Default CMA size is too small for HDMI output and VPU usage. Increase the
default size by providing a CMA memory area.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Usage of devm_alloc_etherdev_mqs() conflicts with
am65_cpsw_nuss_cleanup_ndev() as the same struct net_device instances
get unregistered twice. Switch to alloc_etherdev_mqs() and make sure
am65_cpsw_nuss_cleanup_ndev() unregisters and frees those net_device
instances properly.
With this, it is finally possible to rmmod the driver without oopsing
the kernel.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <roger@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In am65_cpsw_nuss_remove(), move the call to am65_cpsw_unregister_devlink()
after am65_cpsw_nuss_cleanup_ndev() to avoid triggering the
WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET) in
devl_port_unregister(). Makes it coherent with usage in
m65_cpsw_nuss_register_ndevs()'s cleanup path.
Fixes: 58356eb31d ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add dbi2 and iatu reg for i.MX8MM PCIe EP.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130 ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8MM PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add dbi2 and iatu reg for i.MX8MP PCIe EP.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130 ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8MP PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add dbi2 and iatu reg for i.MX8MQ PCIe EP.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130 ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8MQ PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make updating the descriptor flags when reconfiguring from user-space
consistent with the rest of the codebase: read the current state
atomically, update it according to user's instructions and write it back
atomically as well.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-3-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We currently iterate over the descriptors owned by the GPIO device we're
adding twice with the first loop just setting the gdev pointer. It's not
used anywhere between this and the second loop so just drop the first
one and move the assignment to the second.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-2-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We should only use v2 defines for line state change events. They will get
tranlated to v1 if needed by gpio_v2_line_info_changed_to_v1().
This isn't really a functional change as they have the same values but
let's do it for consistency.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-1-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240930144804.75068-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For better readability don't repeatedly dereference pdev->dev but
instead store the address of the embedded struct device in a local
variable in probe().
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240930144804.75068-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't really depend on gpiolib-of being built and can be
compiled without it.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240930144804.75068-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Bail out in probe if getting the optional GPIO returns an error. Bail
out in the test early if the optional GPIO is not present, otherwise the
timeout errno is misleading.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add support for retrieving the device map from Focusrite Scarlett 4th
Gen and Vocaster devices. The device map is a base64-encoded,
zlib-compressed JSON description of the device's capabilities and
configuration.
This patch adds:
- a has_devmap field to the scarlett2_device_info struct
- a /proc/asound/cardX/device-map.json.zz.b64 file when supported
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/e86380c6792460d8d05a8ecc37c9ebd072be25a5.1727971672.git.g@b4.vu
The current handling of linked channels for the 4th Gen 2i2 and 4i4
models is more complicated than necessary. The firmware has a link
control for each channel, and the channel selection can be any channel
regardless of the channel link status. The driver can therefore be
simplified by having it reflect the controls presented by the
firmware, and complexities related to trying to reflect the channel
link status in the Input Select Capture Enum control are not
necessary.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/9bf8a2ab35f243820d066319b7d407b45a61281b.1727971672.git.g@b4.vu
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Link: https://lore.kernel.org/r/20240930091111.32010-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Included solution with ALC287/CS35L41 did not cover full function, 14
inch code blocked. Forcing output for treble/bass speaker to connection
0x02, setting pin configs for LEDs and re-powering amp and calling
fixups for cs35l41, mute and gpio leds was a working combination to reach
correct behaviour.
Signed-off-by: christoph.plattner <christoph.plattner@gmx.at>
Link: https://patch.msgid.link/20241005173509.1196001-1-christoph.plattner@gmx.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add an optional drm-client-name field to drm fdinfo's output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-3-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Giving the opportunity to userspace to associate a free-form
name with a drm_file struct is helpful for tracking and debugging.
This is similar to the existing DMA_BUF_SET_NAME ioctl.
Access to client_name is protected by a mutex, and the 'clients' debugfs
file has been updated to print it.
Userspace MR to use this ioctl:
https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1428
If the string passed by userspace contains chars that would mess up output
when it's going to be printed (in dmesg, fdinfo, etc), -EINVAL is returned.
A 0-length string is a valid use, and clears the existing name.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-2-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
clear_all_interrupts() in hw/hfi1/chip.c is currently global
but only used in the same file, so make it static.
There are also 'clear_all_interrupts' functions in i2c-nomadik and
emif.c but fortunately they're already static.
(Build and boot tested only, I don't have this hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241007235327.128613-1-linux@treblig.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To prepare for constifying the following old driver core API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
to new:
struct device *device_find_child(struct device *dev, const void *data,
int (*match)(struct device *dev, const void *data));
The new API does not allow its match function (*match)() to modify
caller's match data @*data, but emac_sgmii_acpi_match(), as the old
API's match function, indeed modifies relevant match data, so it is
not suitable for the new API any more, solved by implementing the same
finding sgmii_ops function by correcting the function and using it
as parameter of device_for_each_child() instead of device_find_child().
By the way, this commit does not change any existing logic.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20241003-qcom_emac_fix-v6-1-0658e3792ca4@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull amlogic auxiliary reset support to continue removing
reset drivers from amlogic clocks
* tag 'reset-amlogic-aux':
reset: amlogic: Fix small whitespace issue
reset: amlogic: add auxiliary reset driver support
reset: amlogic: split the device core and platform probe
reset: amlogic: move drivers to a dedicated directory
reset: amlogic: add reset status support
reset: amlogic: use reset number instead of register count
reset: amlogic: add driver parameters
reset: amlogic: make parameters unsigned
reset: amlogic: use generic data matching function
reset: amlogic: convert driver to regmap
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
nlmsg_put() may return a NULL pointer assigned to nlh, which will later
be dereferenced in nlmsg_end().
Fixes: 9cbed5aab5 ("RDMA/nldev: Add support for RDMA monitoring")
Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007Z
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances.
Fixes: 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1726715161-18941-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver uses internal data structure to construct WQE frame.
It used avid type as u16 which can accommodate up to 64K AVs.
When outstanding AVID crosses 64K, driver truncates AVID and
hence it uses incorrect AVID to WR. This leads to WR failure
due to invalid AV ID and QP is moved to error state with reason
set to 19 (INVALID AVID). When RDMA CM path is used, this issue
hits QP1 and it is moved to error state
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx".
Fixes: 0ac20faf5d ("RDMA/bnxt_re: Reorg the bar mapping")
Link: https://patch.msgid.link/r/1726715161-18941-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
intel_psr2_sel_fetch_update is already quite long function. Now we are
about to add one more HW workaround. Let's split applying workarounds to
selective update area into a separate function.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926064759.1313335-2-jouni.hogander@intel.com
One-element arrays as fake flex arrays are deprecated[1] as the kernel
has switched to C99 flexible-array members instead. This case, however,
has more complexity because it is a flexible array of flexible arrays
and this patch needs to be ready to enable the new compiler flag
-Wflex-array-member-not-at-end (coming in GCC-14) globally.
So, define a new struct type for the single reports:
struct report {
uint16_t size;
struct hostif_msg_hdr msg;
} __packed;
but without the payload (flex array) in it. And add this payload to the
"hostif_msg" structure. This way, in the "report_list" structure we can
declare a flex array of single reports which now do not contain another
flex array.
struct report_list {
[...]
struct report reports[];
} __packed;
Therefore, the "struct hostif_msg" is now made up of a header and a
payload. And the "struct report" uses only the "hostif_msg" header.
The perfect solution would be for the "report" structure to use the
whole "hostif_msg" structure but this is not possible due to nested
flexible arrays. Anyway, the end result is equivalent since this patch
does attempt to change the behaviour of the code.
Now as well, we have more clarity after the cast from the raw bytes to
the new structures. Refactor the code accordingly to use the new
structures.
Also, use "container_of()" whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible array
if needed.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Closes: https://github.com/KSPP/linux/issues/333
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB723760CB93942370E92F00638BF72@AS8PR02MB7237.eurprd02.prod.outlook.com
[kees: tweaked commit log and dropped struct_size() uses]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While touching the initializer, also remove the comma after the sentinel
entry.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Nobody uses that variable after it gets assigned, so this saves us from
having to declare it in the first place.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some Plantronics headset as the below send an unexcept opposite
volume key's HID report for each volume key press after 200ms, like
unecepted Volume Up Key following Volume Down key pressed by user.
This patch adds a quirk to hid-plantronics for these devices, which
will ignore the second unexcepted opposite volume key if it happens
within 220ms from the last one that was handled.
Plantronics EncorePro 500 Series (047f:431e)
Plantronics Blackwire_3325 Series (047f:430c)
The patch was tested on the mentioned model, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected per test
result.
Cc: stable@vger.kernel.org
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Previously when multiple BPF object files referencing the same extern
function (usually kfunc) are statically linked using `bpftool gen
object`, libbpf tries to get the nonexistent size of BTF_KIND_FUNC_PROTO
and fails. This test ensures it is fixed.
Signed-off-by: Eric Long <i@hack3r.moe>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241002-libbpf-dup-extern-funcs-v4-2-560eb460ff90@hack3r.moe
FUNCs do not have sizes, thus currently btf__resolve_size will fail
with -EINVAL. Add conditions so that we only update size when the BTF
object is not function or function prototype.
Signed-off-by: Eric Long <i@hack3r.moe>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241002-libbpf-dup-extern-funcs-v4-1-560eb460ff90@hack3r.moe
During the xdp_adjust_tail test, probabilistic failure occurs and SKB package
is discarded by the kernel. After checking the issues by tracking SKB package,
it is identified that they were caused by checksum errors. Refer to checksum
of the arch/arm64/include/asm/checksum.h for fixing.
v2: Based on Alexei Starovoitov's suggestions, it is necessary to keep the code
implementation consistent.
Fixes: c6ffd1ff78 (bpf: add bpf_xdp_adjust_tail sample prog)
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930024115.52841-1-chenyuan_fl@163.com
