mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,323,830 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jett Rink
|
2e1827de1b |
char: tpm: cr50: Add new device/vendor ID 0x50666666
Accept another DID:VID for the next generation Google TPM. This TPM has the same Ti50 firmware and fulfills the same interface. Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Jan Dabros
|
44637b0b40 |
char: tpm: cr50: Move i2c locking to request/relinquish locality ops
Move i2c locking primitives to request_locality and relinquish_locality callbacks, what effectively blocks TPM bus for the whole duration of logical TPM operation. With this in place, cr50-equipped TPM may be shared with external CPUs - assuming that underneath i2c controller driver is aware of this setup (see i2c-designware-amdpsp as an example). Signed-off-by: Jan Dabros <jsd@semihalf.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Jan Dabros
|
932e3a5e1e |
char: tpm: cr50: Use generic request/relinquish locality ops
Instead of using static functions tpm_cr50_request_locality and tpm_cr50_release_locality register callbacks from tpm class chip->ops created for this purpose. Signed-off-by: Jan Dabros <jsd@semihalf.com> Signed-off-by: Grzegorz Bernacki <bernacki@chromium.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Stefan Berger
|
02e9bda80d |
tpm: ibmvtpm: Set TPM_OPS_AUTO_STARTUP flag on driver
Set the TPM_OPS_AUTO_STARTUP on the driver so that the ibmvtpm driver now uses tpm2_auto_startup and tpm1_auto_startup like many other drivers do. Remove tpm_get_timeouts, tpm2_get_cc_attrs_tbl, and tpm2_sessions_init calls from it since these will all be called in tpm2_auto_startup and tpm1_auto_startup. The exporting of the tpm2_session_init symbol was only necessary while the ibmvtpm driver was calling this function. Since this is not the case anymore, remove this symbol from being exported. What is new for the ibmvtpm driver is that now tpm2_do_selftest and tpm1_do_selftest will be called that send commands to the TPM to perform or continue its selftest. However, the firmware should already have sent these commands so that the TPM will not do much work at this time. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Linus Torvalds
|
071b34dcf7 |
sound updates for 6.13-rc1
This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received
lots of new drivers for new vendors.
* ALSA Core:
- The new accel operation mode for compress-offload API;
only the core part, and the actual user will follow at next
* ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
* HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio
-----BEGIN PGP SIGNATURE-----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=gOHc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
|
||
|
Linus Torvalds
|
55ae3eef10 |
i2c-for-6.13-rc1
i2c-core (Wolfram)
- drivers can now use a GPIO as a side channel for SMBus Alerts
using a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
i2c-host updates (Andi)
Major Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.
- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
- ACPI documentation for PIIX4.
New Features:
- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.
Deprecated Features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New Hardware Support:
- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)
at24 updates (Bartosz)
- add support for the lockable page on ST M24256E
-----BEGIN PGP SIGNATURE-----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=lrn5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
|
||
Alex Deucher
|
979bfe291b |
Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable"
This reverts commit
|
||
|
Alex Deucher
|
93df748737 |
drm/amdgpu/jpeg: cancel the jpeg worker
Looks like these got missed when jpeg was split from vcn. Cancel the jpeg workers rather than vcn workers. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
Vitaly Prosyak
|
b61badd20b |
drm/amdgpu: fix usage slab after free
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147 [ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1 [ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000016] Call Trace: [ +0.000008] <TASK> [ +0.000009] dump_stack_lvl+0x76/0xa0 [ +0.000017] print_report+0xce/0x5f0 [ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] ? srso_return_thunk+0x5/0x5f [ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200 [ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] kasan_report+0xbe/0x110 [ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000023] __asan_report_load8_noabort+0x14/0x30 [ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? enable_work+0x124/0x220 [ +0.000015] ? __pfx_enable_work+0x10/0x10 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? free_large_kmalloc+0x85/0xf0 [ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched] [ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu] [ +0.000735] ? __kasan_check_read+0x11/0x20 [ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu] [ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu] [ +0.000679] ? mutex_unlock+0x80/0xe0 [ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu] [ +0.000662] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? mutex_unlock+0x80/0xe0 [ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu] [ +0.000663] drm_minor_release+0xc9/0x140 [drm] [ +0.000081] drm_release+0x1fd/0x390 [drm] [ +0.000082] __fput+0x36c/0xad0 [ +0.000018] __fput_sync+0x3c/0x50 [ +0.000014] __x64_sys_close+0x7d/0xe0 [ +0.000014] x64_sys_call+0x1bc6/0x2680 [ +0.000014] do_syscall_64+0x70/0x130 [ +0.000014] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit+0x43/0x50 [ +0.000012] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? exc_page_fault+0x7c/0x110 [ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000014] RIP: 0033:0x7ffff7b14f67 [ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff [ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67 [ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003 [ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000 [ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8 [ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040 [ +0.000020] </TASK> [ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s: [ +0.000014] kasan_save_stack+0x28/0x60 [ +0.000008] kasan_save_track+0x18/0x70 [ +0.000007] kasan_save_alloc_info+0x38/0x60 [ +0.000007] __kasan_kmalloc+0xc1/0xd0 [ +0.000007] kmalloc_trace_noprof+0x180/0x380 [ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched] [ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu] [ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu] [ +0.000662] amdgpu_pci_probe+0x361/0xf30 [amdgpu] [ +0.000651] local_pci_probe+0xe7/0x1b0 [ +0.000009] pci_device_probe+0x248/0x890 [ +0.000008] really_probe+0x1fd/0x950 [ +0.000008] __driver_probe_device+0x307/0x410 [ +0.000007] driver_probe_device+0x4e/0x150 [ +0.000007] __driver_attach+0x223/0x510 [ +0.000006] bus_for_each_dev+0x102/0x1a0 [ +0.000007] driver_attach+0x3d/0x60 [ +0.000006] bus_add_driver+0x2ac/0x5f0 [ +0.000006] driver_register+0x13d/0x490 [ +0.000008] __pci_register_driver+0x1ee/0x2b0 [ +0.000007] llc_sap_close+0xb0/0x160 [llc] [ +0.000009] do_one_initcall+0x9c/0x3e0 [ +0.000008] do_init_module+0x241/0x760 [ +0.000008] load_module+0x51ac/0x6c30 [ +0.000006] __do_sys_init_module+0x234/0x270 [ +0.000007] __x64_sys_init_module+0x73/0xc0 [ +0.000006] x64_sys_call+0xe3/0x2680 [ +0.000006] do_syscall_64+0x70/0x130 [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000015] Freed by task 2147 on cpu 6 at 160.507651s: [ +0.000013] kasan_save_stack+0x28/0x60 [ +0.000007] kasan_save_track+0x18/0x70 [ +0.000007] kasan_save_free_info+0x3b/0x60 [ +0.000007] poison_slab_object+0x115/0x1c0 [ +0.000007] __kasan_slab_free+0x34/0x60 [ +0.000007] kfree+0xfa/0x2f0 [ +0.000007] drm_sched_fini+0x19d/0x410 [gpu_sched] [ +0.000012] amdgpu_fence_driver_sw_fini+0xc4/0x2f0 [amdgpu] [ +0.000662] amdgpu_device_fini_sw+0x77/0xfc0 [amdgpu] [ +0.000653] amdgpu_driver_release_kms+0x16/0x80 [amdgpu] [ +0.000655] drm_minor_release+0xc9/0x140 [drm] [ +0.000071] drm_release+0x1fd/0x390 [drm] [ +0.000071] __fput+0x36c/0xad0 [ +0.000008] __fput_sync+0x3c/0x50 [ +0.000007] __x64_sys_close+0x7d/0xe0 [ +0.000007] x64_sys_call+0x1bc6/0x2680 [ +0.000007] do_syscall_64+0x70/0x130 [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000014] The buggy address belongs to the object at ffff8881b8605f80 which belongs to the cache kmalloc-64 of size 64 [ +0.000020] The buggy address is located 8 bytes inside of freed 64-byte region [ffff8881b8605f80, ffff8881b8605fc0) [ +0.000028] The buggy address belongs to the physical page: [ +0.000011] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1b8605 [ +0.000008] anon flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: 0xffffefff(slab) [ +0.000009] raw: 0017ffffc0000000 ffff8881000428c0 0000000000000000 dead000000000001 [ +0.000006] raw: 0000000000000000 0000000000200020 00000001ffffefff 0000000000000000 [ +0.000006] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000011] ffff8881b8605e80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ +0.000015] ffff8881b8605f00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ +0.000015] >ffff8881b8605f80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ +0.000013] ^ [ +0.000011] ffff8881b8606000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc [ +0.000014] ffff8881b8606080: fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb fb [ +0.000013] ================================================================== The issue reproduced on VG20 during the IGT pci_unplug test. The root cause of the issue is that the function drm_sched_fini is called before drm_sched_entity_kill. In drm_sched_fini, the drm_sched_rq structure is freed, but this structure is later accessed by each entity within the run queue, leading to invalid memory access. To resolve this, the order of cleanup calls is updated: Before: amdgpu_fence_driver_sw_fini amdgpu_device_ip_fini After: amdgpu_device_ip_fini amdgpu_fence_driver_sw_fini This updated order ensures that all entities in the IPs are cleaned up first, followed by proper cleanup of the schedulers. Additional Investigation: During debugging, another issue was identified in the amdgpu_vce_sw_fini function. The vce.vcpu_bo buffer must be freed only as the final step in the cleanup process to prevent any premature access during earlier cleanup stages. v2: Using Christian suggestion call drm_sched_entity_destroy before drm_sched_fini. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
Xiang Liu
|
928cd772e1 |
drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3
It is not necessarily corrupted. When there is RAS fatal error, device memory access is blocked. Hence vcpu bo cannot be saved to system memory as in a regular suspend sequence before going for reset. In other full device reset cases, that gets saved and restored during resume. v2: Remove redundant code like vcn_v4_0 did v2: Refine commit message v3: Drop the volatile v3: Refine commit message Signed-off-by: Xiang Liu <xiang.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
Jesse.zhang@amd.com
|
2f1b13521d |
drm/amdgpu: Fix sysfs warning when hotplugging
Fix the similar warning when hotplugging: [ 155.585721] kernfs: can not remove 'enforce_isolation', no directory [ 155.592201] WARNING: CPU: 3 PID: 6960 at fs/kernfs/dir.c:1683 kernfs_remove_by_name_ns+0xb9/0xc0 [ 155.601145] Modules linked in: xt_MASQUERADE xt_comment nft_compat veth bridge stp llc overlay nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr intel_rapl_msr amd_atl intel_rapl_common amd64_edac edac_mce_amd amdgpu kvm_amd kvm ipmi_ssif amdxcp rapl drm_exec gpu_sched drm_buddy i2c_algo_bit drm_suballoc_helper drm_ttm_helper ttm pcspkr drm_display_helper acpi_cpufreq drm_kms_helper video wmi k10temp i2c_piix4 acpi_ipmi ipmi_si drm zram ip_tables loop squashfs dm_multipath crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 sp5100_tco ixgbe rfkill ccp dca sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf ipmi_msghandler fuse [ 155.685224] systemd-journald[1354]: Compressed data object 957 -> 524 using ZSTD [ 155.685687] CPU: 3 PID: 6960 Comm: amd_pci_unplug Not tainted 6.10.0-1148853.1.zuul.164395107d6642bdb451071313e9378d #1 [ 155.704149] Hardware name: TYAN B8021G88V2HR-2T/S8021GM2NR-2T, BIOS V1.03.B10 04/01/2019 [ 155.712383] RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 [ 155.717805] Code: a0 00 48 89 ef e8 37 96 c7 ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 f7 96 a0 00 0f 0b eb ab 48 c7 c7 48 ba 7e 8f e8 f7 66 bf ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 [ 155.736766] RSP: 0018:ffffb1685d7a3e20 EFLAGS: 00010296 [ 155.742108] RAX: 0000000000000038 RBX: ffff929e94c80000 RCX: 0000000000000000 [ 155.749363] RDX: ffff928e1efaf200 RSI: ffff928e1efa18c0 RDI: ffff928e1efa18c0 [ 155.756612] RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000003 [ 155.763855] R10: ffffb1685d7a3cd8 R11: ffffffff8fb3e1c8 R12: ffffffffc1ef5341 [ 155.771104] R13: ffff929e94cc5530 R14: 0000000000000000 R15: 0000000000000000 [ 155.778357] FS: 00007fd9dd8d9c40(0000) GS:ffff928e1ef80000(0000) knlGS:0000000000000000 [ 155.786594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 155.792450] CR2: 0000561245ceee38 CR3: 0000000113018000 CR4: 00000000003506f0 [ 155.799702] Call Trace: [ 155.802254] <TASK> [ 155.804460] ? __warn+0x80/0x120 [ 155.807798] ? kernfs_remove_by_name_ns+0xb9/0xc0 [ 155.812617] ? report_bug+0x164/0x190 [ 155.816393] ? handle_bug+0x3c/0x80 [ 155.819994] ? exc_invalid_op+0x17/0x70 [ 155.823939] ? asm_exc_invalid_op+0x1a/0x20 [ 155.828235] ? kernfs_remove_by_name_ns+0xb9/0xc0 [ 155.833058] amdgpu_gfx_sysfs_fini+0x59/0xd0 [amdgpu] [ 155.838637] gfx_v9_0_sw_fini+0x123/0x1c0 [amdgpu] [ 155.843887] amdgpu_device_fini_sw+0xbc/0x3e0 [amdgpu] [ 155.849432] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ 155.855235] drm_dev_put.part.0+0x3c/0x60 [drm] [ 155.859914] drm_release+0x8b/0xc0 [drm] [ 155.863978] __fput+0xf1/0x2c0 [ 155.867141] __x64_sys_close+0x3c/0x80 [ 155.870998] do_syscall_64+0x64/0x170 V2: Add details in comments (Tim) Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reported-by: Andy Dong <andy.dong@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Jesse.zhang@amd.com
|
fb9898243a |
drm/amdgpu: Add sysfs interface for vcn reset mask
Add the sysfs interface for vcn:
vcn_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: s/sdma/vcn/ in the reset mask setup
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
||
|
Alex Deucher
|
4c28e645aa |
drm/amdgpu/gmc7: fix wait_for_idle callers
The wait_for_idle signature was changed, but the callers
were not.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reported-by: Michel Dänzer <michel@daenzer.net>
Fixes:
|
||
Lijo Lazar
|
da868898cf |
drm/amd/pm: Remove arcturus min power limit
As per power team, there is no need to impose a lower bound on arcturus power limit. Any unreasonable limit set will result in frequent throttling. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
Kenneth Feng
|
76c7f08094 |
drm/amd/pm: skip setting the power source on smu v14.0.2/3
skip setting power source on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x |
||
|
Kenneth Feng
|
b0df0e7778 |
drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3
disable pcie speed switching on Intel platform for smu v14.0.2/3 based on Intel's requirement. v2: align the setting with smu v13. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x |
||
|
Lijo Lazar
|
cdc6705f98 |
drm/amdkfd: Use the correct wptr size
Write pointer could be 32-bit or 64-bit. Use the correct size during initialization. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
||
|
Linus Torvalds
|
341d041daa |
iommufd 6.13 merge window pull
Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing
memory for an iommu mapping. To date VFIO/iommufd have used VMA's and
pin_user_pages(), this now allows using memfds and memfd_pin_folios().
Notably this creates a pure folio path from the memfd to the iommu page
table where memory is never broken down to PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two
processes. Combined with the above this allows iommufd to support a VMM
re-start using exec() where something like qemu would exec() a new
version of itself and fd pass the memfds/iommufd/etc to the new
process. The memfd allows DMA access to the memory to continue while
the new process is getting setup, and the CHANGE_PROCESS updates all
the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual
iommu. This will be used by VMMs to access hardware features that are
contained with in a VM. The first use is to inform the kernel of the
virtual SID to physical SID mapping when issuing SID based invalidation
on ARM. Further uses will tie HW features that are directly accessed by
the VM, such as invalidation queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used to
translate VM issued cache invalidation commands from virtual to physical
device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with
the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE
the driver can model this HW's behavior for nested translation. This
includes a shared branch from Will.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZzzKKwAKCRCFwuHvBreF
YaCMAQDOQAgw87eUYKnY7vFodlsTUA2E8uSxDmk6nPWySd0NKwD/flOP85MdEs9O
Ot+RoL4/J3IyNH+eg5kN68odmx4mAw8=
=ec8x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the
backing memory for an iommu mapping. To date VFIO/iommufd have used
VMA's and pin_user_pages(), this now allows using memfds and
memfd_pin_folios(). Notably this creates a pure folio path from the
memfd to the iommu page table where memory is never broken down to
PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between
two processes. Combined with the above this allows iommufd to
support a VMM re-start using exec() where something like qemu would
exec() a new version of itself and fd pass the memfds/iommufd/etc
to the new process. The memfd allows DMA access to the memory to
continue while the new process is getting setup, and the
CHANGE_PROCESS updates all the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed
virtual iommu. This will be used by VMMs to access hardware
features that are contained with in a VM. The first use is to
inform the kernel of the virtual SID to physical SID mapping when
issuing SID based invalidation on ARM. Further uses will tie HW
features that are directly accessed by the VM, such as invalidation
queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used
to translate VM issued cache invalidation commands from virtual to
physical device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work
with the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and
VDEVICE the driver can model this HW's behavior for nested
translation. This includes a shared branch from Will"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits)
iommu/arm-smmu-v3: Import IOMMUFD module namespace
iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
iommufd: Lock all IOAS objects
iommufd: Export do_update_pinned
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Use S2FWB for NESTED domains
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Documentation: userspace-api: iommufd: Update vDEVICE
iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command
iommufd/selftest: Add mock_viommu_cache_invalidate
iommufd/viommu: Add iommufd_viommu_find_dev helper
iommu: Add iommu_copy_struct_from_full_user_array helper
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
iommu/viommu: Add cache_invalidate to iommufd_viommu_ops
iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
...
|
||
|
Linus Torvalds
|
51ae62a12c |
dma-mapping updates for Linux 6.13
- improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8xN8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNwEBAAtd0zTiNuEUklY6YtZ7l/Zaudibmq1klHLGAQZEa9 J4P2zzJ6xTkUblq/aVmFUQmf+vuuszjHIrrXnL3tAulSQKxS5Zj3Cci4cW4IAfBn GXB3OTR2lgXSk+8sulgiwc1AA8xgIFJJgZDTni1WdiW9LwLvUyYI1XNVAwCYOM2J HS2QxIySm3eg23F5bRz+Xl3LQlWYlHkMHryqKloHWIqchmVpYlYbj7uBMjAH4FKz l3zhd9pZSp9w5NNCp2Y/d81XdOUSjcYSR1gUotLzmW0Sj3YjnKXKdjjlPrj3zimb 9EhgdalnpVrJ4Nr7MmpSUEbTVs+hBjXDoxTnnBRlKEl5aIKqceCrSBvoP70ygbkf KRqNS4ZxKe59cfnWAZQVcg8g01TetCoJR6QyGaoTE9Lz+9cPl2xAwyFmcYN2w/Cp qs0ZEFiNpqLAN5zwR/Pakz5YgIA/3N5MW0d9X9yEH9l4+HUMxWIF/qvThBSsGswT EmVUQqPpEzGJrcNYgC1UsEBltGmle02BwcoFEdMr7bzldW7yIpoDEOkKkBM3JFF9 vgkpAkZGA5j4VMSkSwOrhi1rI0XAoImtJeM0wqhLtpXgQDjrMd3DaW6by6uUeH5x DcXf6qVOAsB04je9JkHh9I4BXVrWC01MSgFdjfQRl9gktn7970YFswG4ksYAwxU6 xHQ= =ivZc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) * tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: save base/size instead of pointer to shared DMA pool dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err dma-mapping: drop unneeded includes from dma-mapping.h dma-mapping: trace more error paths dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map dma-mapping: trace dma_alloc/free direction dma-mapping: use macros to define events in a class dma-mapping: remove an outdated comment from dma-map-ops.h dma-debug: remove DMA_API_DEBUG_SG dma-debug: store a phys_addr_t in struct dma_debug_entry dma-debug: fix a possible deadlock on radix_lock |
||
|
Linus Torvalds
|
40f48f82a1 |
configfs updates for Linux 6.13
- remove unused code (Dr. David Alan Gilbert) - improve item creation performance (Seamus Connor) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8w7wLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNInBAAw8SDXF/rsJPic44XqRr4+nSgFif0Bhd0l8Xu1EZl ujE6EDGpbpk35CPK2cqhCk6tboFDayNeACWur52/NHxm+fO/gQq22LZU618HFtxJ QgS40naf6PczCY3SgEe4pOp/KlpGiO7y/FbgGYF2mVsTXpLzFq6ZC/RkAc3iir5E VUrnXRfsw0B7uZ/ndS+kBh6q0wTHkGqppi8rf4IpK051b/b5boFG+Kn0UpwK0iLX 47W7mwMgamAOWXHTHRxb/1dL7w5Q7YHvEqD39yHgs1iS+B9ooLZxSkdrkaigjWTM q6VQfemq9UQuDfbuAH8RKTbsopTxAUbPok/ioFe8SCiqbc/3CiU6ejQoIIWEh7Gy WUvD1ObMQKyP1T+rzblIzg1IU8XxddDjE/qpwZxhAKSmiihh6roRfjtTXmIGJdD4 TbwaqIOROSFCHFSbjLraXZ2YqE0OznIT01ZaV9SYEfi4AdbbVyy7bt8YOGX6zd36 Z73Z6G/t+ksL252KHQqtbUOTz2S3bVI3RePTqD6tl+J4sXLIR8CVC5zYn2z+gY8I 0fDBGt1Ur6XHOf/RGAuLo5PFo9xRntgKKPIMjTah4BFYAhIGhPGlxiX0l/XeokuX 3z/3zPJNX82o7QeI8bGo4qYz3oAs7PDsK4xmW2m6Ho8xXKVzLoohRQe8Aiex8o4o zQg= =nC4V -----END PGP SIGNATURE----- Merge tag 'configfs-6.13-2024-11-19' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - remove unused code (Dr. David Alan Gilbert) - improve item creation performance (Seamus Connor) * tag 'configfs-6.13-2024-11-19' of git://git.infradead.org/users/hch/configfs: configfs: improve item creation performance configfs: remove unused configfs_hash_and_remove |
||
Mark Rutland
|
a63d7408af |
arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
The kprobes_test suite's test_stacktrace_on_nested_kretprobe() test
currently fails on arm64, e.g.
| KTAP version 1
| 1..1
| KTAP version 1
| # Subtest: kprobes_test
| # module: test_kprobes
| 1..7
| ok 1 test_kprobe
| ok 2 test_kprobes
| ok 3 test_kprobe_missed
| ok 4 test_kretprobe
| ok 5 test_kretprobes
| ok 6 test_stacktrace_on_kretprobe
| # test_stacktrace_on_nested_kretprobe: EXPECTATION FAILED at lib/test_kprobes.c:327
| Expected stack_buf[i + 1] == target_return_address[1], but
| stack_buf[i + 1] == -96519936577004 (0xffffa83733777214)
| target_return_address[1] == -96519936577136 (0xffffa83733777190)
| # test_stacktrace_on_nested_kretprobe: EXPECTATION FAILED at lib/test_kprobes.c:338
| Expected stack_buf[1] == target_return_address[1], but
| stack_buf[1] == -96519936577004 (0xffffa83733777214)
| target_return_address[1] == -96519936577136 (0xffffa83733777190)
| not ok 7 test_stacktrace_on_nested_kretprobe
| # kprobes_test: pass:6 fail:1 skip:0 total:7
| # Totals: pass:6 fail:1 skip:0 total:7
| not ok 1 kprobes_test
The test assumes that when a stacktrace straddles an exception boundary,
no necessary entries will be omitted and no extraneous entries will be
reported, and when unwinding from a kretprobed callee, the next entry in
the trace will be its immediate caller (whether kretprobed or not).
Recently the arm64 stacktrace code was changed to always report the LR
at an exception boundary, where we don't know whether the LR is live.
In the case of the kretprobe trampoline the LR is not live at the time
the stacktrace is performed, and so the entry in the trace for the LR is
extraneous. This can be seen if a call to show_stack() is added to
stacktrace_internal_return_handler():
| Call trace:
| show_stack+0x18/0x30 (C)
| stacktrace_internal_return_handler+0x130/0x43c
| __kretprobe_trampoline_handler+0xa0/0x130
| kretprobe_breakpoint_handler+0x50/0x70
| call_break_hook+0x74/0x8c
| brk_handler+0x1c/0x60
| do_debug_exception+0x68/0x114
| el1_dbg+0x70/0x94
| el1h_64_sync_handler+0xc4/0xe4
| el1h_64_sync+0x6c/0x70
| kprobe_stacktrace_target+0x34/0x48 (P)
| kprobe_stacktrace_target+0x34/0x48 (LK) <-------- extra entry here
| kprobe_stacktrace_driver+0x24/0x40 (K)
| test_stacktrace_on_nested_kretprobe+0x84/0x160
| kunit_try_run_case+0x6c/0x160
| kunit_generic_run_threadfn_adapter+0x28/0x4c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
This breaks test_stacktrace_on_nested_kretprobe() because while the
caller (kprobe_stacktrace_driver()) appears in the trace, it doesn't
occur *immediately* after the first instance of callee
(kprobe_stacktrace_target()).
While this behaviour is unfortunate for the kretprobes tests, the
behaviour is desirable elsewhere (e.g. anywhere a human will read the
trace), and is otherwise not harmful.
For the moment, deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE on arm64
to disable the tests which depend on this behaviour. With
ARCH_CORRECT_STACKTRACE_ON_KRETPROBE deselected, the remaining tests
work as expected, e.g.
| KTAP version 1
| 1..1
| KTAP version 1
| # Subtest: kprobes_test
| # module: test_kprobes
| 1..5
| ok 1 test_kprobe
| ok 2 test_kprobes
| ok 3 test_kprobe_missed
| ok 4 test_kretprobe
| ok 5 test_kretprobes
| # kprobes_test: pass:5 fail:0 skip:0 total:5
| # Totals: pass:5 fail:0 skip:0 total:5
| ok 1 kprobes_test
In future we have several options to improve matters, e.g.
* Add metadata and update arm64's unwinder to skip the LR in this case.
This is likely to happen as part of work for RELIABLE_STACKTRACE for
other reasons, and might solve this case by coincidence.
* Modify the kretprobes tests to only require that the caller appears in
the trace after the callee, rather than requiring that it is
*immediately* after the callee. We might want separate
strict/not-strict options for this.
* Use reliable stacktrace for these tests, so that architectures which
cannot unwind across exception boundaries can explicitly handle this
by returning an error.
Fixes:
|
||
|
Linus Torvalds
|
fc39fb5691 |
A few more patches to add sanity checks in jfs
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmc/WUoACgkQNqiEXrVA jGRbDQ/8DEhFbtbr0ugUJmStEfn+8oBXhsKhYZE1Y+U69SZT924Vn1gfbhxIBH0d W1aKcRVvmP0ASfplQemIyiB9sY4Nxd4CUlFD3RqycFR0fAyGIb7XccpkJBhms5/J itscgATuE8u5wms3CDByAiEj3kMu8Luf+jDTFVB2SNP0xPeqsqluXtTQwEFHKAmS 4IhbAH6hQ9E+mqufID8WjhLyKZLhCe8PQ4ccsenNZo8km4xDAv5m0CZD1Ks6k87b 3n6iG6Wk+5gjzGC/vGOJJIX3eZchMFhCwG+SkJ/7UKT475oKYDjgflpO2yVXWjXz mGTFdTLg+wNH+Jh9/nUNCN/2KsFAIx2wcaFmnLC7fmCJFKjVEIQV5Pm0eGi+vdt5 hU/onwn8rlPeKD8OIh4zKGMzDZj2uX825lfVXlYJP64UE/rOPkJgd7MH8TtNiFlu lpxkhM/xpCMfyShUHMWe38C2VwjqMNhW5Mz2EoT9OqSFsTBXTpeoPZOFG+iiJ1Gc AFWYM9UrofVj4/bSOOVfDMGSqx8dGfGc/QtEDwvKmTsaZ9imfxDRGmQyTwwuBKmi EyuKUjwvIQmF8Z/fqLov+0JpW0XsJLmpVJJ3t451sJgzwrffob0afYrMsW/e7a+f zHDz+WSJBKYsb8Wq9owmY29oHGtaoNQ3IguxnbFmD2pkNNnmg/g= =V1oj -----END PGP SIGNATURE----- Merge tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy Pull jfs updates from Dave Kleikamp: "A few more patches to add sanity checks in jfs" * tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree jfs: xattr: check invalid xattr size more strictly jfs: fix array-index-out-of-bounds in jfs_readdir jfs: fix shift-out-of-bounds in dbSplit jfs: array-index-out-of-bounds fix in dtReadFirst |
||
|
Linus Torvalds
|
6a550ae556 |
dlm for 6.13
- Fix recovery of locks that are being converted between PR/CW modes. - Fix cleanup of rsb list if recovery is interrupted during recover_members. - Fix null dereference in debug code if dlm api is called improperly. - Fix wrong args passed to trace function. - Move error checks out of add_to_waiters so the function can't fail. - Clean up some code for configfs. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEcGkeEvkvjdvlR90nOBtzx/yAaaoFAmc/VzgACgkQOBtzx/yA aapoARAA2PziTYUrYOPkvGAhFb78Sa64s2ECL0EGJTaVMzwniNp3lIL4T6Pr7d3Y nSM+Kg/HMEXT5lC9jJHMfGrOLoUicfWlBPEmoWDe+eNvGYBQVXSFoKnOEATMoHx3 OaH+UwbO1sXW13I0mflRTM/T4cTJr8BfaHsCf2yvp68VcZDXLo/HcbMX5AYxc1er 7xOeCcEUOnAGtb4hG4Dm/PaFKcsC1k1GL/ePq/OgiEKVYNeI4k6MWmbpULjiZd7y kd6SfFqb+V/YTXWMTuheQ04eBxvMovzXjhGpxQLWyofOsij8lTjndHVm8AkZCMRo oqa40dh1GzN6llvsIMJbuXfvp7aQR9EcYU4jc5FLx1rLH0KJzbmKursOlvcV7oRn qBWixB3fUN8as47od86vpZIwkW/GTn7UTrrtu602lyp0pjhdq0DErYFwJuoYStti Q0Txf7S0mxqQ5jNvMEk3Rx0sV6zuwu2yq/QU5yiUa9eVUrukUuIBpdbHLdpXMgRR SDAENw70PsHobW29i9ipZnttNJ3DrG61beYdizLxMxfuaRK+532i8GETIW83wn0o Aj/B5EZPB8z8pbw0PvDFKDK4VzuVHkCBMVfdOGS8RgRVtYiyfyC2QJ+u7FQfu2U7 LXvYqmFDH3VqqAYuYwMGpx1Iz9RgFipZCmauFyIdFmLL6ClWDp4= =5K+Y -----END PGP SIGNATURE----- Merge tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Fix recovery of locks that are being converted between PR/CW modes - Fix cleanup of rsb list if recovery is interrupted during recover_members - Fix null dereference in debug code if dlm api is called improperly - Fix wrong args passed to trace function - Move error checks out of add_to_waiters so the function can't fail - Clean up some code for configfs * tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix dlm_recover_members refcount on error dlm: fix recovery of middle conversions dlm: make add_to_waiters() that it can't fail dlm: dlm_config_info config fields to unsigned int dlm: use dlm_config as only cluster configuration dlm: handle port as __be16 network byte order dlm: disallow different configs nodeid storages dlm: fix possible lkb_resource null dereference dlm: fix swapped args sb_flags vs sb_status |
||
Jens Axboe
|
ec9b3ac6e5 |
nvme updates for Linux 6.13
- Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin) -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmc/cBgACgkQPe3zGtjz RgmtPBAAp1Ak3PqAzW6gyJ0nTPoKOjnnJTXIQsTpypRG+c5Mq/NuNVQ7J/jc+g0M 15ZOdykUPEkNTDwtgzlpDpxjSTC+RmRMiU/1vD5U3NOPshUwCX7evj9XICocJHkl 8zuS9pwJBwltle/cYm0uxobSm6rEBZhwRmyCOFDWdBhdO9eCdeAKuMEDlHDH68Kj PMsiX/rSXtU1CtRJarr3esFbC3Jx7YpynUhuZUl4ydhk61y3TRkSwq0Zqz6VRTsV I5Kcxj49blSKynJ++AkcpMwUQ6k2xuKw5p3CECOrryl14l0Ls9ZIeWgpwpzz8cMx rqIj2+5ROKcHPLxgeYWkWDe0WkZ9XeKYOAsJMnkvRq5Pwgp8SnZfa23fO7RqfTmA 3w9bCKHeDsz9xawjW1yMVYDhrUs6fC2cCvC/Jec1s6dJnQJr77IWW1pgLb3PGcKz FM6PU/lb6hpvDoblDMTY/QyTXaprpfXJl0w1VwkPWtEdF4Qg2AcN98OHJuX6ppgZ dfzLBlNxWmpRUTbIFChyX4i8JmjOntJjFfSgJvHvtrFWCR2c8W+lVB67rDYu0pQV V5ZhQVpT2fCBNMJbPzPbjz1bnx1/LtBoVF+o7rJZy4oBbNCMeknV+cJlYvnjnNE2 HwUN9kYhQ3jNaMsOIWa8Qiu4EHBAFcqCzilFGFbiYCtLlkIL1XA= =MNbG -----END PGP SIGNATURE----- Merge tag 'nvme-6.13-2024-11-21' of git://git.infradead.org/nvme into for-6.13/block Pull NVMe updates from Keith: "nvme updates for Linux 6.13 - Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin)" * tag 'nvme-6.13-2024-11-21' of git://git.infradead.org/nvme: nvme: tuning pr code by using defined structs and macros nvme: introduce change ptpl and iekey definition nvme-fabrics: fix kernel crash while shutting down controller Revert "nvme: make keep-alive synchronous operation" nvme-pci: use sgls for all user requests if possible nvme: define the remaining used sgls constants nvme-pci: add support for sgl metadata nvme/multipath: Fix RCU list traversal to use SRCU primitive |
||
|
Linus Torvalds
|
2dde263d81 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WikACgkQnJ2qBz9k QNnZdwf9FfT95zhnNWk3ohNOh5BO0P/uTY2fNkQBDPLPY3Bi8nywPIjXYCDSOgX1 SBV0rakkWp+rVO1/qkg5J1mUvBoefzT7O17rG0LfRw3zjHPX+XeO+e3Xf/kPmJHJ 3fvN//VTZQ6uPcn8PWgLe8VVQqNXD3nlUrwz/JKaxyodsdm0ERej4QZjG6Cikotk aKuDPAnOiS37/lIFZGdJRca/rwJPwMekNt1SxVrnmin0/QfB/Uubba2+NNdQ+z3W SCA/26PK822T3ELB8BkfwpdINC17WUwDJlkC8qha/JRzDlxJC/ysr43fHn/7Adfb CthG8V4JDGm51jcC0qe0Yk2HV75U4A== =htHs -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "A couple of smaller random fsnotify fixes" * tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Fix ordering of iput() and watched_objects decrement fsnotify: fix sending inotify event with unexpected filename fanotify: allow reporting errors on failure to open fd fsnotify, lsm: Decouple fsnotify from lsm |
||
|
Linus Torvalds
|
c01f664e4c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY adWNOMGWdNNQXPFgGbL5yZwNZ64kRA== =Eq1B -----END PGP SIGNATURE----- Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
|
Linus Torvalds
|
597861d6cd |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WPcACgkQnJ2qBz9k QNkRXwgAlN2gbf1O2Df3NFl7CXt5jXhlvQ9UdA77F/j1YFL90kieVrHvQY1yManO +Z36nwWPTaigR7COuF9oFpCZsp6H1YY8yeqlATE+kZBFqSFQjFP8jpgZ/1JObs0M C2DeNibrhYm81FJhnetXyTnXifUv20Fa7xwHv5ULtZjPF0MY6ry4zqy+t4fE68Uq OhGyjwrTW2k1Dv36Nx6CAt3KOWvM5KPHVBpMu2frSRwNB7XBEfmfeCjqISjYccPl WzHsEQof7Re14GZOa9M6G/efLdXAiwFJF/w2BFCqcijLpjbBrHheEH8N9WBWoATd wJLt94PRTK2uJqc3jQ3tANR3gQO9Xg== =XneM -----END PGP SIGNATURE----- Merge tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and isofs updates from Jan Kara: "Fix a memory leak in isofs and a cleanup of includes in quota" * tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: dquot.c: get rid of include ../internal.h isofs: avoid memory leak in iocharset |
||
|
Linus Torvalds
|
2edc8f933d |
New xfs code for 6.13
* convert perag to use xarrays * create a new generic allocation group structure * Add metadata inode dir trees * Create in-core rt allocation groups * Shard the RT section into allocation groups * Persist quota options with the enw metadata dir tree * Enable quota for RT volumes * Enable metadata directory trees * Some bugfixes Signed-off-by: Carlos Maiolino <cem@kernel.org> -----BEGIN PGP SIGNATURE----- iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZzyNwAAKCRBGdaER5Qtf psV3AYCncK/pVhFfKQSFbnCvgPSoAe7N9n0Wt5gmjy0Ill2mbQXVl9ADXkH6a015 gcGM3t4BgIHLJQndL/Uz+3a0L5IriEb9QkAfzmx8t3vjiRBzBe3WfywEx9Yt7kZe xbxEJ2HQpA== =3ngC -----END PGP SIGNATURE----- Merge tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Carlos Maiolino: "The bulk of this pull request is a major rework that Darrick and Christoph have been doing on XFS's real-time volume, coupled with a few features to support this rework. It does also includes some bug fixes. - convert perag to use xarrays - create a new generic allocation group structure - add metadata inode dir trees - create in-core rt allocation groups - shard the RT section into allocation groups - persist quota options with the enw metadata dir tree - enable quota for RT volumes - enable metadata directory trees - some bugfixes" * tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (146 commits) xfs: port ondisk structure checks from xfs/122 to the kernel xfs: separate space btree structures in xfs_ondisk.h xfs: convert struct typedefs in xfs_ondisk.h xfs: enable metadata directory feature xfs: enable realtime quota again xfs: update sb field checks when metadir is turned on xfs: reserve quota for realtime files correctly xfs: create quota preallocation watermarks for realtime quota xfs: report realtime block quota limits on realtime directories xfs: persist quota flags with metadir xfs: advertise realtime quota support in the xqm stat files xfs: scrub quota file metapaths xfs: fix chown with rt quota xfs: use metadir for quota inodes xfs: refactor xfs_qm_destroy_quotainos xfs: use rtgroup busy extent list for FITRIM xfs: implement busy extent tracking for rtgroups xfs: port the perag discard code to handle generic groups xfs: move the min and max group block numbers to xfs_group xfs: adjust min_block usage in xfs_verify_agbno ... |
||
|
Linus Torvalds
|
90a19b744d |
Changes since last update:
- Add SEEK_{DATA,HOLE} support;
- Free redundant pclusters if no cached compressed data is valid;
- Add sysfs entry to drop internal caches;
- Several bugfixes & cleanups.
-----BEGIN PGP SIGNATURE-----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=CRuc
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"There is no outstanding feature for this cycle. The most useful
changes are SEEK_{DATA,HOLE} support and some decompression
micro-optimization. Other than those, there are some bugfixes and
cleanups as usual:
- Add SEEK_{DATA,HOLE} support
- Free redundant pclusters if no cached compressed data is valid
- Add sysfs entry to drop internal caches
- Several bugfixes & cleanups"
* tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: handle NONHEAD !delta[1] lclusters gracefully
erofs: clarify direct I/O support
erofs: fix blksize < PAGE_SIZE for file-backed mounts
erofs: get rid of `buf->kmap_type`
erofs: fix file-backed mounts over FUSE
erofs: simplify definition of the log functions
erofs: add sysfs node to drop internal caches
erofs: free pclusters if no cached folio is attached
erofs: sunset `struct erofs_workgroup`
erofs: move erofs_workgroup operations into zdata.c
erofs: get rid of erofs_{find,insert}_workgroup
erofs: add SEEK_{DATA,HOLE} support
|
||
Guixin Liu
|
029cc98dec |
nvme: tuning pr code by using defined structs and macros
All the modifications are simply to make the code more readable, and this patch does not include any functional changes. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Guixin Liu
|
7d2f9f870f |
nvme: introduce change ptpl and iekey definition
This is for the next tuning pr code more readble patch, make linux/nvme.h's changes separately. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
Paul Aurich
|
a9685b409a |
smb: prevent use-after-free due to open_cached_dir error paths
If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) Cc: stable@vger.kernel.org Signed-off-by: Paul Aurich <paul@darkrain42.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paul Aurich
|
7afb867336 |
smb: Don't leak cfid when reconnect races with open_cached_dir
open_cached_dir() may either race with the tcon reconnection even before
compound_send_recv() or directly trigger a reconnection via
SMB2_open_init() or SMB_query_info_init().
The reconnection process invokes invalidate_all_cached_dirs() via
cifs_mark_open_files_invalid(), which removes all cfids from the
cfids->entries list but doesn't drop a ref if has_lease isn't true. This
results in the currently-being-constructed cfid not being on the list,
but still having a refcount of 2. It leaks if returned from
open_cached_dir().
Fix this by setting cfid->has_lease when the ref is actually taken; the
cfid will not be used by other threads until it has a valid time.
Addresses these kmemleaks:
unreferenced object 0xffff8881090c4000 (size 1024):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 32 bytes):
00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........".......
00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O.....
backtrace (crc 6f58c20f):
[<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350
[<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881044fdcf8 (size 8):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 8 bytes):
00 cc cc cc cc cc cc cc ........
backtrace (crc 10c106a9):
[<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480
[<ffffffff8b7d7256>] kstrdup+0x36/0x60
[<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
And addresses these BUG splats when unmounting the SMB filesystem:
BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100
Modules linked in:
CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:umount_check+0xd0/0x100
Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41
RSP: 0018:ffff88811cc27978 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40
RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3
R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08
R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0
FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0
Call Trace:
<TASK>
d_walk+0x6a/0x530
shrink_dcache_for_umount+0x6a/0x200
generic_shutdown_super+0x52/0x2a0
kill_anon_super+0x22/0x40
cifs_kill_sb+0x159/0x1e0
deactivate_locked_super+0x66/0xe0
cleanup_mnt+0x140/0x210
task_work_run+0xfb/0x170
syscall_exit_to_user_mode+0x29f/0x2b0
do_syscall_64+0xa1/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f23bfb93ae7
Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffee9138598 EFLAGS: 00000246 ORIG_RAX: 0000000000000050
RAX: 0000000000000000 RBX: 0000558f1803e9a0 RCX: 00007f23bfb93ae7
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000558f1803e9a0
RBP: 0000558f1803e600 R08: 0000000000000007 R09: 0000558f17fab610
R10: d91d5ec34ab757b0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000015 R15: 0000000000000000
</TASK>
irq event stamp: 1163486
hardirqs last enabled at (1163485): [<ffffffffac98d344>] _raw_spin_unlock_irqrestore+0x34/0x60
hardirqs last disabled at (1163486): [<ffffffffac97dcfc>] __schedule+0xc7c/0x19a0
softirqs last enabled at (
|
||
Paulo Alcantara
|
0812340811 |
smb: client: handle max length for SMB symlinks
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
Paulo Alcantara
|
9f544d26b1 |
smb: client: get rid of bounds check in SMB2_ioctl_init()
smb2_set_next_command() no longer squashes request iovs into a single iov, so the bounds check can be dropped. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
bc925c1216 |
smb: client: improve compound padding in encryption
After commit
|
||
Steve French
|
9ed9d83a51 |
smb3: request handle caching when caching directories
This client was only requesting READ caching, not READ and HANDLE caching in the LeaseState on the open requests we send for directories. To delay closing a handle (e.g. for caching directory contents) we should be requesting HANDLE as well as READ (as we already do for deferred close of files). See MS-SMB2 3.3.1.4 e.g. Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Pali Rohár
|
0d6b0d2e38 |
cifs: Recognize SFU char/block devices created by Windows NFS server on Windows Server <<2012
Windows NFS server versions on Windows Server older than 2012 release use for storing char and block devices modified SFU format, not compatible with the original SFU. Windows NFS server on Windows Server 2012 and new versions use different format (reparse points), not related to SFU-style. SFU / SUA / Interix subsystem stores the major and major numbers as pair of 64-bit integer, but Windows NFS server stores as pair of 32-bit integers. Which makes char and block devices between Windows NFS server <<2012 and Windows SFU/SUA/Interix subsytem incompatible. So improve Linux SMB client. When SFU mode is enabled (mount option -o sfu is specified) then recognize also these kind of char and block devices and its major and minor numbers, which are used by Windows Server versions older than 2012. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Ritvik Budhiraja
|
db363b0a1d |
CIFS: New mount option for cifs.upcall namespace resolution
In the current implementation, the SMB filesystem on a mount point can trigger upcalls from the kernel to the userspace to enable certain functionalities like spnego, dns_resolution, amongst others. These upcalls usually either happen in the context of the mount or in the context of an application/user. The upcall handler for cifs, cifs.upcall already has existing code which switches the namespaces to the caller's namespace before handling the upcall. This behaviour is expected for scenarios like multiuser mounts, but might not cover all single user scenario with services such as Kubernetes, where the mount can happen from different locations such as on the host, from an app container, or a driver pod which does the mount on behalf of a different pod. This patch introduces a new mount option called upcall_target, to customise the upcall behaviour. upcall_target can take 'mount' and 'app' as possible values. This aids use cases like Kubernetes where the mount happens on behalf of the application in another container altogether. Having this new mount option allows the mount command to specify where the upcall should happen: 'mount' for resolving the upcall to the host namespace, and 'app' for resolving the upcall to the ns of the calling thread. This will enable both the scenarios where the Kerberos credentials can be found on the application namespace or the host namespace to which just the mount operation is "delegated". Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com> Reviewed-by: Bharath S M <bharathsm@microsoft.com> Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Dan Carpenter
|
7a2158b73c |
smb/client: Prevent error pointer dereference
The cifs_sb_tlink() function can return error pointers, but this code
dereferences it before checking for error pointers. Re-order the code
to fix that.
Fixes: 0f9b6b045bb2 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
Ralph Boehme
|
d413eabff1 |
fs/smb/client: implement chmod() for SMB3 POSIX Extensions
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
Paul Aurich
|
128630e1db |
smb: cached directories can be more than root file handle
Update this log message since cached fids may represent things other
than the root of a mount.
Fixes:
|
||
|
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4
9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL
wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/
vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX
jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF
b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v
kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie
BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl
lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u
Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx
eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf
THcvVM+bupEZ
=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
Chao Yu
|
3fc5d5a182 |
f2fs: fix to shrink read extent node in batches
We use rwlock to protect core structure data of extent tree during its shrink, however, if there is a huge number of extent nodes in extent tree, during shrink of extent tree, it may hold rwlock for a very long time, which may trigger kernel hang issue. This patch fixes to shrink read extent node in batches, so that, critical region of the rwlock can be shrunk to avoid its extreme long time hold. Reported-by: Xiuhong Wang <xiuhong.wang@unisoc.com> Closes: https://lore.kernel.org/linux-f2fs-devel/20241112110627.1314632-1-xiuhong.wang@unisoc.com/ Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Chao Yu
|
81520c684c |
f2fs: print message if fscorrupted was found in f2fs_new_node_page()
If fs corruption occurs in f2fs_new_node_page(), let's print more information about corrupted metadata into kernel log. Meanwhile, it updates to record ERROR_INCONSISTENT_NAT instead of ERROR_INVALID_BLKADDR if blkaddr in nat entry is not NULL_ADDR which means nat bitmap and nat entry is inconsistent. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Matthew Brost
|
ed31ba0aa7 |
drm/xe: Mark preempt fence workqueue as reclaim
Preempt fences are in the path of reclaim, and we signal these fences in the preempt workqueue. With that, we need to mark the preempt fence workqueue with reclaim so that this workqueue can make forward progress during reclaim. Fixes: |
||
Nirmoy Das
|
37a1cf288e |
drm/xe/ufence: Wake up waiters after setting ufence->signalled
If a previous ufence is not signalled, vm_bind will return -EBUSY. Delaying the modification of ufence->signalled can cause issues if the UMD reuses the same ufence so update ufence->signalled before waking up waiters. Cc: Matthew Brost <matthew.brost@intel.com> Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3233 Fixes: |
||
Sheng Yong
|
f88c7904b5 |
f2fs: clear SBI_POR_DOING before initing inmem curseg
SBI_POR_DOING can be cleared after recovery is completed, so that changes made before recovery can be persistent, and subsequent errors can be recorded into cp/sb. Signed-off-by: Song Feng <songfeng@oppo.com> Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com> Signed-off-by: Sheng Yong <shengyong@oppo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Sheng Yong
|
1015035609 |
f2fs: fix changing cursegs if recovery fails on zoned device
Fsync data recovery attempts to check and fix write pointer consistency of cursegs and all other zones. If the write pointers of cursegs are unaligned, cursegs are changed to new sections. If recovery fails, zone write pointers are still checked and fixed, but the latest checkpoint cannot be written back. Additionally, retry- mount skips recovery and rolls back to reuse the old cursegs whose zones are already finished. This can lead to unaligned write later. This patch addresses the issue by leaving writer pointers untouched if recovery fails. When retry-mount is performed, cursegs and other zones are checked and fixed after skipping recovery. Signed-off-by: Song Feng <songfeng@oppo.com> Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com> Signed-off-by: Sheng Yong <shengyong@oppo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Daeho Jeong
|
a35749b1ed |
f2fs: adjust unusable cap before checkpoint=disable mode
The unusable cap value must be adjusted before checking whether checkpoint=disable is feasible. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |