If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been
submitted for the given timeline point the call will fail immediately
with EINVAL. This does not match the intended behavior where the call
should wait until the fence has been submitted (or the timeout expires).
The following small example program illustrates the issue. It should
wait for 5 seconds and then print ETIME, but instead it terminates right
away after printing EINVAL.
#include <stdio.h>
#include <fcntl.h>
#include <time.h>
#include <errno.h>
#include <xf86drm.h>
int main(void)
{
int fd = open("/dev/dri/card0", O_RDWR);
uint32_t syncobj;
drmSyncobjCreate(fd, 0, &syncobj);
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
uint64_t point = 1;
if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1,
ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) {
printf("drmSyncobjTimelineWait failed %d\n", errno);
}
}
Fixes: 01d6c35783 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: Simon Ser <contact@emersion.fd>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1fac96f1-2f3f-f9f9-4eb0-340f27a8f6c0@nvidia.com
Describe network access rules for TCP sockets. Add network access
example in the tutorial. Add kernel configuration support for network.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-13-konstantin.meskhidze@huawei.com
[mic: Update date, and do light cosmetic changes]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add TCP restrictions to the sandboxer demo. It's possible to allow a
sandboxer to bind/connect to a list of specified ports restricting
network actions to the rest of them. This is controlled with the new
LL_TCP_BIND and LL_TCP_CONNECT environment variables.
Rename ENV_PATH_TOKEN to ENV_DELIMITER.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-12-konstantin.meskhidze@huawei.com
[mic: Extend commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add 82 test suites to check edge cases related to bind() and connect()
actions. They are defined with 6 fixtures and their variants:
The "protocol" fixture is extended with 12 variants defined as a matrix
of: sandboxed/not-sandboxed, IPv4/IPv6/unix network domain, and
stream/datagram socket. 4 related tests suites are defined:
* bind: Tests bind action.
* connect: Tests connect action.
* bind_unspec: Tests bind action with the AF_UNSPEC socket family.
* connect_unspec: Tests connect action with the AF_UNSPEC socket family.
The "ipv4" fixture is extended with 4 variants defined as a matrix
of: sandboxed/not-sandboxed, and stream/datagram socket. 1 related test
suite is defined:
* from_unix_to_inet: Tests to make sure unix sockets' actions are not
restricted by Landlock rules applied to TCP ones.
The "tcp_layers" fixture is extended with 8 variants defined as a matrix
of: IPv4/IPv6 network domain, and different number of landlock rule
layers. 2 related tests suites are defined:
* ruleset_overlap: Tests nested layers with less constraints.
* ruleset_expand: Tests nested layers with more constraints.
In the "mini" fixture 4 tests suites are defined:
* network_access_rights: Tests handling of known access rights.
* unknown_access_rights: Tests handling of unknown access rights.
* inval: Tests unhandled allowed access and zero access value.
* tcp_port_overflow: Tests with port values greater than 65535.
The "ipv4_tcp" fixture supports IPv4 network domain with stream socket.
2 tests suites are defined:
* port_endianness: Tests with big/little endian port formats.
* with_fs: Tests a ruleset with both filesystem and network
restrictions.
The "port_specific" fixture is extended with 4 variants defined
as a matrix of: sandboxed/not-sandboxed, IPv4/IPv6 network domain,
and stream socket. 2 related tests suites are defined:
* bind_connect_zero: Tests with port 0.
* bind_connect_1023: Tests with port 1023.
Test coverage for security/landlock is 92.4% of 710 lines according to
gcc/gcov-13.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-11-konstantin.meskhidze@huawei.com
[mic: Extend commit message, update test coverage, clean up capability
use, fix useless TEST_F_FORK, and improve ipv4_tcp.with_fs]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add network rules support in the ruleset management helpers and the
landlock_create_ruleset() syscall. Extend user space API to support
network actions:
* Add new network access rights: LANDLOCK_ACCESS_NET_BIND_TCP and
LANDLOCK_ACCESS_NET_CONNECT_TCP.
* Add a new network rule type: LANDLOCK_RULE_NET_PORT tied to struct
landlock_net_port_attr. The allowed_access field contains the network
access rights, and the port field contains the port value according to
the controlled protocol. This field can take up to a 64-bit value
but the maximum value depends on the related protocol (e.g. 16-bit
value for TCP). Network port is in host endianness [1].
* Add a new handled_access_net field to struct landlock_ruleset_attr
that contains network access rights.
* Increment the Landlock ABI version to 4.
Implement socket_bind() and socket_connect() LSM hooks, which enable
to control TCP socket binding and connection to specific ports.
Expand access_masks_t from u16 to u32 to be able to store network access
rights alongside filesystem access rights for rulesets' handled access
rights.
Access rights are not tied to socket file descriptors but checked at
bind() or connect() call time against the caller's Landlock domain. For
the filesystem, a file descriptor is a direct access to a file/data.
However, for network sockets, we cannot identify for which data or peer
a newly created socket will give access to. Indeed, we need to wait for
a connect or bind request to identify the use case for this socket.
Likewise a directory file descriptor may enable to open another file
(i.e. a new data item), but this opening is also restricted by the
caller's domain, not the file descriptor's access rights [2].
[1] https://lore.kernel.org/r/278ab07f-7583-a4e0-3d37-1bacd091531d@digikod.net
[2] https://lore.kernel.org/r/263c1eb3-602f-57fe-8450-3f138581bee7@digikod.net
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-9-konstantin.meskhidze@huawei.com
[mic: Extend commit message, fix typo in comments, and specify
endianness in the documentation]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Change the landlock_add_rule() syscall to support new rule types with
next commits. Add the add_rule_path_beneath() helper to support current
filesystem rules.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-8-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new key_type argument to the landlock_init_layer_masks() helper.
Add a masks_array_size argument to the landlock_unmask_layers() helper.
These modifications support implementing new rule types in the next
Landlock versions.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-7-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Move and rename landlock_unmask_layers() and landlock_init_layer_masks()
helpers to ruleset.c to share them with Landlock network implementation
in following commits.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-6-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Refactor merge_ruleset() and inherit_ruleset() functions to support new
rule types. Add merge_tree() and inherit_tree() helpers. They use a
specific ruleset's red-black tree according to a key type argument.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-5-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new landlock_key union and landlock_id structure to support a
socket port rule type. A struct landlock_id identifies a unique entry
in a ruleset: either a kernel object (e.g. inode) or typed data (e.g.
TCP port). There is one red-black tree per key type.
Add is_object_pointer() and get_root() helpers. is_object_pointer()
returns true if key type is LANDLOCK_KEY_INODE. get_root() helper
returns a red-black tree root pointer according to a key type.
Refactor landlock_insert_rule() and landlock_find_rule() to support
coming network modifications. Adding or searching a rule in ruleset can
now be done thanks to a Landlock ID argument passed to these helpers.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-4-konstantin.meskhidze@huawei.com
[mic: Fix commit message typo]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Allow mount point and root directory changes when there is no filesystem
rule tied to the current Landlock domain. This doesn't change anything
for now because a domain must have at least a (filesystem) rule, but
this will change when other rule types will come. For instance, a domain
only restricting the network should have no impact on filesystem
restrictions.
Add a new get_current_fs_domain() helper to quickly check filesystem
rule existence for all filesystem LSM hooks.
Remove unnecessary inlining.
Link: https://lore.kernel.org/r/20231026014751.414649-3-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Rename ruleset's access masks and modify it's type to access_masks_t
to support network type rules in following commits. Add filesystem
helper functions to add and get filesystem mask.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-2-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
A couple of platforms have some last-minute fixes for 6.7, in particular
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on
the recent rk3399 platform as well as the older rk3128 platform
that apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its
error handling.
-----BEGIN PGP SIGNATURE-----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=6/SQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This addresses a few comments/issues in my v2 submission:
- repeated word: 'run' from kernel test robot
- emacs/ediff mode from Jon Corbet
- various comments from Willy Tarreau
- more backporting advice from Ben Hutchings
- a couple more cherry-pick tips from Harshit Mogalapalli
- add a bit about stable submissions
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20231023135722.949510-1-vegard.nossum@oracle.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
tools/testing/cxl contains the unit test infrastructure for mocking CXL
hierarchies. These are under the purview of the CXL subsystem maintainers.
Add the 'F:' entry for this to MAINTAINERS so that get_maintainer.pl
works as expected for patches to this area.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20231026-vv-mainteners-fix-v1-1-0a0f25634073@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Most regressions addressed here come from quite old versions, with
the exceptions of the iavf one and the WiFi fixes. No known
outstanding reports or investigation.
Fixes to fixes:
- eth: iavf: in iavf_down, disable queues when removing the driver
Previous releases - regressions:
- sched: act_ct: additional checks for outdated flows
- tcp: do not leave an empty skb in write queue
- tcp: fix wrong RTO timeout when received SACK reneging
- wifi: cfg80211: pass correct pointer to rdev_inform_bss()
- eth: i40e: sync next_to_clean and next_to_process for programming status desc
- eth: iavf: initialize waitqueues before starting watchdog_task
Previous releases - always broken:
- eth: r8169: fix data-races
- eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry
- eth: r8152: avoid writing garbage to the adapter's registers
- eth: gtp: fix fragmentation needed check with gso
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=7acu
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Most regressions addressed here come from quite old versions, with the
exceptions of the iavf one and the WiFi fixes. No known outstanding
reports or investigation.
Fixes to fixes:
- eth: iavf: in iavf_down, disable queues when removing the driver
Previous releases - regressions:
- sched: act_ct: additional checks for outdated flows
- tcp: do not leave an empty skb in write queue
- tcp: fix wrong RTO timeout when received SACK reneging
- wifi: cfg80211: pass correct pointer to rdev_inform_bss()
- eth: i40e: sync next_to_clean and next_to_process for programming
status desc
- eth: iavf: initialize waitqueues before starting watchdog_task
Previous releases - always broken:
- eth: r8169: fix data-races
- eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry
- eth: r8152: avoid writing garbage to the adapter's registers
- eth: gtp: fix fragmentation needed check with gso"
* tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
iavf: in iavf_down, disable queues when removing the driver
vsock/virtio: initialize the_virtio_vsock before using VQs
net: ipv6: fix typo in comments
net: ipv4: fix typo in comments
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
gtp: fix fragmentation needed check with gso
gtp: uapi: fix GTPA_MAX
Fix NULL pointer dereference in cn_filter()
sfc: cleanup and reduce netlink error messages
net/handshake: fix file ref count in handshake_nl_accept_doit()
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
isdn: mISDN: hfcsusb: Spelling fix in comment
tcp: fix wrong RTO timeout when received SACK reneging
r8152: Block future register access if register access fails
r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
...
PPS documentation has a generalized section for generators. Update the
section so any new generator documentation can be appended.
Signed-off-by: Pandith N <pandith.n@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231016101953.27308-1-lakshmi.sowjanya.d@intel.com
Our system administrator have noted that the names 'rt-to-be' and
'all-to-idle' in the I/O priority policies table appeared without
explanations, leading to confusion. Let's bring these names in line
with the naming in the 'attribute' section.
Additionally,
1. Correct the interface name to 'io.prio.class'.
2. Add a table entry of 'promote-to-rt' for consistency.
3. Fix a typo of 'priority'.
Suggested-by: Yingfu Zhou <yingfu.zhou@shopee.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231012024228.2161283-1-yizhou.tang@shopee.com
Add tma_info_system_socket_clks and uncore_freq metrics.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add tma_info_system_socket_clks and uncore_freq metrics that require a
broadwellx style uncore event for UNC_CLOCK.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Fixes: 7d124303d6 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Initialize the CBO variables on ACPI based systems using information in
RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Cache Block Operation (CBO) related block size in ACPI is provided by RHCT.
Add support to read the CMO node in RHCT to get this information.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
acpi_get_rhct() currently returns pointer to acpi_table_header
structure. But since this is specific to RHCT, return pointer to
acpi_table_rhct structure itself.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enhance the acpi_os_ioremap() to support opregions in MMIO space. Also,
have strict checks using EFI memory map to allow remapping the RAM similar
to arm64.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The pci_epc_release() function frees "epc" so the kfree() on the next line
is a double free. Drop the redundant free.
Fixes: 7711cbb486 ("PCI: endpoint: Fix WARN() when an endpoint driver is removed")
Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com
Merge series from Hans de Goede <hdegoede@redhat.com>:
Hi Mark,
As requested here is a v2 of my series to add various quirks
to the bytcr_wm5102 Intel board driver to make it more flexible.
Changes in v2:
- Dropped 2 already merged patches
- Rebased on top of broonie/sound/for-6.7
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_MCLK_19_2MHZ quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_OUT_MAP quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_IN_MAP quirk
sound/soc/intel/boards/bytcr_wm5102.c | 229 +++++++++++++++++++++++---
1 file changed, 202 insertions(+), 27 deletions(-)
--
2.41.0
Merge series from Nikita Travkin <nikita@trvn.ru>:
Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
instead must use adsp core to play sound. Since otherwise the hardware
is, usually, very similar across the devices on the same platform, it
makes sense to reuse the same boardfile.
This series refactors the sc7180.c slightly and adds the functions to
control clocks via adsp instead of controlling the hardware directly.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring
the component name prefix. If prefix is used, the comparisons start failing.
Except Qualcomm lpass-rx-macro, none of the patches were tested
on hardware.
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CSPL firmware should be in RUNNING or PAUSED state after loading.
If not, the firmware has not been loaded correctly, and we can unload
it and pass the error up.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-8-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Given the part is about to reset due to system suspend, and we are
already in hibernate, there is no need to wake up the amp, just to get
it ready to be reset. We just need to ensure cs_dsp is ready for reset
by resetting the states.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-7-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During initial probe, after reset is asserted for the first time, the
driver goes through a boot process to ensure the amp is ready to be
used. This involves verifying a boot flag, as well as verifying the
chip ids.
This is necessary since it is possible for the amp to have been fully
reset by the system suspend calls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure we are in a known state, exiting from reset at the point of
probe or in system resume, assert reset before we de-assert it.
Since the BIOS may enter into a pre-boot environment to control the
amps (for example for boot beep), we need to ensure we start from a
known, reset state prior to probe or system resume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some system suspend modes may remove power supplies.
To ensure we are not running during this time, we should assert reset.
Note: since the amps use a shared reset, asserting reset prior to
system suspend only works if the amps are suspended in the reverse
order to probe.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop has an incorrect setting in its _DSD for boost type, but
the rest of the _DSD is correct, and we can still use the reset label
to obtain the reset gpio.
Also fix channel map so that amp 0 is right, and amp 1 is left.
Fixes: 581523ee36 ("ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we sync the register cache we do so with the cache bypassed in order
to avoid overhead from writing the synced values back into the cache. If
the regmap has ranges and the selector register for those ranges is in a
register which is cached this has the unfortunate side effect of meaning
that the physical and cached copies of the selector register can be out of
sync after a cache sync. The cache will have whatever the selector was when
the sync started and the hardware will have the selector for the register
that was synced last.
Fix this by rewriting all cached selector registers after every sync,
ensuring that the hardware and cache have the same content. This will
result in extra writes that wouldn't otherwise be needed but is simple
so hopefully robust. We don't read from the hardware since not all
devices have physical read support.
Given that nobody noticed this until now it is likely that we are rarely if
ever hitting this case.
Reported-by: Hector Martin <marcan@marcan.st>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
match_decoder_by_range() and decoder_match_range() both determine
if an HPA range matches a decoder. The first does it for root
decoders and the second one operates on switch decoders.
Tidy these up with clear naming and make the switch helper more
like the root decoder helper in style and functionality. Make it
take the actual range, rather than an endpoint decoder from which
it extracts the range. Require an exact match on switch decoders,
because unlike a root decoder that maps an entire region, Linux
only supports 1:1 mapping of switch to endpoint decoders. Note that
root-decoders are a super-set of switch-decoders and the range they
cover is a super-set of a region, hence the use of range_contains() for
that case.
Aside from aesthetics and maintainability, this is in preparation
for reuse.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/011b1f498e1758bb8df17c5951be00bd8d489e3b.1698263080.git.alison.schofield@intel.com
[djbw: fixup root decoder vs switch decoder range checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.
This went unnoticed until commit:
34f66c4c4d ("arm64: Use a positive cpucap for FP/SIMD")
Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.
After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.
| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp : ffffd014173d3ad0
| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0xec/0x108
| show_stack+0x18/0x2c
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| panic+0x13c/0x340
| el1t_64_irq_handler+0x0/0x1c
| el1_abort+0x0/0x5c
| el1h_64_sync+0x64/0x68
| __pi_strcmp+0x1c/0x150
| unflatten_dt_nodes+0x1e8/0x2d8
| __unflatten_device_tree+0x5c/0x15c
| unflatten_device_tree+0x38/0x50
| setup_arch+0x164/0x1e0
| start_kernel+0x64/0x38c
| __primary_switched+0xbc/0xc4
Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: 1379b15099
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
