Commit graph

335,609 commits

Author SHA1 Message Date
Ido Reis
f5755fe96c wl18xx: PG2.0 HW Watch dog interrupt support
In PG2, the HW watchdog interrupt occupies bit0 of the event vector, and
the SW watchdog is relocated to bit9. We perform the relocation
globally, as there's only one watchdog bit on previous platforms (bit0).

[Only mask in the new bit9 for platforms supporting it. This avoids
spurious events on other platforms - Arik]

Signed-off-by: Orit Brayer <orit@ti.com>
Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-07 18:11:01 +03:00
Ido Reis
16ea473321 wl18xx: FW/PHY arguments added for PG2
PG2 requires 4 new parameters that to be passed to the PHY.

Use the actual PHY initialization struct size for the mem size of the
PHY_INIT section, to account for additions in params.

[Make sure PG1 still gets the original struct - Arik]

Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-07 18:10:57 +03:00
Ido Reis
73395a79df wl18xx: support PG2 version of the chip
PG2 has a unique chip id. It supports similar HW quirks.

Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-07 18:10:52 +03:00
Ido Reis
4085f641e7 wl18xx: fix PHY_INIT addresses mem size
was hardcoded 252, now uses the parameters struct size.

Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-07 18:10:48 +03:00
Steven Rostedt
7fbb98c5cb x86: Save cr2 in NMI in case NMIs take a page fault
Avi Kivity reported that page faults in NMIs could cause havic if
the NMI preempted another page fault handler:

   The recent changes to NMI allow exceptions to take place in NMI
   handlers, but I think that a #PF (say, due to access to vmalloc space)
   is still problematic.  Consider the sequence

    #PF  (cr2 set by processor)
      NMI
        ...
        #PF (cr2 clobbered)
          do_page_fault()
          IRET
        ...
        IRET
      do_page_fault()
        address = read_cr2()

   The last line reads the overwritten cr2 value.

Originally I wrote a patch to solve this by saving the cr2 on the stack.
Brian Gerst suggested to save it in the r12 register as both r12 and rbx
are saved by the do_nmi handler as required by the C standard. But rbx
is already used for saving if swapgs needs to be run on exit of the NMI
handler.

Link: http://lkml.kernel.org/r/4FBB8C40.6080304@redhat.com
Link: http://lkml.kernel.org/r/1337763411.13348.140.camel@gandalf.stny.rr.com

Reported-by: Avi Kivity <avi@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-07 10:21:21 -04:00
Trond Myklebust
f07936f2c4 NFS: Remove incorrect BUG_ON in nfs_found_client
It is perfectly valid for nfs_get_client() to return a nfs_client that
is in the process of setting up the NFSv4.1 session.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-07 10:21:03 -04:00
Shawn Guo
602bf40971 ARM: imx6: exit coherency when shutting down a cpu
There is a system hang issue on imx6q which can easily be seen with
running a cpu hotplug stress testing (hotplug secondary cores from
user space via sysfs interface for thousands iterations).

It turns out that the issue is caused by coherency of the cpu that
is being shut down.  When shutting down a cpu, we need to have the
cpu exit coherency to prevent it from receiving cache, TLB, or BTB
maintenance operations broadcast by other CPUs in the cluster.

Copy cpu_enter_lowpower() and cpu_leave_lowpower() from mach-vexpress
to have coherency properly handled in platform_cpu_die(), thus fix
the issue.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable@kernel.org
2012-06-07 21:47:32 +08:00
Fabio Estevam
eb5558dd46 ARM: mx51: Add pinctrl_provide_dummies()
commit a2aa65a (ARM: imx: enable pinctrl dummy states) missed to add
pinctrl_provide_dummies() for mx51.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-07 21:47:24 +08:00
Fabio Estevam
aa29cab3f1 ARM: mx31: Add pinctrl_provide_dummies()
commit a2aa65a (ARM: imx: enable pinctrl dummy states) missed to add
pinctrl_provide_dummies() for mx31.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-07 21:47:16 +08:00
Xi Wang
a550604950 libceph: fix overflow in osdmap_apply_incremental()
On 32-bit systems, a large `pglen' would overflow `pglen*sizeof(u32)'
and bypass the check ceph_decode_need(p, end, pglen*sizeof(u32), bad).
It would also overflow the subsequent kmalloc() size, leading to
out-of-bounds write.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-07 08:28:16 -05:00
Xi Wang
e91a9b639a libceph: fix overflow in osdmap_decode()
On 32-bit systems, a large `n' would overflow `n * sizeof(u32)' and bypass
the check ceph_decode_need(p, end, n * sizeof(u32), bad).  It would also
overflow the subsequent kmalloc() size, leading to out-of-bounds write.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-07 08:28:10 -05:00
Xi Wang
ad3b904c07 libceph: fix overflow in __decode_pool_names()
`len' is read from network and thus needs validation.  Otherwise a
large `len' would cause out-of-bounds access via the memcpy() call.
In addition, len = 0xffffffff would overflow the kmalloc() size,
leading to out-of-bounds write.

This patch adds a check of `len' via ceph_decode_need().  Also use
kstrndup rather than kmalloc/memcpy.

[elder@inktank.com: added -ENOMEM return for null kstrndup() result]

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-07 08:28:04 -05:00
Yan, Zheng
43643528cc rbd: Clear ceph_msg->bio_iter for retransmitted message
The bug can cause NULL pointer dereference in write_partial_msg_pages

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-07 08:27:33 -05:00
Alban Crequy
2597a8344c netfilter: selinux: switch hook PFs to nfproto
This patch is a cleanup. Use NFPROTO_* for consistency with other
netfilter code.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:43 +02:00
Alban Crequy
4c809d630c netfilter: ipvs: switch hook PFs to nfproto
This patch is a cleanup. Use NFPROTO_* for consistency with other
netfilter code.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:43 +02:00
Alban Crequy
89a48e35f5 netfilter: ipv4, defrag: switch hook PFs to nfproto
This patch is a cleanup. Use NFPROTO_* for consistency with other
netfilter code.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
2012-06-07 14:58:42 +02:00
Alban Crequy
aa740f46fb netfilter: bridge: switch hook PFs to nfproto
This patch is a cleanup. Use NFPROTO_* for consistency with other
netfilter code.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:42 +02:00
Alban Crequy
3d33bf2bd8 netfilter: decnet: switch hook PFs to nfproto
This patch is a cleanup. Use NFPROTO_* for consistency with other
netfilter code.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:42 +02:00
Denys Fedoryshchenko
efdedd5426 netfilter: xt_recent: add address masking option
The mask option allows you put all address belonging that mask into
the same recent slot. This can be useful in case that recent is used
to detect attacks from the same network segment.

Tested for backward compatibility.

Signed-off-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:42 +02:00
Florian Westphal
1da6dd0798 netfilter: NFQUEUE: don't xor src/dst ip address for load distribution
because reply packets need to go to the same nfqueue, src/dst ip
address were xor'd prior to jhash().

However, this causes bad distribution for some workloads, e.g.
flows a.b.1.{1,n} -> a.b.2.{1,n} all share the same hash value.

Avoid this by hashing both. To get same hash for replies,
first argument is the smaller address.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:42 +02:00
Gao feng
8264deb818 netfilter: nf_conntrack: add namespace support for cttimeout
This patch adds namespace support for cttimeout.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:41 +02:00
Pablo Neira Ayuso
e76d0af5e4 netfilter: nf_conntrack: remove now unused sysctl for nf_conntrack_l[3|4]proto
Since the sysctl data for l[3|4]proto now resides in pernet nf_proto_net.
We can now remove this unused fields from struct nf_contrack_l[3,4]proto.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:41 +02:00
Gao feng
4f71d80fc0 netfilter: nf_ct_gre: use new namespace support
This patch modifies the GRE protocol tracker, which partially
supported namespace before this patch, to use the new namespace
infrastructure for nf_conntrack.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:41 +02:00
Gao feng
84c394511f netfilter: nf_ct_dccp: use new namespace support
This patch modifies the DCCP protocol tracker to use the new
namespace infrastructure for nf_conntrack.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:41 +02:00
Gao feng
a8021fedda netfilter: nf_ct_udplite: add namespace support
This patch adds namespace support for UDPlite protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:41 +02:00
Gao feng
49d485a30f netfilter: nf_ct_sctp: add namespace support
This patch adds namespace support for SCTP protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
a7c439d396 netfilter: nf_ct_ipv6: add namespace support
This patch adds namespace support for IPv6 protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
3ea04dd3a7 netfilter: nf_ct_ipv4: add namespace support
This patch adds namespace support for IPv4 protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
7080ba0955 netfilter: nf_ct_icmp: add namespace support
This patch adds namespace support for ICMPv6 protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
4b626b9c5d netfilter: nf_ct_icmp: add namespace support
This patch adds namespace support for ICMP protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
0ce490ad43 netfilter: nf_ct_udp: add namespace support
This patch adds namespace support for UDP protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:40 +02:00
Gao feng
d2ba1fde42 netfilter: nf_ct_tcp: add namespace support
This patch adds namespace support for TCP protocol tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:39 +02:00
Gao feng
15f585bd76 netfilter: nf_ct_generic: add namespace support
This patch adds namespace support for the generic layer 4 protocol
tracker.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:39 +02:00
Gao feng
524a53e5ad netfilter: nf_conntrack: prepare namespace support for l3 protocol trackers
This patch prepares the namespace support for layer 3 protocol trackers.
Basically, this modifies the following interfaces:

* nf_ct_l3proto_[un]register_sysctl.
* nf_conntrack_l3proto_[un]register.

We add a new nf_ct_l3proto_net is used to get the pernet data of l3proto.

This adds rhe new struct nf_ip_net that is used to store the sysctl header
and l3proto_ipv4,l4proto_tcp(6),l4proto_udp(6),l4proto_icmp(v6) because the
protos such tcp and tcp6 use the same data,so making nf_ip_net as a field
of netns_ct is the easiest way to manager it.

This patch also adds init_net to struct nf_conntrack_l3proto to initial
the layer 3 protocol pernet data.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:39 +02:00
Gao feng
2c352f444c netfilter: nf_conntrack: prepare namespace support for l4 protocol trackers
This patch prepares the namespace support for layer 4 protocol trackers.
Basically, this modifies the following interfaces:

* nf_ct_[un]register_sysctl
* nf_conntrack_l4proto_[un]register

to include the namespace parameter. We still use init_net in this patch
to prepare the ground for follow-up patches for each layer 4 protocol
tracker.

We add a new net_id field to struct nf_conntrack_l4proto that is used
to store the pernet_operations id for each layer 4 protocol tracker.

Note that AF_INET6's protocols do not need to do sysctl compat. Thus,
we only register compat sysctl when l4proto.l3proto != AF_INET6.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:39 +02:00
Krishna Kumar
fdb694a01f netfilter: Add fail-open support
Implement a new "fail-open" mode where packets are not dropped
upon queue-full condition. This mode can be enabled/disabled per
queue using netlink NFQA_CFG_FLAGS & NFQA_CFG_MASK attributes.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Vivek Kashyap <vivk@us.ibm.com>
Signed-off-by: Sridhar Samudrala <samudrala@us.ibm.com>
2012-06-07 14:58:39 +02:00
Cong Wang
68c07cb6d8 netfilter: xt_connlimit: remove revision 0
It was scheduled to be removed.

Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:39 +02:00
Cong Wang
7a74c1a18d netfilter: remove include/linux/netfilter_ipv4/ipt_addrtype.h
It was scheduled to be removed.

Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:58:38 +02:00
Pablo Neira Ayuso
d109e9af61 netfilter: nf_ct_h323: fix bug in rtcp natting
The nat_rtp_rtcp hook takes two separate parameters port and rtp_port.

port is expected to be the real h245 address (found inside the packet).
rtp_port is the even number closest to port (RTP ports are even and
RTCP ports are odd).

However currently, both port and rtp_port are having same value (both are
rounded to nearest even numbers).

This works well in case of openlogicalchannel with media (RTP/even) port.

But in case of openlogicalchannel for media control (RTCP/odd) port,
h245 address in the packet is wrongly modified to have an even port.

I am attaching a pcap demonstrating the problem, for any further analysis.

This behavior was introduced around v2.6.19 while rewriting the helper.

Signed-off-by: Jagdish Motwani <jagdish.motwani@elitecore.com>
Signed-off-by: Sanket Shah <sanket.shah@elitecore.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:53:17 +02:00
Hans Schillstrom
d1992b169d netfilter: xt_HMARK: fix endianness and provide consistent hashing
This patch addresses two issues:

a) Fix usage of u32 and __be32 that causes endianess warnings via sparse.
b) Ensure consistent hashing in a cluster that is composed of big and
   little endian systems. Thus, we obtain the same hash mark in an
   heterogeneous cluster.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-07 14:53:01 +02:00
Steven Whitehouse
df5d2f5560 GFS2: Increase buffer size for glocks and glstats debugfs files
As per Al Viro's suggestion, this increases the buffer size used
for these two files. This provides a speed up of slightly less than
8x (i.e. proportional to the buffer size) for cases when we have
large numbers of glocks.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-07 13:30:16 +01:00
Artem Bityutskiy
12027f1b3f UBI: correct ubi_wl_flush locking
Commit "62f38455 UBI: modify ubi_wl_flush function to clear work queue for a lnum"
takes the 'work_sem' semaphore in write mode for the entire loop, which is not
very good because it will block other workers for potentially long time. We do
not need to have it in write mode - read mode is enough, and we do not need to
hole it over the entire loop. So this patch turns changes the locking: takes
'work_sem' in read mode and pushes it down to the loop.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-07 15:22:21 +03:00
Borislav Petkov
1112257019 x86, MCE, AMD: Update copyrights and boilerplate
Jacob is doing something else now so add myself as the loser who
provides support.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:50 +02:00
Borislav Petkov
336d335a96 x86, MCE, AMD: Give proper names to the thresholding banks
Having the banks numbered is ok but having real names which mean
something to the user makes a lot more sense:

 /sys/devices/system/machinecheck/machinecheck0/
 |-- bank0
 |-- bank1
 |-- bank2
 |-- bank3
 |-- bank4
 |-- bank5
 |-- bank6
 |-- check_interval
 |-- cmci_disabled
 |-- combined_unit
 |   |-- combined_unit
 |       |-- error_count
 |       |-- threshold_limit
 |-- dont_log_ce
 |-- execution_unit
 |   |-- execution_unit
 |       |-- error_count
 |       |-- threshold_limit
 |-- ignore_ce
 |-- insn_fetch
 |   |-- insn_fetch
 |       |-- error_count
 |       |-- threshold_limit
 |-- load_store
 |   |-- load_store
 |       |-- error_count
 |       |-- threshold_limit
 |-- monarch_timeout
 |-- northbridge
 |   |-- dram
 |   |   |-- error_count
 |   |   |-- interrupt_enable
 |   |   |-- threshold_limit
 |   |-- ht_links
 |   |   |-- error_count
 |   |   |-- interrupt_enable
 |   |   |-- threshold_limit
 |   |-- l3_cache
 |       |-- error_count
 |       |-- interrupt_enable
 |       |-- threshold_limit
...

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:48 +02:00
Borislav Petkov
6e927361bd x86, MCE, AMD: Make error_count read only
Until now, writing to error count caused the code to reset the
thresholding bank to the current thresholding limit and start counting
errors from the beginning.

This is misleading and unclear, and can be accomplished by writing the
old thresholding limit into ->threshold_limit.

Make error_count read-only with the functionality to show the current
error count.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:47 +02:00
Borislav Petkov
2c9c42fa98 x86, MCE, AMD: Cleanup reading of error_count
We have rdmsr_on_cpu() now so remove locally defined solution in favor
of the generic one.

No functionality change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:46 +02:00
Borislav Petkov
18c20f373b x86, MCE, AMD: Print decimal thresholding values
If one sets the threshold limit, say to 25:

$ echo 25 > machinecheck0/threshold_bank4/misc0/threshold_limit

and then reads it back again, it gives

$ cat machinecheck0/threshold_bank4/misc0/threshold_limit
19

which is actually 0x19 but we don't know that.

Make all output decimal.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:45 +02:00
Borislav Petkov
019f34fccf x86, MCE, AMD: Move shared bank to node descriptor
Well, instead of having a real bank 4 on the BSP of each node and
symlinks on the remaining cores, we push it up into the amd_northbridge
descriptor which now contains a pointer to the northbridge bank 4
because the bank is one per northbridge and, as such, belongs in the NB
descriptor anyway.

Each time we hotplug CPUs, we use the northbridge pointer to copy the
shared bank into the per-CPU array of threshold_banks pointers, or
destroy it when the last CPU on the node goes offline, or create it when
the first comes online.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:44 +02:00
Borislav Petkov
26ab256eaa x86, MCE, AMD: Remove local_allocate_... wrapper
It is unneeded now so drop it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:43 +02:00
Borislav Petkov
92e26e2a1a x86, MCE, AMD: Remove shared banks sysfs linking
The code used to create a symlink on all non-BSP cores of a node when
the MCi_MISCj bank is present once per node. (This is generally the
case with bank 4 on AMD). However, these sysfs links cause a bunch
of problems with cpu off-/onlining testing and are, as such, a bit
overengineered. IOW, there's nothing wrong with having normal sysfs
files for the shared banks since the corresponding MSRs are replicated
across each core anyway.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-07 12:43:42 +02:00