With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
The deadline server code moved one of the start_hrtick_dl() calls
but dropped the dl specific hrtick_enabled check. This causes hrticks
to get armed even when sched_feat(HRTICK_DL) is false. Fix it.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20241004123729.460668-1-pauld@redhat.com
TI's J7200 SoC supports USXGMII mode with the CPSW5G instance's MAC Port1.
Add USXGMII mode to the extra_modes member of J7200's SoC data.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010144845.2555983-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The COMMONONN bit suspends the phy when the port is put into a suspend
state. However when the phy is shared between host and device in dual
mode, this no longer works cleanly as there is no synchronization between
the two.
Fixes: 5095d045a9 ("phy: usb: Turn off phy when port is in suspend")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241010185344.859865-1-justin.chen@broadcom.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Power LUT (Look-up Table) register base was missing, also
add the bit define for sending serial LED data in reverse order,
and use the BIT() macro to define the bits in the control
register.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-4-cdb80780a555@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
This adds code to optionally read the width of the shift register
chain from the device tree and use it to set up the register
controlling the shifter hardware.
If the property is not present, the boot-time default is used so
existing device trees keep working as this is what they assume.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-3-cdb80780a555@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use scoped helpers and guards to handle DT node iterations
and spinlocks. This cuts some lines of code and eliminates
common mistakes (such as the missing of_node_put()).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-2-cdb80780a555@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM63138 family of serial LED controllers has a register
where we can set up bits for the shift registers. These are
the number of rounds the bits need to be shifted before all
bits have been shifted through the external shift registers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-1-cdb80780a555@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
During fuzz testing, the following issue was discovered:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30
_copy_to_iter+0x598/0x2a30
__skb_datagram_iter+0x168/0x1060
skb_copy_datagram_iter+0x5b/0x220
netlink_recvmsg+0x362/0x1700
sock_recvmsg+0x2dc/0x390
__sys_recvfrom+0x381/0x6d0
__x64_sys_recvfrom+0x130/0x200
x64_sys_call+0x32c8/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was stored to memory at:
copy_to_user_state_extra+0xcc1/0x1e00
dump_one_state+0x28c/0x5f0
xfrm_state_walk+0x548/0x11e0
xfrm_dump_sa+0x1e0/0x840
netlink_dump+0x943/0x1c40
__netlink_dump_start+0x746/0xdb0
xfrm_user_rcv_msg+0x429/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was created at:
__kmalloc+0x571/0xd30
attach_auth+0x106/0x3e0
xfrm_add_sa+0x2aa0/0x4230
xfrm_user_rcv_msg+0x832/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Bytes 328-379 of 732 are uninitialized
Memory access of size 732 starts at ffff88800e18e000
Data copied to user address 00007ff30f48aff0
CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Fixes copying of xfrm algorithms where some random
data of the structure fields can end up in userspace.
Padding in structures may be filled with random (possibly sensitve)
data and should never be given directly to user-space.
A similar issue was resolved in the commit
8222d5910d ("xfrm: Zero padding when dumping algos and encap")
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: c7a5899eb2 ("xfrm: redact SA secret with lockdown confidentiality")
Cc: stable@vger.kernel.org
Co-developed-by: Boris Tonofa <b.tonofa@ideco.ru>
Signed-off-by: Boris Tonofa <b.tonofa@ideco.ru>
Signed-off-by: Petr Vaganov <p.vaganov@ideco.ru>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Remove the old exar_ee_read() and associated helper functions.
Remove defines that are no longer needed after the switch to using the
eeprom_93cx6 driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/ed756c48965a95ce3384ebb7fe2441b4928b4510.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the custom 93cx6 EEPROM read functions with the eeprom_93cx6
driver. This removes duplicate code and improves code readability.
Replace exar_ee_read() calls with eeprom_93cx6_read() or
eeprom_93cx6_multiread().
Add "select EEPROM_93CX6" to config SERIAL_8250_EXAR to ensure
eeprom_93cx6 driver is also compiled when 8250_exar driver is selected.
Note: Old exar_ee_read() and associated functions are removed in next
patch in this series.
Link to mailing list discussion with Andy Shevchenko for reference.
Link: https://lore.kernel.org/linux-serial/Ztr5u2wEt8VF1IdI@black.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/1bf2214ae27130ca58b9e779c4d65a0e5db06fc1.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original commit message:
"
Use current sort mechanism but the real .se_cmp() just returns 0 so
that new columns "Predicted", "Abort" and "Cycles" are created in display
but actually these keys are not the sort keys.
For example:
Overhead Source:Line Symbol Shared Object Predicted Abort Cycles
........ ............ ........ ............. ......... ..... ......
38.25% div.c:45 [.] main div 97.6% 0 3
"
Update missed commit from series "perf report: Show branch flags/cycles
in --branch-history callgraph view" to apply to current repository so that
new columns described above are visible.
Link to original series:
https://lore.kernel.org/lkml/1477876794-30749-1-git-send-email-yao.jin@linux.intel.com/
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20241010184046.203822-1-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ensure parsing with and without PMU creates events with the expected
config values. This ensures the tool.json doesn't get out of sync with
tool_pmu_event enum.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use the regular PMU approaches with tool json events to reduce the
amount of special tool_pmu code - tool_pmu__config_terms and
tool_pmu__for_each_event_cb are removed. Some functions remain, like
tool_pmu__str_to_event, as conveniences to metricgroups. Add
tool_pmu__skip_event/tool_pmu__num_skip_events to handle the case that
tool json events shouldn't appear on certain architectures. This isn't
done in jevents.py due to complexity in the empty-pmu-events.c and
when all vendor json is built into the tool.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Introduce the notion of a common architecture/model that can be used
to find event tables for common PMUs like the tool PMU. By having tool
events be json standard PMU attribute configuration, descriptions,
etc. can be used and these routines are already optimized for things
like binary searching.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add the expr literals like "#smt_on" as tool events, this allows stat
events to give the values. On my laptop with hyperthreading enabled:
```
$ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true
Performance counter stats for 'true':
0 has_pmem
8 num_cores
16 num_cpus
16 num_cpus_online
1 num_dies
1 num_packages
1 smt_on
2,496,000,000 system_tsc_freq
0.001113637 seconds time elapsed
0.001218000 seconds user
0.000000000 seconds sys
```
And with hyperthreading disabled:
```
$ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true
Performance counter stats for 'true':
0 has_pmem
8 num_cores
16 num_cpus
8 num_cpus_online
1 num_dies
1 num_packages
0 smt_on
2,496,000,000 system_tsc_freq
0.000802115 seconds time elapsed
0.000000000 seconds user
0.000806000 seconds sys
```
As zero matters for these values, in stat-display
should_skip_zero_counter only skip the zero value if it is not the
first aggregation index.
The tool event implementations are used in expr but not evaluated as
events for simplicity. Also core_wide isn't made a tool event as it
requires command line parameters.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the events are associated with the tool PMU, rename the functions
to reflect this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To better reflect the events listed are from the tool PMU. Rename the
enum values from PERF_TOOL_* to TOOL_PMU__EVENT_*.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than treat tool events as a special kind of event, create a
tool only PMU where the events/aliases match the existing
duration_time, user_time and system_time events. Remove special
parsing and printing support for the tool events, but add function
calls for when PMU functions are called on a tool_pmu.
Move the tool PMU code in evsel into tool_pmu.c to better encapsulate
the tool event behavior in that file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Expose config_term_name as parse_events__term_type_str so that PMUs not
in pmu.c may access it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Hard coded terms like "config=10" are skipped by perf_pmu__config
assuming they were already applied to a perf_event_attr by parse
event's config_attr function. When doing a reverse number to name
lookup in perf_pmu__name_from_config, as the hardcoded terms aren't
applied the config value is incorrect leading to misses or false
matches. Fix this by adding a parameter to have perf_pmu__config apply
hardcoded terms too (not just in parse event's config_term_common).
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use ifs rather than ?: to avoid a large compound statement.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Drop the unnecessary "_sys" infix from the suspend PM ops.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Serial drivers should not be dropping characters themselves, but at
least drop the unused 'drop' parameter from the receive handler for now.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the unnecessary WARN() in case the TTY buffers are ever full in
favour of a rate limited dev_err() which doesn't kill the machine when
panic_on_warn is set.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The receiver is supposed to be enabled in the startup() callback and not
in set_termios() which is called also during console setup.
This specifically avoids accepting input before the port has been opened
(and interrupts enabled), something which can also break the GENI
firmware (cancel fails and after abort, the "stale" counter handling
appears to be broken so that later input is not processed until twelve
chars have been received).
There also does not appear to be any need to keep the receiver disabled
while updating the port settings.
Since commit 6f3c3cafb1 ("serial: qcom-geni: disable interrupts during
console writes") the calls to manipulate the secondary interrupts, which
were done without holding the port lock, can also lead to the receiver
being left disabled when set_termios() races with the console code (e.g.
when init opens the tty during boot). This can manifest itself as a
serial getty not accepting input.
The calls to stop and start rx in set_termios() can similarly race with
DMA completion and, for example, cause the DMA buffer to be unmapped
twice or the mapping to be leaked.
Fix this by only enabling the receiver during startup and while holding
the port lock to avoid racing with the console code.
Fixes: 6f3c3cafb1 ("serial: qcom-geni: disable interrupts during console writes")
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 6.3
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to wait for the DMA transfer to complete when cancelling the
rx command on stop_rx(). This specifically prevents the DMA completion
interrupt from firing after rx has been restarted, something which can
lead to an IOMMU fault and hosed rx when the interrupt handler unmaps
the DMA buffer for the new command:
qcom_geni_serial 988000.serial: serial engine reports 0 RX bytes in!
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x563
arm-smmu 15000000.iommu: FSYNR0 = 00210013 [S1CBNDX=33 WNR PLVL=3]
Bluetooth: hci0: command 0xfc00 tx timeout
Bluetooth: hci0: Reading QCA version information failed (-110)
Also add the missing state machine reset which is needed in case
cancellation fails.
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable@vger.kernel.org # 6.3
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A commit adding back the stopping of tx on port shutdown failed to add
back the locking which had also been removed by commit e83766334f
("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART
shutdown").
Holding the port lock is needed to serialise against the console code,
which may update the interrupt enable register and access the port
state.
Fixes: d8aca2f968 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown")
Fixes: 947cc4ecc0 ("serial: qcom-geni: fix soft lockup on sw flow control and suspend")
Cc: stable@vger.kernel.org # 6.3
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 35781d8356.
Hibernation is not supported on Qualcomm platforms with mainline
kernels yet a broken vendor implementation for the GENI serial driver
made it upstream.
This is effectively dead code that cannot be tested and should just be
removed, but if these paths were ever hit for an open non-console port
they would crash the machine as the driver would fail to enable clocks
during restore() (i.e. all ports would have to be closed by drivers and
user space before hibernating the system to avoid this as a comment in
the code hinted at).
The broken implementation also added a random call to enable the
receiver in the port setup code where it does not belong and which
enables the receiver prematurely for console ports.
Fixes: 35781d8356 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Cc: stable@vger.kernel.org # 6.2
Cc: Aniket Randive <quic_arandive@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The polled console (KGDB/KDB) implementation must not call port setup
unconditionally as the port may already be in use by the console or a
getty.
Only make sure that the receiver is enabled, but do not enable any
device interrupts.
Fixes: d8851a96ba ("tty: serial: qcom-geni-serial: Add a poll_init() function")
Cc: stable@vger.kernel.org # 6.4
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
color_fwrite_lines() was added by 2009's commit
8fc0321f1a ("perf_counter tools: Add color terminal output support")
but has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241009003938.254936-1-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When sending data using DMA at high baudrate (4 Mbdps in local test case) to
a device with small RX buffer which keeps asserting RTS after every received
byte, it is possible that the iMX UART driver would not recognize the falling
edge of RTS input signal and get stuck, unable to transmit any more data.
This condition happens when the following sequence of events occur:
- imx_uart_mctrl_check() is called at some point and takes a snapshot of UART
control signal status into sport->old_status using imx_uart_get_hwmctrl().
The RTSS/TIOCM_CTS bit is of interest here (*).
- DMA transfer occurs, the remote device asserts RTS signal after each byte.
The i.MX UART driver recognizes each such RTS signal change, raises an
interrupt with USR1 register RTSD bit set, which leads to invocation of
__imx_uart_rtsint(), which calls uart_handle_cts_change().
- If the RTS signal is deasserted, uart_handle_cts_change() clears
port->hw_stopped and unblocks the port for further data transfers.
- If the RTS is asserted, uart_handle_cts_change() sets port->hw_stopped
and blocks the port for further data transfers. This may occur as the
last interrupt of a transfer, which means port->hw_stopped remains set
and the port remains blocked (**).
- Any further data transfer attempts will trigger imx_uart_mctrl_check(),
which will read current status of UART control signals by calling
imx_uart_get_hwmctrl() (***) and compare it with sport->old_status .
- If current status differs from sport->old_status for RTS signal,
uart_handle_cts_change() is called and possibly unblocks the port
by clearing port->hw_stopped .
- If current status does not differ from sport->old_status for RTS
signal, no action occurs. This may occur in case prior snapshot (*)
was taken before any transfer so the RTS is deasserted, current
snapshot (***) was taken after a transfer and therefore RTS is
deasserted again, which means current status and sport->old_status
are identical. In case (**) triggered when RTS got asserted, and
made port->hw_stopped set, the port->hw_stopped will remain set
because no change on RTS line is recognized by this driver and
uart_handle_cts_change() is not called from here to unblock the
port->hw_stopped.
Update sport->old_status in __imx_uart_rtsint() accordingly to make
imx_uart_mctrl_check() detect such RTS change. Note that TIOCM_CAR
and TIOCM_RI bits in sport->old_status do not suffer from this problem.
Fixes: ceca629e0b ("[ARM] 2971/1: i.MX uart handle rts irq")
Cc: stable <stable@kernel.org>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241002184133.19427-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
font.data may not initialize all memory spaces depending on the implementation
of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it
is safest to modify it to initialize the allocated memory space to 0, and it
generally does not affect the overall performance of the system.
Cc: stable@vger.kernel.org
Reported-by: syzbot+955da2d57931604ee691@syzkaller.appspotmail.com
Fixes: 05e2600cb0 ("VT: Bump font size limitation to 64x128 pixels")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20241010174619.59662-1-aha310510@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implements the necessary callbacks to switch the imx console driver to
perform as an nbcon console.
Add implementations for the nbcon consoles (write_atomic, write_thread,
driver_enter, driver_exit) and add CON_NBCON to the initial flags.
The legacy code is kept in order to easily switch back to legacy mode
by defining CONFIG_SERIAL_IMX_LEGACY_CONSOLE.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-serial-imx-nbcon-v3-1-4c627302335b@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx7ulp/imx8ulp/imx8qxp lpuart IP support 7-bits format and have no
limitation on parity when CS7. Remove this limitation and add 7-bits
format support on imx7ulp/imx8ulp/imx8qxp.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20241008094418.439706-1-ziniu.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When specifying flag SER_RS485_RTS_ON_SEND in RS485 configuration,
we get the following warning after commit 4afeced55b ("serial: core:
fix sanitizing check for RTS settings"):
invalid RTS setting, using RTS_AFTER_SEND instead
This results in SER_RS485_RTS_AFTER_SEND being set and the
driver always write to the register field SC16IS7XX_EFCR_RTS_INVERT_BIT,
which breaks some hardware using these chips.
The hardware supports both RTS_ON_SEND and RTS_AFTER_SEND modes, so fix
this by announcing support for RTS_ON_SEND.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Suggested-by: Konstantin Pugin <ria.freelander@gmail.com>
Link: https://lore.kernel.org/lkml/20240422133219.2710061-2-ria.freelander@gmail.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20241007162716.3122912-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes several typos in the comments within the tty/8250
directory to improve readability and code documentation.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240929100931.530620-1-yujiaoliang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not obvious from the first glance that the list of the CTI EEPROM
offsets covers three different models, let's group them accordingly for
better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240920154430.3323820-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit ebd2c8f6d2 ("serial: kill off uart_info") has
removed uart_info, the uart_info declaration looks lonely,
let it go.
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240920053423.1373354-1-siyanteng@cqsoftware.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rockchip RK3528 comes with a snps-dw-apb-uart compatible UART. Document
it in dt-bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20240919111413.45413-4-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.
Fixes: d50f974c4f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/820c639b9e22fe037730ed44d1b044cdb6d28b75.1726480384.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comments regarding status of port.lock on internal functions is useful when
reviewing correct handling of registers that must be protected by this
lock.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-serial-imx-lockfix-v1-2-4d102746c89d@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/tty/serial to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241007205803.444994-7-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
