This is trivial patch to mate parameter name between iommu api enabled case and
disabled case.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: KyongHo Cho <pullip.cho@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
header files local where possible to get us closer to supporting
the ARM single zImage. After these changes mach includes are
pretty much out of the way for omap2+, but still lots of manual
work remains to sort through the remaining plat includes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=TZVo
-----END PGP SIGNATURE-----
Merge tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
From Tony Lindgren:
This branch contains mostly scripted changes to make omap
header files local where possible to get us closer to supporting
the ARM single zImage. After these changes mach includes are
pretty much out of the way for omap2+, but still lots of manual
work remains to sort through the remaining plat includes.
* tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
ARM: OMAP2+: Make omap4-keypad.h local
ARM: OMAP2+: Make l4_3xxx.h local
ARM: OMAP2+: Make l4_2xxx.h local
ARM: OMAP2+: Make l3_3xxx.h local
ARM: OMAP2+: Make l3_2xxx.h local
ARM: OMAP1: Move irda.h from plat to mach
ARM: OMAP2+: Make hdq1w.h local
ARM: OMAP2+: Make gpmc-smsc911x.h local
ARM: OMAP2+: Make gpmc-smc91x.h local
ARM: OMAP1: Move flash.h from plat to mach
ARM: OMAP2+: Make debug-devices.h local
ARM: OMAP1: Move board-voiceblue.h from plat to mach
ARM: OMAP1: Move board-sx1.h from plat to mach
ARM: OMAP2+: Make omap-wakeupgen.h local
ARM: OMAP2+: Make omap-secure.h local
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
ARM: OMAP2+: Make ctrl_module_core_44xx.h local
ARM: OMAP2+: Make board-rx51.h local
...
and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQW8LwAAoJEFBXWFqHsHzOtVgIAJN8Y2vHgI4kqMmMlXW8QhGj
7YNdFiWlLdhJL9jMOw2v8GwacUZ6x9HsgdK0h6DW3jERi54P7iafdsiFjRH2x8CI
PBNT8Qk9wyZnLNHq1bEUQIg7Nra1aZY9btEzqq0tpRYeJ9PMrgWOrI0ndQiSkTK7
xiYmJATBeQWFPUCGKUDtb9wuDLQ0gQSe1aE0zRkKoIgMn8/cKrbHO1TXh50QC4rt
hie0TkkCvPqeBGae6CTBd0AHFglNMCprwXIsHnnsmPrQdUZCLg9Eum+SDNRR2g19
g3COd+ecUfxtZpsJjdj/iV078nRPqg4GNCj3KO4dgmzHOe72Aed0xNcHNiTJoC0=
=5dum
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo:
This is the second round of imx-dt patches for 3.7. It's based on
and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled.
* tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
ARM: dts: imx6q-sabrelite: add usbmisc device
mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQW8PHAAoJEFBXWFqHsHzO4GYH/jMaG4hFP4Epmxo88WJGhU4l
6ZNI1Gz90XGnx+EKJY7B30cRkvO/ydWrlUB0lMMnKdXuM/okAV66TFWrNTaEWjq1
15xlfn7jlpxY2lu2zflw3sM00jAL65AJDG3G4hA+ZnQlRo4G5MHYHAAGUawwxBJl
J0P0ZSGrVvZ82wGnW2FhvjrF0WR6Ni0mrhRnWQhsub9lykc4YUgOhG0IgxAh8jMx
RW7cR1o4St8ro4vm4joJdEa+ZQDprQDQsMJBOkacTb3SH4uDNpJpSeFVXa7BMSZ+
A8UpG+aHELyCJKU3gHuApcxS0tiK+vd1p0dikRGu6y167hHcKkzqZyVqOYTMrOU=
=/jro
-----END PGP SIGNATURE-----
Merge tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo:
This is the second round of mxs-dt patches for 3.7. It's based on
mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc.
* tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: m28evk: Disable OCOTP OUI loading
ARM: dts: imx23-olinuxino: Add USB host support
ARM: dts: mx23: Add USB resources
ARM: dts: mxs: Add ethernetX to macX aliases
This branch mainly removes dead code following the removal of all board
files. The removals depend on various changes in other branches, so they
are all merged together and form the basis of this branch, as enumerated
below.
Finally, there are no remaining users of pinconf-tegra.h outside the
pinctrl subsystem, so that header is incorporated into an existing file
there. This reduces the number of headers in mach-tegra/include, and so
helps move towards single zImage.
This branch is based on tegra-for-3.7-cleanup, followed by a merge of
tegra-for-3.7-board-removal, followed by a merge of
tegra-for-3.7-common-clk, followed by a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv-for-v3.7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ltZ+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.7-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup2
ARM: tegra: second round of cleanups
This branch mainly removes dead code following the removal of all board
files. The removals depend on various changes in other branches, so they
are all merged together and form the basis of this branch, as enumerated
below.
Finally, there are no remaining users of pinconf-tegra.h outside the
pinctrl subsystem, so that header is incorporated into an existing file
there. This reduces the number of headers in mach-tegra/include, and so
helps move towards single zImage.
This branch is based on tegra-for-3.7-cleanup, followed by a merge of
tegra-for-3.7-board-removal, followed by a merge of
tegra-for-3.7-common-clk, followed by a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv-for-v3.7
By Stephen Warren (16) and others
via Stephen Warren
* tag 'tegra-for-3.7-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (29 commits)
pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl
ARM: tegra: delete unused headers
ARM: tegra: remove useless includes of <mach/*.h>
ARM: tegra: remove dead code
ARM: dt: tegra: harmony: configure power off
ARM: dt: tegra: harmony: add regulators
ARM: tegra: remove board (but not DT) support for Harmony
ARM: tegra: remove board (but not DT) support for Paz00
ARM: tegra: remove board (but not DT) support for TrimSlice
ARM: Tegra: Add smp_twd clock for Tegra20
ARM: tegra: cpu-tegra: explicitly manage re-parenting
ARM: tegra: fix overflow in tegra20_pll_clk_round_rate()
ARM: tegra: Fix data type for io address
ARM: tegra: remove tegra_timer from tegra_list_clks
ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name
ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30
ARM: tegra: Remove duplicate code
ARM: tegra: Port tegra to generic clock framework
ARM: tegra: Add clk_tegra structure and helper functions
ARM: tegra: Rename tegra20 clock file
...
nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.
Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.
We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.
Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/qVp
-----END PGP SIGNATURE-----
Merge tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into next/cleanup2
usb: xceiv: patches for v3.7 merge window
nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.
Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.
We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.
Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.
* tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: otg: mxs-phy: Fix mx23 operation
usb: dwc3: add basic PHY support
usb: dwc3: exynos: add nop transceiver support
usb: dwc3: omap: add nop transceiver support
usb: dwc3: pci: add nop transceiver support
usb: otg: move the dereference below the NULL test
arm: omap: phy: remove unused functions from omap-phy-internal.c
usb: twl4030: Add device tree support for twl4030 usb
usb: twl6030: Add dt support for twl6030 usb
usb: otg: make twl6030_usb as a comparator driver to omap_usb2
usb: phy: add a new driver for omap usb2 phy
usb: phy: fix build break
usb: move phy driver from mach-tegra to drivers/usb
usb: otg: Move phy interface to separate file.
usb: phy: isp1301: Remove unused static array and define
usb: phy: mv_u3d: Add usb phy driver for mv_u3d
usb: otg: Remove the unneeded NULL check
usb: xceiv: nop: let it work as USB2 and USB3 phy
usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.h
Signed-off-by: Olof Johansson <olof@lixom.net>
The Tegra code-base has contained both a legacy DMA and a dmaengine
driver since v3.6-rcX. This series flips Tegra's defconfig to enable
dmaengine rather than the legacy driver, and removes the legacy driver
and all client code.
The branch is based on v3.6-rc6 in order to pick up a bug-fix to the
ASoC Tegra PCM driver that's required for audio to work correctly when
using dmaengine.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=4eRL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
ARM: tegra: switch to dmaengine
The Tegra code-base has contained both a legacy DMA and a dmaengine
driver since v3.6-rcX. This series flips Tegra's defconfig to enable
dmaengine rather than the legacy driver, and removes the legacy driver
and all client code.
* tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ASoC: tegra: remove support of legacy DMA driver based access
spi: tegra: remove support of legacy DMA driver based access
ARM: tegra: apbio: remove support of legacy DMA driver based access
ARM: tegra: dma: remove legacy APB DMA driver
ARM: tegra: config: enable dmaengine based APB DMA driver
+ sync to 3.6-rc6
On Harmony, LDO7 does not feed vdd_fuse. Correct the regulator name.
This issue was probably the result of copying Ventana's regulator setup
when creating the Harmony .dts file. No other naming issues appear to
exist.
Reported-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Jeff Kirsher says:
====================
This series contains updates to igb and ixgbevf.
v2: updated patch description in 04 patch (ixgbevf: scheduling while
atomic in reset hw path)
...
Akeem G. Abodunrin (1):
igb: Support to enable EEE on all eee_supported devices
Alexander Duyck (2):
igb: Remove artificial restriction on RQDPC stat reading
ixgbevf: Add support for VF API negotiation
John Fastabend (1):
ixgbevf: scheduling while atomic in reset hw path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A change in a series of VLAN-related changes appears to have
inadvertently disabled the use of the scatter gather feature of
network cards for transmission of non-IP ethernet protocols like ATA
over Ethernet (AoE). Below is a reference to the commit that
introduces a "harmonize_features" function that turns off scatter
gather when the NIC does not support hardware checksumming for the
ethernet protocol of an sk buff.
commit f01a5236bd
Author: Jesse Gross <jesse@nicira.com>
Date: Sun Jan 9 06:23:31 2011 +0000
net offloading: Generalize netif_get_vlan_features().
The can_checksum_protocol function is not equipped to consider a
protocol that does not require checksumming. Calling it for a
protocol that requires no checksum is inappropriate.
The patch below has harmonize_features call can_checksum_protocol when
the protocol needs a checksum, so that the network layer is not forced
to perform unnecessary skb linearization on the transmission of AoE
packets. Unnecessary linearization results in decreased performance
and increased memory pressure, as reported here:
http://www.spinics.net/lists/linux-mm/msg15184.html
The problem has probably not been widely experienced yet, because
only recently has the kernel.org-distributed aoe driver acquired the
ability to use payloads of over a page in size, with the patchset
recently included in the mm tree:
https://lkml.org/lkml/2012/8/28/140
The coraid.com-distributed aoe driver already could use payloads of
greater than a page in size, but its users generally do not use the
newest kernels.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order for the network layer to see that AoE requires
no checksumming in a generic way, the packets must be
marked as requiring no checksum, so we make this requirement
explicit with the assertion.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
we are currently returning ENODEV, as the clk_get may give a exact
error code in its returned pointer, assign it to the ret by using the
PTR_ERR function, so that the subsequent goto label will jump to the
error path and clean the driver and return the error correctly.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On board keys on Origen board can serve as wakeup sources,
hence they are marked accordingly in the device tree file.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The clock instance parameter in Samsung clock interface is not being checked
for NULL pointers. Add checks for NULL pointers.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The clocks for PCM, Slimbus, Spdif added to off list in order
to turn them off at boot time.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Remove unnecessary temporary variable and #ifdef DEBUG block.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the bus clock for FIMD and changes the device name
for lcd clock
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit adds basic device tree for Exynos4210-based Trats board.
Currently it provides support for eMMC over sdhci and MAX8997 PMIC.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Currently all boards must explicitly disable all unused device tree
nodes of unused components (e.g. i2c, sdhci, etc...). This makes it
necessary to all boards to be aware of all components on the SoC, which
in turns makes board dts files longer and more difficult to maintain
(e.g. adding new components to SoC-level tree requires adding nodes with
status="disabled" to every board).
This patch changes "status" of all optional components in SoC-level dts
file to "disabled", adds status="okay" to respective nodes of used
components in dts of all boards and removes all nodes with only
status="disabled" from boards dts.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Since mach-exynos4-dt.c is also going to be used for other SoCs from EXYNOS4
line, rename internal structures and functions to use exynos4_ prefix, instead
of exynos4210_.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Most definitions from exynos4210.dtsi can be applied for other SoCs from
EXYNOS4 line as well, so move the common part into separate file that
can be included by dtsi files of other EXYNOS4 SoCs (as well as current
exynos4210.dtsi).
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
[kgene.kim@samsung.com: Dongjin Kim <dongjin.kim@agreeyamobility.net>
submitted a similar patch 'Add DTS files derived from common EXYNOS4'
before this but I picked this up because of included exynos4x12 stuff]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This is really minor, but it improves the readability.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Declare a variable at one line and align lines.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Declare a variable at one line. Just return when no charger exists to make
code simpler.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
If the charger is pulled out, just return as DISCHARGING. Then no need for
additional 'else' statement.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Charger has only one valid property - ONLINE. If the property is not
ONLINE, then just return quickly.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Just return with lp8727_write_byte(), no need to check its value.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Change return type to boolean. Remove unnecessary check routine for NULL
string. (Power supply name is always valid when the function is executed.)
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Add new LP8727_ICHG_SHIFT definition and replace a magic number. Reuse
definition for the size of interrupt register buffer.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
All definitions should be unique, since they're in the gloabl namespace.
So the prefix LP8727_ are added. Additionally, use BIT() macro for bit
masks. Remove unnecessary definitions such as SW_DM1_U1 and SW_DP2_U2.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Enum lp8727_chg_state can be removed because only one charger status is
used - EOC(End Of Charge).
To check whether the EOC is reached or not, use simple comparison rather
than shift-operation.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
For better understanding, use specific function and definitions rather
than magic numbers. New enum type for die temperature is matched with hex
codes. Specific temperature names are better than 0x1, 0x2 and 0x3.
And lp8727_is_high_temperature() function has better readability than
comparing raw register values.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
To initialize the device, previous interrupts need to be cleared while
loading the driver.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
For better understanding, function name is changed. (lp8727_intr_config()
is replaced with lp8727_setup_irq().)
The private IRQ number is set when the IRQ is allocated successfully. This
data is used for releasing the IRQ on unloading the driver. Even the IRQ
number is not defined, the driver should be operated. In this case, just
return as 0.
In additional function lp8727_release_irq(), the workqueue is canceled and
the allocated IRQ is released.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
LP8727 has two IRQ threads. One is the I2C HW IRQ pin, the other is for
delayed interrupt processing. But this delayed processing can be handled
without additional single thread by using schedule_delayed_work() with
jiffies time value.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Debounce time is configurable in the platform side. If it is not defined,
the default value is 270ms.
Platform data is msec unit, and this time is converted to jiffies
internally. The workqueue uses this jiffies time in the interrupt
handling. So debounce_jiffies is added in the private data.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
LP8727 platform data is optional, so the driver should work even the
platform data is NULL.
To check the platform data, charging parameter data should be changed to
the pointer type.
Fix NULL point access problem when getting the battery properties. When
the data is NULL, just return as invalid value.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
If the lp8727_register_psy() gets failed, registered interrupt handler
should be freed, but this is not complete solution. It has still problem.
Assume that the IRQ occurs while unregistering power supply devices. Then
the ISR will access to freed IRQ.
From Anton's opinion, it can be resolved if re-ordering the call sequence.
Register power supplies first, then create interrupt handler. Then no need
to free the IRQ in _probe(). Additionally goto statements can be removed
because those can be replaced with return statements.
The _remove() should be changed the sequence - in reverse order of
_probe()
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Use devm_kzalloc() rather than kzalloc()/kfree() to make
allocating/freeing the private data simpler.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
This branch includes some late device tree changes for Tegra:
A property is added to Whistler's device tree to enable the PMIC to
act as the pm_power_off() implementation.
A number of new device tree are added for boards from Avionic Design.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=s7Ln
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt
ARM: tegra: second round of device tree changes
This branch includes some late device tree changes for Tegra:
A property is added to Whistler's device tree to enable the PMIC to
act as the pm_power_off() implementation.
A number of new device tree are added for boards from Avionic Design.
* tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
ARM: tegra: Add Avionic Design Medcom-Wide support
ARM: tegra: Add Avionic Design Plutux support
ARM: tegra: Add Avionic Design Tamonten support
ARM: tegra: dts: Add pwm label
ARM: dt: tegra: whistler: configure power off
The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic
support for this SoC; enough to boot the system into an initrd with
UART console, interrupt controller, timers, and a stub clock driver.
Also provided is a similarly basic device tree for the Raspberry Pi
Model B board.
This series was written by Simon Arlott, Chris Boot, and Dom Cobley
downstream, with reference to a Broadcom tree, and modified for upstream
and submitted by Stephen Warren.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=vqsx
-----END PGP SIGNATURE-----
Merge tag 'rpi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc
ARM: add basic BCM2835 SoC and Raspberry Pi board support
The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic
support for this SoC; enough to boot the system into an initrd with
UART console, interrupt controller, timers, and a stub clock driver.
Also provided is a similarly basic device tree for the Raspberry Pi
Model B board.
This series was written by Simon Arlott, Chris Boot, and Dom Cobley
downstream, with reference to a Broadcom tree, and modified for upstream
and submitted by Stephen Warren.
* tag 'rpi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
ARM: bcm2835: instantiate console UART
ARM: bcm2835: add stub clock driver
ARM: bcm2835: add system timer
ARM: bcm2835: add interrupt controller driver
ARM: add infra-structure for BCM2835 and Raspberry Pi
Like 8250 driver, when pstore is registered as a console,
to avoid recursive spinlocks when panic happening, change the
spin_lock_irqsave to spin_trylock_irqsave when oops_in_progress
is true.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
