The subsequent calculation of port_rate = speed * 1000 * BYTES_PER_KBIT,
where the BYTES_PER_KBIT is of type LL, may cause an overflow.
At least when speed = SPEED_20000, the expression to the left of port_rate
will be greater than INT_MAX.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Link: https://patch.msgid.link/20241013124529.1043-1-esalomatkina@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If:
1) the user requested USO, but
2) there is not enough payload for GSO to kick in, and
3) the egress device doesn't offer checksum offload, then
we want to compute the L4 checksum in software early on.
In the case when we are not taking the GSO path, but it has been requested,
the software checksum fallback in skb_segment doesn't get a chance to
compute the full checksum, if the egress device can't do it. As a result we
end up sending UDP datagrams with only a partial checksum filled in, which
the peer will discard.
Fixes: 10154dbded ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the Marvell datasheet the 88E6361 has two VTU pages
(4k VIDs per page) so the max_vid should be 8191, not 4095.
In the current implementation mv88e6xxx_vtu_walk() gives unexpected
results because of this error. I verified that mv88e6xxx_vtu_walk()
works correctly on the MV88E6361 with this patch in place.
Fixes: 12899f2998 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.ca
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc394 ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 1202cdd665 ("Remove DECnet support from kernel"),
NEIGH_DN_TABLE is no longer used.
MPLS has implicit dependency on it in nla_put_via(), but nla_get_via()
does not support DECnet.
Let's remove NEIGH_DN_TABLE.
Now, neigh_tables[] has only 2 elements and no extra iteration
for DECnet in many places.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014235216.10785-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CP_SMMU_TABLE_UPDATE _should_ be waiting for idle, but on some
devices (x1-85, possibly others), it seems to pass that barrier while
there are still things in the event completion FIFO waiting to be
written back to memory.
Work around that by adding a fence wait before context switch. The
CP_EVENT_WRITE that writes the fence is the last write from a submit,
so seeing this value hit memory is a reliable indication that it is
safe to proceed with the context switch.
v2: Only emit CP_WAIT_TIMESTAMP on a7xx, as it is not supported on a6xx.
Conversely, I've not been able to reproduce this issue on a6xx, so
hopefully it is limited to a7xx, or perhaps just certain a7xx
devices.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/63
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241014145901.48940-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The page containing VDSO time data is swapped with the one containing
TIME namespace data when a process uses a non-root time namespace.
For other data like powerpc specific data and RNG data, it means
tracking whether time namespace is the root one or not to know which
page to use.
Simplify the logic behind by moving time data out of first data page
so that the first data page which contains everything else always
remains the first page. Time data is in the second or third page
depending on selected time namespace.
While we are playing with get_datapage macro, directly take into
account the data offset inside the macro instead of adding that offset
afterwards.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/0557d3ec898c1d0ea2fc59fa8757618e524c5d94.1727858295.git.christophe.leroy@csgroup.eu
cxgb3_alloc_stid() and cxgb3_free_stid() have been unused since
commit 30e0f6cf5a ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module
from kernel")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241013012946.284721-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dr. David Alan Gilbert says:
====================
cxgb4: Deadcode removal
This is a bunch of deadcode removal in cxgb4.
It's all complete function removal rather than any actual change to
logic.
Build and boot tested, but I don't have the hardware to test
the actual card.
====================
Link: https://patch.msgid.link/20241013203831.88051-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t4_free_ofld_rxqs() has been unused since
commit 0fbc81b3ad ("chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources
dynamically for all cxgb4 ULD's")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-7-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxgb4_l2t_alloc_switching() has been unused since it was added in
commit f7502659ce ("cxgb4: Add API to alloc l2t entry; also update
existing ones")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxgb4_iscsi_init() has been unused since 2016's commit
5999299f1c ("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxgb4_get_srq_entry() has been unused since 2018's commit
e47094751d ("cxgb4: Add support to initialise/read SRQ entries")
which added it.
Remove it.
Note: I'm a bit suspicious whether any of the srq code in there
actually does anything useful; without this get I can't see anything
that reads the data, so perhaps the whole thing should go?
But that however would remove one of the opcode handlers, and I have
no way to test that.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxgb4_alloc_raw_mac_filt() and cxgb4_free_raw_mac_filt() have been
unused since they were added in 2019 commit
5fab51581f ("cxgb4: Add MPS TCAM refcounting for raw mac filters")
Remove them.
This was also the last use of cxgb4_mps_ref_dec().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxgb4_alloc_encap_mac_filt() and cxgb4_free_encap_mac_filt() have been
unused since
commit 28b3870578 ("cxgb4: Re-work the logic for mps refcounting")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since SLOB was removed and since
commit 6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241013201704.49576-14-Julia.Lawall@inria.fr
This is a real driver and dev_err_probe will hide the distinction between
EPROBE_DEFER and other errors automatically, so there is no need to
open-code this.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240906082511.2963890-4-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The main documentation block seems to be from a time before the driver
handled sleeping and non-sleeping gpios and with that change it seems
updating the doc was overlooked. So do that now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240906082511.2963890-3-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In contrast to fixed clocks that are described as ungateable, boards
sometimes use additional oscillators for things like PCIe reference
clocks, that need actual supplies to get enabled and enable-gpios to be
toggled for them to work.
This adds a binding for such oscillators that are not configurable
themself, but need to handle supplies for them to work.
In schematics they often can be seen as
----------------
Enable - | 100MHz,3.3V, | - VDD
| 3225 |
GND - | | - OUT
----------------
or similar. The enable pin might be separate but can also just be tied
to the vdd supply, hence it is optional in the binding.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240906082511.2963890-2-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The documentation which tries to give advices how to properly inserting
delays or sleeps is outdated. The file name is 'timers-howto.rst' which
might be misleading as it is only about delay and sleep mechanisms and not
how to use timers.
Update the documentation by integrating the important parts from the
related function descriptions and move it all into a self explaining file
with the name "delay_sleep_functions.rst".
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-15-dc8b907cb62f@linutronix.de
anysee driver was transformed to use usbv2 years ago. The comments in
anysee_ctrl_msg() still are referencing the old interfaces where msleep()
was used. The v2 interfaces also changed over the years and with commit
1162c7b383 ("[media] dvb_usb_v2: refactor dvb_usbv2_generic_rw()") the
usage of msleep() was gone anyway.
Remove FIXME comment and update also comment before call to
dvb_usbv2_generic_rw_locked().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-14-dc8b907cb62f@linutronix.de
When commit 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
was introduced, documentation about proper usage of sleep related functions
was outdated.
The commit message references the usage of a HZ=100 system. When using a
20ms sleep duration on such a system and therefore using msleep(), the
possible additional slack will be +10ms.
When the system is configured with HZ=100 the granularity of a jiffy and of
a bucket of the lowest timer wheel level is 10ms. To make sure a timer will
not expire early (when queueing of the timer races with an concurrent
update of jiffies), timers are always queued into the next bucket. This is
the reason for the maximal possible slack of 10ms.
fsleep() limits the maximal possible slack to 25% by making threshold
between usleep_range() and msleep() HZ dependent. As soon as the accuracy
of msleep() is sufficient, the less expensive timer list timer based
sleeping function is used instead of the more expensive hrtimer based
usleep_range() function. The udelay() will not be used in this specific
usecase as the lowest sleep length is larger than 1 millisecond.
Use fsleep() directly instead of using an own heuristic for the best
sleeping mechanism to use.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-13-dc8b907cb62f@linutronix.de
Function descriptions in iopoll.h, regmap.h, phy.h and sound/soc/sof/ops.h
copied all the same outdated documentation about sleep/delay function
limitations. In those comments, the generic (and still outdated) timer
documentation file is referenced.
As proper function descriptions for used delay and sleep functions are in
place, simply update the descriptions to reference to them. While at it fix
missing colon after "Returns" in function description and move return value
description to the end of the function description.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> # for phy.h
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-12-dc8b907cb62f@linutronix.de
checkpatch.pl checks for several things related to sleep and delay
functions. In all warnings the outdated documentation is referenced. Also
in checkpatch kernel documentation the outdated documentation is
referenced.
Replace the links to the outdated documentation with links to the function
description.
Note: Update of the outdated checkpatch checks is done in a second step.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-10-dc8b907cb62f@linutronix.de
There is a warning in checkpatch script that triggers, when min and max
arguments of usleep_range_state() are in reverse order. This check does
only cover callsites which uses constants. Add this check into the code as
a WARN_ON_ONCE() to also cover callsites not using constants and fix the
mis-usage by resetting the delta to 0.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-9-dc8b907cb62f@linutronix.de
The upper bound for usleep_range_idle() was taken from the outdated
documentation. As a recommondation for the upper bound of usleep_range()
depends on HZ configuration it is not possible to hard code it.
Use the define "USLEEP_RANGE_UPPER_BOUND" instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-8-dc8b907cb62f@linutronix.de
fsleep() simply implements the recommendations of the outdated
documentation in "Documentation/timers/timers-howto.rst". This should be a
user friendly interface to choose always the best timeout function
approach:
- udelay() for very short sleep durations shorter than 10 microseconds
- usleep_range() for sleep durations until 20 milliseconds
- msleep() for the others
The actual implementation has several problems:
- It does not take into account that HZ resolution also has an impact on
granularity of jiffies and has also an impact on the granularity of the
buckets of timer wheel levels. This means that accuracy for the timeout
does not have an upper limit. When executing fsleep(20000) on a HZ=100
system, the possible additional slack will be 50% as the granularity of
the buckets in the lowest level is 10 milliseconds.
- The upper limit of usleep_range() is twice the requested timeout. When no
other interrupts occur in this range, the maximum value is used. This
means that the requested sleep length has then an additional delay of
100%.
Change the thresholds for the decisions in fsleep() to make sure the
maximum slack which is added to the sleep duration is 25%.
Note: Outdated documentation will be updated in a followup patch.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-7-dc8b907cb62f@linutronix.de
udelay() as well as ndelay() are defines and no functions and are using
constants to be able to transform a sleep time into loops and to prevent
too long udelays/ndelays. There was a compiler error with non-const 8 bit
arguments which was fixed by commit a87e553fab ("asm-generic: delay.h fix
udelay and ndelay for 8 bit args"). When using a function, the non-const 8
bit argument is type casted and the problem would be gone.
Transform udelay() and ndelay() into proper functions, remove the no longer
and confusing division, add defines for the magic values and add some
explanations as well.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-6-dc8b907cb62f@linutronix.de
A lot of commonly used functions for inserting a sleep or delay lack a
proper function description. Add function descriptions to all of them to
have important information in a central place close to the code.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-5-dc8b907cb62f@linutronix.de
usleep_idle_range() is a variant of usleep_range(). Both are using
usleep_range_state() as a base. To be able to find all the related
functions in one go, rename it usleep_idle_range() to usleep_range_idle().
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-4-dc8b907cb62f@linutronix.de
schedule_timeout*() functions do not have proper kernel-doc formatted
function descriptions. schedule_hrtimeout() and schedule_hrtimeout_range()
have a almost identical description.
Add missing function descriptions. Remove copy of function description and
add a pointer to the existing description instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-3-dc8b907cb62f@linutronix.de
All schedule_timeout() and *sleep*() related functions are interfaces on
top of timer list timers and hrtimers to add a sleep to the code. As they
are built on top of the timer list timers and hrtimers, the [hr]timer
interfaces are already used except when queuing the timer in
schedule_timeout(). But there exists the appropriate interface add_timer()
which does the same job with an extra check for an already pending timer.
Split all those functions as they are into a separate file and use
add_timer() instead of __mod_timer() in schedule_timeout().
While at it fix minor formatting issues and a multi line printk function
call in schedule_timeout().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-2-dc8b907cb62f@linutronix.de
The VDSO implementation includes headers from outside of the
vdso/ namespace.
Introduce vdso/page.h to make sure that the generic library
uses only the allowed namespace.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com
Fault is currently of type u32 and with the introduction of the
generalized vdso/page.h we trigger the error below:
drivers/gpu/drm/i915/gt/intel_gt_print.h:29:36: error: format ‘%lx’ expects
argument of type ‘long unsigned int’, but argument 6 has type ‘u32’ {aka
‘unsigned int’} [-Werror=format=]
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~~
include/drm/drm_print.h:424:39: note: in definition of macro ‘drm_dev_dbg’
424 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
include/drm/drm_print.h:524:33: note: in expansion of macro ‘drm_dbg_driver’
524 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
linux/drivers/gpu/drm/i915/gt/intel_gt_print.h:29:9: note: in expansion of macro
‘drm_dbg’
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~
drivers/gpu/drm/i915/gt/intel_gt.c:310:25: note: in expansion of macro ‘gt_dbg’
310 | gt_dbg(gt, "Unexpected fault\n"
| ^~~~~~
This happens because the type of PAGE_MASK depends on the architecture.
Prevent the compilation error changing the 'fault' type to unsigned
long.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20241014151340.1639555-2-vincenzo.frascino@arm.com
Add node for the Interrupt Control Unit IP found on the Renesas
RZ/V2H(P) SoC, and modify the pinctrl node as its interrupt parent
is the ICU node.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20241009230817.798582-4-fabrizio.castro.jz@renesas.com
Add driver for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU).
This driver supports the external interrupts NMI, IRQn, and TINTn.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241009230817.798582-3-fabrizio.castro.jz@renesas.com
Add DT bindings for the Renesas RZ/V2H(P) Interrupt Controller.
Also add macros for the NMI and IRQ0-15 interrupts which map the
SPI0-16 interrupts on the RZ/V2H(P) SoC so that they can be
used in the first cell of the interrupt specifiers.
For the second cell of the interrupt specifier, since NMI, IRQn
and TINTn support different types of interrupts between themselves,
add helper macros to make it easier for the user to work out what's
available.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20241009230817.798582-2-fabrizio.castro.jz@renesas.com
