When total_req_power is 0, divvy_up_power() will set granted_power to 0,
and cdev will be limited to the lowest performance. If our polling delay
is set to 200ms, it means that cdev cannot perform better within 200ms
even if cdev has a sudden load. This will affect the performance of cdev
and is not as expected.
For this reason, if nobody requests power, then set the granted power to
the max_power.
Signed-off-by: ZhengShaobo <zhengshaobo1@xiaomi.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241021121138.422-1-zhengshaobo1@xiaomi.com
[ rjw: Fixed up tags ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move thermal_zone_device_init() along with thermal_zone_device_check()
closer to the callers of the former, where they fit better together.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1906685.CQOukoFCf9@rjwysocki.net
Modify the thermal core to use three lists of trip points:
trips_high, containing trips with thresholds strictly above the current
thermal zone temperature,
trips_reached, containing trips with thresholds at or below the current
zone temperature,
trips_invalid, containing trips with temperature equal to
THERMAL_ZONE_INVALID,
where the first two lists are always sorted by the current trip
threshold.
For each trip in trips_high, there is no mitigation under way and
the trip threshold is equal to its temperature. In turn, for each
trip in trips_reached, there is mitigation under way and the trip
threshold is equal to its low temperature. The trips in trips_invalid,
of course, need not be taken into consideration.
The idea is to make __thermal_zone_device_update() walk trips_high and
trips_reached instead of walking the entire table of trip points in a
thermal zone. Usually, it will only need to walk a few entries in one
of the lists and check one entry in the other list, depending on the
direction of the zone temperature changes, because crossing many trips
by the zone temperature in one go between two consecutive temperature
checks should be unlikely (if it occurs often, the thermal zone
temperature should probably be checked more often either or there
are too many trips).
This also helps to eliminate one temporary trip list used for trip
crossing notification (only one temporary list is needed for this
purpose instead of two) and the remaining temporary list may be sorted
by the current trip threshold value, like the trips_reached list, so
the additional notify_temp field in struct thermal_trip_desc is not
necessary any more.
Moreover, since the trips_reached and trips_high lists are sorted,
the "low" and "high" values needed by thermal_zone_set_trips() can be
determined in a straightforward way by looking at one end of each list.
Of course, additional work is needed in some places in order to
maintain the ordering of the lists, but it is limited to situations
that should be rare, like updating a trip point temperature or
hysteresis, thermal zone initialization, or system resume.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2003443.usQuhbGJ8B@rjwysocki.net
[ rjw: Added a comment to thermal_zone_handle_trips() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since thermal_zone_set_trip_temp() is now located in the same file
as thermal_trip_crossed(), it can invoke the latter directly without
using the thermal_zone_trip_down() wrapper that has no other users.
Update thermal_zone_set_trip_temp() accordingly and drop
thermal_zone_trip_down().
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1807510.VLH7GnMWUR@rjwysocki.net
In preparation for subsequent changes, move two functions used
for updating trip points, thermal_zone_set_trip_temp() and
thermal_zone_set_trip_hyst(), to thermal_core.c.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/3248558.5fSG56mABF@rjwysocki.net
Notice that some processing related to trip point crossing carried out
in handle_thermal_trip() and thermal_zone_set_trip_temp() may as well
be done in thermal_trip_crossed(), which allows code duplication to be
reduced, so change the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1982859.PYKUYFuaPT@rjwysocki.net
In preparation for subsequent changes, modify thermal_trip_crossed()
to take a trip descriptor pointer instead of a pointer to struct
thermal_trip and propagate this change to thermal_zone_trip_down().
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/10547668.nUPlyArG6x@rjwysocki.net
In preparation for subsequent changes, move the invocations of
thermal_thresholds_handle() and thermal_zone_set_trips() in
__thermal_zone_device_update() after the processing of the
temporary trip lists.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/3323276.44csPzL39Z@rjwysocki.net
Subsequently, trips will be moved between sorted lists in multiple
places, so replace add_trip_to_sorted_list() with an analogous
function, move_trip_to_sorted_list(), that will move a given trip
to a given sorted list.
To allow list_del() used in the new function to work, initialize the
list_node fields in trip descriptors where applicable so they are
always valid.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2960197.e9J7NaK4W3@rjwysocki.net
Since the list node field in struct thermal_trip_desc is going to be
used for purposes other than trip crossing notification, rename it
to list_node.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2201558.irdbgypaU6@rjwysocki.net
Since it is not expected that multiple trip points will be crossed
in one go very often (if this happens, there are too many trip points
in the given thermal zone or they are checked too rarely), quite likely
it is more efficient to build a sorted list of crossed trip points than
to put them on an unsorted list and sort it later.
Moreover, trip points are often sorted in ascending temperature order
during thermal zone registration, so building a sorted list out of
them is quite straightforward and relatively inexpensive.
Accordingly, make handle_thermal_trip() maintain list ordering when
adding trip points to the lists and get rid of separate list sorting
in __thermal_zone_device_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4930656.GXAFRqVoOG@rjwysocki.net
CS42L84 is a headphone jack codec made by Cirrus Logic and seen in Apple
computer models starting with 2021 Macbook Pros. It is not a publicly
documented part. To a degree the part is similar to the public CS42L42.
(The L84 superseded L83 seen in earlier Apple models, and the L83 was
pretty much the same as L42.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241020-cs42l84-v2-1-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some jacks integrated on devices with this codec, such as certain
Apple Silicon Macs, have quite trigger-happy tip sense switches that
cause a tip sense IRQ before the plug is fully seated. If users are
unfortunate with their timing, this can lead to headsets being detected
as mic-less headphones among other issues with the codec's device
detection routines.
Introduce some rudimentary ring sense interrupt handling so that we
can re-trigger the codec's detection routines when we are certain
that the plug is fully seated.
This seems to differ from what other Cirrus drivers do, but is
necessary for devices to be reliably detected properly here.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-3-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L84 is a codec from Cirrus Logic found in Apple Silicon Macs.
The chip continues Apple's long tradition of compelling vendors to
spin out bespoke SKUs that are based on existing IP but made subtly
incompatible with the publicly available part. CS42L84 is very similar
to CS42L42, but has a different regmap.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-2-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In success case, the revision holds a non-null pointer. The current
logic incorrectly returns an error for a non-null pointer, whereas
it should return an error for a null pointer.
The socinfo driver for IPQ9574 and IPQ5332 is currently broken,
resulting in the following error message
qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with
error -12
Add a null check for the revision to ensure it returns an error only in
failure case (null pointer).
Fixes: e694d2b5c5 ("soc: qcom: Add check devm_kasprintf() returned value")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
tlmm 74 was experimentally found to be panel enable pin, which shall be
high for panel (both low-res IPS, OLED) to work. Define it as such.
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20241016202253.9677-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: eb57cbe730 ("arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources")
Cc: stable@vger.kernel.org # 6.11
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Cc: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Cc: stable@vger.kernel.org # 6.11
Cc: Xilin Wu <wuxilin123@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: eb57cbe730 ("arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources")
Cc: stable@vger.kernel.org # 6.11
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set the initial rec_seq to 0xffffffffffffffff so that it wraps
immediately. The send() call should fail with EBADMSG.
A bug in this code was fixed in commit cfaa80c91f ("net/tls: do not
free tls_rec on async operation in bpf_exec_tx_verdict()").
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20775fcfd0371422921ee60a42de170c0398ac10.1729244987.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
phonet: Convert all doit() and dumpit() to RCU.
addr_doit() and route_doit() access only phonet_device_list(dev_net(dev))
and phonet_pernet(dev_net(dev))->routes, respectively.
Each per-netns struct has its dedicated mutex, and RTNL also protects
the structs. __dev_change_net_namespace() has synchronize_net(), so
we have two options to convert addr_doit() and route_doit().
1. Use per-netns RTNL
2. Use RCU and convert each struct mutex to spinlock_t
As RCU is preferable, this series converts all PF_PHONET's doit()
and dumpit() to RCU.
4 doit()s and 1 dumpit() are now converted to RCU, 70 doit()s and
28 dumpit()s are still under RTNL.
====================
Link: https://patch.msgid.link/20241017183140.43028-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now only __dev_get_by_index() depends on RTNL in route_doit().
Let's use dev_get_by_index_rcu() and register route_doit() with
RTNL_FLAG_DOIT_UNLOCKED.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
route_doit() calls phonet_route_add() or phonet_route_del()
for RTM_NEWROUTE or RTM_DELROUTE, respectively.
Both functions only touch phonet_pernet(dev_net(dev))->routes,
which is currently protected by RTNL and its dedicated mutex,
phonet_routes.lock.
We will convert route_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, rtm_phonet_notify() fetches netns and ifindex from dev.
Once route_doit() is converted to RCU, rtm_phonet_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to rtm_phonet_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will convert route_doit() to RCU.
route_doit() will call rtm_phonet_notify() outside of RCU due
to GFP_KERNEL, so dev will not be available in fill_route().
Let's pass ifindex directly to fill_route().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
getaddr_dumpit() already relies on RCU and does not need RTNL.
Let's use READ_ONCE() for ifindex and register getaddr_dumpit()
with RTNL_FLAG_DUMP_UNLOCKED.
While at it, the retval of getaddr_dumpit() is changed to combine
NLMSG_DONE and save recvmsg() as done in 58a4ff5d77 ("phonet: no
longer hold RTNL in route_dumpit()").
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now only __dev_get_by_index() depends on RTNL in addr_doit().
Let's use dev_get_by_index_rcu() and register addr_doit() with
RTNL_FLAG_DOIT_UNLOCKED.
While at it, I changed phonet_rtnl_msg_handlers[]'s init to C99
style like other core networking code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addr_doit() calls phonet_address_add() or phonet_address_del()
for RTM_NEWADDR or RTM_DELADDR, respectively.
Both functions only touch phonet_device_list(dev_net(dev)),
which is currently protected by RTNL and its dedicated mutex,
phonet_device_list.lock.
We will convert addr_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will convert addr_doit() and getaddr_dumpit() to RCU, both
of which call fill_addr().
The former will call phonet_address_notify() outside of RCU
due to GFP_KERNEL, so dev will not be available in fill_addr().
Let's pass ifindex directly to fill_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function thermal_genl_auto() does not free the allocated message
in the error path. Fix that by putting a out label and jump to it
which will free the message instead of directly returning an error.
Fixes: 47c4b0de08 ("tools/lib/thermal: Add a thermal library")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241024105938.1095358-1-daniel.lezcano@linaro.org
[ rjw: Fixed up the !msg error path, added Fixes tag ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To pick up the changes from these csets:
dc1e67f70f ("KVM VMX: Move MSR_IA32_VMX_MISC bit defines to asm/vmx.h")
d7bfc9ffd5 ("KVM: VMX: Move MSR_IA32_VMX_BASIC bit defines to asm/vmx.h")
beb2e44604 ("x86/cpu: KVM: Move macro to encode PAT value to common header")
e7e80b66fb ("x86/cpu: KVM: Add common defines for architectural memory types (PAT, MTRRs, etc.)")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
To see how this works take a look at this previous update:
https://git.kernel.org/torvalds/c/174372668933ede51743726689 ("tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING")
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin3.li@intel.com>
Link: https://lore.kernel.org/lkml/ZxpLSBzGin3vjs3b@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the thermal zone is unregistered (thermal sensor module being
unloaded), no lock is held when flushing the thresholds. That results
in a WARN when the lockdep validation is set in the kernel config.
This has been reported by syzbot.
As the thermal zone is in the process of being destroyed, there is no
need to send a notification about purging the thresholds to the
userspace as this one will receive a thermal zone deletion
notification which imply the deletion of all the associated resources
like the trip points or the user thresholds.
Split the function thermal_thresholds_flush() into a lockless one
without notification and its call with the lock annotation followed
with the thresholds flushing notification.
Please note this scenario is unlikely to happen, as the sensor drivers
are usually compiled-in in order to have the thermal framework to be
able to kick in at boot time if needed.
Fixes: 445936f9e2 ("thermal: core: Add user thresholds support")
Link: https://lore.kernel.org/all/67124175.050a0220.10f4f4.0012.GAE@google.com
Reported-by: syzbot+f24dd060c1911fe54c85@syzkaller.appspotmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241024102303.1086147-1-daniel.lezcano@linaro.org
[ rjw: Subject edit, added Fixes tag ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enhance the thermal-engine skeleton with the thresholds added in the
kernel and use the API exported by the thermal library.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-6-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal framework supports the thresholds and allows the userspace
to create, delete, flush, get the list of the thresholds as well as
getting the list of the thresholds set for a specific thermal zone.
Add the netlink abstraction in the thermal library to take full
advantage of thresholds for the userspace program.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-5-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal netlink has been extended with more commands which require
an encoding with more information. The generic encoding function puts
the thermal zone id with the command name. It is the unique
parameters.
The next changes will provide more parameters to the command. Set the
scene for those new parameters by making the encoding function more
generic.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-4-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thresholds exist but there is no notification neither action code
related to them yet.
These changes implement the netlink for the notifications when the
thresholds are crossed, added, deleted or flushed as well as the
commands which allows to get the list of the thresholds, flush them,
add and delete.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-3-daniel.lezcano@linaro.org
[ rjw: Use the thermal_zone guard for locking, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch over the thermal core to using a mutex guard for
thermal_governor_lock management.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3679429.R56niFO833@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In preparation for a subsequent change that will switch over the thermal
core to using a mutex guard for managing thermal_governor_lock, move
the code running in thermal_zone_device_register_with_trips() under that
lock into a separate function called thermal_zone_init_governor().
While at it, drop a useless comment.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4408795.ejJDZkT8p0@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add and use a special guard for cooling devices.
This allows quite a few error code paths to be simplified among
other things and brings in code size reduction for a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5837621.DvuYhMxLoT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Changes are:
* Enable the internal clock when do reset on UHS-II mode.
* Increase timeout value before detecting UHS-II interface.
* Add vendor settings for UHS-II mode.
* Use the function sdhci_gli_wait_software_reset_done() for gl9767 reset.
* Remove unnecessary code from sdhci_gl9767_reset().
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Signed-off-by: Lucas Lai <lucas.lai@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241018105333.4569-17-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Changes are:
* Disable GL9755 overcurrent interrupt when power on/off on UHS-II.
* Enable the internal clock when do reset on UHS-II mode.
* Increase timeout value before detecting UHS-II interface.
* Add vendor settings fro UHS-II mode.
* Remove sdhci_gli_enable_internal_clock functon unused clk_ctrl variable.
* Make a function sdhci_gli_wait_software_reset_done() for gl9755 reset.
* Remove unnecessary code from sdhci_gl9755_reset().
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Signed-off-by: Lucas Lai <lucas.lai@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241018105333.4569-16-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch prepares for adding UHS-II support at a specific UHS-II
capable sdhci-pci controller, GL9755 for now.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241018105333.4569-15-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
