Failing OP_SETCLIENTID or OP_EXCHANGE_ID should only happen if there is
memory allocation failure. Putting a hard limit on the number of
clients is not really helpful as it will either happen too early and
prevent clients that the server can easily handle, or too late and
allow clients when the server is swamped.
The calculated limit is still useful for expiring courtesy clients where
there are "too many" clients, but it shouldn't prevent the creation of
active clients.
Testing of lots of clients against small-mem servers reports repeated
NFS4ERR_DELAY responses which doesn't seem helpful. There may have been
reports of similar problems in production use.
Also remove an outdated comment - we do use a slab cache.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's issue as follows:
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: unable to handle page fault for address: fffffbfff80c609a
PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0
Call Trace:
<TASK>
__die+0x1f/0x70
page_fault_oops+0x2cd/0x860
spurious_kernel_fault+0x36/0x450
do_kern_addr_fault+0xca/0x100
exc_page_fault+0x128/0x150
asm_exc_page_fault+0x26/0x30
percpu_counter_destroy_many+0xf7/0x2a0
mmdrop+0x209/0x350
finish_task_switch.isra.0+0x481/0x840
schedule_tail+0xe/0xd0
ret_from_fork+0x23/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
If register_sysctl() return NULL, then svc_rdma_proc_cleanup() will not
destroy the percpu counters which init in svc_rdma_proc_init().
If CONFIG_HOTPLUG_CPU is enabled, residual nodes may be in the
'percpu_counters' list. The above issue may occur once the module is
removed. If the CONFIG_HOTPLUG_CPU configuration is not enabled, memory
leakage occurs.
To solve above issue just destroy all percpu counters when
register_sysctl() return NULL.
Fixes: 1e7e557316 ("svcrdma: Restore read and write stats")
Fixes: 22df5a2246 ("svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter")
Fixes: df971cd853 ("svcrdma: Convert rdma_stat_recv to a per-CPU counter")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Translating an on-the-wire value to a local host errno is
architecturally a job for the proc function, not the XDR decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In particular, client-side source code needs the definition of
"struct rpc_procinfo" and does not want header files that pull
in "struct svc_rqst". Otherwise, the source does not compile.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Obviously, "nfs_ok" is defined only for NFS protocols. Other XDR
protocols won't know "nfs_ok" from Adam.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This tracepoint was a "note to self" and is not operational. It is
added only to client-side code, which so far we haven't needed. It
will cause immediate breakage once we start generating client code,
though, so remove it now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The last reference for `cache_head` can be reduced to zero in `c_show`
and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently,
`svc_export_put` and `expkey_put` will be invoked, leading to two
issues:
1. The `svc_export_put` will directly free ex_uuid. However,
`e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can
trigger a use-after-free issue, shown below.
==================================================================
BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd]
Read of size 1 at addr ff11000010fdc120 by task cat/870
CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_address_description.constprop.0+0x2c/0x3a0
print_report+0xb9/0x280
kasan_report+0xae/0xe0
svc_export_show+0x362/0x430 [nfsd]
c_show+0x161/0x390 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 830:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_node_track_caller_noprof+0x1bc/0x400
kmemdup_noprof+0x22/0x50
svc_export_parse+0x8a9/0xb80 [nfsd]
cache_do_downcall+0x71/0xa0 [sunrpc]
cache_write_procfs+0x8e/0xd0 [sunrpc]
proc_reg_write+0xe1/0x140
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 868:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kfree+0xf3/0x3e0
svc_export_put+0x87/0xb0 [nfsd]
cache_purge+0x17f/0x1f0 [sunrpc]
nfsd_destroy_serv+0x226/0x2d0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`.
However, `svc_export_put`/`expkey_put` will call path_put, which
subsequently triggers a sleeping operation due to the following
`dput`.
=============================
WARNING: suspicious RCU usage
5.10.0-dirty #141 Not tainted
-----------------------------
...
Call Trace:
dump_stack+0x9a/0xd0
___might_sleep+0x231/0x240
dput+0x39/0x600
path_put+0x1b/0x30
svc_export_put+0x17/0x80
e_show+0x1c9/0x200
seq_read_iter+0x63f/0x7c0
seq_read+0x226/0x2d0
vfs_read+0x113/0x2c0
ksys_read+0xc9/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Fix these issues by using `rcu_work` to help release
`svc_expkey`/`svc_export`. This approach allows for an asynchronous
context to invoke `path_put` and also facilitates the freeing of
`uuid/exp/key` after an RCU grace period.
Fixes: 9ceddd9da1 ("knfsd: Allow lockless lookups of the exports")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The function `c_show` was called with protection from RCU. This only
ensures that `cp` will not be freed. Therefore, the reference count for
`cp` can drop to zero, which will trigger a refcount use-after-free
warning when `cache_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `cp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 822 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
Call Trace:
<TASK>
c_show+0x2fc/0x380 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: bf18f163e8 ("NFSD: Using exp_get for export getting")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since commit 75c7940d2a ("lockd: set missing fl_flags field when
retrieving args"), nlmsvc_retrieve_args() initializes the flc_flags
field. svcxdr_decode_lock() no longer needs to do this.
This clean up removes one dependency on the nlm_lock:fl field. No
behavior change is expected.
Analysis:
svcxdr_decode_lock() is called by:
nlm4svc_decode_testargs()
nlm4svc_decode_lockargs()
nlm4svc_decode_cancargs()
nlm4svc_decode_unlockargs()
nlm4svc_decode_testargs() is used by:
- NLMPROC4_TEST and NLMPROC4_TEST_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_GRANTED and NLMPROC4_GRANTED_MSG, which don't pass the
lock's file_lock to the generic lock API
nlm4svc_decode_lockargs() is used by:
- NLMPROC4_LOCK and NLM4PROC4_LOCK_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_UNLOCK and NLM4PROC4_UNLOCK_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_NM_LOCK, which calls nlmsvc_retrieve_args()
nlm4svc_decode_cancargs() is used by:
- NLMPROC4_CANCEL and NLMPROC4_CANCEL_MSG, which call nlmsvc_retrieve_args()
nlm4svc_decode_unlockargs() is used by:
- NLMPROC4_UNLOCK and NLMPROC4_UNLOCK_MSG, which call nlmsvc_retrieve_args()
All callers except GRANTED/GRANTED_MSG eventually call
nlmsvc_retrieve_args() before using nlm_lock::fl.c.flc_flags. Thus
this change is safe.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The nlm_cookie parameter has been unused since commit 09802fd2a8
("lockd: rip out deferred lock handling from testlock codepath").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since commit 103cc1fafe ("SUNRPC: Parametrize how much of argsize
should be zeroed") (and possibly long before that, even) all of the
memory underlying rqstp->rq_argp is zeroed already. There's no need
for the memset() in nlm4svc_decode_shareargs().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Looks like the last usage of this typedef was removed by
commit 026fec7e7c ("sunrpc: properly type pc_decode callbacks") in
2017.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It's only current caller already length-checks the string, but let's
be safe.
Fixes: 0964a3d3f1 ("[PATCH] knfsd: nfsd4 reboot dirname fix")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. The computed value of @p is saved each time through the
loop but is never used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. The result of "*p++" is saved, but is not used before it
is overwritten. The result of xdr_encode_opaque() is saved each
time through the loop but is never used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
@ses is initialized to NULL. If __nfsd4_find_backchannel() finds no
available backchannel session, setup_callback_client() will try to
dereference @ses and segfault.
Fixes: dcbeaa68db ("nfsd4: allow backchannel recovery")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fh_size is an unsigned int, thus it can never be less than 0.
Fixes: d8b26071e6 ("NFSD: simplify struct nfsfh")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. AFAICT, there is no way to reach the out_free_conn label
with @old set to a non-NULL value, so the expire_client(old) call
is never reached and can be removed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSD_MAY_LOCK means a few different things.
- it means that GSS is not required.
- it means that with NFSEXP_NOAUTHNLM, authentication is not required
- it means that OWNER_OVERRIDE is allowed.
None of these are specific to locking, they are specific to the NLM
protocol.
So:
- rename to NFSD_MAY_NLM
- set NFSD_MAY_OWNER_OVERRIDE and NFSD_MAY_BYPASS_GSS in nlm_fopen()
so that NFSD_MAY_NLM doesn't need to imply these.
- move the test on NFSEXP_NOAUTHNLM out of nfsd_permission() and
into fh_verify where other special-case tests on the MAY flags
happen. nfsd_permission() can be called from other places than
fh_verify(), but none of these will have NFSD_MAY_NLM.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv4 LOCK operations should not avoid the set of authorization
checks that apply to all other NFSv4 operations. Also, the
"no_auth_nlm" export option should apply only to NLM LOCK requests.
It's not necessary or sensible to apply it to NFSv4 LOCK operations.
Instead, set no permission bits when calling fh_verify(). Subsequent
stateid processing handles authorization checks.
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since SLOB was removed and since
commit 6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For convenience, copy the XDR extraction script from RFC
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT do not bypass
only GSS, but bypass any method. This is a problem specially for NFS3
AUTH_NULL-only exports.
The purpose of NFSD_MAY_BYPASS_GSS_ON_ROOT is described in RFC 2623,
section 2.3.2, to allow mounting NFS2/3 GSS-only export without
authentication. So few procedures which do not expose security risk used
during mount time can be called also with AUTH_NONE or AUTH_SYS, to allow
client mount operation to finish successfully.
The problem with current implementation is that for AUTH_NULL-only exports,
the NFSD_MAY_BYPASS_GSS_ON_ROOT is active also for NFS3 AUTH_UNIX mount
attempts which confuse NFS3 clients, and make them think that AUTH_UNIX is
enabled and is working. Linux NFS3 client never switches from AUTH_UNIX to
AUTH_NONE on active mount, which makes the mount inaccessible.
Fix the NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT implementation
and really allow to bypass only exports which have enabled some real
authentication (GSS, TLS, or any other).
The result would be: For AUTH_NULL-only export if client attempts to do
mount with AUTH_UNIX flavor then it will receive access errors, which
instruct client that AUTH_UNIX flavor is not usable and will either try
other auth flavor (AUTH_NULL if enabled) or fails mount procedure.
Similarly if client attempt to do mount with AUTH_NULL flavor and only
AUTH_UNIX flavor is enabled then the client will receive access error.
This should fix problems with AUTH_NULL-only or AUTH_UNIX-only exports if
client attempts to mount it with other auth flavor (e.g. with AUTH_NULL for
AUTH_UNIX-only export, or with AUTH_UNIX for AUTH_NULL-only export).
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv4.1 OP_EXCHANGE_ID response from server may contain server
implementation details (domain, name and build time) in optional
nfs_impl_id4 field. Currently nfsd does not fill this field.
Send these information in NFSv4.1 OP_EXCHANGE_ID response. Fill them with
the same values as what is Linux NFSv4.1 client doing. Domain is hardcoded
to "kernel.org", name is composed in the same way as "uname -srvm" output
and build time is hardcoded to zeros.
NFSv4.1 client and server implementation fields are useful for statistic
purposes or for identifying type of clients and servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NLMv2 is completely different protocol than NLMv1 and NLMv3, and in
original Sun implementation is used for RPC loopback callbacks from statd
to lockd services. Linux does not use nor does not implement NLMv2.
Hence, NLMv3 is not backward compatible with NLMv2. But NLMv3 is backward
compatible with NLMv1. Fix comment.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Turn nfsd_compound_encode_err tracepoint into a class and add a new
nfsd_compound_op_err tracepoint.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-----BEGIN PGP SIGNATURE-----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=bDvp
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Cleanups of the eventfd handling code, making it fully private.
- Support for sending a sync message to another ring, without having a
ring available to send a normal async message.
- Get rid of the separate unlocked hash table, unify everything around
the single locked one.
- Add support for ring resizing. It can be hard to appropriately size
the CQ ring upfront, if the application doesn't know how busy it will
be. This results in applications sizing rings for the most busy case,
which can be wasteful. With ring resizing, they can start small and
grow the ring, if needed.
- Add support for fixed wait regions, rather than needing to copy the
same wait data tons of times for each wait operation.
- Rewrite the resource node handling, which before was serialized per
ring. This caused issues with particularly fixed files, where one
file waiting on IO could hold up putting and freeing of other
unrelated files. Now each node is handled separately. New code is
much simpler too, and was a net 250 line reduction in code.
- Add support for just doing partial buffer clones, rather than always
cloning the entire buffer table.
- Series adding static NAPI support, where a specific NAPI instance is
used rather than having a list of them available that need lookup.
- Add support for mapped regions, and also convert the fixed wait
support mentioned above to that concept. This avoids doing special
mappings for various planned features, and folds the existing
registered wait into that too.
- Add support for hybrid IO polling, which is a variant of strict
IOPOLL but with an initial sleep delay to avoid spinning too early
and wasting resources on devices that aren't necessarily in the < 5
usec category wrt latencies.
- Various cleanups and little fixes.
* tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux: (79 commits)
io_uring/region: fix error codes after failed vmap
io_uring: restore back registered wait arguments
io_uring: add memory region registration
io_uring: introduce concept of memory regions
io_uring: temporarily disable registered waits
io_uring: disable ENTER_EXT_ARG_REG for IOPOLL
io_uring: fortify io_pin_pages with a warning
switch io_msg_ring() to CLASS(fd)
io_uring: fix invalid hybrid polling ctx leaks
io_uring/uring_cmd: fix buffer index retrieval
io_uring/rsrc: add & apply io_req_assign_buf_node()
io_uring/rsrc: remove '->ctx_ptr' of 'struct io_rsrc_node'
io_uring/rsrc: pass 'struct io_ring_ctx' reference to rsrc helpers
io_uring: avoid normal tw intermediate fallback
io_uring/napi: add static napi tracking strategy
io_uring/napi: clean up __io_napi_do_busy_loop
io_uring/napi: Use lock guards
io_uring/napi: improve __io_napi_add
io_uring/napi: fix io_napi_entry RCU accesses
io_uring/napi: protect concurrent io_napi_entry timeout accesses
...
-----BEGIN PGP SIGNATURE-----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=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
- Fix typos in comments (Yan Zhen)
- Remove unused macro definitions (Damien Le Moal)
- Switch back to the .remove() callback (Uwe Kleine-König)
- Make use of the get_unaligned_be24() helper instead of open coding
(Andy Shevchenko)
- Refactor and cleanup ata_scsi_simulate() command emulation, such that
all commands use ata_scsi_rbuf_fill() with its own callback
(Damien Le Moal)
- Improve ata_scsi_simulate() command emulation by accurately setting the
SCSI command residual (number of bytes not filled) in the command reply
(Damien Le Moal)
- Add missing iommus property in ahci-platform device tree binding
(Frank Wunderlich)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZzthbQAKCRDJZDGjmcZN
cvgtAQDDzKLg9UQhJou7nAjrdyJi7gZBy5o0Q0KIjMOqgnmz8wEA6HC+EWOjH3Fq
3f1nwxXGKR7T+bVUZpYfB+YTB8ly+g0=
=0XKN
-----END PGP SIGNATURE-----
Merge tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Fix typos in comments (Yan Zhen)
- Remove unused macro definitions (Damien Le Moal)
- Switch back to the .remove() callback (Uwe Kleine-König)
- Make use of the get_unaligned_be24() helper instead of open coding
(Andy Shevchenko)
- Refactor and cleanup ata_scsi_simulate() command emulation, such that
all commands use ata_scsi_rbuf_fill() with its own callback (Damien
Le Moal)
- Improve ata_scsi_simulate() command emulation by accurately setting
the SCSI command residual (number of bytes not filled) in the command
reply (Damien Le Moal)
- Add missing iommus property in ahci-platform device tree binding
(Frank Wunderlich)
* tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-platform: add missing iommus property
ata: libata-scsi: Return residual for emulated SCSI commands
ata: libata-scsi: Remove struct ata_scsi_args
ata: libata-scsi: Document all VPD page inquiry actors
ata: libata-scsi: Refactor ata_scsiop_maint_in()
ata: libata-scsi: Refactor ata_scsiop_read_cap()
ata: libata-scsi: Refactor ata_scsi_simulate()
ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24()
ata: Switch back to struct platform_driver::remove()
ata: libata: Remove unused macro definitions
ata: Fix typos in the comment
-----BEGIN PGP SIGNATURE-----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=aAcf
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
notably in the journaling code, bufered I/O, and compiler warning
cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmc7NN4ACgkQ8vlZVpUN
gaMJRAf+Oc3Tn/ZvuX0amkaBQI+ZNIeYD/U0WBSvarKb00bo1X39mM/0LovqV6ec
c51iRgt8U6uDZDUm6zJtppkIUiqkHRj+TmTInueFtmUqhIg8jgfZIpxCn0QkFKnQ
jI5EKCkvUqM0B347axH/s+dlOE9JBSlQNKgjkvCYOGknQ1PH6X8oMDt5QAqGEk3P
Nsa4QChIxt2yujFvydgFT+RAbjvY3sNvrZ7D3B+KL3VSJpILChVZK/UdFrraSXxq
mLO5j4txjtnr/OLgujCTHOfPsTiQReHHXErrSbKhnFhrTXLD0mZSUgJ6irpaxRQ5
wQHQzmsrVwqFfqPU3Hkl8FGeCR0owQ==
=26/E
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of miscellaneous ext4 bug fixes and cleanups this cycle, most
notably in the journaling code, bufered I/O, and compiler warning
cleanups"
* tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
jbd2: Fix comment describing journal_init_common()
ext4: prevent an infinite loop in the lazyinit thread
ext4: use struct_size() to improve ext4_htree_store_dirent()
ext4: annotate struct fname with __counted_by()
jbd2: avoid dozens of -Wflex-array-member-not-at-end warnings
ext4: use str_yes_no() helper function
ext4: prevent delalloc to nodelalloc on remount
jbd2: make b_frozen_data allocation always succeed
ext4: cleanup variable name in ext4_fc_del()
ext4: use string choices helpers
jbd2: remove the 'success' parameter from the jbd2_do_replay() function
jbd2: remove useless 'block_error' variable
jbd2: factor out jbd2_do_replay()
jbd2: refactor JBD2_COMMIT_BLOCK process in do_one_pass()
jbd2: unified release of buffer_head in do_one_pass()
jbd2: remove redundant judgments for check v1 checksum
ext4: use ERR_CAST to return an error-valued pointer
mm: zero range of eof folio exposed by inode size extension
ext4: partial zero eof block on unaligned inode size extension
ext4: disambiguate the return value of ext4_dio_write_end_io()
...
"micrel,led-mode" is not yet documented by a schema. It's irrelevant to
the example, so just drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of risking alignment problems and causing (false positive) array
bound warnings when casting a u32 to (64-bit) unsigned long, just use a
native unsigned long for doing bit searches. Avoids warning with GCC 15's
-Warray-bounds -fdiagnostics-details:
In file included from ../include/linux/bitmap.h:11,
from ../include/linux/cpumask.h:12,
from ../arch/x86/include/asm/paravirt.h:21,
from ../arch/x86/include/asm/irqflags.h:80,
from ../include/linux/irqflags.h:18,
from ../include/linux/spinlock.h:59,
from ../include/linux/irq.h:14,
from ../include/linux/irqchip/chained_irq.h:10,
from ../include/linux/gpio/driver.h:8,
from ../drivers/pinctrl/mediatek/pinctrl-airoha.c:11:
In function 'find_next_bit',
inlined from 'airoha_irq_handler' at ../drivers/pinctrl/mediatek/pinctrl-airoha.c:2394:3:
../include/linux/find.h:65:23: error: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u32[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds=]
65 | val = *addr & GENMASK(size - 1, offset);
| ^~~~~
../drivers/pinctrl/mediatek/pinctrl-airoha.c: In function 'airoha_irq_handler':
../drivers/pinctrl/mediatek/pinctrl-airoha.c:2387:21: note: object 'status' of size 4
2387 | u32 status;
| ^~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20241117114534.work.292-kees@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
and friends
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdpZQAKCRBZ7Krx/gZQ
6whMAQDhlGFV+nGRetwe4t60mVRpxIoc71GLC7b6V8FmyfTI5AEAkAigkJ8KCZDP
mfGsN/3PtzoxnIkIqdk7Y7q4/fowyAw=
=4DWZ
-----END PGP SIGNATURE-----
Merge tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull statx updates from Al Viro:
"Sanitize struct filename and lookup flags handling in statx and
friends"
* tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: kill empty_dir_getattr()
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
fs/stat.c: switch to CLASS(fd_raw)
kill getname_statx_lookup_flags()
io_statx_prep(): use getname_uflags()
When the temporary macro K210_PC_DEFAULT is not needed anymore,
use its name in the #undef statement instead of
the incorrect "DEFAULT" name.
Fixes: d4c34d09ab ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/20241113071201.5440-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When building the rust_print sample with CONFIG_JUMP_LABEL=n, the Rust
static key support falls back to using static_key_count. This function
accepts a mutable pointer to the `struct static_key`, but the Rust
abstractions are incorrectly passing a const pointer.
This means that builds using CONFIG_JUMP_LABEL=n and SAMPLE_RUST_PRINT=y
fail with the following error message:
error[E0308]: mismatched types
--> <root>/samples/rust/rust_print_main.rs:87:5
|
87 | / kernel::declare_trace! {
88 | | /// # Safety
89 | | ///
90 | | /// Always safe to call.
91 | | unsafe fn rust_sample_loaded(magic: c_int);
92 | | }
| | ^
| | |
| |_____types differ in mutability
| arguments to this function are incorrect
|
= note: expected raw pointer `*mut kernel::bindings::static_key`
found raw pointer `*const kernel::bindings::static_key`
note: function defined here
--> <root>/rust/bindings/bindings_helpers_generated.rs:33:12
|
33 | pub fn static_key_count(key: *mut static_key) -> c_int;
| ^^^^^^^^^^^^^^^^
To fix this, insert a pointer cast so that the pointer is mutable.
Link: https://lore.kernel.org/20241118202727.73646-1-aliceryhl@google.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411181440.qEdcuyh6-lkp@intel.com/
Fixes: 169484ab66 ("rust: add arch_static_branch")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There was a bug report [1] where the user got a warning alignment
inconsistency. The user has optimal I/O 16776704 (0xFFFE00) and physical
block size 4096. Note that the optimal I/O size may be set by the DMA
engines or SCSI controllers and they have no knowledge about the disks
attached to them, so the situation with optimal I/O not aligned to
physical block size may happen.
This commit makes blk_validate_limits round down optimal I/O size to the
physical block size of the block device.
Closes: https://lore.kernel.org/dm-devel/1426ad71-79b4-4062-b2bf-84278be66a5d@redhat.com/T/ [1]
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: a23634644a ("block: take io_opt and io_min into account for max_sectors")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/3dc0014b-9690-dc38-81c9-4a316a2d4fb2@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdkpwAKCRBZ7Krx/gZQ
632xAP0WukRCsROhDX1LsNXY+SF3E6znsO8VwjjHTDwZ+dGW6gD/f+KooaGG5qBU
4Z7sVuOIpOOA0S1LLDx8XBYidcG23g8=
=Aw1m
-----END PGP SIGNATURE-----
Merge tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs updates from Al Viro:
"ufs cleanups, fixes and folio conversion"
* tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
ufs: Convert ufs_change_blocknr() to take a folio
ufs: Pass a folio to ufs_new_fragments()
ufs: Convert ufs_inode_getfrag() to take a folio
ufs: Convert ufs_extend_tail() to take a folio
ufs: Convert ufs_inode_getblock() to take a folio
ufs: take the handling of free block counters into a helper
clean ufs_trunc_direct() up a bit...
ufs: get rid of ubh_{ubhcpymem,memcpyubh}()
ufs_inode_getfrag(): remove junk comment
ufs_free_fragments(): fix the braino in sanity check
ufs_clusteracct(): switch to passing fragment number
ufs: untangle ubh_...block...(), part 3
ufs: untangle ubh_...block...(), part 2
ufs: untangle ubh_...block...() macros, part 1
ufs: fix ufs_read_cylinder() failure handling
ufs: missing ->splice_write()
ufs: fix handling of delete_entry and set_link failures
