Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Tweak ordering to put the comment before we get the trigger type.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20240901135950.797396-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the id_table of inv_icm42600, so the device can probe correctly.
Signed-off-by: Jason Liu <jasonliu10041728@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20240902113101.3135-1-jasonliu10041728@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.
Cc: <stable@vger.kernel.org>
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This reversed if statement means that the function just returns success
without writing to the registers.
Fixes: 16531118ba ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/689a2122-6e2f-4b0c-9a1c-39a98621c6c1@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This code is using bmi323_reg_savestate[] and ->reg_settings[] instead
of bmi323_ext_reg_savestate[] and ->ext_reg_settings[]. This was
discovered by Smatch:
drivers/iio/imu/bmi323/bmi323_core.c:2202 bmi323_core_runtime_suspend()
error: buffer overflow 'bmi323_reg_savestate' 9 <= 11
Fixes: 16531118ba ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/7175b8ec-85cf-4fbf-a4e1-c4c43c3b665c@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When building with clang and CONFIG_PM disabled (such as with s390), it
warns:
drivers/iio/imu/bmi323/bmi323_core.c:121:27: warning: variable 'bmi323_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
121 | static const unsigned int bmi323_reg_savestate[] = {
| ^~~~~~~~~~~~~~~~~~~~
drivers/iio/imu/bmi323/bmi323_core.c:133:27: warning: variable 'bmi323_ext_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
133 | static const unsigned int bmi323_ext_reg_savestate[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
These arrays have no references outside of sizeof(), which will be
evaluated at compile time. To avoid these warnings, remove the CONFIG_PM
ifdef guard and use the RUNTIME_PM_OPS macro to ensure these functions
always appear used to the compiler, which allows the references to the
arrays to be visible as well. This results in no difference in runtime
behavior because bmi323_core_pm_ops is only used when CONFIG_PM is set
with the pm_ptr() macro.
Fixes: b09999ee1e ("iio: bmi323: suspend and resume triggering on relevant pm operations")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240910-iio-bmi323-remove-config_pm-guards-v1-1-0552249207af@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device
compatible strings with the exception of "adi,ad5337r". Since
adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C
devices from it making it only SPI devices. Update the titles to make
the distinction clear.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240910234440.1045098-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.
Add missing full-scale range array value.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the current implementation, the local variable field_value is used
without prior initialization, which may lead to reading uninitialized
memory. Specifically, in the macro set_mask_bits, the initial
(potentially uninitialized) value of the buffer is copied into old__,
and a mask is applied to calculate new__. A similar issue was resolved in
commit 6ee2a7058f ("iio: accel: bma400: Fix smatch warning based on use
of unintialized value.").
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 961db2da15 ("iio: accel: bma400: Add support for single and double tap events")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240910083624.27224-1-m.lobanov@rosalinux.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Corrected minor typos in the GPIO TODO document:
- Fixed "ivolves" to "involves"
- Corrected "boardfiles" to "board files"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Link: https://lore.kernel.org/r/20240925154657.38704-1-cvam0000@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With the change to cleanup.h guards, linereq_set_config_unlocked() was
collapsed into linereq_set_config(), but documentation referencing it
was not updated to reflect that change.
Update the reference to linereq_set_config().
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240924155624.230130-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
"assigned" and "assigned->name" are allocated in snd_mixer_oss_proc_write()
using kmalloc() and kstrdup(), so there is no point in using kfree_const()
to free these resources.
Switch to the more standard kfree() to free these resources.
This could avoid a memory leak.
Fixes: 454f5ec1d2 ("ALSA: mixer: oss: Constify snd_mixer_oss_assign_table definition")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/63ac20f64234b7c9ea87a7fa9baf41e8255852f7.1727374631.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If we remove a GPIO chip that is also an interrupt controller with users
not having freed some interrupts, we'll end up leaking resources as
indicated by the following warning:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'gpio'
As there's no way of notifying interrupt users about the irqchip going
away and the interrupt subsystem is not plugged into the driver model and
so not all cases can be handled by devlinks, we need to make sure to free
all interrupts before the complete the removal of the provider.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240919135104.3583-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch fixes typos in comments within the ALSA subsystem.
These changes improve code readability without affecting
functionality.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240924041749.3125507-1-yujiaoliang@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, if alsa development package is not installed on the user's
system then the make command would print a `pagefull` of errors. In
particular one error message is repeated 3 times. This error is returned
by `pkg-config` and since it is not being handeled appropriately,
repeated calls to `pkg-config` prints the same message again.
This patch adds check for alsa package installation. If alsa is not
installed, a short and consize error is returned. Also, it does not
affect the compilation of other tests.
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20240922225824.18918-1-abdul.rahim@myyahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the proper name for the pinctrl bank subnode, fixing:
pinctrl@9880: Unevaluated properties are not allowed ('banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'reg', 'reg' were unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
pinctrl@84: Unevaluated properties are not allowed ('ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'reg', 'reg' were unexpected)
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-7-0b20ed4f0571@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The meson6 atv1200 has a lot of dtbs check errors, but since
no active contributor have any boards with Meson6 SoC, plus
no upstream GPIO, pinctrl, clock, MMC... for that SoC either,
let's start decommissioning Meson6 support by removing the Device
Tree files first then remove the MACH_MESON6 in a second time.
If someone is interested in Meson6 support they should bring it back
along with a few more patches for upstream support of further
peripherals.
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-4-0b20ed4f0571@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Change uart-a-ao into uart-ao-a, to use the same naming convention as
the other uart devices.
Signed-off-by: Theo Debrouwere <theo.debrouwere@faytech.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240905181803.94127-1-theo.debrouwere@faytech.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Meson A1 temperature sensor has dedicated power domain so bind it
to the device node.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240710223214.2348418-4-gnstark@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF those
can be connected to various digital I/O pins.
Each of 6 PWM is driven by individually selected clock parent and
8-bit divider. The PWM signal is generated using two 16-bit counters.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240710234116.2370655-4-gnstark@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Retry the first read and write to downstream at least 10 times
with a 50ms delay if not hdcp2 capable(dock decides to stop advertising
hdcp2 capability for some reason). The reason being that
during suspend resume Dock usually keep the HDCP2 registers inaccesible
causing AUX error. This wouldn't be a big problem if the userspace
just kept retrying with some delay while it continues to play low
values content but most userpace applications end up throwing an error
when it receives one from KMD. This makes sure we give the dock
and the sink devices to complete its power cycle and then try HDCP
authentication.
--v2
-Add more details in comment [Jani]
-fix looping condition [Jani]
-optimize loop exit condition [Jani]
--v3
-Add comment explaining why the loop was added [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927060437.1422942-2-suraj.kandpal@intel.com
DSC does not support bpc under 8 according to DSC 1.2a Section 2
Requirements. Return an error if that happens to be the case.
--v2
-should be bit_per_component [Mitul/Chaitanya]
-Add reference to this restriction [Chaitanya]
--v3
-Add the bpc in which we see this warning [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926081327.1409518-2-suraj.kandpal@intel.com
Builds on big endian systems fail as follows.
fs/bcachefs/bkey.h: In function 'bch2_bkey_format_add_key':
fs/bcachefs/bkey.h:557:41: error:
'const struct bkey' has no member named 'bversion'
The original commit only renamed the variable for little endian builds.
Rename it for big endian builds as well to fix the problem.
Fixes: cf49f8a8c2 ("bcachefs: rename version -> bversion")
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the Novatek NVT touchscreen controller present in devices like
qcom/sdm845-xiaomi-beryllium-tianma.dts. Also, include the devictree
binding file in the MAINTAINERS file.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-2-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On coreboot platforms, a system framebuffer may be provided to the Linux
kernel by filling a LB_TAG_FRAMEBUFFER entry in the coreboot table. But
a coreboot payload (e.g: SeaBIOS) could also provide its own framebuffer
information to the Linux kernel.
If that's the case, arch x86 boot code will fill the global screen_info
data and this used by the Generic System Framebuffers (sysfb) framework,
to register a platform device with pdata about the system's framebuffer.
But later, the framebuffer_coreboot driver will try to do the same and
attempt to register a "simple-framebuffer" platform device (using the
information from the coreboot table), which will lead to an error due a
device with the same name already being registered:
sysfs: cannot create duplicate filename '/bus/platform/devices/simple-framebuffer.0'
...
coreboot: could not register framebuffer
framebuffer coreboot8: probe with driver framebuffer failed with error -17
To prevent this issue, make the framebuffer_core driver to not register
a platform device if the global struct screen_info data has been filled.
Reported-by: Brian Norris <briannorris@chromium.org>
Closes: https://lore.kernel.org/all/ZuCG-DggNThuF4pj@b20ea791c01f/T/#ma7fb65acbc1a56042258adac910992bb225a20d2
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Link: https://lore.kernel.org/r/20240916110040.1688511-3-javierm@redhat.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
That can be used by drivers to check if the Generic System Framebuffers
(sysfb) support can handle the data contained in the global screen_info.
Drivers might need this information to know if have to setup the system
framebuffer, or if they have to delegate this action to sysfb instead.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240916110040.1688511-2-javierm@redhat.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920151445.499933-2-u.kleine-koenig@baylibre.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
xol_add_vma() maps the uninitialized page allocated by __create_xol_area()
into userspace. On some architectures (x86) this memory is readable even
without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ,
although this doesn't really matter, debugger can read this memory anyway.
Link: https://lore.kernel.org/all/20240929162047.GA12611@redhat.com/
Reported-by: Will Deacon <will@kernel.org>
Fixes: d4b3b6384f ("uprobes/core: Allocate XOL slots for uprobes use")
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
spi-cs-inactive-delay-ns in dts is cs_inactive in spi core, and it maps
to DLYCS (Minimum Inactive QCS Delay) in QSPI Mode Register (QSPI_MR).
spi-cs-hold-delay-ns in dts is cs_hold in spi core, and it maps to
DLYBCT (Delay Between Consecutive Transfers) in QSPI_MR. That one can
be set to other values than 0 only if the chip is not in Serial Memory
Mode (SMM), it must be written to '0' however when in SMM.
Tested on SAM9X60 based board with FPGA implementing custom SPI Memory
protocol.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20240918082744.379610-3-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linear mode is only supported by the Zynq UltraScale QSPI controller,
so update the bindings to include two 'reg' properties only for the
Zynq UltraScale QSPI controller.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20240925114203.2234735-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/spi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
The change for the spi-npcm-fiu stands out in the diffstat because the
inconsistent formatting style of the platform_driver initializer is
fixed to match the other struct initializer in the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240925113501.25208-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
