Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://lore.kernel.org/r/20241023085429.2865488-1-lijiayi@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for DT time properties to allow users to define platform
specific timing deadlines of certain timers rather than using hardcoded
ones. For values that have not been explicitly defined in DT using this
property, default values will be set therefore, making this change
backward compatible.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241022-pd-dt-time-props-v1-2-fea96f51b302@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds the following properties:
* sink-wait-cap-time-ms
* ps-source-off-time-ms
* cc-debounce-time-ms
This is to enable setting of platform/board specific timer values as
these timers have a range of acceptable values.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241022-pd-dt-time-props-v1-1-fea96f51b302@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current logic is rigid, setting num_fifos to fixed values.
3 for any maxburst greater than 1.
tx_fifo_resize_max_num for maxburst greater than 6.
Additionally, it did not differentiate much between bulk and
isochronous transfers, applying similar logic to both.
The updated logic is more flexible and specifically designed to meet
the unique requirements of both bulk and isochronous transfers. We
have made every effort to satisfy all needs and requirements, verified
on our specific platform and application.
Bulk Transfers: Ensures that num_fifos is optimized by considering both
the maxburst and DT property "tx-fifo-max-num" for super speed and
above. For high-speed and below bulk endpoints, a 2K TxFIFO allocation
is used to meet efficient data transfer needs, considering
FIFO-constrained platforms.
Isochronous Transfers: Ensures that num_fifos is sufficient by
considering the maximum packet multiplier for HS and below and maxburst
for Super-speed and above eps, along with a constraint with the DT
property "tx-fifo-max-num".
This change aims to optimize the allocation of Tx FIFOs for both bulk
and isochronous endpoints, potentially improving data transfer efficiency
and overall performance. It also enhances support for all use cases,
which can be tweaked with DT parameters and the endpoint’s maxburst and
maxpacket. This structured approach ensures that the appropriate number
of FIFOs is allocated based on the endpoint type and USB speed.
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241017064423.7056-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That command is executed from several locations in the
driver, so providing a dedicated helper function for it.
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241017091112.1178509-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the __free() macro for 'altmodes_node' to automatically release the
node when it goes out of scope, removing the need for explicit calls to
fwnode_handle_put().
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241021-typec-class-fwnode_handle_put-v2-2-3281225d3d27@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'altmodes_node' fwnode_handle is never released after it is no
longer required, which leaks the resource.
Add the required call to fwnode_handle_put() when 'altmodes_node' is no
longer required.
Cc: stable@vger.kernel.org
Fixes: 7b458a4c5d ("usb: typec: Add typec_port_register_altmodes()")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241021-typec-class-fwnode_handle_put-v2-1-3281225d3d27@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If drm_dp_hpd_bridge_register() fails, the probe function returns
without removing the fwnode via fwnode_handle_put(), leaking the
resource.
Jump to fwnode_remove if drm_dp_hpd_bridge_register() fails to remove
the fwnode acquired with device_get_named_child_node().
Cc: stable@vger.kernel.org
Fixes: 7d9f1b72b2 ("usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241020-qcom_pmic_typec-fwnode_remove-v2-2-7054f3d2e215@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The right function to release a fwnode acquired via
device_get_named_child_node() is fwnode_handle_put(), and not
fwnode_remove_software_node(), as no software node is being handled.
Replace the calls to fwnode_remove_software_node() with
fwnode_handle_put() in qcom_pmic_typec_probe() and
qcom_pmic_typec_remove().
Cc: stable@vger.kernel.org
Fixes: a4422ff221 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241020-qcom_pmic_typec-fwnode_remove-v2-1-7054f3d2e215@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend FW and driver handling on RFK to support it on both HW bands.
Then, according to MLO cases, do the corresponding RF settings.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241022083106.149252-6-pkshih@realtek.com
Setting of channel and TX power depend on channel contexts, but original
code cannot handle combination of MCC (multi-channel concurrency) and MLO
well. So according to active interfaces, we generate a table for current
channel contexts. And then based on entity mode, we get the corresponding
channel context to apply during channel or TX power setting. When MLO is
supported, there will be dual-PHY and we will apply the channel context of
the 2nd link to the 2nd PHY.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241022083106.149252-5-pkshih@realtek.com
Fix a boot hang issue triggered when a USB3 device is incorrectly assumed
to be tunneled over USB4, thus attempting to create a device link between
the USB3 "consumer" device and the USB4 "supplier" Host Interface before
the USB4 side is properly bound to a driver.
This could happen if xhci isn't capable of detecting tunneled devices,
but ACPI tables contain all info needed to assume device is tunneled.
i.e. udev->tunnel_mode == USB_LINK_UNKNOWN.
It turns out that even for actual tunneled USB3 devices it can't be
assumed that the thunderbolt driver providing the tunnel is loaded
before the tunneled USB3 device is created.
The tunnel can be created by BIOS and remain in use by thunderbolt/USB4
host driver once it loads.
Solve this by making the device link "stateless", which doesn't create
a driver presence order dependency between the supplier and consumer
drivers.
It still guarantees correct suspend/resume and shutdown ordering.
cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: f1bfb4a6fe ("usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface")
Tested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241024131355.3836538-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To set channel well for combination of MCC (multi-channel concurrency) and
impending MLO support, we need a method to manage relation between active
interfaces and channel contexts. If an interface owns at least one active
link, we call it an active interface. We add a list to manage active ones.
Basically, the list follows the active order except for the below case. To
be compatible with legacy behavior, the first interface that owns the first
channel context will put at the first entry in the list when recalculating.
Besides, MCC can also select and fill roles based on the above active list.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241022083106.149252-4-pkshih@realtek.com
In order to make encryption/decryption work properly with MLO
connections, MLD address needs to be filled in so circuits can
operate with the correct information.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241022083106.149252-3-pkshih@realtek.com
The commit d483f034f0 ("usb: dwc2: Skip clock gating on Broadcom SoCs")
introduced a regression on Raspberry Pi 3 B Plus, which prevents
enumeration of the onboard Microchip LAN7800 in case no external USB device
is connected during boot.
Fixes: d483f034f0 ("usb: dwc2: Skip clock gating on Broadcom SoCs")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241025103621.4780-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the aborting of a command, the software receives a command
completion event for the command ring stopped, with the TRB pointing
to the next TRB after the aborted command.
If the command we abort is located just before the Link TRB in the
command ring, then during the 'command ring stopped' completion event,
the xHC gives the Link TRB in the event's cmd DMA, which causes a
mismatch in handling command completion event.
To address this situation, move the 'command ring stopped' completion
event check slightly earlier, since the specific command it stopped
on isn't of significant concern.
Fixes: 7f84eef0da ("USB: xhci: No-op command queueing and irq handler.")
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241022155631.1185-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pm_runtime_put in the remove function and pm_runtime_get to disable
RPM on platforms that don't support runtime D3, as re-enabling it through
sysfs auto power control may cause the controller to malfunction. This
can lead to issues such as hotplug devices not being detected due to
failed interrupt generation.
Fixes: a5d6264b63 ("xhci: Enable RPM on controllers that support low-power states")
Cc: stable <stable@kernel.org>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241024133718.723846-1-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For MLO connections, this setting replaces 802.11 header addresses
to according link addresses based on each packet's destination.
The fields most likely to be replaced would be both A1 and A2.
For legacy connections, it's the same with or without the conversion.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241022083106.149252-2-pkshih@realtek.com
Running "make kselftest TARGETS=intel_pstate" results in the
following errors:
- ./run.sh: line 89: cpupower: command not found
- ./run.sh: line 91: cpupower: command not found
if the cpupower is not installed.
Since the test depends on cpupower, this patch stops the test if the
cpupower is not installed.
Link: https://lore.kernel.org/all/cc01753c8dab0f33669a5a0fc162544078055bd1.1730141362.git.alessandro.zanni87@gmail.com/
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Running "make kselftest TARGETS=intel_pstate" results in
the following errors:
- ./run.sh: line 90: / 1000: syntax error: operand expected
(error token is "/ 1000")
- ./run.sh: line 92: / 1000: syntax error: operand expected
(error token is "/ 1000")
This fix allows to have cross-platform compatibility when
using arithmetic expression with command substitutions.
Link: https://lore.kernel.org/r/f37df23888cd5ea6b3976f19d3e25796129dd090.1730141362.git.alessandro.zanni87@gmail.com
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A small change in peci-npcm driver to mark peci_controller_ops as const.
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEVeIYQcCloMPRsCC93RgStozwYHYFAmcbZNEaHGl3b25hLndp
bmlhcnNrYUBpbnRlbC5jb20ACgkQ3RgStozwYHa2oRAAiPZH534wM9AQGsU4N/93
WmP4D/WlIdkL3ggsAY96lmmR195ADBFCdiNn8Z4oSwVcSFj0GNomm7FmQmJ//GaR
hIJh0ENNEI1IeLzB/jkBS/ROPKfZYYCTcHA5l9Up3Mp3G4mtg/RgRaKOIPiSfary
pBie7SWswy7eRDZZGAQD6rEAm4xd2f94f4Ryjzr6WyceyUuKl68QodvarWtOvgbS
GZXtNMKKaJBJSBGPhsM3YMsvpMkgl6kXuP8miFofdKqGpzoDRHjZDLloP85Z3SBC
8PKmbklRcaWUXvsisunbTFXwNbrcHqgs9lXzVlnLNUA2b6l4aIPm+1XMJwccmN9S
bm4Jv51bafNTs73l1mbM3CeM5zNHMCysP0FEuJXuTPTyJcPLomnWU7YYbvc3vH9R
QoUbLNFmkn35y7L2Gm1RCJXAjibsTYuzVPlJmkFhii4hUq0DaC8URSCXYqD/TpHj
hUAwgpspA4mSHysWbl/hYK/1uZUbEQt+qD3CyEzf2s45tBJFyI+F/yN0NOPTt6fJ
tLgiOQQXkGMA0Y0K4RbDk4CpktSpprDCdh/iiIOtCyme3ys66uQDdH6b0T4drltw
lOku8GsEdJa84GOSKHW3cScpGrUWx62/RHB3o3z6SPD+8N79ofogcck5+bhN+ZQk
11OP60p4ODEiV2TDS/VZcrg=
=MAQ3
-----END PGP SIGNATURE-----
Merge tag 'peci-next-6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-next
Iwona writes:
Update peci-next for v6.13-rc1
A small change in peci-npcm driver to mark peci_controller_ops as const.
* tag 'peci-next-6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iwi/linux:
peci: npcm: Constify struct peci_controller_ops
Test case idmap_mount_tree_invalid failed to run on the newer kernel
with the following output:
# RUN mount_setattr_idmapped.idmap_mount_tree_invalid ...
# mount_setattr_test.c:1428:idmap_mount_tree_invalid:Expected sys_mount_setattr(open_tree_fd, "", AT_EMPTY_PATH, &attr, sizeof(attr)) (0) ! = 0 (0)
# idmap_mount_tree_invalid: Test terminated by assertion
This is because tmpfs is mounted at "/mnt/A", and tmpfs already
contains the flag FS_ALLOW_IDMAP after the commit 7a80e5b8c6 ("shmem:
support idmapped mounts for tmpfs"). So calling sys_mount_setattr here
returns 0 instead of -EINVAL as expected.
Ramfs does not support idmap mounts, so we can use it here to test invalid mounts,
which allows the test case to pass with the following output:
# Starting 1 tests from 1 test cases.
# RUN mount_setattr_idmapped.idmap_mount_tree_invalid ...
# OK mount_setattr_idmapped.idmap_mount_tree_invalid
ok 1 mount_setattr_idmapped.idmap_mount_tree_invalid
# PASSED: 1 / 1 tests passed.
Link: https://lore.kernel.org/all/20241028084132.3212598-1-zhouyuhang1010@163.com/
Signed-off-by: zhouyuhang <zhouyuhang@kylinos.cn>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This includes following USB4/Thunderbolt fixes for v6.12-rc5:
- Fix KASAN reported stack out-of-bounds read
- Honor Time Management Unit (TMU) requirements in the domain when
configuring TMU mode of a newly plugged router.
Both have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmcbK7IgHG1pa2Eud2Vz
dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKCz+BAAgid8LtaemRXt
pIcCvvxrn4q9yoUnaAHo1qiTiXfWCnCdp+8IEEjkqba2E0/SUe4mrLQj3LAWN13Q
88b6o4oRj1vAMujuHmRzNG4yty1nZeEHw9xXoBZEstjiUmt1YsrTQGZ/etdZoTyF
YtV3yX91jk16DG682i22PUNwy5OXTgmvvI/IlYFUa86ob6Bt2+EJoj53+Foa0p7U
2DEvmyC48HVrJ/8dQXJs/xSdW5nE8j0z40g7I5Hz0QiT92QFCxPXtEbZq63SEqlD
yX0IgApKqPoCGI25TBa9pkgEANHKHH6akMCL5lYb0ejkclXIDj5jLJasLIScAlJ+
Rk2JMO5Yi3tlrE3nkVIxmfEIN1CPIZFO9JxrMap0TroOAeAc7aUuyJZ5/pk2g9kp
e8n/ySh0MuaJAI8ydMn3/PzXP7NW5slXyYUMBL0ZMFucNQGrBSj3bZyp1Xv8zOtj
kO6ZkH1Tr+1FM3ECCIgvMe22sLm8TZki/atnHW96BOCV+IOfgMCTjTOEDZhBOHiR
o3mPIhpSJQBrP/SbWAXbpDV5qimCN27mCLASm19BDf99TAC+OizKIoYrcdxLRTBh
tyJCGcYEMXohimACP4P/bMPNadjyzOCWUDYjlsIDWkXzdrhPRdP6KsXef53Z/1m2
o9TSZOAvcC2fQ84NnystB2Q7eoCmm+Y=
=QBZT
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.12-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.12-rc5
This includes following USB4/Thunderbolt fixes for v6.12-rc5:
- Fix KASAN reported stack out-of-bounds read
- Honor Time Management Unit (TMU) requirements in the domain when
configuring TMU mode of a newly plugged router.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
Usual mixed back of fixes for ancient bugs and some more recently
introduced problems.
gts-helper module
- Memory leak fixes for this library code to handle complex gain cases.
adi,ad7124
- Fix a divide by zero that can be triggered from userspace.
adi,ad7380
- Various supply fixes. Includes some minor rework that simplifies the
fix though increases the apparent scale of the change.
adi,ad9832
- Avoid a potential divide by zero if clk_get_rate() returns 0.
adi,ltc2642
- Fix wrong Kconfig regmap dependency.
vishay,veml6030
- Fix a scaling problem with decimal part of processed channel.
Note that only the illuminance channel is fixed as a larger series
of cleanups not suitable for this point in the rc cycle removes
the intensity channel anyway.
-----BEGIN PGP SIGNATURE-----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=RFc+
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: Fixes for 6.12, set 2
Usual mixed back of fixes for ancient bugs and some more recently
introduced problems.
gts-helper module
- Memory leak fixes for this library code to handle complex gain cases.
adi,ad7124
- Fix a divide by zero that can be triggered from userspace.
adi,ad7380
- Various supply fixes. Includes some minor rework that simplifies the
fix though increases the apparent scale of the change.
adi,ad9832
- Avoid a potential divide by zero if clk_get_rate() returns 0.
adi,ltc2642
- Fix wrong Kconfig regmap dependency.
vishay,veml6030
- Fix a scaling problem with decimal part of processed channel.
Note that only the illuminance channel is fixed as a larger series
of cleanups not suitable for this point in the rc cycle removes
the intensity channel anyway.
* tag 'iio-fixes-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
Read buffer is allocated according to max message size, reported by
the firmware and may reach 64K in systems with pxp client.
Contiguous 64k allocation may fail under memory pressure.
Read buffer is used as in-driver message storage and not required
to be contiguous.
Use kvmalloc to allow kernel to allocate non-contiguous memory.
Fixes: 3030dc0564 ("mei: add wrapper for queuing control commands.")
Cc: stable <stable@kernel.org>
Reported-by: Rohit Agarwal <rohiagar@chromium.org>
Closes: https://lore.kernel.org/all/20240813084542.2921300-1-rohiagar@chromium.org/
Tested-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tomas Winkler <tomasw@gmail.com>
Link: https://lore.kernel.org/r/20241015123157.2337026-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following race condition could trigger a NULL pointer dereference:
sock_map_link_detach(): sock_map_link_update_prog():
mutex_lock(&sockmap_mutex);
...
sockmap_link->map = NULL;
mutex_unlock(&sockmap_mutex);
mutex_lock(&sockmap_mutex);
...
sock_map_prog_link_lookup(sockmap_link->map);
mutex_unlock(&sockmap_mutex);
<continue>
Fix it by adding a NULL pointer check. In this specific case, it makes
no sense to update a link which is being released.
Reported-by: Ruan Bonan <bonan.ruan@u.nus.edu>
Fixes: 699c23f02c ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20241026185522.338562-1-xiyou.wangcong@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
mm layer is providing convenient functions, we do not have
to work around old limitations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241022150059.1345406-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_MSG_PHY_NTF description is missing in the ethtool netlink spec.
Add it to the spec.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241022151418.875424-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the device name to the per device kmem_cache names to
ensure their uniqueness. This fixes warnings like this:
"kmem_cache of name 'mlx5_fs_fgs' already exists".
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241023134146.28448-1-sebott@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 15fffc6a56.
This commit causes a regression, so revert it for now until it can come
back in a way that works for everyone.
Link: https://lore.kernel.org/all/172790598832.1168608.4519484276671503678.stgit@dwillia2-xfh.jf.intel.com/
Fixes: 15fffc6a56 ("driver core: Fix uevent_show() vs driver detach race")
Cc: stable <stable@kernel.org>
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was found by a static analyzer.
There may be a potential integer overflow issue in
sg2042_pll_recalc_rate(). numerator is defined as u64 while
parent_rate is defined as unsigned long and ctrl_table.fbdiv
is defined as unsigned int. On 32-bit machine, the result of
the calculation will be limited to "u32" without correct casting.
Integer overflow may occur on high-performance systems.
Fixes: 48cf7e0138 ("clk: sophgo: Add SG2042 clock driver")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20241023145146.13130-1-zichenxie0106@gmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled.
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Fixes: 80e698e2df ("ASoC: soc-dapm: Annotate struct snd_soc_dapm_widget_list with __counted_by")
Link: https://patch.msgid.link/20241028-soc-dapm-bounds-checker-fix-v1-1-262b0394e89e@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for another Lenovo Mini dock 0x17EF:0x3098 to the
r8152 driver. The device has been tested on NixOS, hotplugging and sleep
included.
Signed-off-by: Benjamin Große <ste3ls@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241020174128.160898-1-ste3ls@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 0a28bfd497 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20241021100309.234125-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add document about which modes have native XDP support.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241021031211.814-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bonding only supports native XDP for specific modes, which can lead to
confusion for users regarding why XDP loads successfully at times and
fails at others. This patch enhances error handling by returning detailed
error messages, providing users with clearer insights into the specific
reasons for the failure when loading native XDP.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241021031211.814-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).
For some compatible, it is both at the same time. eqc_early_init()
initialises early PLLs and exposes its own clock provider. It marks
other clocks as deferred. eqc_probe() adds all remaining clocks using
another clock provider.
It exposes read-only PLLs derived from the main crystal on board.
It also exposes another type of clocks: divider clocks.
They always have even divisors and have one PLL as parent.
This driver also bears the responsability for optional reset and pinctrl
auxiliary devices. The match data attached to the devicetree node
compatible indicate if such devices should be created. They all get
passed a pointer to the start of the OLB region.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Matthieu Baerts says:
====================
mptcp: various small improvements
The following patches are not related to each other.
- Patch 1: Avoid sending advertisements on stale subflows, reducing
risks on loosing them.
- Patch 2: Annotate data-races around subflow->fully_established, using
READ/WRITE_ONCE().
- Patch 3: A small clean-up on the PM side, avoiding a bit of duplicated
code.
- Patch 4: Use "Middlebox interference" MP_TCPRST code in reaction to a
packet received without MPTCP options in the middle of a connection.
====================
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-0-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC8684 suggests use of "Middlebox interference (code 0x06)" in case of
fully established subflow that carries data at TCP level with no DSS
sub-option.
This is generally the case when mpext is NULL or mpext->use_map is 0:
use a dedicated value of 'mapping_status' and use it before closing the
socket in subflow_check_data_avail().
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/518
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-4-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP path manager event handler mptcp_pm_connection_closed
interface has been added in the commit 1b1c7a0ef7 ("mptcp: Add path
manager interface") but it was an empty function from then on.
With such name, it sounds good to invoke mptcp_event with the
MPTCP_EVENT_CLOSED event type from it. It also removes a bit of
duplicated code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-3-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the subflow is considered as "staled", it is better to avoid it to
send an ACK carrying an ADD_ADDR or RM_ADDR. Another subflow, if any,
will then be selected.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-1-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the BCM_SYSPORT_IO_MACRO() definition and its use to bcmsysport.h
where it is more appropriate and where static inline helpers are
acceptable. While at it, make sure that the macro 'offset' argument does
not trigger a checkpatch warning due to possible argument re-use.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021174935.57658-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
