set ctime when setting mtime and atime
ntfs3: put resources during ntfs_fill_super()
ovl: disable IOCB_DIO_CALLER_COMP
porting: document superblock as block device holder
porting: document new block device opening order
fs/pipe: remove duplicate "offset" initializer
fs-writeback: do not requeue a clean inode having skipped pages
aio: Annotate struct kioctx_table with __counted_by
direct_write_fallback(): on error revert the ->ki_pos update from buffered write
reiserfs: Replace 1-element array with C99 style flex-array
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
Add the necessary definitions for the PMA8084 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-6-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the qcom,pma8084-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pma8084-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-5-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the necessary definitions for the PM8019 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-4-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the qcom,pm8019-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8019-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-3-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the necessary definitions for the PM8909 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-2-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the qcom,pm8909-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8909-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-1-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZRIFKAAKCRCMstVUGiXM
g/pXAP9HLB2s+beBTK5iQU4/NfqmAVSl303QCoR9xLByo38vfAEAlLiRIh061pTi
PRlXVuY9bUQPyCSYsiBHv/fmLqdQdwU=
=ti6G
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event"
* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
When fixing a memory leak in commit d3c731564e ("regulator: plug
of_node leak in regulator_register()'s error path") it moved the
device_initialize() call earlier, but did not move the `dev->class`
initialization. The bug was spotted and fixed by reverting part of
the commit (in commit 5f4b204b6b "regulator: core: fix kobject
release warning and memory leak in regulator_register()") but
introducing a different bug: now early error paths use `kfree(dev)`
instead of `put_device()` for an already initialized `struct device`.
Move the missing assignments to just after `device_initialize()`.
Fixes: d3c731564e ("regulator: plug of_node leak in regulator_register()'s error path")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/b5b19cb458c40c9d02f3d5a7bd1ba7d97ba17279.1695077303.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sf71fo32.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg19fo4o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jjhh2q1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877codh2qg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875y3xihf7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1]
When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
ASPM L1.2.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document support for the SD Card/MMC interface on the Renesas
RZ/G3S (R9A08G045) SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912045157.177966-32-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230907095521.14053-6-Julia.Lawall@inria.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MMC_SDHI_INTERNAL_DMAC config option has dependency on ARM64 and
R7S9210/R8A77470 this dependency will keep growing for future SoCs for
varying architectures. So to simplify this configuration make
MMC_SDHI_INTERNAL_DMAC solely depend on ARCH_RENESAS, as all Renesas
SoCs inherently depend on the ARCH_RENESAS config option.
This allows selecting MMC_SDHI_INTERNAL_DMAC config option for RZ/Five SoC
which is based on RISC-V architecture.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230901122701.318082-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current manual tuning logic only get the first pass window, but
this pass window maybe not the best pass window.
Now find all the pass window, and chose the largest pass window,
and use the average value of this largest pass window to get the
best timing.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230831032647.3128702-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Qualcomm SDHCI controller lists optional clocks, but still expects
fixed order of them and does not allow to skip such clocks if further
one in the list is needed. These optional clocks are truly optional,
so we need to allow the list to have different orders. The clocks are:
- ice: used for Inline Crypto Engine, which is actually separate block
and merging it with SDHCI is not a requirement,
- bus: clock for SDCC bus frequency voting,
- cal and sleep: used for RCLK delay calibration and required for
certain platforms for such calibration (as expressed in original
commit 4946b3af5e ("mmc: sdhci-msm: Enable delay circuit
calibration clocks")). Only MSM8974pro has these clocks.
Relaxing the order fixes dtbs_check warnings:
qcom-msm8974pro-fairphone-fp2.dtb: mmc@f9824900: clock-names:3: 'ice' was expected
qcom-msm8974pro-fairphone-fp2.dtb: mmc@f9824900: clock-names:4: 'bus' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230825135503.282135-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Userspace has currently no way of checking the internal R1 response error
bits for some commands. This is a problem for some commands, like RPMB for
example. Typically, we may detect that the busy completion has successfully
ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and
during the polling, let's also aggregate the R1 response bits. Before
completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org
To improve the r/w performance of GL9763E, the current driver inhibits LPM
negotiation while the device is active.
This prevents a large number of SoCs from suspending, notably x86 systems
which commonly use S0ix as the suspend mechanism - for example, Intel
Alder Lake and Raptor Lake processors.
Failure description:
1. Userspace initiates s2idle suspend (e.g. via writing to
/sys/power/state)
2. This switches the runtime_pm device state to active, which disables
LPM negotiation, then calls the "regular" suspend callback
3. With LPM negotiation disabled, the bus cannot enter low-power state
4. On a large number of SoCs, if the bus not in a low-power state, S0ix
cannot be entered, which in turn prevents the SoC from entering
suspend.
Fix by re-enabling LPM negotiation in the device's suspend callback.
Suggested-by: Stanislaw Kardach <skardach@google.com>
Fixes: f9e5b33934 ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: stable@vger.kernel.org
Signed-off-by: Sven van Ashbrook <svenva@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230831160055.v3.1.I7ed1ca09797be2dd76ca914c57d88b32d24dac88@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
tuning only support in 4-bit mode or 8 bit mode, so in 1-bit mode,
need to hold retuning.
Find this issue when use manual tuning method on imx93. When system
resume back, SDIO WIFI try to switch back to 4 bit mode, first will
trigger retuning, and all tuning command failed.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: dfa13ebbe3 ("mmc: host: Add facility to support re-tuning")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830093922.3095850-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In the TXT binding before conversion, the "xo" clock was listed as
optional. Conversion kept it optional in "clock-names", but not in
"clocks". This fixes dbts_check warnings like:
qcom-sdx65-mtp.dtb: mmc@8804000: clocks: [[13, 59], [13, 58]] is too short
Cc: <stable@vger.kernel.org>
Fixes: a45537723f ("dt-bindings: mmc: sdhci-msm: Convert bindings to yaml")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230825135503.282135-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ssam_event.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230922175436.work.031-kees@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct bios_args.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175420.work.701-kees@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>