The jaguar has an hdmi output port, which is connected
to the hdmi0 controller of the rk3588.
Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20241024151403.1748554-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Haikou baseboard has an hdmi output port, which is connected
via the Q7 connector to the hdmi0 controller of the rk3588.
Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20241024151403.1748554-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Tiger SoM routes all relevant HDMI pins to its Q7 connector.
Some from the M0 and some from the M1 set of pins.
Add the necessary pinctrl entry to the hdmi controller for the SoM.
Not all baseboards may use all pins, but even for them it'll serve
documentation purposes.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20241024151403.1748554-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cpuhp state name given to cpuhp_setup_state() is "fgraph_idle_init"
which doesn't really conform to the names that are used for cpu hotplug
setups. Instead rename it to "fgraph:online" to be in line with other
states.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20241024222944.473d88c5@rorschach.local.home
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 2c02f7375e ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
We need to call mutex_unlock() on this error path.
Fixes: aad0394e7a ("wifi: rtw89: tweak driver architecture for impending MLO support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8683a712-ffc2-466b-8382-0b264719f8ef@stanley.mountain
Use guard(mutex)() to acquire and automatically release ftrace_lock,
fixing the issue of not unlocking when calling cpuhp_setup_state()
fails.
Fixes smatch warning:
kernel/trace/fgraph.c:1317 register_ftrace_graph() warn: inconsistent returns '&ftrace_lock'.
Link: https://lore.kernel.org/20241024155917.1019580-1-lihuafei1@huawei.com
Fixes: 2c02f7375e ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410220121.wxg0olfd-lkp@intel.com/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There might be some racing between BT and WiFi after scan. Since
one of the TX related register will be modified by both FW and
rtw89_set_channel() in driver, which could cause Tx fail. Reorder
the calling sequence to only notify coexistence mechanism after
rtw89_set_channel() is called, so that there are no concurrent
operations.
Fixes: 5f499ce69b ("wifi: rtw89: pause/proceed MCC for ROC and HW scan")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241021063219.22613-1-pkshih@realtek.com
The priority table should be changed according to what the in using
Bluetooth application is. To avoid Bluetooth audio + HID (mouse) will
trigger the lag experience, update the priority table.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241019063131.9462-1-pkshih@realtek.com
This is one of three drivers that trigger -Wenum-compare-conditional warnings
with clang:
drivers/net/wireless/realtek/rtw89/core.c:1806:14: error: conditional expression between different enumeration types ('enum nl80211_eht_gi' and 'enum nl80211_he_gi') [-Werror,-Wenum-compare-conditional]
1806 | return eht ? NL80211_RATE_INFO_EHT_GI_0_8 :
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1807 | NL80211_RATE_INFO_HE_GI_0_8;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/core.c:1810:14: error: conditional expression between different enumeration types ('enum nl80211_eht_gi' and 'enum nl80211_he_gi') [-Werror,-Wenum-compare-conditional]
1810 | return eht ? NL80211_RATE_INFO_EHT_GI_1_6 :
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1811 | NL80211_RATE_INFO_HE_GI_1_6;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/core.c:1813:14: error: conditional expression between different enumeration types ('enum nl80211_eht_gi' and 'enum nl80211_he_gi') [-Werror,-Wenum-compare-conditional]
1813 | return eht ? NL80211_RATE_INFO_EHT_GI_3_2 :
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1814 | NL80211_RATE_INFO_HE_GI_3_2;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/core.c:1818:15: error: conditional expression between different enumeration types ('enum nl80211_eht_gi' and 'enum nl80211_he_gi') [-Werror,-Wenum-compare-conditional]
1818 | return eht ? NL80211_RATE_INFO_EHT_GI_3_2 :
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1819 | NL80211_RATE_INFO_HE_GI_3_2;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this case, all four warnings can be easily avoided by splitting the
function into two separate ones, in a way that helps readability as well,
at the expense of a few extra source lines.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241018152311.4023979-1-arnd@kernel.org
The previous implementation included an unnecessary else
condition paired with a continue statement. Since a check
is already performed to determine if the band is either
2G or 5G, the else condition will never be triggered.
We can remove this check.
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241017080638.13074-1-pvmohammedanees2003@gmail.com
The driver neglects to free the instance of I2C regmap constructed at
the beginning of the edt_ft5x06_ts_probe() method when probe fails.
Additionally edt_ft5x06_ts_remove() is freeing the regmap too early,
before the rest of the device resources that are managed by devm are
released.
Fix this by installing a custom devm action that will ensure that the
regmap is released at the right time during normal teardown as well as
in case of probe failure.
Note that devm_regmap_init_i2c() could not be used because the driver
may replace the original regmap with a regmap specific for M06 devices
in the middle of the probe, and using devm_regmap_init_i2c() would
result in releasing the M06 regmap too early.
Reported-by: Li Zetao <lizetao1@huawei.com>
Fixes: 9dfd9708ff ("Input: edt-ft5x06 - convert to use regmap API")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/ZxL6rIlVlgsAu-Jv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix the following compilation warnings:
drivers/input/touchscreen/imagis.c:422:39: warning: ‘imagis_3038c_data’
defined but not used [-Wunused-const-variable=]
422 | static const struct imagis_properties imagis_3038c_data = {
drivers/input/touchscreen/imagis.c:415:39: warning: ‘imagis_3038b_data’
defined but not used [-Wunused-const-variable=]
415 | static const struct imagis_properties imagis_3038b_data = {
drivers/input/touchscreen/imagis.c:407:39: warning: ‘imagis_3038_data’
defined but not used [-Wunused-const-variable=]
407 | static const struct imagis_properties imagis_3038_data = {
drivers/input/touchscreen/imagis.c:398:39: warning: ‘imagis_3032c_data’
defined but not used [-Wunused-const-variable=]
398 | static const struct imagis_properties imagis_3032c_data = {
Only define the variables 'imagis_303*_data' when the CONFIG_OF
is enabled.
Fixes: 1e48ee99f6 ("Input: imagis - add supports for Imagis IST3038")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Acked-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241023094831.1680214-1-zengheng4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Specific PCI subsystem ID (SSID) of WiFi cards is used by specific
customer who want to enable various features with different arguments.
Define PCI SSID quirks tables to enable thermal protection with two kinds
of thermal values for 110 and 120 degree Celsius.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241016133735.7571-3-pkshih@realtek.com
To prevent chip overheating, reduce TX duty as the mechanism of thermal
protection. When temperature is raising over a threshold, send a firmware
command to reduce TX duty. If temperature is still raising, higher level
is adopted to have lower active duration.
The equation and unit of thermal values are different from chip to chip,
so define constant thresholds of thermal value to corresponding absolute
temperature of 110 and 120 degree Celsius.
Latter patch will decide which thermal threshold is adopted, and current
is still not enable thermal protection.
For debugging, add a flag to disable_dm that thermal protection can be
disabled to clarify low throughput in field.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241016133735.7571-2-pkshih@realtek.com
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF
sockmap link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN
enabled reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts
into read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an
invalid check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF
filesystem (Hou Tao)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZxrAzxUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPcHwD8DnBSPlHX9OezMWCm8mjVx2Fd26W9
/IaiW2tyOPtoSGIA/3hfgfLrxkb3Raoh0miQB2+FRrz9e+y7i8c4Q91mcUgJ
=Hvht
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
pcim_iomap_table() and pcim_request_regions() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patch.msgid.link/20241024140426.157444-2-pstanner@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults,
but as happens on more models it is using IN1 instead of IN3 for
its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P
for jack-detection.
Add a DMI quirk for this to fix the internal-mic and jack-detection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some x86 Bay Trail tablets which shipped with Android as factory OS,
the DSDT is so broken that the codec needs to be manually instantatiated
by the special x86-android-tablets.ko "fixup" driver for cases like this.
This means that the codec-dev cannot be retrieved through its ACPI fwnode,
add support to the bytcr_rt5640 machine driver for such manually
instantiated rt5640 i2c_clients.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass through the SYSTEM_OFF2 function for hibernation, just like SYSTEM_OFF.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-6-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in __octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dR3Q
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
As with PSCI v1.1 in commit 512865d83f ("KVM: arm64: Bump guest PSCI
version to 1.1"), expose v1.3 to the guest by default. The SYSTEM_OFF2
call which is exposed by doing so is compatible for userspace because
it's just a new flag in the event that KVM raises, in precisely the same
way that SYSTEM_RESET2 was compatible when v1.1 was enabled by default.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-4-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and ensure that they preserve the virtual environment
appropriately to allow the guest to resume safely (or bump the
hardware_signature in the FACS to trigger a clean reboot instead).
This feature is safe to enable unconditionally (in a subsequent commit)
because it is exposed to userspace through the existing
KVM_SYSTEM_EVENT_SHUTDOWN event, just with an additional flag which
userspace can use to know that the instance intended hibernation instead
of a plain power-off.
As with SYSTEM_RESET2, there is only one type available (in this case
HIBERNATE_OFF), and it is not explicitly reported to userspace through
the event; userspace can get it from the registers if it cares).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-3-dwmw2@infradead.org
[oliver: slight cleanup of comments]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This NULL check is reversed so the function doesn't work.
Fixes: dad01f93f4 ("drm/amdgpu: validate hw_fini before function call")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f4fc849e-4e76-4448-8657-caa4c69910b0@stanley.mountain
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One of the challenges to contributing to the display code is the
complexity of the DC component. This commit adds a documentation page
that discusses the programming model used by DCN and an overview of how
the display code is organized.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu driver is composed of multiple components, each of which can
be a source of some specific problem that the user/developer can see.
This commit introduces steps to narrow down and collect display
information.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a 2nd fault comes in before the 1st is handled, the 1st fault will
clear out the FAULT STATUS registers before the 2nd fault is handled.
Thus we get a lot of zeroes. If status=0, just skip the L2 fault status
information, to avoid confusion of why some VM fault status prints in
dmesg are all zeroes.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two events to trace the beginning and the end of
amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was
placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end
than.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host drivers can create partial hives per guest by disabling xgmi sharing
between certain peers in the main hive.
Typically, these partial hives are fully connected per guest session.
In the event that the host makes a mistake by adding a non-shared node
to a guest session, have the KFD reflect sharing disabled by severing
the IO link.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: James Yao <yiqing.yao@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free sg table when dma_map_sgtable() failed to avoid memory leak.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On a hive, NPS request is placed by the first one for all devices in the
hive. If the request fails, mark the mode as UNKNOWN so that subsequent
devices on unload don't request it. Also, fix the mutex double lock
issue in error condition, should have been mutex_unlock.
Fixes: ee52489d12 ("drm/amdgpu: Place NPS mode request on unload")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
as the adding of mb() should be sufficient in function unmap_queues_cpsch,
remove the add of volatile type as recommended
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On nbio v7.4, ras controller interrupt and athub
interrupt are generated after injecting UE to PCIE,
but gpu reset only needs to be triggered once.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update to commit 0b02076f99 ("docs: programming-language: add Rust
programming language section")
scripts/checktransupdate.py reports:
Documentation/translations/zh_CN/process/programming-language.rst
commit 0b02076f99 ("docs: programming-language: add Rust programming
language section")
commit 38484a1d0c ("docs: programming-language: remove mention of the
Intel compiler")
2 commits needs resolving in total
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20241023062750.849951-1-dzm91@hust.edu.cn>
The size of a.data_type is set abnormally large, causing shift-out-of-bounds.
To fix this, we need to add validation on a.data_type in
alloc_lru_idx_fragmentation().
Reported-by: syzbot+7f45fa9805c40db3f108@syzkaller.appspotmail.com
Fixes: 260af1562e ("bcachefs: Kill alloc_v4.fragmentation_lru")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/87a5eub5s8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/87bjzab5sd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/87cyjqb5sh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87ed46b5sm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87fromb5sr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Current test-component.c is using for_each_endpoint_of_node()
for parsing "port", because there was no "port" base loop before.
It has been assuming 1 port has 1 endpoint here.
But now we can use "port" base loop (= for_each_of_graph_port()).
Let's replace for_each function from "endpoint" base to "port" base.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87h692b5sw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
