Since I'll be retiring from Intel and will no longer have access to
hardware, Kristen Accardi will be taking over as the iaa_crypto
maintainer.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For iaa_crypto operations, it's assumed that if an operation doesn't
make progress, the IAA watchdog timer will kick in and set the
completion status bit to failure and the reason to completion timeout.
Some systems may have broken hardware that doesn't even do that, which
can result in an infinite status-checking loop. Add a check for that
in the loop, and disable the driver if it occurs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is to fix an issue when simd is not usable that data mismatch
may occur. The fix is to register algs as SIMD modules so that the
algorithm is excecuted when SIMD instructions is usable. Called
gcm_update() to generate the final digest if needed.
A new module rfc4106(gcm(aes)) is also added.
Fixes: cdcecfd999 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Re-write AES/GCM assembly codes with smaller footprints and
small performance gain. Handling the partial blocks differently that
computes partial block to AES states and re-assembles to a complete
block and then computes a full-block hash.
Added gcm_update() to update the last partial block hash value and
generate the final digest.
Fixes: fd0e9b3e2e ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a buggy driver returns a length that is longer than the size
of the buffer provided to it, then this may lead to a buffer overread
in the caller.
Stop this by adding a check for it in the hwrng core.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Broadcom Broadband Access (BCA) SoC:s include the
iproc r200 hwrng so enable it to be selected for these
platforms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'ctrldev' and 'qidev' are the same.
Remove the former to slightly simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected.
Fixes: f414de2e2f ("crypto: caam - use devres to de-initialize QI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver enables clock gating for only one cluster.
However, the new hardware has three clusters. Therefore, clock
gating needs to be enabled based on the number of clusters on the
current hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "err" variable may be returned without an initialized value.
Fixes: 8e3a67f2de ("crypto: lib/mpi - Add error checks to extension")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix passing an initialization vector in the payload field which
is necessary for AES in CBC mode even with hardware-bound keys.
Fixes: 3d16af0b4c ("crypto: mxs-dcp: Add support for hardware-bound keys")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function meson_crypto_probe, devm_platform_ioremap_resource()
have already contains error message, so remove the
redundant assignment and error messages.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the curve size as maximum signature size
for ecrdsa. However it should return twice as much.
It's only the maximum signature size that seems to be off. The maximum
digest size is likewise set to the curve size, but that's correct as it
matches the checks in ecrdsa_set_pub_key() and ecrdsa_verify().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alternatively to the X9.62 encoding of ecdsa signatures, which uses
ASN.1 and is already supported by the kernel, there's another common
encoding called P1363. It stores r and s as the concatenation of two
big endian, unsigned integers. The name originates from IEEE P1363.
Add a P1363 template in support of the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
P1363 is prescribed by SPDM 1.2.1 margin no 44:
"For ECDSA signatures, excluding SM2, in SPDM, the signature shall be
the concatenation of r and s. The size of r shall be the size of
the selected curve. Likewise, the size of s shall be the size of
the selected curve. See BaseAsymAlgo in NEGOTIATE_ALGORITHMS for
the size of r and s. The byte order for r and s shall be in big
endian order. When placing ECDSA signatures into an SPDM signature
field, r shall come first followed by s."
Link: https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.2.1.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the maximum signature and digest size for a
given key to user space. When it only supported RSA keys, calculating
those sizes was trivial as they were always equivalent to the key size.
However when ECDSA was added, the function grew somewhat complicated
calculations which take the ASN.1 encoding and curve into account.
This doesn't scale well and adjusting the calculations is easily
forgotten when adding support for new encodings or curves. In fact,
when NIST P521 support was recently added, the function was initially
not amended:
https://lore.kernel.org/all/b749d5ee-c3b8-4cbd-b252-7773e4536e07@linux.ibm.com/
Introduce a ->max_size() callback to struct sig_alg and take advantage
of it to move the signature size calculations to ecdsa-x962.c.
Introduce a ->digest_size() callback to struct sig_alg and move the
maximum ECDSA digest size to ecdsa.c. It is common across ecdsa-x962.c
and the upcoming ecdsa-p1363.c and thus inherited by both of them.
For all other algorithms, continue using the key size as maximum
signature and digest size.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_sig_maxsize() is a bit of a misnomer as it doesn't return the
maximum signature size, but rather the key size.
Rename it as well as all implementations of the ->max_size callback.
A subsequent commit introduces a crypto_sig_maxsize() function which
returns the actual maximum signature size.
While at it, change the return type of crypto_sig_keysize() from int to
unsigned int for consistency with crypto_akcipher_maxsize(). None of
the callers checks for a negative return value and an error condition
can always be indicated by returning zero.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike the rsa driver, which separates signature decoding and
signature verification into two steps, the ecdsa driver does both in one.
This restricts users to the one signature format currently supported
(X9.62) and prevents addition of others such as P1363, which is needed
by the forthcoming SPDM library (Security Protocol and Data Model) for
PCI device authentication.
Per Herbert's suggestion, change ecdsa to use a "raw" signature encoding
and then implement X9.62 and P1363 as templates which convert their
respective encodings to the raw one. One may then specify
"x962(ecdsa-nist-XXX)" or "p1363(ecdsa-nist-XXX)" to pick the encoding.
The present commit moves X9.62 decoding to a template. A separate
commit is going to introduce another template for P1363 decoding.
The ecdsa driver internally represents a signature as two u64 arrays of
size ECC_MAX_BYTES. This appears to be the most natural choice for the
raw format as it can directly be used for verification without having to
further decode signature data or copy it around.
Repurpose all the existing test vectors for "x962(ecdsa-nist-XXX)" and
create a duplicate of them to test the raw encoding.
Link: https://lore.kernel.org/all/ZoHXyGwRzVvYkcTP@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When extracting a signature component r or s from an ASN.1-encoded
integer, ecdsa_get_signature_rs() subtracts the expected length
"bufsize" from the ASN.1 length "vlen" (both of unsigned type size_t)
and stores the result in "diff" (of signed type ssize_t).
This results in a signed integer overflow if vlen > SSIZE_MAX + bufsize.
The kernel is compiled with -fno-strict-overflow, which implies -fwrapv,
meaning signed integer overflow is not undefined behavior. And the
function does check for overflow:
if (-diff >= bufsize)
return -EINVAL;
So the code is fine in principle but not very obvious. In the future it
might trigger a false-positive with CONFIG_UBSAN_SIGNED_WRAP=y.
Avoid by comparing the two unsigned variables directly and erroring out
if "vlen" is too large.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If <linux/asn1_decoder.h> is the first header included from a .c file
(due to headers being sorted alphabetically), the compiler complains:
include/linux/asn1_decoder.h:18:29: error: unknown type name 'size_t'
Avoid by including <linux/types.h>.
Jonathan notes that the counterpart <linux/asn1_encoder.h> already
includes <linux/types.h>, but additionally includes the unnecessary
<linux/bug.h>. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_sig_*() API calls lived in sig.c so far because they needed
access to struct crypto_sig_type: This was necessary to differentiate
between signature algorithms that had already been migrated from
crypto_akcipher to crypto_sig and those that hadn't yet.
Now that all algorithms have been migrated, the API calls can become
static inlines in <crypto/sig.h> to mimic what <crypto/akcipher.h> is
doing.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced and all asymmetric
sign/verify algorithms have been migrated to it.
The sign/verify operations can thus be dropped from akcipher_alg.
It is now purely for asymmetric encrypt/decrypt.
Move struct crypto_akcipher_sync_data from internal.h to akcipher.c and
unexport crypto_akcipher_sync_{prep,post}(): They're no longer used by
sig.c but only locally in akcipher.c.
In crypto_akcipher_sync_{prep,post}(), drop various NULL pointer checks
for data->dst as they were only necessary for the verify operation.
In the crypto_sig_*() API calls, remove the forks that were necessary
while algorithms were converted from crypto_akcipher to crypto_sig
one by one.
In struct akcipher_testvec, remove the "params", "param_len" and "algo"
elements as they were only needed for the ecrdsa verify operation.
Remove corresponding dead code from test_akcipher_one() as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drivers aspeed-acry.c, hpre_crypto.c and jh7110-rsa.c purport to
implement sign/verify operations for raw (unpadded) "rsa".
But there is no such thing as message digests generally need to be
padded according to a predefined scheme (such as PSS or PKCS#1) to
match the size of the usually much larger RSA keys.
The bogus sign/verify operations defined by these drivers are never
called but block removal of sign/verify from akcipher_alg. Drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The virtio crypto driver exposes akcipher sign/verify operations in a
user space ABI. This blocks removal of sign/verify from akcipher_alg.
Herbert opines:
"I would say that this is something that we can break. Breaking it
is no different to running virtio on a host that does not support
these algorithms. After all, a software implementation must always
be present.
I deliberately left akcipher out of crypto_user because the API
is still in flux. We should not let virtio constrain ourselves."
https://lore.kernel.org/all/ZtqoNAgcnXnrYhZZ@gondor.apana.org.au/
"I would remove virtio akcipher support in its entirety. This API
was never meant to be exposed outside of the kernel."
https://lore.kernel.org/all/Ztqql_gqgZiMW8zz@gondor.apana.org.au/
Drop sign/verify support from virtio crypto. There's no strong reason
to also remove encrypt/decrypt support, so keep it.
A key selling point of virtio crypto is to allow guest access to crypto
accelerators on the host. So far the only akcipher algorithm supported
by virtio crypto is RSA. Dropping sign/verify merely means that the
PKCS#1 padding is now always generated or verified inside the guest,
but the actual signature generation/verification (which is an RSA
decrypt/encrypt operation) may still use an accelerator on the host.
Generating or verifying the PKCS#1 padding is cheap, so a hardware
accelerator won't be of much help there. Which begs the question
whether virtio crypto support for sign/verify makes sense at all.
It would make sense for the sign operation if the host has a security
chip to store asymmetric private keys. But the kernel doesn't even
have an asymmetric_key_subtype yet for hardware-based private keys.
There's at least one rudimentary driver for such chips (atmel-ecc.c for
ATECC508A), but it doesn't implement the sign operation. The kernel
would first have to grow support for a hardware asymmetric_key_subtype
and at least one driver implementing the sign operation before exposure
to guests via virtio makes sense.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When constructing the EMSA-PKCS1-v1_5 padding for the sign operation,
a buffer for the padding is allocated and the Full Hash Prefix is copied
into it. The padding is then passed to the RSA decrypt operation as an
sglist entry which is succeeded by a second sglist entry for the hash.
Actually copying the hash prefix around is completely unnecessary.
It can simply be referenced from a third sglist entry which sits
in-between the padding and the digest.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RSASSA-PKCS1-v1_5 sign operation currently only checks that the
digest length is less than "key_size - hash_prefix->size - 11".
The verify operation merely checks that it's more than zero.
Actually the precise digest length is known because the hash algorithm
is specified upon instance creation and the digest length is encoded
into the final byte of the hash algorithm's Full Hash Prefix.
So check for the exact digest length rather than solely relying on
imprecise maximum/minimum checks.
Keep the maximum length check for the sign operation as a safety net,
but drop the now unnecessary minimum check for the verify operation.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate the sign/verify operations from rsa-pkcs1pad.c to a separate
rsassa-pkcs1.c which uses the new backend.
Consequently there are now two templates which build on the "rsa"
akcipher_alg:
* The existing "pkcs1pad" template, which is instantiated as an
akcipher_instance and retains the encrypt/decrypt operations of
RSAES-PKCS1-v1_5 (RFC 8017 sec 7.2).
* The new "pkcs1" template, which is instantiated as a sig_instance
and contains the sign/verify operations of RSASSA-PKCS1-v1_5
(RFC 8017 sec 8.2).
In a separate step, rsa-pkcs1pad.c could optionally be renamed to
rsaes-pkcs1.c for clarity. Additional "oaep" and "pss" templates
could be added for RSAES-OAEP and RSASSA-PSS.
Note that it's currently allowed to allocate a "pkcs1pad(rsa)" transform
without specifying a hash algorithm. That makes sense if the transform
is only used for encrypt/decrypt and continues to be supported. But for
sign/verify, such transforms previously did not insert the Full Hash
Prefix into the padding. The resulting message encoding was incompliant
with EMSA-PKCS1-v1_5 (RFC 8017 sec 9.2) and therefore nonsensical.
From here on in, it is no longer allowed to allocate a transform without
specifying a hash algorithm if the transform is used for sign/verify
operations. This simplifies the code because the insertion of the Full
Hash Prefix is no longer optional, so various "if (digest_info)" clauses
can be removed.
There has been a previous attempt to forbid transform allocation without
specifying a hash algorithm, namely by commit c0d20d22e0 ("crypto:
rsa-pkcs1pad - Require hash to be present"). It had to be rolled back
with commit b3a8c8a5eb ("crypto: rsa-pkcs1pad: Allow hash to be
optional [ver #2]"), presumably because it broke allocation of a
transform which was solely used for encrypt/decrypt, not sign/verify.
Avoid such breakage by allowing transform allocation for encrypt/decrypt
with and without specifying a hash algorithm (and simply ignoring the
hash algorithm in the former case).
So again, specifying a hash algorithm is now mandatory for sign/verify,
but optional and ignored for encrypt/decrypt.
The new sig_alg API uses kernel buffers instead of sglists, which
avoids the overhead of copying signature and digest from sglists back
into kernel buffers. rsassa-pkcs1.c is thus simplified quite a bit.
sig_alg is always synchronous, whereas the underlying "rsa" akcipher_alg
may be asynchronous. So await the result of the akcipher_alg, similar
to crypto_akcipher_sync_{en,de}crypt().
As part of the migration, rename "rsa_digest_info" to "hash_prefix" to
adhere to the spec language in RFC 9580. Otherwise keep the code
unmodified wherever possible to ease reviewing and bisecting. Leave
several simplification and hardening opportunities to separate commits.
rsassa-pkcs1.c uses modern __free() syntax for allocation of buffers
which need to be freed by kfree_sensitive(), hence a DEFINE_FREE()
clause for kfree_sensitive() is introduced herein as a byproduct.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pkcs1pad_set_pub_key() and pkcs1pad_set_priv_key() are almost identical.
The upcoming migration of sign/verify operations from rsa-pkcs1pad.c
into a separate crypto_template will require another copy of the exact
same functions. When RSASSA-PSS and RSAES-OAEP are introduced, each
will need yet another copy.
Deduplicate the functions into a single one which lives in a common
header file for reuse by RSASSA-PKCS1-v1_5, RSASSA-PSS and RSAES-OAEP.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate ecrdsa.c to the new backend.
One benefit of the new API is the use of kernel buffers instead of
sglists, which avoids the overhead of copying signature and digest
sglists back into kernel buffers. ecrdsa.c is thus simplified quite
a bit.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate ecdsa.c to the new backend.
One benefit of the new API is the use of kernel buffers instead of
sglists, which avoids the overhead of copying signature and digest
sglists back into kernel buffers. ecdsa.c is thus simplified quite
a bit.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 6cb8815f41 ("crypto: sig - Add interface for sign/verify")
began a transition of asymmetric sign/verify operations from
crypto_akcipher to a new crypto_sig frontend.
Internally, the crypto_sig frontend still uses akcipher_alg as backend,
however:
"The link between sig and akcipher is meant to be temporary. The
plan is to create a new low-level API for sig and then migrate
the signature code over to that from akcipher."
https://lore.kernel.org/r/ZrG6w9wsb-iiLZIF@gondor.apana.org.au/
"having a separate alg for sig is definitely where we want to
be since there is very little that the two types actually share."
https://lore.kernel.org/r/ZrHlpz4qnre0zWJO@gondor.apana.org.au/
Take the next step of that migration and augment the crypto_sig frontend
with a sig_alg backend to which all algorithms can be moved.
During the migration, there will briefly be signature algorithms that
are still based on crypto_akcipher, whilst others are already based on
crypto_sig. Allow for that by building a fork into crypto_sig_*() API
calls (i.e. crypto_sig_maxsize() and friends) such that one of the two
backends is selected based on the transform's cra_type.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ECDSA test vectors contain "params", "param_len" and "algo" elements
even though ecdsa.c doesn't make any use of them. The only algorithm
implementation using those elements is ecrdsa.c.
Drop the unused test vector elements.
For the curious, "params" is an ASN.1 SEQUENCE of OID_id_ecPublicKey
and a second OID identifying the curve. For example:
"\x30\x13\x06\x07\x2a\x86\x48\xce\x3d\x02\x01\x06\x08\x2a\x86\x48"
"\xce\x3d\x03\x01\x01"
... decodes to:
SEQUENCE (OID_id_ecPublicKey, OID_id_prime192v1)
The curve OIDs used in those "params" elements are unsurprisingly:
OID_id_prime192v1 (2a8648ce3d030101)
OID_id_prime256v1 (2a8648ce3d030107)
OID_id_ansip384r1 (2b81040022)
OID_id_ansip521r1 (2b81040023)
Those are just different names for secp192r1, secp256r1, secp384r1 and
secp521r1, respectively, per RFC 8422 appendix A:
https://www.rfc-editor.org/rfc/rfc8422#appendix-A
The entries for secp384r1 and secp521r1 curves contain a useful code
comment calling out the curve and hash. Add analogous code comments
to secp192r1 and secp256r1 curve entries.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>:
The "gpio" suffix for GPIO consumers was deprecated a while ago, in
favor of the "gpios" suffix. However, there are still several users of
the "hp-det-gpio" and "mic-det-gpio" properties, in DT bindings,
drivers, and DT source files.
Drivers that use gpiolib handle both the deprecated and new properties
transparently, but that is not the case when using of_property_*() calls
directly.
In STA+AP concurrent mode, performing a scan operation on one vif
temporarily stops beacons on the other. When the scan is completed,
beacons are enabled again with BSS_CHANGED_BEACON_ENABLED.
We can observe that no beacons are being sent when just
rtl8xxxu_start_tx_beacon() is being called.
Thus, also perform update_beacon_work in order to restore beaconing.
Fixes: cde8848cad ("wifi: rtl8xxxu: Add beacon functions")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240930084955.455241-1-martin.kaistra@linutronix.de
In range test, the RSSI is helpful to check attenuation of cable and align
difference between environments. Since data packets can be transmitted with
different rate and power, the RSSI of all packets can be variant.
Oppositely beacon is transmitted with the same rate and power, so beacon
RSSI will be relatively invariant, and more helpful to diagnose problems.
The output of beacon RSSI in unit of dBm looks like:
Beacon: 19 (-33 dBm), TF: 0
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240927013512.7106-1-pkshih@realtek.com
On each channel parsing, a log message is issued. This log message is
not needed and become annoying when many channels are used (up to 64
channel supported).
Simply remove this unneeded log message.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20241003122015.677681-1-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An unsigned value held by offset can never be
negative, so this test will always evaluate
the same way and is therefore redundant.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Link: https://patch.msgid.link/20241004141046.61265-1-advaitdhamorikar@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The aio_src_set_param() function did not previously check the return
values of regmap_write() and regmap_update_bits().
If these functions fail, it could lead to silent failures when
configuring the sample rate converter (SRC), causing improper behavior
in audio processing without any indication of an error.
This patch modifies aio_src_set_param to check the return values of
regmap_write() and regmap_update_bits().
If either function returns an error, the error code is propagated back
to the caller to ensure proper error handling.
This change aligns with the existing error-handling behavior in
functions like uniphier_aio_prepare(), where a failure in a sub-function
should result in an immediate return of the error.
Signed-off-by: Ingyu Jang <ingyujang25@unist.ac.kr>
Link: https://patch.msgid.link/SE1P216MB2287F4D575CFBDC9755E896BFD6A2@SE1P216MB2287.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Mark Brown <broonie@kernel.org>
This kselftest fixes update for Linux 6.12-rc2 consists of fixes
to build warnings, install scripts, run-time error path, and
git status cleanups to tests:
-- devices/probe: fix for Python3 regex string syntax warnings
-- clone3: removing unused macro from clone3_cap_checkpoint_restore()
-- vDSO: fix to align getrandom states to cache line
-- core and exec: add missing executables to .gitignore files
-- rtc: change to skip test if /dev/rtc0 can't be accessed
-- timers/posix: fix warn_unused_result result in __fatal_error()
-- breakpoints: fix to detect suspend successful condition correctly
-- hid: fix to install required dependencies to run the test
-----BEGIN PGP SIGNATURE-----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=AqIe
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
