Add 24 simple KUnit tests for the lib/packing.c pack() and unpack() APIs.
The first 16 tests exercise all combinations of quirks with a simple magic
number value on a 16-byte buffer. The remaining 8 tests cover
non-multiple-of-4 buffer sizes.
These tests were originally written by Vladimir as simple selftest
functions. I adapted them to KUnit, refactoring them into a table driven
approach. This will aid in adding additional tests in the future.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-6-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packing() is now used in some hot paths, and it would be good to get rid
of some ifs and buts that depend on "op", to speed things up a little bit.
With the main implementations now taking size_t endbit, we no longer
have to check for negative values. Update the local integer variables to
also be size_t to match.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-5-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven described packing() as "really bad API" because of
not being able to enforce const correctness. The same function is used
both when "pbuf" is input and "uval" is output, as in the other way
around.
Create 2 wrapper functions where const correctness can be ensured.
Do ugly type casts inside, to be able to reuse packing() as currently
implemented - which will _not_ modify the input argument.
Also, take the opportunity to change the type of startbit and endbit to
size_t - an unsigned type - in these new function prototypes. When int,
an extra check for negative values is necessary. Hopefully, when
packing() goes away completely, that check can be dropped.
My concern is that code which does rely on the conditional directionality
of packing() is harder to refactor without blowing up in size. So it may
take a while to completely eliminate packing(). But let's make alternatives
available for those who do not need that.
Link: https://lore.kernel.org/netdev/20210223112003.2223332-1-geert+renesas@glider.be/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-4-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is not necessary to have the kernel-doc duplicated both in the
header and in the implementation. It is better to have it near the
implementation of the function, since in C, a function can have N
declarations, but only one definition.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-3-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller has a use case for packing() in the intel/ice networking
driver, but it cannot be used as-is.
Simply put, the API quirks for LSW32_IS_FIRST and LITTLE_ENDIAN are
naively implemented with the undocumented assumption that the buffer
length must be a multiple of 4. All calculations of group offsets and
offsets of bytes within groups assume that this is the case. But in the
ice case, this does not hold true. For example, packing into a buffer
of 22 bytes would yield wrong results, but pretending it was a 24 byte
buffer would work.
Rather than requiring such hacks, and leaving a big question mark when
it comes to discontinuities in the accessible bit fields of such buffer,
we should extend the packing API to support this use case.
It turns out that we can keep the design in terms of groups of 4 bytes,
but also make it work if the total length is not a multiple of 4.
Just like before, imagine the buffer as a big number, and its most
significant bytes (the ones that would make up to a multiple of 4) are
missing. Thus, with a big endian (no quirks) interpretation of the
buffer, those most significant bytes would be absent from the beginning
of the buffer, and with a LSW32_IS_FIRST interpretation, they would be
absent from the end of the buffer. The LITTLE_ENDIAN quirk, in the
packing() API world, only affects byte ordering within groups of 4.
Thus, it does not change which bytes are missing. Only the significance
of the remaining bytes within the (smaller) group.
No change intended for buffer sizes which are multiples of 4. Tested
with the sja1105 driver and with downstream unit tests.
Link: https://lore.kernel.org/netdev/a0338310-e66c-497c-bc1f-a597e50aa3ff@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-2-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reworking the implementation, it became apparent that this check
does not exist.
There is no functional issue yet, because at call sites, "startbit" and
"endbit" are always hardcoded to correct values, and never come from the
user.
Even with the upcoming support of arbitrary buffer lengths, the
"startbit >= 8 * pbuflen" check will remain correct. This is because
we intend to always interpret the packed buffer in a way that avoids
discontinuities in the available bit indices.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-1-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit dumps metadata with version 2. It dumps metadata for header
and per CPU data respectively in the arm_spe_print_info() function to
support metadata version 2 format.
After:
0 0 0x3c0 [0x1b0]: PERF_RECORD_AUXTRACE_INFO type: 4
Header version :2
Header size :4
PMU type v2 :13
CPU number :8
Magic :0x1010101010101010
CPU # :0
Num of params :3
MIDR :0x410fd801
PMU Type :-1
Min Interval :0
Magic :0x1010101010101010
CPU # :1
Num of params :3
MIDR :0x410fd801
PMU Type :-1
Min Interval :0
Magic :0x1010101010101010
CPU # :2
Num of params :3
MIDR :0x410fd870
PMU Type :13
Min Interval :1024
Magic :0x1010101010101010
CPU # :3
Num of params :3
MIDR :0x410fd870
PMU Type :13
Min Interval :1024
Magic :0x1010101010101010
CPU # :4
Num of params :3
MIDR :0x410fd870
PMU Type :13
Min Interval :1024
Magic :0x1010101010101010
CPU # :5
Num of params :3
MIDR :0x410fd870
PMU Type :13
Min Interval :1024
Magic :0x1010101010101010
CPU # :6
Num of params :3
MIDR :0x410fd850
PMU Type :-1
Min Interval :0
Magic :0x1010101010101010
CPU # :7
Num of params :3
MIDR :0x410fd850
PMU Type :-1
Min Interval :0
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241003184302.190806-6-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This commit is to support metadata version 2 and at the meantime it is
backward compatible for version 1's format.
The metadata version 1 doesn't include the ARM_SPE_HEADER_VERSION field.
As version 1 is fixed with two u64 fields, by checking the metadata
size, it distinguishes the metadata is version 1 or version 2 (and any
new versions if later will have). For version 2, it reads out CPU number
and retrieves the metadata info for every CPU.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241003184302.190806-5-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Save the Arm SPE information on a per-CPU basis. This approach is easier
in the decoding phase for retrieving metadata based on the CPU number of
every Arm SPE record.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241003184302.190806-4-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The metadata is designed to contain a header and per CPU information.
The arm_spe_find_cpus() function is introduced to identify how many CPUs
support ARM SPE. Based on the CPU number, calculates the metadata size.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241003184302.190806-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The first version's metadata header structure doesn't include a field to
indicate a header version, which is not friendly for extension.
Define the metadata version 2 format with a new header structure and
extend per CPU's metadata. In the meantime, the old metadata header will
still be supported for backward compatibility.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241003184302.190806-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove() return
void") .remove() is (again) the right callback to implement for platform
drivers.
Convert all PCI controller drivers to use .remove(), with the eventual goal
to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just changing
the structure member name in the driver initializer.
Link: https://lore.kernel.org/r/20240927092449.44628-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove() return
void") .remove() is (again) the right callback to implement for platform
drivers.
Convert all PCI controller drivers to use .remove(), with the eventual goal
to drop struct platform_driver::remove_new(). As .remove() and .remove_new()
have the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Link: https://lore.kernel.org/r/20240923065706.728769-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
[bhelgaas: add pcie-xilinx-nwl.c and tidy whitespace per Uwe Kleine-König:
https://lore.kernel.org/r/tdxrmmqyzcufupnwkdbg7lwgadizm7v3lxjirykijbml7x54ze@upbdzycdsilm]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Push regular plane/color management updates to the DSB,
if other constraints allow it.
The first part of the sequence will go as follows:
- CPU will kick off DSB0 immediately
- DSB0 writes double bufferd non-arming registers
- DSB0 evades the vblank
- DSB0 writes double buffered arming registers
If no color management updates is needed we follow that up with:
- DSB0 waits for the undelayed vblank
- DSB0 waits for the delayed vblank (usec wait)
- DSB0 emits an interrupt which will cause the CPU to complete the commit
If color management update is needed:
- DSB0 will start DSB1 with wait for undelayed vblank
- DSB0 will in parallel perform the force DEwake tricks
- DSB1 writes single buffered LUT registers
- DSB1 waits for the delayed vblank (usec wait)
- DSB1 emits an interrupt which will cause the CPU to complete the commit
With this sequence we don't need to increase the vblank delay
to make room for register programming during vblank, which is
a good thing for high refresh rate display. But I'll need to
still think of some way to eliminate VRR commit completion
related races under this scheme.
Stuff that isn't ready for DSB yet:
- modesets (potentially we could do
at least the plane enabling via DSB)
- fastsets
- VRR
- PSR
- scalers
- async flips
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-14-ville.syrjala@linux.intel.com
We need to be able to do both MMIO and DSB based pipe/plane
programming. To that end plumb the 'dsb' all way from the top
into the plane commit hooks.
The compiler appears smart enough to combine the branches from
all the back-to-back register writes into a single branch.
So the generated asm ends up looking more or less like this:
plane_hook()
{
if (dsb) {
intel_dsb_reg_write();
intel_dsb_reg_write();
...
} else {
intel_de_write_fw();
intel_de_write_fw();
...
}
}
which seems like a reasonably efficient way to do this.
An alternative I was also considering is some kind of closure
(register write function + display vs. dsb pointer passed to it).
That does result is smaller code as there are no branches anymore,
but having each register access go via function pointer sounds
less efficient.
Not that I actually measured the overhead of either approach yet.
Also the reg_rw tracepoint seems to be making a huge mess of the
generated code for the mmio path. And additionally there's some
kind of IS_GSI_REG() hack in __raw_uncore_read() which ends up
generating a pointless branch for every mmio register access.
So looks like there might be quite a bit of room for improvement
in the mmio path still.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-12-ville.syrjala@linux.intel.com
Add intel_dsb_wait_vblank_delay() which instructs the DSB
to wait for duration between the undelayed and delayed vblanks.
We'll need this as the DSB can only directly wait for the
undelayed vblank, but we'll need to wait until the delayed
vblank has elapsed as well.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-10-ville.syrjala@linux.intel.com
Introduce intel_scanlines_to_usecs() as a counterpart to
intel_usecs_to_scanlines().
We'll have some use for this in DSB code as we want to do
relative scanline waits to evade the delayed vblank, but
unfortunately DSB can't do relative scanline waits (only
absolute). So we'll instead convert the relative scanline
count to usec and do a relative usec wait instead (which the
DSB knows how to do).
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-9-ville.syrjala@linux.intel.com
Add a function to emit a DSB wait for vblank instruction. This
just waits until the specified number of vblanks.
Note that this triggers on the transcoder's undelayed vblank,
as opposed to the pipe's delayed vblank.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-8-ville.syrjala@linux.intel.com
Add a function to emit the DSB "wait usecs" instruction.
This is just a usleep() for the DSB.
As a lower bound it seems pretty accurate, but the upper bound
seemed oddly relaxed (ie. sometimes I've seen waits that are
quite a bit longer than specified, not sure why).
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-7-ville.syrjala@linux.intel.com
Add a helper for performing vblank evasion on the DSB. DSB based
plane updates will need this to guarantee all the double buffered
arming registers will get programmed atomically within the same
frame.
With VRR we more or less have two vblanks to worry about:
- vmax vblank start in case no push was sent
- vmin vblank start in case a push was already sent during
the vertical active. Only a concern for mailbox updates,
which I suppose could happen if the legacy cursor updates
take the non-fastpath without setting
state->legacy_cursor_update to false.
Since we don't know which case is relevant we'll just evade
both.
We must also make sure to evade both the delayed vblank
(for pipe/plane registers) and the undelayed vblank
(for transcoder registers and chained DSBs w/
DSB_WAIT_FOR_VBLANK).
TODO: come up with a sensible usec number for the evasion...
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-6-ville.syrjala@linux.intel.com
The DSB can signal a programmable interrupt in response to
a specific DSB command getting executed. Hook that up.
For now we'll just use this to signal the completion of the
commit via a vblank event. If, in the future, we'll need to
do other things in response to DSB interrupts we may need to
come up with some kind of fancier DSB interrupt framework where
the caller can specify a custom handler...
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-5-ville.syrjala@linux.intel.com
Once we start using DSB for plane updates we'll need to defer
generating the DSB buffer until the clear color has been
read out. So we need to move at some of the DSB stuff into
commit_tail(). That is perhaps a better place for it anyway
as the ioctl thread can move on immediately without spending
time building the DSB commands.
We always have the MMIO fallback (in case the DSB buffer
allocation fails), so there's no real reason to keep any
of this in the synchronous part of the ioctl.
Because the DSB LUT programming doesn't depend on the plane
clear color we can still do that part before waiting for
fences/etc. which should help paralleize things a bit more.
The DSB plane programming will need to happen after those
however as that depends on the clear color.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-4-ville.syrjala@linux.intel.com
Read out the clear color as soon as fences and the transient
data flush have finished. There is no need to wait for
all the display specific operations that might still be
going on. This could parallelize things a bit more effectively.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-3-ville.syrjala@linux.intel.com
Reading from the DSB command buffer might be somewhat expensive on
discrete GPUs because the buffer resides in GPU local memory. Avoid
such reads in the indexed register write handling by tracking the
previous instruction in intel_dsb.
TODO: actually measure this
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-2-ville.syrjala@linux.intel.com
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-4-liwei391@huawei.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
stop_kthread() is the offline callback for "trace/osnoise:online", since
commit 5bfbcd1ee5 ("tracing/timerlat: Add interface_lock around clearing
of kthread in stop_kthread()"), the following ABBA deadlock scenario is
introduced:
T1 | T2 [BP] | T3 [AP]
osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun()
| _cpu_down() | osnoise_cpu_die()
mutex_lock(&interface_lock) | | stop_kthread()
| cpus_write_lock() | mutex_lock(&interface_lock)
cpus_read_lock() | cpuhp_kick_ap() |
As the interface_lock here in just for protecting the "kthread" field of
the osn_var, use xchg() instead to fix this issue. Also use
for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take
cpu_read_lock() again.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-3-liwei391@huawei.com
Fixes: 5bfbcd1ee5 ("tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
osnoise_hotplug_workfn() is the asynchronous online callback for
"trace/osnoise:online". It may be congested when a CPU goes online and
offline repeatedly and is invoked for multiple times after a certain
online.
This will lead to kthread leak and timer corruption. Add a check
in start_kthread() to prevent this situation.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-2-liwei391@huawei.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
<asm/ftrace.h> uses struct pt_regs in several places. Include
<asm/ptrace.h> to ensure it's visible. This is needed to make sure
object files that only include <asm/asm-prototypes.h> compile.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/20240916221557.846853-2-samitolvanen@google.com
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The help text in osnoise top and timerlat top had some minor errors
and omissions. The -d option was missing the 's' (second) abbreviation and
the error message for '-d' used '-D'.
Cc: stable@vger.kernel.org
Fixes: 1eceb2fc2c ("rtla/osnoise: Add osnoise top mode")
Fixes: a828cd18bc ("rtla: Add timerlat tool and timelart top mode")
Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rtla now supports out-of-tree builds, but installation fails as it
still tries to install the rtla binary from the source tree. Use the
existing macro $(RTLA) to refer to the binary.
Link: https://lore.kernel.org/ZudubuoU_JHjPZ7w@decadent.org.uk
Fixes: 01474dc706 ("tools/rtla: Use tools/build makefiles to build rtla")
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the tp_printk kernel command line is used, the trace events go
directly to printk(). It is still checked via the trace_check_vprintf()
function to make sure the pointers of the trace event are legit.
The addition of reading buffers from previous boots required adding a
delta between the addresses of the previous boot and the current boot so
that the pointers in the old buffer can still be used. But this required
adding a trace_array pointer to acquire the delta offsets.
The tp_printk code does not provide a trace_array (tr) pointer, so when
the offsets were examined, a NULL pointer dereference happened and the
kernel crashed.
If the trace_array does not exist, just default the delta offsets to zero,
as that also means the trace event is not being read from a previous boot.
Link: https://lore.kernel.org/all/Zv3z5UsG_jsO9_Tb@aschofie-mobl2.lan/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241003104925.4e1b1fd9@gandalf.local.home
Fixes: 07714b4bb3 ("tracing: Handle old buffer mappings for event strings and functions")
Reported-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 11feaef69d ("drm/bridge: it6505: Add caching for EDID")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
Initialize with 4 rings to enable preemption.
Add the "preemption_enabled" module parameter to override this.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618029/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some userspace changes are necessary so add a flag for userspace to
advertise support for preemption when creating the submitqueue.
When this flag is not set preemption will not be allowed in the middle
of the submitted IBs therefore mantaining compatibility with older
userspace.
The flag is rejected if preemption is not supported on the target, this
allows userspace to know whether preemption is supported.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618028/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add trace points corresponding to preemption being triggered and being
completed for latency measurement purposes.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618026/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the postamble to reset perf counters when switching between rings,
except when sysprof is enabled, analogously to how they are reset
between submissions when switching pagetables.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618024/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In mesa CP_SET_CTXSWITCH_IB is renamed to CP_SET_AMBLE and some other
names are changed to match KGSL. Import those changes.
The changes have not been merged yet in mesa but are necessary for this
series.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618023/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch implements preemption feature for A6xx targets, this allows
the GPU to switch to a higher priority ringbuffer if one is ready. A6XX
hardware as such supports multiple levels of preemption granularities,
ranging from coarse grained(ringbuffer level) to a more fine grained
such as draw-call level or a bin boundary level preemption. This patch
enables the basic preemption level, with more fine grained preemption
support to follow.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618021/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a field to contain the pwup_reglist needed for preemption.
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618018/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'default n' that was in NFS_COMMON_LOCALIO_SUPPORT caused these
extra defaults to be missed:
default y if NFSD=y || NFS_FS=y
default m if NFSD=m && NFS_FS=m
Remove the 'default n' for NFS_COMMON_LOCALIO_SUPPORT so that the
correct tristate is selected based on how NFSD and NFS_FS are
configured. This fixes the reported case where NFS_FS=y but
NFS_COMMON_LOCALIO_SUPPORT=m, it is now correctly set to =y.
In addition, add extra 'depends on NFS_LOCALIO' to
NFS_COMMON_LOCALIO_SUPPORT so that if NFS_LOCALIO isn't set then
NFS_COMMON_LOCALIO_SUPPORT will not be either.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410031944.hMCFY9BO-lkp@intel.com/
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Add nfs_to_nfsd_file_put_local() interface to fix race with nfsd
module unload. Similarly, use RCU around nfs_open_local_fh()'s error
path call to nfs_to->nfsd_serv_put(). Holding RCU ensures that NFS
will safely _call and return_ from its nfs_to calls into the NFSD
functions nfsd_file_put_local() and nfsd_serv_put().
Otherwise, if RCU isn't used then there is a narrow window when NFS's
reference for the nfsd_file and nfsd_serv are dropped and the NFSD
module could be unloaded, which could result in a crash from the
return instruction for either nfs_to->nfsd_file_put_local() or
nfs_to->nfsd_serv_put().
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The math in "rc_list->rcl_nrefcalls * 2 * sizeof(uint32_t)" could have an
integer overflow. Add bounds checking on rc_list->rcl_nrefcalls to fix
that.
Fixes: 4aece6a19c ("nfs41: cb_sequence xdr implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Add missing bitfields to CONTEXT_SWITCH_CNTL in a6xx.xml.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618016/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Adds a field to `adreno_info` to store the GPU specific preempt record
size.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618015/
Signed-off-by: Rob Clark <robdclark@chromium.org>
