If the DTS contains 'assigned-address', a dynamic address leak occurs
during hotjoin events.
Assume a device have assigned-address 0xb.
- Device issue Hotjoin
- Call i3c_master_do_daa()
- Call driver xxx_do_daa()
- Call i3c_master_get_free_addr() to get dynamic address 0x9
- i3c_master_add_i3c_dev_locked(0x9)
- expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb);
- i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9));
- if (dev->info.dyn_addr != old_dyn_addr &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE
(!dev->boardinfo ||
^^^^^^^^^^^^^^^ -> FALSE
dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0xb != 0xb -> FALSE
...
i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr,
I3C_ADDR_SLOT_FREE);
^^^
This will be skipped. So old_dyn_addr never free
}
- i3c_master_get_free_addr() will return increased sequence number.
Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check.
dev->info.dyn_addr should be checked before calling this function because
i3c_master_setnewda_locked() has already been called and the target device
has already accepted dyn_addr. It is too late to check if dyn_addr is free
in i3c_master_reattach_i3c_dev().
Add check to ensure expected_dyn_addr is free before
i3c_master_setnewda_locked().
Fixes: cc3a392d69 ("i3c: master: fix for SETDASA and DAA process")
Cc: stable@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Extend the address status bit to 4 and introduce the
I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a
specific address. This is generally set by the 'assigned-address' in the
device tree source (dts) file.
┌────┬─────────────┬───┬─────────┬───┐
│S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐
└────┴─────────────┴───┴─────────┴───┘ │
┌─────────────────────────────────────────┘
│ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐
└─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│
└──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘
Some master controllers (such as HCI) need to prepare the entire above
transaction before sending it out to the I3C bus. This means that a 7-bit
dynamic address needs to be allocated before knowing the target device's
UID information.
However, some I3C targets may request specific addresses (called as
"init_dyn_addr"), which is typically specified by the DT-'s
assigned-address property. Lower addresses having higher IBI priority. If
it is available, i3c_bus_get_free_addr() preferably return a free address
that is not in the list of desired addresses (called as "init_dyn_addr").
This allows the device with the "init_dyn_addr" to switch to its
"init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the
"init_dyn_addr" is already in use by another I3C device, the target device
will not be able to switch to its desired address.
If the previous step fails, fallback returning one of the remaining
unassigned address, regardless of its state in the desired list.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-2-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace the hardcoded value 2, which indicates 2 bits for I3C address
status, with the predefined macro I3C_ADDR_SLOT_STATUS_BITS.
Improve maintainability and extensibility of the code.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-1-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=3oi9
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi, bluetooth and netfilter.
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not
supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of
bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in
.get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware"
* tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
net: hns3: don't auto enable misc vector
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
net: hns3: fix missing features due to dev->features configuration too early
net: hns3: fixed reset failure issues caused by the incorrect reset type
net: hns3: add sync command to sync io-pgtable
net: hns3: default enable tx bounce buffer when smmu enabled
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
selftests: forwarding: Add IPv6 GRE remote change tests
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
mlxsw: pci: Sync Rx buffers for device
mlxsw: pci: Sync Rx buffers for CPU
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
...
The KX022A provides the accelerometer data in two subsequent registers.
The registers are laid out so that the value obtained via bulk-read of
these registers can be interpreted as signed 16-bit little endian value.
The read value is converted to cpu_endianes and stored into 32bit integer.
The le16_to_cpu() casts value to unsigned 16-bit value, and when this is
assigned to 32-bit integer the resulting value will always be positive.
This has not been a problem to users (at least not all users) of the sysfs
interface, who know the data format based on the scan info and who have
converted the read value back to 16-bit signed value. This isn't
compliant with the ABI however.
This, however, will be a problem for those who use the in-kernel
interfaces, especially the iio_read_channel_processed_scale().
The iio_read_channel_processed_scale() performs multiplications to the
returned (always positive) raw value, which will cause strange results
when the data from the sensor has been negative.
Fix the read_raw format by casting the result of the le_to_cpu() to
signed 16-bit value before assigning it to the integer. This will make
the negative readings to be correctly reported as negative.
This fix will be visible to users by changing values returned via sysfs
to appear in correct (negative) format.
Reported-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 7c1d1677b3 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Kalle Niemi <kaleposti@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/ZyIxm_zamZfIGrnB@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In iio_gts_build_avail_time_table(), it is checked that gts->num_itime is
non-zero, but gts->num_itime is not checked in gain_to_scaletables(). The
variable time_idx is initialized as gts->num_itime - 1. This implies that
time_idx might initially be set to -1 (0 - 1 = -1). Consequently, using
while (time_idx--) could lead to an infinite loop.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014626.2313077-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Initialize the variable ret at the time of declaration to prevent it from
being returned without a defined value. Fixes smatch warning:
drivers/iio/industrialio-gts-helper.c:256 gain_to_scaletables() error:
uninitialized symbol 'ret'.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014505.2313035-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix reading unsigned data from the AD4000 ADC via the _raw sysfs
attribute by ensuring that *val is set before returning from
ad4000_single_conversion(). This was not being set in any code path
and was causing the attribute to return a random value.
Fixes: 938fd562b9 ("iio: adc: Add support for AD4000")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241030-iio-adc-ad4000-fix-reading-unsigned-data-v1-1-2e28dd75fe29@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.
Fixes: 9085daa4ab ("staging: iio: ad7780: add gain & filter gpio support")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7923 was updated to support devices with 8 channels, but the size
of tx_buf and ring_xfer was not increased accordingly, leading to a
potential buffer overflow in ad7923_update_scan_mode().
Fixes: 851644a60d ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For historical reasons a lot of symbols in the MSM DisplayPort driver
used the generic dp_ prefix. Perform a mass-rename of those symbols to
use msm_dp prefix.
Basically this is a result of the following script:
sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g'
Yes, this also results in renaming of several struct fields in addition
to renaming the structs and functions, but I think the simple solution
is better than the more complex one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622211/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
From LNL onwards there is a new hardware feature, which
allows to detect if the driver wrongly allocated DBuf
entries and they happen to overlap. If enabled this will
cause a specific interrupt to occur.
We now handle it in the driver, by writing correspondent
error message to kernel log.
v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula)
v3: Unmask the overlap detection interrupt (Uma)
v4: use display over i915 (Jani Nikula)
v5: Use display instead of dev_priv (Jani Nikula)
v6: rebased to resolve merge conflicts
Bspec: 69450, 69464
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
Start reprogramming PMU events at nested boundaries now that everything
is in place to handle the EL2 event filter. Only repaint events where
the filter differs between EL1 and EL2 as a slight optimization.
PMU now 'works' for nested VMs, albeit slow.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182559.3364829-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It hopefully comes as no surprise when I say that vEL2 actually runs at
EL1. So, the guest hypervisor's EL2 event filter (NSH) needs to actually
be applied to EL1 in the perf event. In addition to this, the disable
bit for the guest counter range (HPMD) needs to have the effect of
stopping the affected counters.
Do exactly that by stuffing ::exclude_kernel with the combined effect of
these controls. This isn't quite enough yet, as the backing perf events
need to be reprogrammed upon nested ERET/exception entry to remap the
effective filter onto ::exclude_kernel.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-18-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Counters that fall in the hypervisor range (i.e. N >= HPMN) have a
separate control for enabling 64 bit overflow. Take it into account.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-17-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Checking the exception level filters for a PMC is a minor annoyance to
open code. Add helpers to check if an event counts at EL0 and EL1, which
will prove useful in a subsequent change.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The value of MDCR_EL2.HPMN controls the number of event counters made
visible to EL0 and EL1. This means it is possible for the guest
hypervisor to allow direct access to event counters to the L2.
Rework KVM's PMU register emulation to take the effects of HPMN into
account when handling a trap. For bitmask-style registers, writes only
affect accessible registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Nested PMU support requires dynamically changing the visible range of
PMU counters based on the exception level and value of MDCR_EL2.HPMN. At
the same time, the PMU emulation code needs to know the absolute number
of implemented counters, regardless of context.
Rename the existing helper to make it obvious that it returns the number
of implemented counters and not anything else.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Everything is in place now for KVM to actually handle MDCR_EL2.HPMN. Not
only that, the emulation is capable of doing FEAT_HPMN0. Advertise
support for the feature in the VM's ID registers. It is possible to
emulate FEAT_HPMN0 on hardware that doesn't support it since KVM
currently traps all PMU registers. Having said that, let's only
advertise the feature on supporting hardware in case KVM ever provides
'direct' PMU support to VMs w/o involving host perf.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
MDCR_EL2.HPMN splits the PMU event counters into two ranges: the first
range is accessible from all ELs, and the second range is accessible
only to EL2/3. Supposing the guest hypervisor allows direct access to
the PMU counters from the L2, KVM needs to locally handle those
accesses.
Add a new complex trap configuration for HPMN that checks if the counter
index is accessible to the current context. As written, the architecture
suggests HPMN only causes PMEVCNTR<n>_EL0 to trap, though intuition (and
the pseudocode) suggest that the trap applies to PMEVTYPER<n>_EL0 as
well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
TPM and TPMCR trap bits also affect Host EL0. How fun.
Mark these two trap bits as such and take advantage of the new
infrastructure for dealing w/ EL0 traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Wire up the other end of traps that affect host EL0 by actually
injecting them into the guest hypervisor. Skip over FGT entirely, as a
cursory glance suggests no FGT is effective in host EL0.
Note that kvm_inject_nested() is already equipped for handling
exceptions while the VM is already in a host context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
BEHAVE_FORWARD_ANY is slightly ambiguous, especially since we're about
to cram some more information into the enum. Rephrase it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM uses a sanity-check to avoid infinite recursion in trap combinations
that could potentially depend on itself. Narrow the scope of this sanity
check to the exact CGT IDs that correspond w/ trap combos, opening the
door to using 'complex' traps as part of a combination.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As this spi host controller driver implements the
.transfer_one_message() callback, it has to care about these traces
it-self. With the transfers being compiled it's difficult to determine
where handling of one transfer ends and the next begins, so just
generate the start events in batch before the hardware fifo is fed and
the end events when their completion triggered.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241031111646.747692-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle the initialization of trap registers at the hypervisor in
pKVM, even for non-protected guests. The host is not trusted with
the values of the trap registers, regardless of the VM type.
Therefore, when switching between the host and the guests, only
flush the HCR_EL2 TWI and TWE bits. The host is allowed to
configure these for opportunistic scheduling, as neither affects
the protection of VMs or the hypervisor.
Reported-by: Will Deacon <will@kernel.org>
Fixes: 814ad8f96e ("KVM: arm64: Drop trapping of PAuth instructions/keys")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Do not trust the state of the VM as provided by the host when
initializing the hypervisor's view of the VM sate. Initialize it
instead at EL2 to a known good and safe state, as pKVM already
does with hypervisor VCPU states.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-4-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Move kvm_vcpu_enable_ptrauth() to a shared header to be used by
hypervisor code in protected mode.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-3-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Move pkvm_vcpu_init_traps() to the initialization of the
hypervisor's vcpu state in init_pkvm_hyp_vcpu(), and remove the
associated hypercall.
In protected mode, traps need to be initialized whenever a VCPU
is initialized anyway, and not only for protected VMs. This also
saves an unnecessary hypercall.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes. The only core change is the
workaround for __counted_by() usage in ASoC DAPM code, while the rest
are device-specific fixes for Intel Baytrail devices, Cirrus and
wcd937x codecs, and HD-audio / USB-audio devices.
-----BEGIN PGP SIGNATURE-----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=5pCP
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes.
The only core change is the workaround for __counted_by() usage in
ASoC DAPM code, while the rest are device-specific fixes for Intel
Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio
devices"
* tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1
ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3
ALSA: usb-audio: Add quirks for Dell WD19 dock
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: dt-bindings: rockchip,rk3308-codec: add port property
ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
ASoC: Intel: sst: Fix used of uninitialized ctx to log an error
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()
ASoC: Intel: sst: Support LPE0F28 ACPI HID
ALSA: hda/realtek: Limit internal Mic boost on Dell platform
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec
ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f61 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ID_AA64PFR0.MPAM bit was previously accidentally exposed to guests,
and is ignored by KVM. KVM will always present the guest with 0 here,
and trap the MPAM system registers to inject an undef.
But, this value is still needed to prevent migration when the value
is incompatible with the target hardware. Add a kvm unit test to try
and write multiple values to ID_AA64PFR0.MPAM. Only the hardware value
previously exposed should be ignored, all other values should be
rejected.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-8-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
commit 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The sys_reg_descs array holds function pointers and reset value for
managing the user-space and guest view of system registers. These
are mostly created by a set of macro's as only some combinations
of behaviour are needed.
If a register needs special treatment, its sys_reg_descs entry is
open-coded. This is true of some id registers where the value provided
by user-space is validated by some helpers.
Before adding another one of these, add a helper that covers the
existing special cases. 'ID_FILTERED' expects helpers to set the
user-space value, and retrieve the modified reset value.
Like ID_WRITABLE() this uses id_visibility(), which should have no
functional change for the registers converted to use ID_FILTERED().
read_sanitised_id_aa64dfr0_el1() and read_sanitised_id_aa64pfr0_el1()
have been refactored to be called from kvm_read_sanitised_id_reg(), to
try be consistent with ID_WRITABLE().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-6-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
commit 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling.
If you are unlucky, this results in an MPAM aware guest being delivered
an undef during boot. The host prints:
| kvm [97]: Unsupported guest sys_reg access at: ffff800080024c64 [00000005]
| { Op0( 3), Op1( 0), CRn(10), CRm( 5), Op2( 0), func_read },
Which results in:
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc7-00559-gd89c186d50b2 #14616
| Hardware name: linux,dummy-virt (DT)
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_has_mpam+0x18/0x30
| lr : test_has_mpam+0x10/0x30
| sp : ffff80008000bd90
...
| Call trace:
| test_has_mpam+0x18/0x30
| update_cpu_capabilities+0x7c/0x11c
| setup_cpu_features+0x14/0xd8
| smp_cpus_done+0x24/0xb8
| smp_init+0x7c/0x8c
| kernel_init_freeable+0xf8/0x280
| kernel_init+0x24/0x1e0
| ret_from_fork+0x10/0x20
| Code: 910003fd 97ffffde 72001c00 54000080 (d538a500)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Add the support to enable the traps, and handle the three guest accessible
registers by injecting an UNDEF. This stops KVM from spamming the host
log, but doesn't yet hide the feature from the id registers.
With MPAM v1.0 we can trap the MPAMIDR_EL1 register only if
ARM64_HAS_MPAM_HCR, with v1.1 an additional MPAM2_EL2.TIDR bit traps
MPAMIDR_EL1 on platforms that don't have MPAMHCR_EL2. Enable one of
these if either is supported. If neither is supported, the guest can
discover that the CPU has MPAM support, and how many PARTID etc the
host has ... but it can't influence anything, so its harmless.
Fixes: 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register")
CC: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200925160102.118858-1-james.morse@arm.com/
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-5-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
ARMv8.4 adds support for 'Memory Partitioning And Monitoring' (MPAM)
which describes an interface to cache and bandwidth controls wherever
they appear in the system.
Add support to detect MPAM. Like SVE, MPAM has an extra id register that
describes some more properties, including the virtualisation support,
which is optional. Detect this separately so we can detect
mismatched/insane systems, but still use MPAM on the host even if the
virtualisation support is missing.
MPAM needs enabling at the highest implemented exception level, otherwise
the register accesses trap. The 'enabled' flag is accessible to lower
exception levels, but its in a register that traps when MPAM isn't enabled.
The cpufeature 'matches' hook is extended to test this on one of the
CPUs, so that firmware can emulate MPAM as disabled if it is reserved
for use by secure world.
Secondary CPUs that appear late could trip cpufeature's 'lower safe'
behaviour after the MPAM properties have been advertised to user-space.
Add a verify call to ensure late secondaries match the existing CPUs.
(If you have a boot failure that bisects here its likely your CPUs
advertise MPAM in the id registers, but firmware failed to either enable
or MPAM, or emulate the trap as if it were disabled)
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-4-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
