Commit graph

335,609 commits

Author SHA1 Message Date
David S. Miller
fdd28d7328 Merge branch 'metrics_restructure'
This patch series works towards the goal of minimizing the amount
of things that can change in an ipv4 route.

In a regime where the routing cache is removed, route changes will
lead to cloning in the FIB tables or similar.

The largest trigger of route metrics writes, TCP, now has it's own
cache of dynamic metric state.  The timewait timestamps are stored
there now as well.

As a result of that, pre-cowing metrics is no longer necessary,
and therefore FLOWI_FLAG_PRECOW_METRICS is removed.

Redirect and PMTU handling is moved back into the ipv4 routes.  I'm
sorry for all the headaches trying to do this in the inetpeer has
caused, it was the wrong approach for sure.

Since metrics become read-only for ipv4 we no longer need the inetpeer
hung off of the ipv4 routes either.  So those disappear too.

Also, timewait sockets no longer need to hold onto an inetpeer either.

After this series, we still have some details to resolve wrt. PMTU and
redirects for a route-cache-less system:

1) With just the plain route cache removal, PMTU will continue to
   work mostly fine.  This is because of how the local route users
   call down into the PMTU update code with the route they already
   hold.

   However, if we wish to cache pre-computed routes in fib_info
   nexthops (which we want for performance), then we need to add
   route cloning for PMTU events.

2) Redirects require more work.  First, redirects must be changed to
   be handled like PMTU.  Wherein we call down into the sockets and
   other entities, and then they call back into the routing code with
   the route they were using.

   So we'll be adding an ->update_nexthop() method alongside
   ->update_pmtu().

   And then, like for PMTU, we'll need cloning support once we start
   caching routes in the fib_info nexthops.

But that's it, we can completely pull the trigger and remove the
routing cache with minimal disruptions.

As it is, this patch series alone helps a lot of things.  For one,
routing cache entry creation should be a lot faster, because we no
longer do inetpeer lookups (even to check if an entry exists).

This patch series also opens the door for non-DST_HOST ipv4 routes,
because nothing fundamentally cares about rt->rt_dst any more.  It
can be removed with the base routing cache removal patch.  In fact,
that was the primary goal of this patch series.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:53:57 -07:00
David S. Miller
f185071ddf ipv4: Remove inetpeer from routes.
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:18 -07:00
David S. Miller
312487313d ipv4: Calling ->cow_metrics() now is a bug.
Nothing every writes to ipv4 metrics any longer.

PMTU is stored in rt->rt_pmtu.

Dynamic TCP metrics are stored in a special TCP metrics cache,
completely outside of the routes.

Therefore ->cow_metrics() can simply nothing more than a WARN_ON
trigger so we can catch anyone who tries to add new writes to
ipv4 route metrics.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:17 -07:00
David S. Miller
2db2d67e4c ipv4: Kill dst_copy_metrics() call from ipv4_blackhole_route().
Blackhole routes have a COW metrics operation that returns NULL
always, therefore this dst_copy_metrics() call did absolutely
nothing.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:16 -07:00
David S. Miller
710ab6c031 ipv4: Enforce max MTU metric at route insertion time.
Rather than at every struct rtable creation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:15 -07:00
David S. Miller
5943634fc5 ipv4: Maintain redirect and PMTU info in struct rtable again.
Maintaining this in the inetpeer entries was not the right way to do
this at all.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:14 -07:00
David S. Miller
87a50699cb rtnetlink: Remove ts/tsage args to rtnl_put_cacheinfo().
Nobody provides non-zero values any longer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:13 -07:00
David S. Miller
3e12939a2a inet: Kill FLOWI_FLAG_PRECOW_METRICS.
No longer needed.  TCP writes metrics, but now in it's own special
cache that does not dirty the route metrics.  Therefore there is no
longer any reason to pre-cow metrics in this way.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:12 -07:00
David S. Miller
1d861aa4b3 inet: Minimize use of cached route inetpeer.
Only use it in the absolutely required cases:

1) COW'ing metrics

2) ipv4 PMTU

3) ipv4 redirects

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:11 -07:00
David S. Miller
16d1839907 inet: Remove ->get_peer() method.
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:10 -07:00
David S. Miller
b6242b9b45 tcp: Remove tw->tw_peer
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:09 -07:00
David S. Miller
81166dd6fa tcp: Move timestamps from inetpeer to metrics cache.
With help from Lin Ming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:08 -07:00
David S. Miller
94334d5ed4 net: Kill set_dst_metric_rtt().
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:07 -07:00
David S. Miller
794785bf12 net: Don't report route RTT metric value in cache dumps.
We don't maintain it dynamically any longer, so reporting it would
be extremely misleading.  Report zero instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:06 -07:00
David S. Miller
51c5d0c4b1 tcp: Maintain dynamic metrics in local cache.
Maintain a local hash table of TCP dynamic metrics blobs.

Computed TCP metrics are no longer maintained in the route metrics.

The table uses RCU and an extremely simple hash so that it has low
latency and low overhead.  A simple hash is legitimate because we only
make metrics blobs for fully established connections.

Some tweaking of the default hash table sizes, metric timeouts, and
the hash chain length limit certainly could use some tweaking.  But
the basic design seems sound.

With help from Eric Dumazet and Joe Perches.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:39:57 -07:00
Dong Aisheng
475d009429 of: Improve prom_update_property() function
prom_update_property() currently fails if the property doesn't
actually exist yet which isn't what we want. Change to add-or-update
instead of update-only, then we can remove a lot duplicated lines.

Suggested-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 15:26:51 +10:00
Tiejun Chen
b416c9a10b powerpc: Add "memory" attribute for mfmsr()
Add "memory" attribute in inline assembly language as a compiler
barrier to make sure 4.6.x GCC don't reorder mfmsr().

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@vger.kernel.org
2012-07-11 15:25:45 +10:00
roger blofeld
fd5a42980e powerpc/ftrace: Fix assembly trampoline register usage
Just like the module loader, ftrace needs to be updated to use r12
instead of r11 with newer gcc's.

Signed-off-by: Roger Blofeld <blofeldus@yahoo.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@vger.kernel.org
2012-07-11 14:23:32 +10:00
Naveen N. Rao
ac84aa2b3b powerpc/hw_breakpoints: Fix incorrect pointer access
If arch_validate_hwbkpt_settings() fails, bp->ctx won't be valid and the
kernel panics. Add a check to fix this.

Reported-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:20:20 +10:00
Stephen Rothwell
1d5a436d2c powerpc: Put the gpr save/restore functions in their own section
This allows the linker to know that calls to them do not need to switch
TOC and stop errors like the following when linking large configurations:

powerpc64-linux-ld: drivers/built-in.o: In function `.gpiochip_is_requested':
(.text+0x4): sibling call optimization to `_savegpr0_29' does not allow automatic multiple TOCs; recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `_savegpr0_29' extern

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:19:59 +10:00
Anton Blanchard
18ad51dd34 powerpc: Add VDSO version of getcpu
We have a request for a fast method of getting CPU and NUMA node IDs
from userspace. This patch implements a getcpu VDSO function,
similar to x86.

Ben suggested we use SPRG3 which is userspace readable. SPRG3 can be
modified by a KVM guest, so we save the SPRG3 value in the paca and
restore it when transitioning from the guest to the host.

I have a glibc patch that implements sched_getcpu on top of this.
Testing on a POWER7:

baseline: 538 cycles
vdso:      30 cycles

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:18:40 +10:00
Michael Ellerman
e6a74c6ea3 powerpc: Add a symbol for hypervisor trampolines
Purely for cosmetic purposes, otherwise it can appear that we are in
single_step_pSeries() which is slightly confusing.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:18:38 +10:00
Deepthi Dharwar
852d8cb1ff powerpc/cpuidle: Fixes for pseries_idle hotplug notifier
Currently the call to pseries_notify_cpuidle_add_cpu(), that takes
action on the cpuidle front when a cpu is added/removed
is being made from smp_xics_setup_cpu().
This caused lockdep issues as
reported https://lkml.org/lkml/2012/5/17/2

On addition of each cpu,
resources were cleared and re-allocated each time, all in critical
section as part of start_secondary() call were interrupts are disabled.
To resolve this issue, the pseries_notify_cpuidle_add_cpu() call is
is being replaced by a hotplug notifier which
would prevent cpuidle resources from being
released and allocated each time cpu is onlined in the critical code path.
It was fixed in https://lkml.org/lkml/2012/5/18/174.

Also it is essential to call cpuidle_enable/disable_device
between  cpuidle_pause_and_lock()  and
cpuidle_resume_and_unlock()  when used externally
to avoid race conditions. Add support for CPU_ONLINE_FROZEN
and CPU_DEAD_FROZEN as part of hotplug notify event for
pseries_idle  and unregister hotplug notifier
while exiting out. The above mentioned issues
are fixed as part of this patch.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:18:35 +10:00
Benjamin Herrenschmidt
8bf8385b9c powerpc: Fixup oddity in entry_32.S
When I "fixed" the CONFIG_TRACE_IRQFLAGS case on interrupt entry,
I screwed up a little bit with the test for user space vs. kernel.

The code is fine, there's just some dead code around it. I basically
removed the test and always create the added stack frame whether
coming from user or kernel since in any case we do need to save
a bunch of volatile registers or bad things would happen (we can
take page faults in the kernel for example).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:18:33 +10:00
Stuart Yoder
9778b696a0 powerpc: Use CURRENT_THREAD_INFO instead of open coded assembly
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 14:18:22 +10:00
Lauri Hintsala
1ad0ceacb4 ARM: apx4devkit: add pin muxing for GPIOs
Some pins are used as GPIOs in user space.

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:33 +08:00
Lauri Hintsala
78771f05c8 ARM: apx4devkit: remove AUART3
AUART3 is not available anymore. Pins are used as GPIOs.

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:28 +08:00
Lauri Hintsala
557763b31c ARM: apx4devkit: add SSP2 support
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:22 +08:00
Lauri Hintsala
1eb73ca0b5 ARM: apx4devkit: fix the bus-width of SSP0 to 4 bits
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:16 +08:00
Lauri Hintsala
d8bb823d31 ARM: apx4devkit: add display support
Add HannStar display and device tree configuration.

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:10 +08:00
Lauri Hintsala
3317d99e44 ARM: apx4devkit: add NAND support
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 12:17:01 +08:00
Shawn Guo
841730e743 ARM: mxs: add dtb-y target into Makefile.boot
Add dtb-y target into Makefile.boot, so that "make ARCH=arm dtbs" can
build out all the dtbs listed there.  It's very useful for build-testing
all the <board>.dts when imx28.dtsi changes.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:50:13 +08:00
Shawn Guo
dd852aa521 ARM: mxs: convert stmp378x_devb board to device tree
The enc28j60 spi device does not get converted to dts file, because
there is no mxs spi driver on mainline so far.  The enc28j60 spi
in mach-stmp378x_devb.c does not work anyway.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:50:06 +08:00
Shawn Guo
e1a4d18f6c ARM: mxs: convert tx28 board to device tree
FEC support is missing because we need to find a proper way to rewrite
tx28_add_fec0 for device tree boot.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:49:59 +08:00
Shawn Guo
3143bbb42b ARM: mxs: convert apx4devkit board to device tree
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:49:50 +08:00
Marek Vasut
8fa62e1128 ARM: mxs: convert m28evk board to device tree
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:49:41 +08:00
Shawn Guo
3dba259673 ARM: dts: imx28: move lcdif control pins into board dts
The presence and muxing of lcdif control pins can vary much on different
boards.  Move them into imx28-evk.dts to make lcdif_24bit_pins_a only
about data pins, so that it can be reused by other boards.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:49:34 +08:00
Shawn Guo
daefb6961c ARM: dts: imx28: move extra gpmi-nand pins into board dts
Only pins GPMI_CE0N and GPMI_READY0 are generally used by other boards.
Move GPMI_CE1N and GPMI_READY1 into imx28-evk.dts to make gpmi_pins_a
more general, and can be used by other boards.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11 11:49:28 +08:00
David S. Miller
ab92bb2f67 tcp: Abstract back handling peer aliveness test into helper function.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 20:33:49 -07:00
David S. Miller
4aabd8ef8c tcp: Move dynamnic metrics handling into seperate file.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 20:31:36 -07:00
Johannes Goetzfried
a43478863b crypto: twofish-avx - remove useless instruction
The register %rdx is written, but never read till the end of the encryption
routine. Therefore let's delete the useless instruction.

Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:30 +08:00
Horia Geanta
e46e9a4638 crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors
Test vectors were generated starting from existing CBC(AES) test vectors
(RFC3602, NIST SP800-38A) and adding HMAC(SHA*) computed with Crypto++ and
double-checked with HashCalc.

Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:30 +08:00
Horia Geanta
357fb60502 crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms
With this, now all combinations of
CBC: AES, 3DES-EDE
with
HMAC: SHA-1, SHA-224, SHA-256, SHA-384, SHA-512
are supported.

Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:29 +08:00
Horia Geanta
865d506155 crypto: talitos - export the talitos_submit function
This patch exports the talitos_submit function so that on
need basis same can be used by other entities.

Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:29 +08:00
Horia Geanta
d1a0eb98e7 crypto: talitos - move talitos structures to header file
This patch moves the talitos structure definitions from c file to its
header file so that the same can be shared on need basis.

Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:29 +08:00
Nicolas Royer
de19753348 crypto: atmel - add new tests to tcrypt
- set sg buffers size equals to message size
- add cfb & ofb tests for AES, DES & TDES

Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:28 +08:00
Nicolas Royer
ebc82efa1c crypto: atmel - add Atmel SHA1/SHA256 driver
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:28 +08:00
Nicolas Royer
13802005d8 crypto: atmel - add Atmel DES/TDES driver
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:08:14 +08:00
Nicolas Royer
bd3c7b5c2a crypto: atmel - add Atmel AES driver
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:07:40 +08:00
Nicolas Royer
815e972110 ARM: AT91SAM9G45: add crypto peripherals
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:06:16 +08:00