When we free the PFNs and then subsequently populate them back
during bootup:
Freeing 20000-20200 pfn range: 512 pages freed
1-1 mapping on 20000->20200
Freeing 40000-40200 pfn range: 512 pages freed
1-1 mapping on 40000->40200
Freeing bad80-badf4 pfn range: 116 pages freed
1-1 mapping on bad80->badf4
Freeing badf6-bae7f pfn range: 137 pages freed
1-1 mapping on badf6->bae7f
Freeing bb000-100000 pfn range: 282624 pages freed
1-1 mapping on bb000->100000
Released 283999 pages of unused memory
Set 283999 page(s) to 1-1 mapping
Populating 1acb8a-1f20e9 pfn range: 283999 pages added
We end up having the P2M array (that is the one that was
grafted on the P2M tree) filled with IDENTITY_FRAME or
INVALID_P2M_ENTRY) entries. The patch titled
"xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID."
recycles said slots and replaces the P2M tree leaf's with
&mfn_list[xx] with p2m_identity or p2m_missing.
And re-uses the P2M array sections for other P2M tree leaf's.
For the above mentioned bootup excerpt, the PFNs at
0x20000->0x20200 are going to be IDENTITY based:
P2M[0][256][0] -> P2M[0][257][0] get turned in IDENTITY_FRAME.
We can re-use that and replace P2M[0][256] to point to p2m_identity.
The "old" page (the grafted P2M array provided by Xen) that was at
P2M[0][256] gets put somewhere else. Specifically at P2M[6][358],
b/c when we populate back:
Populating 1acb8a-1f20e9 pfn range: 283999 pages added
we fill P2M[6][358][0] (and P2M[6][358], P2M[6][359], ...) with
the new MFNs.
That is all OK, except when we revector we assume that the PFN
count would be the same in the grafted P2M array and in the
newly allocated. Since that is no longer the case, as we have
holes in the P2M that point to p2m_missing or p2m_identity we
have to take that into account.
[v2: Check for overflow]
[v3: Move within the __va check]
[v4: Fix the computation]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We call memblock_reserve for [start of mfn list] -> [PMD aligned end
of mfn list] instead of <start of mfn list> -> <page aligned end of mfn list].
This has the disastrous effect that if at bootup the end of mfn_list is
not PMD aligned we end up returning to memblock parts of the region
past the mfn_list array. And those parts are the PTE tables with
the disastrous effect of seeing this at bootup:
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1860k freed
Freeing unused kernel memory: 200k freed
(XEN) mm.c:2429:d0 Bad type (saw 1400000000000002 != exp 7000000000000000) for mfn 116a80 (pfn 14e26)
...
(XEN) mm.c:908:d0 Error getting mfn 116a83 (pfn 14e2a) from L1 entry 8000000116a83067 for l1e_owner=0, pg_owner=0
(XEN) mm.c:908:d0 Error getting mfn 4040 (pfn 5555555555555555) from L1 entry 0000000004040601 for l1e_owner=0, pg_owner=0
.. and so on.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Please first read the description in "xen/mmu: Copy and revector the
P2M tree."
At this stage, the __ka address space (which is what the old
P2M tree was using) is partially disassembled. The cleanup_highmap
has removed the PMD entries from 0-16MB and anything past _brk_end
up to the max_pfn_mapped (which is the end of the ramdisk).
The xen_remove_p2m_tree and code around has ripped out the __ka for
the old P2M array.
Here we continue on doing it to where the Xen page-tables were.
It is safe to do it, as the page-tables are addressed using __va.
For good measure we delete anything that is within MODULES_VADDR
and up to the end of the PMD.
At this point the __ka only contains PMD entries for the start
of the kernel up to __brk.
[v1: Per Stefano's suggestion wrapped the MODULES_VADDR in debug]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Please first read the description in "xen/p2m: Add logic to revector a
P2M tree to use __va leafs" patch.
The 'xen_revector_p2m_tree()' function allocates a new P2M tree
copies the contents of the old one in it, and returns the new one.
At this stage, the __ka address space (which is what the old
P2M tree was using) is partially disassembled. The cleanup_highmap
has removed the PMD entries from 0-16MB and anything past _brk_end
up to the max_pfn_mapped (which is the end of the ramdisk).
We have revectored the P2M tree (and the one for save/restore as well)
to use new shiny __va address to new MFNs. The xen_start_info
has been taken care of already in 'xen_setup_kernel_pagetable()' and
xen_start_info->shared_info in 'xen_setup_shared_info()', so
we are free to roam and delete PMD entries - which is exactly what
we are going to do. We rip out the __ka for the old P2M array.
[v1: Fix smatch warnings]
[v2: memset was doing 0 instead of 0xff]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
During bootup Xen supplies us with a P2M array. It sticks
it right after the ramdisk, as can be seen with a 128GB PV guest:
(certain parts removed for clarity):
xc_dom_build_image: called
xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff81e43000 (pfn 0x1000 + 0xe43 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0xe43 at 0x7f097d8bf000
xc_dom_alloc_segment: ramdisk : 0xffffffff81e43000 -> 0xffffffff925c7000 (pfn 0x1e43 + 0x10784 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x1e43+0x10784 at 0x7f0952dd2000
xc_dom_alloc_segment: phys2mach : 0xffffffff925c7000 -> 0xffffffffa25c7000 (pfn 0x125c7 + 0x10000 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x125c7+0x10000 at 0x7f0942dd2000
xc_dom_alloc_page : start info : 0xffffffffa25c7000 (pfn 0x225c7)
xc_dom_alloc_page : xenstore : 0xffffffffa25c8000 (pfn 0x225c8)
xc_dom_alloc_page : console : 0xffffffffa25c9000 (pfn 0x225c9)
nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s)
nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s)
nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s)
nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffffa27fffff, 276 table(s)
xc_dom_alloc_segment: page tables : 0xffffffffa25ca000 -> 0xffffffffa26e1000 (pfn 0x225ca + 0x117 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x225ca+0x117 at 0x7f097d7a8000
xc_dom_alloc_page : boot stack : 0xffffffffa26e1000 (pfn 0x226e1)
xc_dom_build_image : virt_alloc_end : 0xffffffffa26e2000
xc_dom_build_image : virt_pgtab_end : 0xffffffffa2800000
So the physical memory and virtual (using __START_KERNEL_map addresses)
layout looks as so:
phys __ka
/------------\ /-------------------\
| 0 | empty | 0xffffffff80000000|
| .. | | .. |
| 16MB | <= kernel starts | 0xffffffff81000000|
| .. | | |
| 30MB | <= kernel ends => | 0xffffffff81e43000|
| .. | & ramdisk starts | .. |
| 293MB | <= ramdisk ends=> | 0xffffffff925c7000|
| .. | & P2M starts | .. |
| .. | | .. |
| 549MB | <= P2M ends => | 0xffffffffa25c7000|
| .. | start_info | 0xffffffffa25c7000|
| .. | xenstore | 0xffffffffa25c8000|
| .. | cosole | 0xffffffffa25c9000|
| 549MB | <= page tables => | 0xffffffffa25ca000|
| .. | | |
| 550MB | <= PGT end => | 0xffffffffa26e1000|
| .. | boot stack | |
\------------/ \-------------------/
As can be seen, the ramdisk, P2M and pagetables are taking
a bit of __ka addresses space. Which is a problem since the
MODULES_VADDR starts at 0xffffffffa0000000 - and P2M sits
right in there! This results during bootup with the inability to
load modules, with this error:
------------[ cut here ]------------
WARNING: at /home/konrad/ssd/linux/mm/vmalloc.c:106 vmap_page_range_noflush+0x2d9/0x370()
Call Trace:
[<ffffffff810719fa>] warn_slowpath_common+0x7a/0xb0
[<ffffffff81030279>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[<ffffffff81071a45>] warn_slowpath_null+0x15/0x20
[<ffffffff81130b89>] vmap_page_range_noflush+0x2d9/0x370
[<ffffffff81130c4d>] map_vm_area+0x2d/0x50
[<ffffffff811326d0>] __vmalloc_node_range+0x160/0x250
[<ffffffff810c5369>] ? module_alloc_update_bounds+0x19/0x80
[<ffffffff810c6186>] ? load_module+0x66/0x19c0
[<ffffffff8105cadc>] module_alloc+0x5c/0x60
[<ffffffff810c5369>] ? module_alloc_update_bounds+0x19/0x80
[<ffffffff810c5369>] module_alloc_update_bounds+0x19/0x80
[<ffffffff810c70c3>] load_module+0xfa3/0x19c0
[<ffffffff812491f6>] ? security_file_permission+0x86/0x90
[<ffffffff810c7b3a>] sys_init_module+0x5a/0x220
[<ffffffff815ce339>] system_call_fastpath+0x16/0x1b
---[ end trace fd8f7704fdea0291 ]---
vmalloc: allocation failure, allocated 16384 of 20480 bytes
modprobe: page allocation failure: order:0, mode:0xd2
Since the __va and __ka are 1:1 up to MODULES_VADDR and
cleanup_highmap rids __ka of the ramdisk mapping, what
we want to do is similar - get rid of the P2M in the __ka
address space. There are two ways of fixing this:
1) All P2M lookups instead of using the __ka address would
use the __va address. This means we can safely erase from
__ka space the PMD pointers that point to the PFNs for
P2M array and be OK.
2). Allocate a new array, copy the existing P2M into it,
revector the P2M tree to use that, and return the old
P2M to the memory allocate. This has the advantage that
it sets the stage for using XEN_ELF_NOTE_INIT_P2M
feature. That feature allows us to set the exact virtual
address space we want for the P2M - and allows us to
boot as initial domain on large machines.
So we pick option 2).
This patch only lays the groundwork in the P2M code. The patch
that modifies the MMU is called "xen/mmu: Copy and revector the P2M tree."
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
As we are not using them. We end up only using the L1 pagetables
and grafting those to our page-tables.
[v1: Per Stefano's suggestion squashed two commits]
[v2: Per Stefano's suggestion simplified loop]
[v3: Fix smatch warnings]
[v4: Add more comments]
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
B/c we do not need it. During the startup the Xen provides
us with all the initial memory mapped that we need to function.
The initial memory mapped is up to the bootstack, which means
we can reference using __ka up to 4.f):
(from xen/interface/xen.h):
4. This the order of bootstrap elements in the initial virtual region:
a. relocated kernel image
b. initial ram disk [mod_start, mod_len]
c. list of allocated page frames [mfn_list, nr_pages]
d. start_info_t structure [register ESI (x86)]
e. bootstrap page tables [pt_base, CR3 (x86)]
f. bootstrap stack [register ESP (x86)]
(initial ram disk may be ommitted).
[v1: More comments in git commit]
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot,
at least over nfs, with:
Failed to mount /dev: No such device
Configuring DEVTMPFS fixes it.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
run make savedefconfig on fsl defconfigs.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
The PCI Express Capability (PCIe spec r3.0, sec 7.8) comes in two
versions, v1 and v2. In v1 Capability structures (PCIe spec r1.0 and
r1.1), some fields are optional, so the structure size depends on the
device type.
This patch adds functions to access this capability so drivers don't
have to be aware of the differences between v1 and v2. Note that these
new functions apply only to the "PCI Express Capability," not to any of
the other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.)
Function pcie_capability_read_word/dword() reads the PCIe Capabilities
register and returns the value in the reference parameter "val". If
the PCIe Capabilities register is not implemented on the PCIe device,
"val" is set to 0.
Function pcie_capability_write_word/dword() writes the value to the
specified PCIe Capability register.
Function pcie_capability_clear_and_set_word/dword() sets and/or clears bits
of a PCIe Capability register.
[bhelgaas: changelog, drop "pci_" prefixes, don't export
pcie_capability_reg_implemented()]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
With introduction of pci_pcie_type(), pci_dev->pcie_type field becomes
redundant, so remove it.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Introduce an inline function pci_pcie_type(dev) to extract PCIe
device type from pci_dev->pcie_flags_reg field, and prepare for
removing pci_dev->pcie_type.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Which is that the level2_kernel_pgt (__ka virtual addresses)
and level2_ident_pgt (__va virtual address) contain the same
PMD entries. So if you modify a PTE in __ka, it will be reflected
in __va (and vice-versa).
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We don't need to return the new PGD - as we do not use it.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This reverts commit 806c312e50 and
commit 59b294403e.
And also documents setup.c and why we want to do it that way, which
is that we tried to make the the memblock_reserve more selective so
that it would be clear what region is reserved. Sadly we ran
in the problem wherein on a 64-bit hypervisor with a 32-bit
initial domain, the pt_base has the cr3 value which is not
neccessarily where the pagetable starts! As Jan put it: "
Actually, the adjustment turns out to be correct: The page
tables for a 32-on-64 dom0 get allocated in the order "first L1",
"first L2", "first L3", so the offset to the page table base is
indeed 2. When reading xen/include/public/xen.h's comment
very strictly, this is not a violation (since there nothing is said
that the first thing in the page table space is pointed to by
pt_base; I admit that this seems to be implied though, namely
do I think that it is implied that the page table space is the
range [pt_base, pt_base + nt_pt_frames), whereas that
range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames),
which - without a priori knowledge - the kernel would have
difficulty to figure out)." - so lets just fall back to the
easy way and reserve the whole region.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Small platform specific bug fixes for problems found in randconfig builds.
* randconfig/mach:
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Using 'select' in Kconfig is hard, a platform cannot just
enable a driver without also making sure that its subsystem
is there. Also, there is no actual code dependency between
the platform and the gpio leds driver.
Without this patch, building without LEDS_CLASS esults in:
drivers/built-in.o: In function `create_gpio_led.part.2':
governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `gpio_led_remove':
governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister'
This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio
support for Snowball" that introduced the regression and did not
provide a helpful explanation.
In order to leave the GPIO LED code still present in normal
builds, this also enables the symbol in u8500_defconfig, in addition
to the other LED drivers that are already selected there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
The head-v7.S contains a call to the generic cpu_suspend function,
which is only available when selected by the i.MX6 code. As
pointed out by Shawn Guo, i.MX5 does not actually use any
functions defined in head-v7.S. It is also needed only for
the i.MX6 power management code and for the SMP code, so
we can restrict building this file to situations in which
at least one of those two is present.
Finally, other platforms with a similar file call it headsmp.S,
so we can rename it to the same for consistency.
Without this patch, building imx5 standalone results in:
arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume':
arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Miao <eric.miao@linaro.org>
Cc: stable@vger.kernel.org
If the kernel is compiled with gcc 4.6.0 which supports -mfentry,
then use that instead of mcount.
With mcount, frame pointers are forced with the -pg option and we
get something like:
<can_vma_merge_before>:
55 push %rbp
48 89 e5 mov %rsp,%rbp
53 push %rbx
41 51 push %r9
e8 fe 6a 39 00 callq ffffffff81483d00 <mcount>
31 c0 xor %eax,%eax
48 89 fb mov %rdi,%rbx
48 89 d7 mov %rdx,%rdi
48 33 73 30 xor 0x30(%rbx),%rsi
48 f7 c6 ff ff ff f7 test $0xfffffffff7ffffff,%rsi
With -mfentry, frame pointers are no longer forced and the call looks
like this:
<can_vma_merge_before>:
e8 33 af 37 00 callq ffffffff81461b40 <__fentry__>
53 push %rbx
48 89 fb mov %rdi,%rbx
31 c0 xor %eax,%eax
48 89 d7 mov %rdx,%rdi
41 51 push %r9
48 33 73 30 xor 0x30(%rbx),%rsi
48 f7 c6 ff ff ff f7 test $0xfffffffff7ffffff,%rsi
This adds the ftrace hook at the beginning of the function before a
frame is set up, and allows the function callbacks to be able to access
parameters. As kprobes now can use function tracing (at least on x86)
this speeds up the kprobe hooks that are at the beginning of the
function.
Link: http://lkml.kernel.org/r/20120807194100.130477900@goodmis.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With gcc 4.6.0 the -mfentry feature places the function profiling
call at the start of the function. When this is used, the call is
to __fentry__ and not mcount.
Change recordmcount.c to record both callers to __fentry__ and
mcount.
Link: http://lkml.kernel.org/r/20120807194058.990674363@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: John Reiser <jreiser@bitwagon.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.
Building IMX without CPU_FREQ_TABLE results in:
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Yong Shen <yong.shen@linaro.org>
Cc: stable@vger.kernel.org
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to
set up an ethernet phy if they can. They do check whether
phylib is enabled, but unfortunately the functions can only
be called from platform code if phylib is builtin, not
if it is a module
Without this patch, building with a modular phylib results in:
arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init':
arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function)
arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in
The bug was originally reported by Artem Bityutskiy but only
partially fixed in ef441806 "ARM: imx6q: register phy fixup only when
CONFIG_PHYLIB is enabled".
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
This moves the imx5 pm code out of the list of unconditionally
compiled files for imx5, mirroring what we already do for imx6
and how it was done before the code was move from mach-mx5 to
mach-imx in v3.3.
Without this patch, building with CONFIG_PM disabled results in:
arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here
arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
The new omap4 cpuidle implementation currently requires
ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP.
This patch makes it possible to build a non-SMP kernel
for that platform. This is not normally desired for
end-users but can be useful for testing.
Without this patch, building rand-0y2jSKT results in:
drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke':
drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration]
It's not clear if this patch is the best solution for
the problem at hand. I have made sure that we can now
build the kernel in all configurations, but that does
not mean it will actually work on an OMAP44xx.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
The WM0010 is a compact digital signal processor that has been
highly optimised for low-power audio applications. Extensive memory
resources and core optimisation allow the device to manage all audio
processing algorithms efficiently and autonomously, while the host
processor sleeps or performs other tasks.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=/h+C
-----END PGP SIGNATURE-----
Merge tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij <linus.walleij@linaro.org>:
Here are two audio fixes for the ux500 found by Lee Jones.
* tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From Kukjin Kim <kgene.kim@samsung.com>:
For HDMI, already HDMI support for EXYNOS in mainline kernel is broken
because its configuration moved to platform data but regarding platform
data didn't support yet. And others are for fix warnings.
* 'v3.6-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Set HDMI platform data in Origen board
ARM: EXYNOS: Set HDMI platform data in SMDKV310
ARM: SAMSUNG: Add API to set platform data for s5p-tv driver
ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs
ARM: Samsung: Make uart_save static in pm.c file
ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters
ARM: S3C24XX: Add missing DMACH_DT_PROP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
Also updates to Linux 3.6-rc2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some new WM1811 variants distinguished by both revision and
cust_id which need slightly different handling.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
There are many reports (including 2 of my machines) that iTCO_wdt watchdog
driver fails to be initialized in 3.5 kernel with error message like:
[ 5.265175] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPCB.TCOI 1 (20120320/utaddress-251)
[ 5.265192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.265206] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
The root cause the iTCO_wdt driver in 3.4 probes the HW IO resource from
LPC's PCI config space, while in 3.5 kernel it relies on lpc_ich driver
for the probe, which adds a new acpi_check_resource_conflict() check, and
give up the probe if there is any conflict with ACPI.
Fix it by removing all the checks for iTCO_wdt to keep the same behavior as
3.4 kernel.
https://bugzilla.kernel.org/show_bug.cgi?id=44991
Actually the same check could be removed for the gpio-ich in lpc_ich.c,
but I'm not sure if it will cause problems.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Aaron Sierra <asierra@xes-inc.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Len Brown <len.brown@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fixes:
CC arch/arm/mach-omap2/twl-common.o arch/arm/mach-omap2/twl-common.c:562: error: conflicting types for ‘omap_twl4030_audio_init’
arch/arm/mach-omap2/twl-common.h:62: error: previous declaration of ‘omap_twl4030_audio_init’ was here
make[1]: *** [arch/arm/mach-omap2/twl-common.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2
When building the kernel with !SND_OMAP_SOC_OMAP_TWL4030
Reported-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
As pevent_errno is defined using PEVENT_ERRORS which uses _PE macro
magic, the first errno is bigger than __PEVENT_ERRNO_START by 1. So we
need to subtract the 1 also when calculating the index of the error
strings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1345707420-21767-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer
arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Sparse warns us off:
drivers/xen/swiotlb-xen.c:506:1: warning: symbol 'xen_swiotlb_map_sg' was not declared. Should it be static?
drivers/xen/swiotlb-xen.c:534:1: warning: symbol 'xen_swiotlb_unmap_sg' was not declared. Should it be static?
and it looks like we do not need this function at all.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch removes the "return -ENOSYS" for auto_translated_physmap
guests from privcmd_mmap, thus it allows ARM guests to issue privcmd
mmap calls. However privcmd mmap calls are still going to fail for HVM
and hybrid guests on x86 because the xen_remap_domain_mfn_range
implementation is currently PV only.
Changes in v2:
- better commit message;
- return -EINVAL from xen_remap_domain_mfn_range if
auto_translated_physmap.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
All the original Xen headers have xen_pfn_t as mfn and pfn type, however
when they have been imported in Linux, xen_pfn_t has been replaced with
unsigned long. That might work for x86 and ia64 but it does not for arm.
Bring back xen_pfn_t and let each architecture define xen_pfn_t as they
see fit.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
irq_startup, that is responsible for calling irq_unmask at startup time.
As a result event channels remain masked.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When unmask_evtchn is called, if we already have an event pending, we
just set evtchn_pending_sel waiting for local_irq_enable to be called.
That is because PV guests set the irq_enable pvops to
xen_irq_enable_direct in xen_setup_vcpu_info_placement:
xen_irq_enable_direct is implemented in assembly in
arch/x86/xen/xen-asm.S and call xen_force_evtchn_callback if
XEN_vcpu_info_pending is set.
However HVM guests (and ARM guests) do not change or do not have the
irq_enable pvop, so evtchn_unmask cannot work properly for them.
Considering that having the pending_irq bit set when unmask_evtchn is
called is not very common, and it is simpler to keep the
native_irq_enable implementation for HVM guests (and ARM guests), the
best thing to do is just use the EVTCHNOP_unmask hypercall (Xen
re-injects pending events in response).
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This hypercall has been present since Xen 3.1, and is the preferred
method for a domain to obtain its UUID. Fall back to the xenstore method
if using an older version of Xen (which returns -ENOSYS).
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:
1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added
=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.
The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.
CC: stable@vger.kernel.org
Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If the controller has no PCIe module attached, accessing of the device
configuration space causes a data bus error. Avoid this by checking the
status of the PCIe link in advance, and indicate an error if the link
is down.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4293/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
SW reset sets DP TX to initial value, so configurations for analog parameter
and interrupt are not set properly. Therefore, exynos_dp_init_analog_param()
and exynos_dp_init_interrupt() should be moved to after sw reset is called,
in order to set these values properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
